DVD / cd - rom not find disc dvd

Similar Questions

• Windows 8 DVD ROM not reading discs

  Yesterday I installed a few games on Steam, I was playing Saints Row the third while he was busy installing and bit after that I had to restart my PC because it was originally the trolling game. At the next startup, my laptop then got stuck on the login screen, where I put in my password/PIN and it would just sit there and do nothing. This kept going until that of course I had to go in safe mode and use that 'Everything clear, but keep your files' option windows 8 a, and am now able to log in and access my files.

  Nut, now I am faced with a new problem, my DVD ROM will not read and disk I insert in there. It was working fine until I deleted everything, and now I can't use it.

  I tried to use the tool of diagnosis provided by Microsoft for this problem, but it does not work. I should also mention the possibility of editing the registry does not work either.

  My laptop is reasonably elderly, ten months or so, but I doubt that it is only a hardware problem because the DVD ROM shows on my computer and device manager says it works very well.

  Are there other solutions for this or should I just take it back to the shop?

  Hi Taonga,

  Thanks for posting the query on Microsoft Community.

  I'm sorry to know that the DVD ROM is not working now. I appreciate your efforts toward this problem. It could be a software or a hardware problem.

  1. What is the brand and model of your computer?
  2. What diagnostic tool do you run?
  3. Did you try it with any other DVD?

  You can try all the steps in the below link, it may be helpful when fixing the issue.

  Run this fixit: http://support2.microsoft.com/mats/cd_dvd_drive_problems/en-us

  If the problem is not resolved, then follow the link below.

  Your CD-ROM or DVD drive is not recognized by Windows or other programs:

  http://support.Microsoft.com/kb/314060/en-us

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756

  I hope this helps to solve the issue. If the problem persists, contact us. We will be happy to help you.

• CD Rom and DVD Rom not reading discs

  Hello

  My CD/DVD-rom is not reading any music cd or a DVD movie that I insert in the drive. I looked in the currency manager and the samsung cdrw/dvdsm-352F material displays a yellow exclamation point. It gives me a code 41. He says that the hardware is installed, but cannot read the device.  Can you please let me know how I can fix this.  Thank you!

  
  

• Accidentally deleted CS6 Fireworks, can not find disc.

  Have looked everywhere. But need the activation code. Where can I download it. Thanks for the help in advance.

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
  • Captivate: 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• CD-ROM/DVD-rom drives will not play discs?... tried to be updated no joy... I tried the uninstall then re install just says code 39 error?. any suggestions?

  CD-ROM/DVD-rom drives will not play discs?... tried to be updated no joy... I tried the uninstall then re install just says code 39 error?. any suggestions?

  Try following the steps under "Windows XP" in the article following the MS KB:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• CD/DVD-ROM not recognized since the installation of Vista, without errors

  Installed Vista and lost CD rom? CD works can be heard during the execution but system will not find CDROM? Deleted upper and filters low but still will not find CD ROM?

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Satellite A660 - do not find external DVD drive

  Hey guys. Newbie displaying in total despair of and needing help! I posted in other forums without success. I bought a Samsung SH-D162D DVD drive in a USB enclosure to connect to my Satellite A660 via USB.

  I can't get Windows 7 to find! When I plug in the USB cable, the ball comes up to say that it has been installed (sometimes), I can see it on for about 1 or 2 minutes then he falls. It is not listed in my hardware or anything. Its not found in disk management or my devices, so it is not a case to change the drive letter - I can't find the drive to change. I also tried to find upper and lower settings in regedit. Could not find them so couldn't remove them as suggested in other posts of this nature.

  It is set to master, the IDE connector and power connectors are very good. Its got to be a cause of problem of Windows 7 it comes very briefly. In the minute or 2 sound, I can't do anything with it. It crashes right although it will open and close. I've google it and can't find anything. Mainly of registry issues, but they did not help.

  Ive also connected to another laptop with XP and had no problems so I know the DVD Rom works very well and all the cables are ok. Ive tried all 4 USB ports on my laptop and also disabled all the parameters of energy. All with no luck. And I also all Windows 7 update.

  This is exactly what happens to the power out of the Cabinet.

  1. I connect the USB cord then turn on the enclosure.
  2 - I quickly click Start, and I can see the DVD Rom E player beside my computer laptop dvd rom.
  3 - the green bar above starts to fill to the top, from left to right and gets to half way then suddenly disappears icon of DVD Rom and makes the green bar.
  4. He then flashes up in computers laptops DVD Rom icon with a player of Local E drive, but only for a fraction of a second.
  5. sometimes a balloon comes up saying peripheral installation, then the installed device successfully... but not every time.

  And that's all. I'm at a total loss and the cant work, so any help is really appreciated!

  Hi Smee,

  So if you have already connected the external hard drive on another computer, and it worked correctly, it seems to be a driver or compatibility between your external DVD drive problem and and your Satellite A660

  It will be connected to the port USB then you tried to remove all the USB ports on the Device Manager? After that, you must restart your computer and the USB ports will be recognized automatically from the Device Manager. In addition, I would also try updating the chipset driver. New version, which you can download on the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Have you also tested other devices on your A660 if they work properly?

• Can not find the program to burn DVD

  I used to burn and copy DVD, XP operating system. Now I can not find the program to do.
  Hope that I explain ok

  Thank you
  not mind too much techno

  Hey,.

  What program do you mean exactly?
  Nero or what else?

  For burning and copying of discs, I can recommend that the freeware CD Burner XP tools. It of really small and fast tool, never had any problems with it.

  Check this box!

• DVD player showing an error of not finding the application

  When you try to play a DVD, the YEAR error message as not finding the application. Please respond to the problem.

  Hi Nibrasnajeeb,

  ·         What is the default Media Application that you use on the computer?

  ·         What happens when you try to open the disks in Windows Media Player?

  Run the troubleshooting below links and check if it helps:

  1:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-and-burning-CDs-DVDs-and-BluRay-discs-Troubleshooter

  2:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-DVD-Troubleshooter

• DVD ROM not reading CD

  Hello world

  System manufacturer: DELL Inc..

  System model: Vostro 1015

  OS: Windows 7 64-bit

  I'm having a problem with dvd - ROM does not detect not the disc?

  The player turns upward discs at all?  If so, see the next step.  If not, the drive is toast - replace it with a new one.

  If the disc is spinning, but it will not read the system, start safe mode (press F8 repeatedly until WIndows starts loading).  See that if the system will read the disc in safe mode - if it is, you have a driver problem.  If you have any CD/DVD software installed in read/write, uninstall, reboot and reinstall.

  If the drive will not read a disc even in safe mode, it's the toast - replace the drive.

• Tecra M4 - DVD player does not recognize discs in Vista

  Hello

  After the installation of Vista my dvd player does not recognize discs!
  No update XP! It was a clean install of Vista.

  I found several links on the upper filter and lower registry entries this entry does not exist in my registry under the CDROM class.

  I tried the XP disk it works fine and recognizes all.
  Drivers are installed correctly no problem in Device Manager is invited.

  So I have no idea how to run it, seems to be a Vista problem

  Could someone help me? I am really frustrated to this topic

  Thanks for your help

  Maybe this helps:

  -Remove the drive from Device Manager CD/DVD.
  -Then access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  -Reboot the laptop

  But what happens exactly? Which disks are not recognized?

• Satellite L855D can not find my CD/DVD drive

  Hello!

  I don't know what happened to my computer, but it finds no more CD/DVD drive.
  I guess I could have removed some necessary player, but not the goal anyway.

  Is it possible to get it back?
  I tried RmvFltrs which I found on some Toshiba Google search tech support site, but it did not help.
  He said it worked but my computer tells me that the installation could not be performed.

  I'm not in a desperate need of training for work, I wonder if it is possible to make it work somehow. So if someone could help me with this, I'd be more than happy.

  Sincerely,

  Joonas

  Hello

  What exactly do you mean by my computer, but it does not find the CD/DVD drive more. ?

  It is recognized in Device Manager?
  The CD/DVD driver is part of the system. It cannot be installed manually.

• Cannot use disk, error: Disc Copier could not find a CD-ROM drive supported. You will not be able to make copies of the disc to another.

  Original title: follow question Winsows XP repair

  I get following messages is displayed when I try to use disk functions.  #1 API can not see all CD ROMS in the system, please check to see if they are properly plugged...

  #2 disc copy could not find a CD-ROM drive supported.  You will not be able to make copies of the disc to another.

  Should I take the modem to a computer repair shop to get this repaired?

  Hello

  I suggest to refer to the procedure described in the following article and check the status of the issue.

  Error messages occur when you run Easy CD Creator in Windows XP.

  http://support.Microsoft.com/kb/285910

• DVD player, install the game, but can not find the CD to play

  This happened recently with all my games. My DVD Player recognizes that theres a CD/DVD in the drive and install without problem, but when I go to run the game after the installation, it asks me to insert the CD/DVD in the drive, or can not find the CD. any suggestions? already I've updated my DVD player, it's out of the question. only, he began doing this a few days ago

  Hi Ubergringo,

  1. What is the brand and model of the CD/DVD device?
  2. what game you are trying to install and play?
  3. are you able to view the contents of the CD/DVD using Windows Explorer?

  Please provide us with more details on the issue, so that we can better help you.

  If the problem is with the games Microsoft, then try the steps mentioned in this article.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• DRAC 5 installation media: "Selection of CD/DVD-ROM not valid."

  I connect to a Drac 5 with firmware version 1.33 using 32 bit Firefox 2.0.0.20 as downloaded from Mozilla.org running on CentOS 5.2.

  It seems to me installing the Console and media attach the plug-ins OK, but I get a problem when I try to join a DVD-ROM. I select the ISO from Centos 5.2 image, but when I press the Connect button I get a pop-up indicating that "the page at https://192.168.108.102 says: ' then 'selection of CD/DVD-ROM not valid.'.

  If I try the same thing using IE 7 under Windows, it will connect, but since I don't have Windows in the data center is too slow and no use for me to try to connect a DVD over the WAN.

  I searched Google and found nothing documenting this error so I am a bit stuck as to what it means and what to do about it.

  I tried to run firefox as root also in case the plugin was trying to cordon the ISO file.

  I also eliminated any firewall blocking the ports.

  This problem is related to Internet Explorer 8.
  The error can be resolved by adding the IP address as a trusted site in Internet Explorer 8.