DV6-6135dx white screen, blink codes

Similar Questions

• Pavilion dv6 questions white screen).

  A problem in class with the HP Pavilion laptops, white screen issues. Note right on my pavilion dv6 1 year that a black screen is natural every day. Here what I did to correct the current problem reinstall windows 7, install all updates, update BIOS and chipset and the same problem occurs every day. Anyone else have any suggestions what could be the problem? Any help would be greatly appreciated.

  Thanks in advance.

  Mike

  Hi David,

  I try now technical scanning it did not help. It gets worse! I'll send the laptop to HP for repair. It a good thing that I got a year extra 1 warranty when I bought this laptop. I was checking the sites online and cards mothers cost between $ 200.00 to $ 300.00. I also have problems with this laptop.

  Thanks for your help.

  Mike

• Re: Satellite A210 - white screen if I try to play COD 4

  Recently loaded COD 4 on my system, but get a white screen when you try to play the game after the success of the download.

  Windows experience side is 2.8. Is it possible this game on my laptop or can I do to make it work?
  I have 2 GB of memory, but 128 MB allocated for graphics I think, you can allocate more?

  Thank you very much.

  You're sense of Call of Duty 4?

  Before you try to play a game, you should check the system requirements first. You video RAM size can t be Exchange but I think 128 MB should suffice.

  Have you tried to update the driver of your laptop display? You can find it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Last but not least have checked if there is a patch for COD 4? If this is not the case, do it!

• White screen on dv6 series!

  Before all sorry if this topic already exists but I don't know if it's the same problem. I have a dv6-2105so and dv9091ea. They are both purchased in Sweden. They worked correctly until there was a problem during the start-up. When I try to turn them on, they have a blank screen. Its black and there is nothing else. Sometimes a HP logo appears and disappears. Several months ago, that my computer would sometimes stop suddenly, usually when the CPU usage is high. Dv9091ea didn't stop suddenly. Then a few weeks later, when I turned it on I got a white screen for the first time. I tried to turn it on a few moments later and it works normally, without any empty screen. But white screen continues to happen more often and now I can not turn one of them at all. Thanks in advance.

  Hi Playernum2,

  Please follow the steps described in the following Document and let me know the results so that we can isolate and identify the problem in a better way.

  Overview of how to solve problems when a computer is not Boot or Start Up correctly: http://support.hp.com/us-en/document/c01443371

  ! - Please click the White Star in the blue box to give CONGRATULATIONS if this answer was useful or accurate your question or problem.
  If my answer has solved the problem, please click Accept as solution button -!
  I am an employee of HP, but I do not speak for HP. The views and opinions I express here are mine.

• Studio 1535 with white screen and "ERROR CODE: 0321 LCD EDID - EDID EEPROM ACCESS IMPOSSIBLE.

  Studio 1535 (laptop with Vista and NOTE from the ADMIN: tag removed in accordance with the Service Privacy Policy > suddenly, showing no display a few days ago.)  I tried to unplug the power cord and the battery, and make a stop by pressing the power button, but none of these methods have had no effect.  I got nothing else than a white screen, but when I fix a monitor external, everything works fine on the external monitor.

  Also, I have the flashing volume control keys and I was wondering if this could be a clue to what is happening and what needs to be corrected?  The Mute key and the Volume up key flashing on and outside at the same time.  The low Volume key is regularly.

  Then I run the diagnostic test that I had "ERROR CODE: 0321 LCD EDID - UNABLE to ACCESS EDID EEPROM '

  No idea if this could be a backlight or LCD question, question of video chip or broken cable?    Thank you!

  Hi JITeglia,

  I suggest you to replace the LCD LVDS cable on the system first, since it is the cheapest part. If the system is still facing the same issue to replace the LCD screen.

• Browser is a blank white screen while strengthening through code?

  Every time that I'm stepping through code using the debugger in FB3 my browser is visually a blank white screen. All code runs correctly, while I do scroll I just can't watch the app as I do. As soon as I click on the button resume (F8) the screen attracts upward and is no longer a Virgin. I just reinstalled the flash debug player, so that's not the reason. I use Firefox 3. It would be very beneficial for me to be able to monitor the application visually while I step by step through the code. Any ideas why this happens? Incidentally, it is not newly happening its been like this for as long as I know.

  Thank you.

  Hello

  Yes, it's by the default Flex behavior for debugging flash player.  Flex suspends the Thread of Flash player running in the browser when it hits any breakpoint.

• White screen on Pavilion dv6

  Computer worked as expected until everything has started with a screen white when his waking from sleep or now on start.

  8.1 to win (all drivers and current software from the upgrade to 8.1) 64-bit running. Only one of something wrong besides the white screen is that the caps button light flashes.

  Hi Colbill,

  When you turn on the computer, on which you begin to press F11 repeatedly until the menu opens. If the menu is not coming try perform a reset.

  When you perform a hard reset, you must disconnect or remove all devices (USB).

  Thank you.

• Problem with the iPhone OS. Have to restore it several times and it now has white screen flashing with Apple logo

  Got my iPhone SE a little over a month since the Thailand of the Apple Store.

  First he couldn't restore entirely made from a backup so I had to delete all data and content then restored again. Then try to restore from a backup, still have problems (apps froze, failed to synchronize all of the apps, then tried to shutdown phone and glued on white background with the Apple logo).

  Try to third, I put my phone in recovery mode and restore as a new iPhone. All original content is now gone. Should it start again.

  Then small annoying problems occurred. For example, I could not find applications in the App Store, could not download new free applications, could not buy music on the iTunes Store app. It seems that Internet was frozen, when in fact it works always fine when try browsing on Safari. Facebook froze and could not push Home button to close App game graphics making static sound glitches but always disappear when him restart the application. Can't post photos on a social media application because my whole library of photos seems to be empty, when in fact he was always there. When I was taking pictures, the preview images were extremely blurry, and when checked in Photos app there is no trace of this photo that I took. I tried to close all the applications and open it again but the problem still persists. So I close the phone and restart it just to find that it stuck on the white screen with the Apple logo once more. Then, I took the phone to the Apple service provider. They restore the phone as a new iPhone for me and I had to start over once again. Only 4 days after this, my iPhone application suddenly found me a new unlock access code within 60 minutes without reason. I have to reset hard to solve the problem. And after that, the same day, my iPhone starts to blink on and outside and sometimes the white screen with the Apple logo appears.

  Whenever I said my problem of staff Support from Apple or the Apple service provider, they told me that it was a software problem. How can I when I do all these problems again and again from the beginning until now? Can anyone suggest me the right way to solve this problem? What problem do you think it's from? I can't take this anymore. I need a good show, not working iPhone undesirable. I can't keep it restore/reset/reboot over and over again like this. Please, help me.

  Sasawan

  You can watch some of my problems here on Youtube > >

  1 screen kept flashing white background with the logo apple and restart and turn off by itself. Sometimes I can go past lock screens, but it only last a few minutes, then it starts all over again > > https://youtu.be/tfygV57NmmY

  2 message when my phone push me to reset my unblocking reason code > > https://youtu.be/a_AKPWxfAfs

  3 static glitch sound on the Sims Freeplay game > > https://youtu.be/qw12RZ4yMqc

  Take it to an Apple Store for the assessment of the guarantee.  If you have restored to factory settings, and these problems persist, there is a hardware problem, no matter what you' re said.

• MacBook pro white screen A1502

  I have macboook pro a1502. When I start the computer, I have white screen... And I expect in 5 minutes, the light of the LCD is on... But the screen remains white. I try to press the power button / stop + ctrl + opt + r + p no effect. I don't know how to try again. In my city no call center and I don't know where to fix my mac. I have in the West of Padang, sumatra Indonesia... Sorry my English so bad... Thank you

  Your Mac can do the simplest thing is to start with the down Option. This code here everything in ROM, and if you get the chime, your processor and a bit or RAM work as well.

  Startup option (also known as the name of the Boot Manager) draws a blank screen, then during several minutes, adds an icon for each potentially bootable Volume. If your drives are always answers and seem to be bootable, you should get two icons, one for Macintosh HD and one for recovery. If you have a heating engineer/DVD in the drive, which must also be indicated.

• C50D-a satellite won't boot cursor static white screen

  Hi my laptop to the top powers, but do not start. All I get once it is consumed on is a white screen with a STATIC cursor top left. It won't go any further than that.

  I've read about problems with a white screen flashing cursor in the top of the left black screen of death. But my cursor does not blink.

  I tried all the solution suggestions given to the white screen of death and nothing. I tried to change the ram nothing. Hard drive is fine, it has been read and consulted in a desktop machine.

  I tried to ram on its own in housing individual and noticed that ram not placed in 1 location I get black screen no cursor.

  On his own in the other powers, but all I get is this accident of static cursor.

  Any suggestions will be greatly appreciated
  Please only credible suggestions and responses

  Ty

  Steve.

  Looks like the BONE is damaged.
  Hold down F12 for the power upward and select HDD Recovery.
  Update a Windows. (The reset will erase your data).

• Satellite L750 sometimes lit with white screen after hibernation

  When I got the system, sometimes awake hibenate with white screen!

  I noticed, when this happened, 'toshiba eco utility' is frozen.
  So, I think that: Toshiba Eco Utility is crushed, put into hibernation system and the awakening of the race, but screen blink.

  This time I push the power button, the system go to sleep and next push is normally awake!
  I don't know why. I use this app Eco Utility, but I'll delete it.

  Anyone?

  You deleted the Toshiba eco utility of the system now?
  Did you notice the same problem when you Hibernate your laptop using other profiles of power?

• White screen and beeps when turn on Satellite 3000 X 11

  Can anyone help? A couple of times in recent weeks my Satellite 3000 X 11 itself has turned off. However, it then displays a white screen when I turn it on and 3 beeps followed by 3 beeps of x x. The power led & battery lights on and the hard drive flashes once - fan does not work - it happened to someone else? Or can someone suggust cause and remedy? Thank you
  Tim

  HI Edward,.

  Beep codes are indications that the unit doesn't have his POST processing. The exact cause can only be diagnosed by a qualified Toshiba service agent.

  In regards to your hard drive, will find it this located below your optical drive that must be removed first. Remove the screw (F5) the appliance and slide the optical drive before that. You will then be able to access the hard disk.

  Kind regards

• White screen on my Satellite M34-S456

  -Do not know how - I managed to reload Windows XP Professional on my Satellite M34 S456.
  I got a white screen with a blinking cursor in the top left of the screen for days.
  Try of BIOS (via F12 F2 &) & kept getting the white screen).

  Now that is reloaded. How can I know what is the problem?
  And how can I prevent or fix?

  For example, if it is a problen w / my HARD drive (I'll buy a new HARD drive) vs my CD/DVD, etc...

  Any suggestions?
  I have a feeling that the problem is not resolved, & as soon as I stop I get the blank screen again.
  FYI-I think that put the HARD drive in the freezer for the night may have been key to get there surgery - seriously.

  > - Don't know how - I managed to reload Windows XP Professional on my Satellite M34 S456.
  > I got a white screen with a blinking cursor in the top left of the screen for days.

  This symptom of the computer appears generally if the master boot record (MBR) on the hard drive is bad or damaged.
  It may happen due to the mechanical stress of HARD drive.

  I had the same problem several months ago and solved using the command: fixmbr or fixboot

  Concerning

• Just as a reference: how to FIX the annoying 'White Screen Of Death"with Silverlight and"Access denied"error with computer management.

  Well, I just hope that someone who has met these two mistakes will find my dose. It might save a lot of pointless research on the net.

  SYMPTOMS:
  -When you try to open a Silverlight application in your browser (Firefox, Chrome, IE, etc), your browser displays only a white area. When you right click on the white area, you can click on the Silverlight properties.
  -If you try to start "Computer management" by clicking on the 'My Computer' icon and select 'Manage', you get the following error: 'access denied '.

  CAUSE:
  The following errors are usually the result of a bad environment variable. In this case the "windir" environment variable does not work correctly. You can try running the management of the computer to start > run and entering:
  %windir%\system32\mmc.exe/s %windir%\system32\compmgmt.msc

  Notice the between the characters of percentage windir environment variable. If you run the above code, you will probably get an error saying that MMC cannot open the file. Look closely at the path, it's back!
  You will probably find any % somewhere.

  What actually happened here is the variable windir made reference to another variable: systemroot
  Why this creates problems, I'm not sure. Also, I don't understand what made then variable windir change.

  SOLUTION:
  -From your desktop or Explorer: right-click on "My computer" and select "Properties".
  -Click on the "Advanced" tab and then click "Environment Variables".

  http://pcauthorities.com/images/advanced-system-properties-XP.jpg

  -Did the windir variable. Together to "C:\Windows" do not think that it is already set to "C:\Windows", because windows then tells you. Double-click it to know for sure.

  http://www.adminxp.com/windowsvista/envvariabl.PNG

  -See, I told you! Change this to "C:\Windows".

  http://www.adminxp.com/windowsvista/editenvvar.PNG

  Hi Jooch,
   
  Thanks for posting such a detailed response, including symptoms, Cause, and resolution to "White Screen Of Death" with Silverlight and "Access denied" error with computer management"issues.
   
  I appreciate your time and effort to do the same. This could help other users of the forum as well.

• Temporary white screen

  Product name - HP Pavilion dv6-3210us

  Operating system-Windows 7

  Problem:

  There is a flicker, and then a white screen will appear. I have to close my laptop, wait a few minutes, and then turn it back on. The first time I had to do this, it is entered chkdsk and checked the drive C, deletion of some corrupt files. The last time he started chkdsk but then the user login screen instead. I thought that maybe the graphics drivers were not good, so I tried their update but the problem persists.

  Hello sturges014,

  Your screen turns white.

  Go to Device Manager and uninstall the graphics card. Restart the computer.

  This uninstall and reinstall the driver from the GUI.

  Here is a link to the Device Manager.

  Check if you are still having the problem.

  Do a hard reset.
  Turn off the computer.
  Remove the power cable and battery.
  Hold down the power button for 15 sec while booth energy sources are deleted.

  This should reset the hardware in the computer.

  That you put it on press the F10 key. This will load the BIOS setup utility.

  If you meet him problem on the screen of your hardware is off on the computer.
  Press F9 to load the default values.
  Press F10 to save and exit.

  If you had the problem in the BIOS, you can connect an external monitor to the laptop to see if the problem is with the monitor or the graphics.

  If it doesn't happen on the external monitor, you will need to replace the display on the laptop.

  I would like to know how everything goes

  Nice day.