DVD/CD burner is not recognized by XP on my Satellite Pro U300

Similar Questions

• Floppy USB drive not recognized when installing WinXP on Satellite Pro L40

  History:

  I bought a Satellite Pro L40, it came with windows vista. I can't stand vista windows for obvious reasons. so I formatted the HARD drive. I have a copy of windows XP.

  IV ' e read on the internet that I need Intel storage driver manager...

  IA´ve got the driver, he got on a floppy, and it does not, because when I start to install XP, it works (after pressing F6 & choose the driver to install). I come to the part of license agreement, press F8 accept...

  I select the partition I want to use (in format completely on vista). It starts to load more stuff... so he said "PLEASE INSERT LABELD - INTEL MATRIX STORAGE MANAGER DRIVER - DISK IN DRIVE A:" "PRESS ENTER WHEN READY."

  The disc that I used in the first place is always in. when I press on enter, nothing NOT to PAST (the USB floppy drive is not yet into action)

  How can I make it work? It is that I can get.

  I DON'T WANT BACK TO VISTA - HELP!

  This could happen if the floppy USB doesn t drive supports the standards of law. Some people have reported on different websites many floppy drives are not recognized.

  However, worry guy. I have a solution ;) (jeaaa: D)

  Try to create a new XP CD using the software called nLite!
  Then, you could include the SATA (Intel Matrix Storage Manager) driver in this new CD and then you could boot from the XP CD again.

  For details and how to use the nLite please Google because there are a lot of useful Web sites.

  Good bye

• How can I fix my CD-ROM drive or a DVD drive that is not recognized by Windows or other programs, so I can't play or access a CD or a DVD.

  How can I fix my CD-ROM drive or a DVD drive that is not recognized by Windows or other programs, so I can't play or access a CD or a DVD. Sometimes, when I click on one of the disks that it opens, but the page for the drive is empty. It also says to insert a disk, sometimes when there is a disc in the drive. How this can be fixed.

  Hi vtdubu,

  ·         Did you do changes on the computer before the show?

  Follow the steps in the article.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://support.Microsoft.com/kb/322756

• My i/o Magic cd burner is not recognized-Fix-It did nothing

  My CD burner is not recognized, not yet listed. He is hanging on, but my PC is not even list.

  Try to unplug the pc, open cabnet to ch, remove the cd. Look at where the connections go, you

  should see a small plastic jumper pin, make sure that its in its frame on the right (master or slave)

  the value to other devices on the IDE connection (usually only 2 devices are able to use the)

  cable)... Also, cable connect usually does not work with this (another rider pin option) the cd

  should have all listed this at the connection point.

• How to reinstall the DVD on Satellite Pro U300-143

  Hello!

  I have a toshiba dvd player uninstall by mistake! How can I install it again? are there options other than the pc recovery?

  I m using the satellite Pro U300-143 with windows vista busines

  Thanks in advance

  Hi Jan

  Please try with the link given by Robin. If this does not work please post again.

• FN + F10/F11/F12 in Satellite Pro U300 does not work

  Guys,

  need your help...
  I have the Satellite Pro U300 series and most recently the numbers four and six obtained busted... its does not work so I try to use the superposition of numeric keypad but I have observed that after pressing FN + F11 nothing happens...

  Please help me...

  Thank you
  <>

  Hello

  When you use FN + F11 small control LED must be lit and the keypad must be enabled.
  If your laptop is preinstalled with Toshiba recovery image this option SHOULD work correctly.

  So nobody here knows what you did with your laptop and why these options are not available more.
  Before you start with advice how to get this working again once please let us know what operating system is preinstalled on your Satellite Pro U400.

• Satellite Pro U300 OS does not recognize PS/2 Port TouchPad

  I have a similar problem.

  My system doesn't recognize that the PS/2 Port TouchPad exists on my Satellite Pro U300. He acknowledges that it no longer works but when I go to Control Panel then mouse it does not appear in the list of devices.

  Help!

  Hello

  I m do not know what problem describe you exactly.
  Do you mean that your notebook computer touchpad no longer works, or did you mean the USB mouse?

  If you mean touchpad, so you should try to reinstall the driver for the touchpad.
  The European driver Toshiba page provides Synaptics touchpad drivers series Pro U300 for Win XP and Vista.
  But generally the operating system should automatically recognize the touchpad and touchpad should work even using the common internal Windows driver.

• Can not install the latest driver from Intel on my Satellite Pro U300-10 display

  Hello

  Intel has recently, a new display driver, which I think is useful to me because it won't let me play games that require:
  Pixel Shader PS1.1
  Vertex Shader VS 1.0
  "Act of war" and others.

  The pilot is the revision of the pilot: 15.12.4.1666, March 5, 2009
  It is supossed to be the latest driver for the video card U300: MOBILE INTEL 965 Express chipset family.

  The problem is that when I try to install, I have an error that says: "not for this system, ask your provider manufacturer.

  How can I install or where I could find the solution?

  I have TOSHIBA Satellite Pro U300-10 with Windows Vista Business 32.
  MOBILE INTEL 965 Express chipset family
  MOBILE INTEL GMA X 3100

  Thank you much in advance.

  DCARL

  Drivers designed for laptops are changed and adapted to provide performance fairly, but not to force a graphics card to run on the limit. As you probably know there are big difference between office and mobile graphics cards.

  Desktop graphics cards have no limits with cooling and drivers can be updated very often. Design of portable computers is completely different and all hardware components are placed on the square. The common problem with laptops is to design the system of cooling, small but effective.
  Because of all these reasons, display drivers must be tested and adapted by the laptop manufacturers. The main point is to protect the material. The same situation is with other manufacturers of graphics card. They don't offer drivers for laptops.

  If your graphics card will blow that will be responsible for this Toshiba or Intel?

  By the way: Satellite Pro U300 is for me a laptop of small business and certainly not designed for games. Do you agree with me?

• Connected to the Portege 3500 USB DVD burner is not recognized correctly

  I am trying to connect a burner DVD HP DVDv 940th my 3500.When Portege I plug in the device, it is not recognized and the Device Manager list as a storage of unknown mass without a driver. Where can I get this driver?

  Hello

  Try to check the assumption of the manufacturer or the download page. Manufacturers of portable gift use support external devices t produced by other companies.

• Can't burn files to DVD, error: "Media is not recognized.

  Original title: cannot burn files to DVD

  I am running Windows XP. I tried to burn different files on discs DVD new (e.g., Imation DVD - RW and RiData DVD + RW). I tried using Easy Media Creator 9, AShampoo Burning Studio ^, a Windows Media Center to burn my DVD discs (especially JPEG photos). In each case, I get the error message that my "media" are not recognized. This player will play music but it not "burn" my photos. Help, please!

  Hello
   
  1. what type of DVD burner do you have? Is this a DVD burner with capacities of reading and writing?
  2. have you ever burned a DVD using this DVD player in the past?
  3. are you able to burn the CD?
  
  Method 1.
  To diagnose and repair problems with your CD or DVD drive when trying to read or burn media automatically.
  Reference:
  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/mats/cd_dvd_drive_problems
  
  Method 2.
  The article below describes how to troubleshoot common problems that may occur when a Windows XP-based computer cannot read a CD or a DVD in a CD or DVD drive. This article contains several methods that you can use to try to solve these problems, and it also includes some advanced troubleshooting steps.
  How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD
  http://support.Microsoft.com/kb/321641/
   
  See also:
  Windows XP CD Burning Secrets
  http://www.Microsoft.com/windowsxp/using/Setup/learnmore/bott_03september16.mspx
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Equium L350D - DVD/CD drive is not recognized

  Hello

  Having a real problem with the internal DVD/CD player in my satellite.

  Any DVD software I try to use my DVD drive is not recognized. I tried to use the following: Toshiba installed, Windows Media Player, iTunes.

  This is the error message:
  The specific drive is not found. Check the setting by going to settings-> actions-> Source settings, or otherwise verify that the disc has been correctly connect to the PC.

  I hope someone can help!

  Optical disc drive is correctly listed in the Device Manager and Windows Explorer?

• Satellite Pro A120: DVD/CD burner does not burn audio and video files

  Hello

  I have the Satellite Pro A120 with a cd/dvd burner MAT * a uj-8415. It works very well with data Brüning, but...

  When you try to burn the MP3 files or video files on DVD or CD/r or any type of audio file, it suddenly gives me an error message telling me that the cd can no longer be used.

  I tried hole Sonic (RecordNow), through Nero 6, and also directly by dragging and dropping files, but all was in vain. This MATI * a uj-8415 machine has also made the same error while burning a DVD double layer.

  Again, the unit reads all types of CD and DVD and writes also all types of files with the exception of the audio and video.

  Can you help me please to solve this problem?

  Hello

  I know that some mp3 files and audio are protected against copying and burning on different CDs or DVDs so could not work? ¦

  Other reasons why you can't write these files to CD or DVD is simply a problem of compatibility between the STRANGE and the CD or DVD.
  According to my experience, not all CD or DVD is supported, and these compatibility issues are not really rare.

  I also have another idea.
  Have you heard of burning of problems caused by the bad registry entry? I mean the upper and lower filters...

  Please check this doc MS:
  http://support.Microsoft.com/kb/270008/en-us

  Completely remove the Upperfilters and Lowerfilters from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  .. .and see if it helps.

• Recently burned CD not recognized by several cd players

  Since I got my Dell computer (several years), I have burned many cd successfully.  The only problem I've had in the past was Windows Media to get the names of the titles of the albums/songs.  I tried to fix it but failed and he gave up. Everything I burned was considered to be an 'unknown '.

  In the last two weeks, I have burned dozens of CDs that will not play on two of my cd players.  All my other cd played on them without problems.  Only one or two things that happened recently during this period.

  1. When you try to play a disc on windows support, that is, 'now playing', he would give me a message "SERVICE NOT AVAILABLE - FAILED DNS server is unable to respond to your request.  Please try again later.  And then he gives me a reference number which changes whenever I get the message.  I always get the desired album to play because they will show up on the playlist and play.

  2. because I've never been able to have the name of the part of the album/songs from my cd, they always rip to 'unknown '.  For this reason, if I was not burning right now, I would be left with selections mesh of different albums torn, making the process of burning a jumble.  So I have always ripped and burned one at a time.  Recently, even if it is apparently back return once again, files ripped in 'Unknown' to a real album CALLED "Unknown" under "U".  This led to several torn albums with the title 'unknown '.

  In any case, I accidentally discovered this problem.  I did most of my listening to the cd burned ON my computer with Windows Media and even the SERVICE UNAVAILABLE message whenever I chose "now playing", I could play without problem.  Then I took some of these new CDs engraved and tried to play on two of my old cd players that have had no problem playing all my other cd burned I received an error message, or more frequently, a message 'no disc', which let assume that perhaps these recent cd does not close properly.  The question is, how can I avoid this does not happen and is it possible that I can somehow 'save' those who are now unplayable by encouraging some kind of close "after the fact".  I thought I had found a way to take one of these CDs and put in back in my computer and causing it to close properly but now I don't know how I did apparently operate.  If she already burned but not closed, how can I position it so that it can close.  Just put it in the computer and eject manually (when these CDs were burned the computer was set to "automatic ejection".

  That's all.  I have a LOT of recently burned cd that WILL play on my computer (even with the weird error message) and on my player connected to my TV, but not dvd will NOT play on one of my two stereo cd players... I receive messages of "no disc".

  Ed (confused)

  Hello Eddill,

  I have also experienced this problem in the past. For me, it had to do with the brand of CD I burned.
  Have you tried using a different brand of CD in to see if the drive is still not detected by some players?
  I would also burn the disc at a slower speed. If you burn at full speed, some older CD players sometimes have trouble reading the discs.

• My cd/dvd drive is still not recognized, have tried to make a sys.restore

  I recently had some problems with my registry and other places after receiving unknown virus problems. Now, I believe that this caused my componet cd/dvd not work or even be recognized. I did several restarts after uninstalling and reinstalling the drive and still is not recognized or displayed in the DEVICE MANAGER. I had several boot SYSTEM RESTORE, but to no avail. My question is, is the cd/dvd drive is no longer functional?

  My question is, is the cd/dvd drive is no longer functional?

  It is possible that the drive does more - if you have another computer, you can test the DVD drive in this computer. Also try the links below.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs:

  http://support.Microsoft.com/kb/982116

  Your CD or DVD drive cannot read or write media - Fix It:
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

• Bay DVD replace HARD drive not recognized by Windows

  I have a 7737 with the 256 GB SSD, but I wanted more storage internally and was not too annoyed to have DVD - so I bought a caddy and replaced the optical drive with a WD Scorpio Black 750 GB drive.

  When I went into administration - computer management - disk management tools, he acknowledged that the drive was there because he told me that he needed reprogramming - so I went ahead and let him. The disc quickly disappeared from the list, and I can't do anything that he can come back.

  I tried to refresh, rescan the drives, restart (how can I confirm the BIOS recognizes the drive correctly, as the "SATA ODD', but Windows still refuses to acknowledge that he is here.) Device Manager displays only the SSD and scanning for hardware changes have no effect.

  Maybe it's a coincidence, but now my laptop seems a touch slow, especially in the graphics... and I noticed that in the Task Manager, System interrupts now takes 10 percent of time CPU on average. I can't say that I've never noticed that before. My old Samsung laptop (which has integrated graphics rather than a dedicated card, to be honest) claims system interrupts doesn't take any time at all CPU. This seems to suggest a conflict any exist, and maybe that's why the drive is not recognized?

  Because Device Manager is not see it, I can't check for updated drivers.

  Because disk management can't see, I can't format / partition / assign a drive letter.

  The BIOS does not let me do anything with the drive, go into properties or disable / re-enable, or something like that.

  Can anyone suggest what I might have missed in the configuration, or what I can do to fix this?

  Thanks in advance.

  Unfortunately, I can't find a downloadable diagnosis for your laptop. Try Seatools. Seagate website has a download, that you can use to create a CD bootable or flash player to test hard drives.

  I just want to see if a tool outside Windows can detect the drive and all the problems.