Dv6 HP-ENVY: I cannot adjust the brightness of the screen

I can't reduce the brightness of the screen
Even by FN + F2, F3
I have a HP "dv6 HP-ENVY.

may be the promblem with battery
Help, please

Thank you

Hello

Your language is good enough, don't be sorry

Your Support page is not a listed Intel graphic driver. Your laptop came with 64-bit Windows 8 & I guess you clean installed Windows 7 64 bit, right?

Your laptop has Intel/NVIDIA switchable graphics system. In this case, you can install the Intel graphics driver first & then NVIDIA driver HP supports the page. for example,.

You can try this graphics driver Intel Intel directly. Download, save & install it. Restart the system.

Then download, save & install the NVIDIA graphics driver. Reboot the system after installation of finishing.

Check whether the problem is resolved.

Concerning

Visruth

Tags: Notebooks

Similar Questions

  • Cannot adjust the screen resolution

    I tried to reset the setting on my resolution for my windows monitor XP WITH SP1, boots upwards in mode 4 by default bits. I'm under System 32 and before I tried to download updates for SP2, WAS in MEASURE of HAVING 16 BIT COLOR, cannot adjust the screen resolution, it is locked on 640 x 820. How can I fix it?

    Hello

    What Dell? Dimension? OptiPlex? Inspiron? Others? In the meantime, I'm looking to see if there is only a single 2300.

    I repeat...

    You just do a new installation of a Windows CD?

    If you have, you will need to install all the drivers concerned material, including graphics drivers.

    Click on start, run, then type devmgmt.msc and press ENTER. In Device Manager there devices not identified or marked as having a problem (marked with!)?

    Tricky

  • Cannot adjust the brightness after display driver update on Satellite L855-118

    Hello.

    I just bought a SATELLITE L855-118, with ATI graphics card today, it was between this and another of them, but I know that you have problems updating graphics drivers on a portable Sony.

    I did a restore point.

    So I uninstalled the ATI catalyst graphics card and then did a sweeper driver and rebooted and then installed catalyst 12.6, installed fine, but my screen went to the maximum brightness and I can't adjust, BRIGHTNESS osd is displayed but the brightness of the screen does not change.

    So I used my restore point.

    This time I crushed the catalyst 8.9 with 12.6 stock, still cannot adjust the brightness.

    Someone knows how to solve this problem.

    My spec full in the link below.

    Satellite L855-118 - product specifications - Toshiba

    Thank you

    John.

    You mean that you can not use the Fn or Fn + F6, F7 button combination?
    Do other combination works properly?

    Also check this doc:
    http://APS2.toshiba-tro.de/KB0/TSB11033A0000R01.htm

    There is a brightness.zip that installs the additional registry key

  • Pavilion 15-r004ne: cannot adjust the brightness of the display

    I m using the Pavilion 15-r004ne on a windows 64-bit OS 8.1 and I cannot adjust the brightness of my screen. I tried to adjust by shortcut keys F2 and F3, tried adjusting via the mobility Center, tried through Control Panel and so on, but no response until now. It shows the little pop-up when I press the keys. But nothing has changed, the brightness of the display remains the same. in order to get solution soon.

    Thank you for your support. It didn't work either. I solved the problem of roll back the driver and update again.

  • Cannot adjust the brightness in Windows 7

    I have recentlly installed win 7 rc on my G530 and I cannot adjust the brightness and more. I have download the hotkey driver features that now allows me to adjust the volume and everything but the screen brightness... y at - it a specific driver, I need to download for this? Thank you.

    Nevermind I solved this isue. I have download Lenovo Hotkey features and executed the file as administrator with Vista compatibility mode:

    http://www-307.IBM.com/PC/support/site.WSS/MIGR-68000.html

    problem solved. I also updated the bios.

  • Re: Satellite L855 and Windows 8 - can't adjust the screen brightness

    Hello world!

    I installed Windows 8 on my L855 Satellite and it is running pretty well except that I can not adjust the screen brightness. I have updated all drivers for win 8, but it does not solve the problem.

    Hope someone can help me! Thank you!!

    Can you do this using the settings in some diet plan?

  • Trying to repair XP Home CD, but cannot access the screen where you choose to repair or install fresh.

    Trying to repair XP Home CD, but cannot access the screen where you choose to repair or install fresh.

    I get the first screen where you have the choice to configure windows or press 'r' for recovery console.

    After I press enter for the installer, do not me the usual on-screen next where it is said that if the following XP installation is damaged, you can repair it.  Instead, it leads me to a screen where it shows my partitions and asked that one I want to install windows on.  If I choose "C:" he then told me that there is already a system opperating on the partition...

    Hello

    Follow the steps of "Error Message: Setup cannot set the required Windows XP Configuration Information.
    ' http://support.microsoft.com/kb/316425 '.

    Diana

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Cannot run the screen saver because it requires a newer video card or one that is compataible with Direct3D.

    Hello

    I recently rebooted my computer; (Packard Bell) and now cannot run games or screen savers because it does not start. I think my problem has something to do with a Direct3D card? When I run screensavers, I get this message:
    Cannot run the screen saver because it requires a newer video card or one that is compataible with Direct3D.
    I have the impression that sound when I run the 3D games, such as minecraft or GMOD.
    I run on Windows Vista Edition Home Premium and does not do anything but re - install my computer because it wouldn't start.
    It is not as if the graphics card is not there, so I'm really confused!
    Please help me, like playing games is my favorite thing. ;)
    Charlie
    I also ran minecraft to double check and I got this error code:
    Bad video card drivers!
    -----------------------
    Minecraft could not start because it did not find an accelerated OpenGL mode.
    Generally, this can be corrected by updating the video card drivers.
    -BEGIN 7fe0271 error REPORT-
    Generated 10/10/12 21:04
    -Minecraft Version: 1.3.2
    -Operating system: Windows Vista (x 86) version 6.0
    -Java Version: 1.7.0_07, Oracle Corporation
    -Version Java VM: Java hotspot Client VM (mixed mode), Oracle Corporation
    -Memory: 422585352 bytes (403 MB) / 518979584 bytes (494 MB) up to 1037959168 bytes (989 MB)
    -JVM Flags: 2 total; Xms512m-Xmx1024m
    -LWJGL: 2.4.2
    -OpenGL: ~ ERROR ~ NullPointerException: null
    -Is Modded: Probably not
    -Type: customer
    -Texture Pack: ~ ERROR ~ NullPointerException: null
    -Position profile: N/A (disabled) [can't get system (java.lang.NullPointerException) properties]
    org.lwjgl.LWJGLException: Pixel format not accelerated
    at org.lwjgl.opengl.WindowsPeerInfo.nChoosePixelFormat (Native Method)
    at org.lwjgl.opengl.WindowsPeerInfo.choosePixelFormat(WindowsPeerInfo.java:52)
    at org.lwjgl.opengl.WindowsDisplay.createWindow(WindowsDisplay.java:185)
    at org.lwjgl.opengl.Display.createWindow(Display.java:311)
    at org.lwjgl.opengl.Display.create(Display.java:856)
    at org.lwjgl.opengl.Display.create(Display.java:784)
    at org.lwjgl.opengl.Display.create(Display.java:765)
    at net.minecraft.client.Minecraft.a(SourceFile:233)
    at net.minecraft.client.Minecraft.run(SourceFile:516)
    at java.lang.Thread.run (unknown Source)
    -REPORT of ERROR END bb61788b-

    Hello

    After you reinstall the operating system, you should also go to the website of your computer manufacturer > drivers download section > put your computer model number > search for your operating system and drivers (graphics, audio, etc.) > download and install.

    See you soon.

  • HP Pavilion Dv6 Notebook PC: Cannot adjust the brightness/contrast

    Hi all

    After a new installation of Windows 7 64 bit Home Premium on my HP Pavilion dv6, I find that I can't adjust the brightness/contrast of the screen. Initially, I had installed a generic pnp Monitor driver, but after reading a solution which recommends to uninstall, I did, but to no avail. I have also tried installing HP Support Assistant, scanned my laptop computer for outdated drivers and have installed the recommended drivers, but I am always faced with the same problem.

    If you provide me with any details on my laptop, let me know.

    Thank you.

    Hello.

    I realized later that I had 215 updates of windows install. After I did, the problem solved itself, but I think that among the updates has been one for the graphics driver.

    Thanks for your response!

  • 15 - r254nu:. Cannot adjust the brightness on Windows 8.1

    So I tried different ways to resolve this issue, but again the light cannot be turned on/off. Help, please!

    Hello:

    There are two Intel driver links to the choices on your laptop support page.

    I explored the folder of the driver of this driver file to support your laptop and driver page, and it is suitable to use driver.

    This package provides the driver that allows graphics Intel high definition (HD) in the notebook models that are running an operating system supported. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

    File name: sp69589.exe

    The hardware ID for the Intel graphics card in your laptop must be one of these...

    ;=====================================================================
    ;    Windows 8.1 install
    ;=====================================================================
    [IntelGfx.NTamd64.6.3]

    % iVLVGMT0% = iVLV2M_w81, PCI VEN_8086 & DEV_0F31 & SUBSYS_220F103C
    % iVLVGMT0% = iVLV2M_w81, PCI VEN_8086 & DEV_0F31 & SUBSYS_2213103C
    % iVLVGMT0% = iVLV2M_w81, PCI VEN_8086 & DEV_0F31 & SUBSYS_2210103C
    % iVLVGMT0% = iVLV2M_w81, PCI VEN_8086 & DEV_0F31 & SUBSYS_2214103C

    You should see a device from Intel HD graphics instead of the graphics card base of Microsoft, and unless you can get the graphics driver to install you will not be able to adjust the brightness of the screen.

    Is the above driver do not install the Intel graphics card automatically, try to install the driver manually by navigating to the folder of the driver that is created after running the above file.

    Confirm that the hardware for the Intel graphics card ID matches one of the above since the driver installation information file that I posted.

    To find the ID of the hardware, Device Manager, click the graphics card Microsoft Basic.

    Then click on the Details tab in the upper part of the window Microsoft Basic graphics card.

    Now you should see a drop-down list of property and it is set by default to the Description of the unit.

    On this list and select the 3rd point (Hardware ID).

    Confirm that the hardware ID, you see there is one of those listed that I posted.

  • Unable to connect to wifi and cannot adjust the brightness in hp pavilion 1322tx g6

    Hello guys. I can't connect to wifi after that I installed win 7 64 bit on my hp pavilion 1322tx g6. Wireless light stays red. He is not white. and I can't adjust the brightness too. the same operating system works very well on my desktop. in the Ethernet controller network controller driver manager and other things are missing. Win 8 64-bit work very well on this laptop. Please someone help me...

    Operating system Windows 7 does not have drivers for the hardware of this unit. your office may be a little older had so drivers win7 disc itself. also windows 8 has most of the current hardware drivers, it works well too.

    for win7 64-bit, you must download all the drivers from hp.com and install on your laptop.

    Here's the direct link...

    http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=5227785&prodTypeId=321957&prodSeriesId=5186808&swLang=13&TaskID=135&swEnvOID=4063

    Incase you have trouble in direct link, here are the steps to download drivers for your PC.

    Hello

    Please visit www.hp.com/in and click on support & drivers > drivers & software > type the full model of your PC as the 6100 dv6 dv6-3100 etc... Select your computer model (if the list), or model CTO (for example, dv6-6100 CTO) (who works for the series) now select the operating system you are running. you have the list of drivers for your PC.

    I hope this can help, good luck!

  • Cannot adjust the brightness of the screen after Windows 8.1 update

    Hello

    After you have installed Windows 8.1, I can't adjust the brightness of the screen more.  I checked and updated all the drivers and nothing helped.  There used to be a brightness slider in the control panel in the power settings.  It's over now.  I've looked everywhere for a solution, but I can't seem to find it.  Any help would be greatly appreciated.

    Here are the specs of my computer:

    HP Pavilion 23-F213W Smart Touch

    Windows 8.1

    Thank you

    Many All in One computers are able to use HP MyDisplay in this http://www.portrait.com/dtune/hpc/enu/index.htmlplace.  There is a list of maps videos supported on this page and should help to restore the video controls setting.

  • I cannot adjust the brightness of my screen

    I can't adjust the brightness of my screen...
    Please help me

    Hello

    Try to use Recovery Manager to reinstall your particular graphics driver (AMD, Nvidia, Intel etc.) - the procedure to use the Recovery Manager to reinstall the drivers and software is detailed in the document in question on the link below.

    Recovery Manager - Windows 8.

    Recovery Manager - Windows 7

    Recovery Manager - Windows Vista

    After reinstalling, restart the laptop.

    Kind regards

    DP - K

  • Laptop HP Pavillion: cannot adjust the brightness

    I can't adjust the brightness on my laptop.

    I tried;

    01 method.

    Open Control Panel, click hardware and sound, and then in the Section of Power Options, click

    "Change the energy saving settings. There is a slider to adjust the brightness at the bottom of the window.

    Method 02.

    Open Windows Control Panel, open the Windows Mobility Center and the brightness here

    Method 03.

    On most laptops, pressing F3 and F2 key often will increase and decrease the brightness of the screen

    None of which work.

    Please, try to install the graphics driver (which is applicable) and check if it works, here is the info pilot.

    NVIDIA Graphics Driver: http://ftp.hp.com/pub/softpaq/sp72501-73000/sp72872.exe

    Graphics of AMD driver high definition (HD): http://ftp.hp.com/pub/softpaq/sp71501-72000/sp71980.exe

    or

    Intel graphics driver high definition (HD): http://ftp.hp.com/pub/softpaq/sp74501-75000/sp74697.exe

    You can also try with HP Support Assistant: http://ftp.hp.com/pub/softpaq/sp74501-75000/sp74656.exe

    Concerning
    Smail
    Hewlett-Packard

    Click on "Bravo Star" icon on the left side so resolute.

    I am an employee of HP, but the comments in this forum is of myself and is not HP

  • Qosmio G30-140 - cannot adjust the brightness of the screen on Windows 7

    Hello

    I installed Windows 7 on my Qosmio G30-140, but I can't adjust the brightness settings.
    Instead of allowing me to place the cursor on any position, I want that I'm stuck with only 3 steps which elect to.
    The last of them is way to bright and my eyes keep tear having to deal with this crazy amount of white, especially on white background.
    The other two are very, very dark.
    What is going on? I installed the right Nvidia drivers.
    Also, I can't adjust the brightness using the FN keys on my keyboard. They simply produce no result at all.

    Need help appreciated, I can't work like this.

    Thank you!

    Hello

    The brightness of the display can be controlled by the FN + F7 and Fn + F6.
    I think you should install the VAP and buttons of the Support of Flash memory card utility in order to get this to work!

    Check the added value Package and Support Flash Card which are released for Satellite L500 utility or new models of laptops.
    In my case it worked!

Maybe you are looking for