DVD and CD playback jerky and delay

Similar Questions

• Satellite P100-188: his stuttering & distortion during playback of DVD and CD

  Hello

  My laptop has developed for the second time, what I can only describe as "stuttering and distorting" during playback of dvd and cd try to burn or rip a cd does not work either.

  The first time this has happened was a few months ago and PC World did a reinstall of windows that solved the problem. It is now again.

  Any help would be much appreciated.

  and why you n t try to reinstall the OS again?
  Seems to some operating system files or registry entries are corrupted.

• video play back is choppy and delay

  I was brought a HP Pavilion Entertainment PC dv7

  Intel core I7

  8 G of RAM

  Double hard dr 500G each

  Whenever I tried to play a dvd movie, that reading in the first 3 minutes is not serious, and then it becomes unstable and developmental delay, and eventually, it is impossible to watch it at all.  Is there anyway that I can fix this problem thanks.

  This laptop is less than ideal; from the date I bought it until now I didn't have problems one after the other. It was first the blue screen crashes regularly then after upgrading the Bios now, I have trouble with the dvd read.

  The video playback is choppied and late development. I had tried every sugguestion according to their Web site "fix it", but still it is not working properly.  This supposed to be an entertainment PC system, and I can't still play an ugly dvd and let alone no matter what else.  HP used to have good quality computer products but this portable experience I had endured put serious doubt in my future purchase of HP product.

  Thanks for the information. I know that the graphics driver you are using now creates the same problem with my Blu - ray movies.

  The film would freeze while the audio should continue and sometimes it would break.

  This solved my problem

  http://www.nvidia.com/object/notebook-Win7-WinVista-64bit-257.21-WHQL-driver.html

  Also, try to use Windows Media Player, if you're not already do, but I think that the new driver I gave you is the key.

• The CD/DVD-rom won't play game, just the DVD and the CD disc.

  Hello. My CD/DVD-ROM won't play the game disc, I have problem with the two "Deer Hunter Tournament', and"The Settlers - rise of an empire". But this station want to write write CD, DVD, and CD playback, so I can listen to music and watch a DVD movie.

  But why my CD/DVD-ROM do not load the game disc?

  I still have the problem, the brackets must be the answer given that these two works of disk on other computers of game.

• Rendering of the DVD and burn: differences between Premiere Pro and Premiere Elements

  I'm Photogaphy landscape and wants to create slideshows in Premerie or import them at 1080 H264 quicktime files generated by Ligthroom 3 first.  I do not make frame-by-frame video editing.  My only goal during the first use is to be able to return or to burn DVDs and finally Bluetooh compatible DVD for playback on TV commercial flat screen, for example, Samsung flat panel dvd.

  Are the DVD rendering and burning capablity of first Pro CS5 and first 9 equivalent elements, IE, which are both likely to produce DVDs that render with natural colors on commercial flat screen TV?

  • My previous experience is that my generated 1080 Lightroom, quicktime H264 movies have perfectly natural color on Mac LCD and other computer screens but see even on a saturated on commecial color flat panel TV.
    
  • Discussions with Adobe tech support people are contradictory on this subject.

  Still is no longer a stand-alone program and is only available with PrPro from CS3. In addition, due to lack of license, the 'trial' of still basically is disabled. Don't even think that you can make a form any try-out, but maybe some features in Encore CS5 has been added. The limitation is that no PrPro Adobe, or trial still has any abilities MPEG-2 - only with fully-paid version. I'm sorry.

  Good luck

  Hunt

• DVD (and iDVD) die?  If so, what is the alternative?

  Hi all

  I LOVE iMovie 6 (iMovie HD) and iDVD.  I was use to edit and produce my own films at home for years.  I like to create DVDs from pleasure and share with my family and my friends.

  The problem is that it seems that the days of DVD are numbered...  New computers come with a DVD player, and most people do not use their DVD players a lot more thanks to streaming services such as NetFlix, Hulu, Amazon, etc...

  So my question is this: a DVD player will soon be like old VCRs that some of us still have?  Large boxes, collector of dust, but we can not totally get rid of them because we have a few VHS tapes favorite that we "might" want to play some time?

  If DVD and DVD players disappear...  What will I do with my movies at home?

  I understand that I could post them on YouTube, but this seems crazy, because I have a lot of home movies!  In addition, I really like the features of a DVD as chapters and be able to create a DVD with several individual films on it.

  What I would REALLY like is to be able to create a "DVD", but store it in a flash drive and then a program or something that allows you to my friends and family get the flash drive on their smart TV (or computers) and allow them to access the 'DVD' as if there were a real DVD with all the options of origin that would be available on a disc.

  Someone you understand what I mean?  And if yes, does anyone have any ideas or suggestions for the future of the movies at home after the death of DVD have?

  Thank you!

  Lincoln

  Agreed.

  https://discussions.Apple.com/docs/doc-3673

  To burn a DVD with the latest version of iMovie's iDVD, you must export the movie using the export button and select 480 p as the size. Open iDVD and start a new project, and then drag this file in the sequence exported to iDVD menu window, avoiding the drop areas that see you.

  If you are using El Capitan see this thread:

  https://discussions.Apple.com/thread/7251191

• How do I burn a file .img to a DVD and have it be an executable file?

  How do I burn a file .img to a DVD and have it be an executable file?

  It seems that used to be possible using disk utility, but not more for some reason any.

  Hi Frank

  Not sure, what do you mean by executable video file, assume you mean play on a DVD player.

  You create an image file to DVD in iMovie, FCPX etc... This allows the correct coding and the structure files for DVD, s / BDs.

  Once you have the .img file, you can (control) click on the file and choose ' burn Image 'File name' disk drive...» »

  Be aware that you need a R/W drive mounted/Secretary for the contextual elements appear. If you have a Blu - ray image, you need a BD player. Your file must be less than 4.7 GB for single DVDs faces or ~8.2GB for the DVD DLs. to 100GBs for quad layer BDs.

  There are other 3rd party there as well.

  Hope this helps, Greg

• Portege R700 - no autorun for CD/DVD and USB keys

  In my Portege R700 there is no way to make autorun works (for key USB and CD/DVD as well). CD/DVD and USB keys work perfectely, but not the autorun.

  I tried to use both the automatic repair of Microsoft and PowerToys, but the problem that it is still there. I also tried to change the registry, but it seems that the changes are not retained. I suspect that it is something related to some utilities or so.
  Can someone help me?

  Thanks in advance.
  Gerlando

  Hey,.

  > I suspect that it is something related to some utilities or so.
  What utilities you have installed? Theoretically, they could block the autorun

  Normally if autorun doesn t work on XP, you can enable it in the Windows registry:
  Start > run > regedit

  The registry editor will open and go to:
  HKEY_CURRENT_USER / Software / Microsoft / Windows / CurrentVersion / policies / Explorer
  Double-click the NoDriveTypeAutoRun value and set the value of 91.

  Now he must navigate to:
  HKEY_LOCAL_MACHINE / SYSTEM / CurrentControlSet / Services / Cdrom

  Double-click the AutoRun value and set the value to 1.

  Now restart your computer and try it again, usually autorun should work again.
  Additionally, make sure that the latest Service Pack is installed for XP (SP3).

• Problem reading DVD and CD - RW on the Satellite 1800 412

  HI -.

  My laptop has recently stopped playing all DVD and CD - RW - ordinary CD work fine, but when I try to play a DVD or a CD - RW it whirs for a while, then I get the message "Windows cannot read this disk. The disc may be damaged, or it could be in a form that is not compatible with Windows.

  I use a Satellite 1800-412, Windows XP (home edition) Service Pack 2, and the DVD drive is a SD-C2502.

  I watched the updates of the firmware of my drive to http://www.toshiba-europe.com/storage/index.asp?nav=HOM&page=HOM&frame=home as this is often recommended for problems of this kind on this forum - but not all are available.

  Any suggestions?

  Thanks much :-)

  Hello

  I read on some sites that doesn't update the firmware solves this problem.
  I recommend you to remove the drive from Device Manager.
  After restarting again the operating system should recognize the drive again. Perhaps this procedure will help you solve this problem.

  Concerning

• Qosmio G20 running slow on DVD and music

  My G20 110 is very slow when playing DVDs and music CDs. Note that it runs slow on reading music, which is preloaded on the hard drive. I checked the speed of reading and it is normal. Any help would be appreciated. Help!... Kenn

  Hello
  If you have an up-to-date virus scanning program and scan your system. Then go see Adaware personal and start a new search. If these do not work, try to reinstall windows with the supplied with the system recovery cd. At this point, I would like to know how is the computer. This should restore normal operation however speed and don't forget to back up data before restoring from CD

• Re: My driver TEAC DV-w28ECT used to read DVD and CD now it reads only DVDs

  My TEAC DV-w28ECT driver used to read DVDs and CDs, now, he reads only DVDs. What's happened and how can I solve this problem? I have Windows Vista

  Try to remove the CD/DVD filters in the registry.
  When the associated CD/DVD (such as iTunes, Nero, virtual CD software), the software is installed, they install filters in the registry, which can cause compatibility problems.

  (1) run Regedit (start-> Run-> Regedit)
  2) navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  (3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
  (4) restart.

  If your CD/DVD programs stop working, you will need to reinstall them (preferably with an updated version).

  This utility can remove the filters for you:
  http://www.CSD.Toshiba.com/content/support/bulletins/su2065061/RmvFltrs.exe

• If I buy a macbook pro, how can I open a burning all my old projects DVD and how can I burn CD from my itunes playlist?

  If I buy a macbook pro, how can I open and burn all my old projects DVD and how to burn cd from my itunes playlist?

  To burn iTunes:

  GO to iTunes > help > using iTunes and search for burn and go to burn CDs and DVDs

  Try to publish the iDVD forum to burn old iDVD projects since Apple dropped to iDVD a couple of Mac OS x versions there are.

  iDVD

  The latest model MacBook Pro do not come with a DVD player if yo are going to need an external

• DVD - RAM on Tecra A2 do not read DVD and CD

  Hello world

  I mast * one DVD-ram UJ-820 s, who do not read my DVD but reads CD. I reinstalled my OS to see changes, even without hope. I burned an operating system on a DVD and try to boot from the DVD and somehow it works, but when it goes to windows it stop reading any disc and shows me that the disc is empty.
  Any suggestions please?

  Did you receive any error messages?

  I searched for tips on the Microsoft Web site and found this two links:
  How to troubleshoot CD-ROM or DVD - ROM read problems
  http://support.Microsoft.com/kb/218617/en-us/

  How to troubleshoot issues with reading CD, CD - R, CD - RW, and DVD discs
  http://support.Microsoft.com/kb/321641/en-us/

  Maybe it helps.
  Otherwise, I think the reader will slowly until the end of life

• Help with DVD and CD ROM msg needs Attention

  Never seen this message before when running VAIO Care a click but under maintenance contract section DIAGNOSTICS EQUIPMENT VAIO
  I have 2 separate messages which read DVDROM requires Attention and money he needs attention CDROM both with the yellow triangle of 'warning '. The message say absolutely nothing more to this topic or suggest a fix now button or link info more and I don't know what that may be the problem (s) or where to start even. I do not see this question discussed everywhere here and nothing of value comes from google either. Please help me made in the right direction.

  I have to mention my unit is in a VPCL114-FX and is also Blu - Ray

  Mod_VAIO F52M wrote:
  > USER-931287.
  >
  > Can you please check the Device Manager and expand "readers of CD-ROM/DVD-ROM" the
  > optical drive can be disabled and we simply allow him.
  > OK, thanks for the answer... I did check the Device Manager and sees all problems reported and even tried to update the CD player, but said that it was up-to-date so I don't know what I should look for then. See, most recently, I had to reinstall a few updates for Vaio Care not installing correctly automatically and although he has cleared up the initial problems with a patch of Self Heal and a update for IntervideoDVD that would not install it gave me these warnings of DVD and CD ROM that I've never seen before in prΘcΘdentes Vaio Care One Click. It is a kind of new added to just alert courtesy warning me that I must check the following points and most of the time can be ignored, or is it a real alarm of a problem.

  Unlike other caveats and bugs discovered by VAIO CARE this warning has no additional information as to what it can be difficulty and get rid of the warning indicators. See I'm a novice when it comes to records and others, but my all in one computer is only a year and a half, so if there is a problem with it I would like to know for sure, find and how to fix it. This computer is the first computer, I never bought where they send you the utility service, manuals, disks received, etc. with the unit so I have to be sure to make a change before even trying it but this one is just eluding me b/c I don't know where to look, or once found 110%, what I should see. Any help would be greatly appreciated. Thank you.

• CD/DVD drive reads all formats of DVD and regions

  Hello
  My Teac-dw-224th-a bed not all formats DVD and regions.
  It reads CD but not DVD at all.
  No DVD - R and DVD not yet regular. I checked the DVD region.
  I reinstalled the driver and also tried with different software.
  What can I do?
  Help, please!

  Hello

  It is possible that your DVD drive incorrect region settings.
  In this case, it is not able to watch all possible movies to DVD from different regions.
  Of course, you can change the settings for 4 times. But after this change, the parameters have been set and it is not possible to change more.

• Satellite A60-302: CD Player read DVDs and CDs but not burned discs

  I have a Toshiba laptop: Satellite A60-302 and I have a problem with the cd player. It can read DVDs and records I buy but it will not read burned discs (even the ones I burned with the portable computers own burner). Only from time to time, he will read a burned disc.
  I tried to clean the eye of laser of cd players, but it did not help.

  Anyone know what could be the problem?

  Hello

  This sounds like the CD burner doesn't burn CD correctly.
  You suggested that you used different types of CD.
  In the user manual, you will find a list of compatible media.
  These media has been tested and it works correctly.

  But if this happens with all CD, so possibly the drive cannot work properly and only a replacement would solve that problem.