DVD drive trying to eject a nonexistent DVD

Similar Questions

• SONY TV TAV - L1 AND WHEN I TRIED TO EJECT THE DVD SCREEN LOCKED. NOW I'M STUCK FOR THE SAME MOVIE. W

  I HAVE A TV SONY TAV - L1 AND WHEN I TRIED TO EJECT DVD YESTERDAY IT SHOWS LOCKED AND IT WILL NOT EJECT. NOW I'M STUCK FOR THE SAME MOVIE. WHAT CAN I DO? IT IS NOT IN LOCK FOR CHILDREN MODE

  Hello Dimitra,

  I apologize for the inconvenience, it seems that the drawer has been locked inadvertently.  Please perform the following steps to unlock.

  1. press the power button to turn the monitor of the device.

  2 tap the input selection button to select "DVD".

  3. press and hold simultaneously the button stop and eject until 'UNLOCKED' appears on the front panel.

• Im trying to burn a CD, but my drive does not eject if I put a CD

  I am trying to burn a CD and my drive will not eject if I can put a CD to start to burn my music

  Hello

  For the readers of the status bar:

  Sometimes they get stuck. There is a small hole on the front of the CD drive that you can stick a
  a paper clip that will release him and the reader to open.

  Create a trombone in car Opener
  http://pcsupport.about.com/od/tipstricks/HT/ppdropen.htm

  Open a CD/DVD player with a paper clip.
  http://www.josepino.com/?open_cd-dvd_paperclip

  =================================

  For the readers of the slot:

  Check with the manufacturer of system on how do to eject the disc.

  Dell xps m1330 dvd drive will not eject cd inside<-- check="" these="">
  http://www.FixYa.com/support/t2643828-dell_xps_m1330_dvd_drive_will_not_eject

  Be careful as you may damage the player using the method below:
  
  You may need to get the driver to work 1 However, this could still work.
  http://www.tech-tweak.NET/2009/11/how-to-eject-STUK-DVD-from-slot-load.html

  The method used on the Mac could work
  http://www.YouTube.com/watch?v=wpWieIoBBrk

  How to disassemble the laptop (Dell XPS M1330)<--- voids="" any="" warranty!="" this="" is="" an="">
  http://ahwee.com/how-to-disassemble-laptop-Dell-XPS-M1330

  Also have heard double tape on a credit card or play can work.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• DVD drive will not eject a disc: Lenovo 3000 desktop

  The DVD - RW that I use as a backup disk became full, so I erased it. Unfortunately now I am unable to eject the disc. Desktop Lenovo do not have a small hole where you can insert a paperclip to open manually draw lots. Any ideas?

  Yes, I solved the problem. To eject a disc (or open the status bar), the only way is to turn off and restart the computer. Fortunately this problem occurs only rarely.

• I am trying to reinstall a copy of cd bought cs5, but my cd drive allows to eject the disc.

  Is it possible to download a copy of my CD around the disk drive?  Where should I send the product codes and other identification numbers?

  You can download the trial version of the software from the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important article Instructions on the pages to download to this site or the download may not work properly.

  CS5: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

• I'm trying to re - install my edition teaching cs5, but the drive just keeps ejecting. Help!

  Please tell us which OS version are you using? You can try to download CS5.5 products from here and try to install it.

• Error - Please insert a disc into the drive trying to open & H R Block at home software CD.

  Original title: XP will not launch my H & R Block at home software CD.

  I bought the & H R Block at home tax software to target and Windows XP will not launch the CD in a CD/DVD players.  I tried manually running the software, but whenever I get the response "Please insert a disk in the drive", even if the disk is in the drive.  I tried other CD and they work all including the H & R Block CD provided in the mail.  Any suggestions for ways I can manually launch the CD ROM?  I returned to the store and exchanged, and the second CD did the same thing.

  Hi AALLIS,

  You did it all change hardware or software on your machine before this problem?

  You can follow this link & check if it helps.

  How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD

  Hope the helps of information.

  Please post back and we do know.

• Impossible to mount the persistent drive - trying to deploy the first pool of offices and do not. -View composer agent initialization failed

  Hi all

  Complete errors:

  Discover the State of the agent (22) composer initialization error: cannot mount the persistent drive. Please check the VM parent if an existing drive uses the same drive letter. (expected 0 seconds)

  State matching: matching...

  By:xxx.xxx.xxx.local set up

  Attempted theft by:

  Error commissioning took place for Machine xxx: View Composer agent initialization failed

  I am currently deployment of VMWare view for the first time in a test environment and have hit a problem I have not been able to get around despite several searches on google and trial and error.

  Hoping that someone here could suggest something.

  View the VMWare versions are all 6.0.1.

  vCenter is on a device.

  VMWare view connection manager is on a 2012 R2 VM server.

  VMWare view dial is on a separate server 2012 R2 VM.

  I have a 2012 SQL on a separate server 2012 R2 VM Server installation.

  SQL databases have been set up for the composer to be able to reach it, it uses ODBC 64-bit via SQL Server Native Client 11.0.

  I tried troubleshooting by exchanging 32-bit, but this is not connected, it seems so 64 bit is correct.

  I have a windows 7 64-bit Enterprise Edition VM under my Golden image. There are VMWare tools on it and the VMWare agent on it.

  The virtual ipconfig/release performed top machine, he was then stop and a snapshot taken as my source.

  The problem is that when I go to deploy a pool of offices, I get the above error.

  If I connect to the VM created via vCenter readers persistent and temporary show very well.

  Based on the error, I tried different settings such as change the path for the reader of DVD VMs of D: to Z:, spread unique persistence and the temporary disks on multiple data-stores or data stores and even remove the drive of DVD of VMs completely. I have also looked at newspapers under composer view but find nothing to explain the behavior.

  SQL Server seems to work for configuration through the error logs and virtual machines are created and added to AD as expected.

  I must point out that the virtual machines are as linked clones.

  Can anyone offer a clue as to the cause or something, I can check it please, did everything I can think and Googling the error does not come to the top with something useful so far.

  Thank you

  IF you use an Agent 6.0.2 Please downgrade 6.0.1 agent and let me know the results

• Hard drives, Interface regularly ejected

  Hi people,

  Since the update to the latest El Capitan (10.11.6), all my external drives and the interface is constantly ejected.  want to go back to the previous version, but the ejected disc always has this version.  Options?

  BOE

  Try disabling put hard drives to sleep even when in energy saver preferences.

  In addition, check with the manufacturer of drive for an update to fix the problem.

• External hard drive will not eject

  As I encrypted my external hard drive, it does not stop running after I press eject. He disappears from the sidebar in the Finder, but it does not stop running. I deleted and connected it several times and the same thing happens every time. It can be dangerous to drive or is it OK to remove it even if it is still ongoing? Is there anyway to solve this problem so that he stops running when the ejection? Or is there an another way to delete if eject does not work? I have a MacBook Pro with OS X 10.9.5.

  One that you eject the disc and it disappears from the Finder, it's OK to disconnect/manually turn off the external drive.

• CD-ROM drive does not eject on Tecra 8100

  I have a Toshiba Tecra 8100 and my CD player will not eject. It only happens when it starts.
  Any ideas, everyone, how can I solve this problem?

  Even when I get it open habit run all disks?

  Hello

  You are not able to open the drive to be on the CD. Is this good?
  Generally, each player has a small hole to open the player manually. You can use a thin wire to open the player.
  But if the reader doesn t work correctly or t doesn't accept and recognize any CD so I guess the drive is dead and only replace the drive can solve it.

• disk drive will not eject disc

  I have a Toshiba laptop and somehow I messed up the network feature so I tried to reinstall Windows 7 from the disc, I received. I put in the disk drive and unfortunately was not pushing it down on the spindle well enough.  When I opened the drive, the drive is not found.  How can I get the disc?  It does not vibrate or anything like that.  I can't see inside the car even with a flashlight.  Where is he?

  If it is under warranty let Toshiba.  Can push the tray and turn upside down maybe lappy she would fall into the lace.

• Have a computer dell laptop. replaced the hard drive; tried to install my Windows XP and my product key is not accepted. I was wondering why and how do to accomplish this task.

  My dell laptop had the hard drive replaced.  My son, who knows computers, installed the new hard drive.  Then he tried to install my Windows XP Professional software - when it came time to put the product key #, it was not accepted.  It's authentic.  The product key is: * removed *.

  There no mention of this issue in section outages or other information provided in the booklet provided.  Can you help me with this problem?

  The license key and product type must match (XP Home vs XP Pro;)  (and OEM license vs the retail license).  If it's a Dell computer and you get the product key from a sticker on the case, then there is likely a version of Windows XP OEM this product key.  If you install Windows XP from a retail installation disk, then the types of licenses will not match.  You will need to use the license that accompanies the retail installation disc or you will need to contact Dell for an OEM installation disc to go with the license on your sticker case.

  HTH,
  JW

• When trying to eject a device on the desktop running Windows 7, I do not receive the "Safe to Remove Hardware" message

  Just installed Windows 7 on my desktop & laptop computer. On my desk the Safely Remove Hardware icon appears when I plug in my USB drive or an additional hard drive. However when I click the icon and select eject device I don't get a message telling me that it is "safe to remove". The device does not appear in my computer after that I selected for the ejection. With my laptop, I get the safe to delete message.

  Hello

  Try this;

  1) click Start

  (2) type racing

  (3) copy and Paste editing C:\WINDOWS\system32\rundll32.exe shell32.dll, Control_RunDLL hotplug.dll

  racetrack

  (4) pressing the Enter key should bring the safely remove hardware dialog box.

  $C

  God will not look you over for medals, but for scars. Each winner has scars; I do this either on the same heart

• Win 7 IDE SATA drives indicated as ejection

  Hi - I have a Gigabyte H61M mobo with CPU Intel Core I5-2400 and two hard drives from Western Digital WD5000AZRX-00A8LB0.

  Boredom is that readers will always appear in the tool ' safely remove hardware and eject Media.  Several messages say it's normal for the AHCI SATA disks, but mine seem to be IDE SATA: in Device Manager > properties > details > hardware ID they list as:

  • IDE\DiskWDC_WD5000AZRX - 00A8LB0___01.01 A 01
  • IDE\WDC_WD5000AZRX - 00A8LB0___01.01 A 01
  • IDE\DiskWDC_WD5000AZRX-00A8LB0___
  • WDC_WD5000AZRX - 00A8LB0___01.01 A 01
  • GenDisk

  This post gives a registry hack to deal with drives as internal ports, but at the moment I'm confused - are all SATA drives that are considered "ejection"?

  Gordon.

  I have a second computer that shows that also removable SATA drives and Yes, it would be quite easy to accidentally delete the wrong drive. That said, installation of 'remove' will not be released a disc which he sees as "in use", so it is more difficult to make the error that inclusion in the list 'remove' may suggest it...