DVD - rom are unable to detect the DVD/CD

Similar Questions

• front usb ports are unable to detect the large capacity external hard drive (250 GB)

  Hello
  I have 250 GB external hard drive, whenever I connect to my front usb ports it detected, but pen drives, are to detect flash drives, one of my friends said that you need to update my bios & I here is the motherboard.

  motherboard: Mercury 945gcm

  It is possible that the USB 1.1 and not 2.0 ports that can explain the problem.  In addition, sometimes USB ports out enough power to run an external device that is not powered separatelly.  I don't know if updating the BIOS will help, but if there is an update available for your system (and it MUST be for your system - big bad can occur if you install the wrong BIOS so get with the computer manufacturer, and speak to a representative to confirm that they are appropriate for your system AND your version of Vista) then by all means install it and see if that solves the problem.  You can also get the updated drivers for the motherboard manufacturer, at the same time and see if that helps as well.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• HP PhotoSmart C4450 All in One Printer is unable to detect the alignment (tried everything) page

  My question is very simple. I tried all the options I could think for my printer detect the alignment page and it is still unable to detect the page. Can someone who has had the same problem please send me a list of recommended procedures to solve the problem? I intend to go through one by one until it is resolved. The post that I found with this exact topic didn't have a sufficient response that other that the user placed a bunch of papers on the page alignment and the printer worked... Could really use some help, my patience is pretty much exhausted. I use a MAC Leopard operating system. Thank you.

  Hi drubio1989,

  What are the levels of ink in each cartridge?  I connected a troubleshooting document that addresses the lack of alignment.  Click here  You could take a look and perform one of the steps that you did not.  Let me know how it goes.

  Good luck!

• Oracle Forms Win 7 64 - bit error INST-07407: unable to detect the platform of the machine or pieces of JVM

  
  I'll try to install Oracle Forms 11.1.2.0 on Win 7 64 bit and get INST-07407: unable to detect the platform of the machine or the pieces of the JVM.

  I followed the steps described in Oracle Forms 11.1.2.0 on Win 7 64 - bit bit JVM error but still unable to solve my problem.

  Here are the details of the version of the installed JDK.

  C:\Program Files\Java\jdk1.6.0_45 > java-version

  Java version "1.6.0_45".

  Java (TM) SE Runtime Environment (build 1.6.0_45 - b06)

  Java for 64-bit Server VM (build 20.45 - b01, mixed mode)

  C:\Program Files\Java\jdk1.6.0_45 > % java_home Echo%
  C:\Program Files\Java\jdk1.6.0_45

  C:\Program Files\Java\jdk1.6.0_45 > echo %path%
  C:\Windows\System32; C:\Windows; C:\Windows\System32\Wbem; C:\Windows; C:\Program Fi
  les\Java\jdk1.6.0_45\bin

  Installer: -.

  1 jdk-6u45-windows - x 64

  2 wls1036_generic.jar for 64-bit platform

  3 ofm_frmrpts_win_11.1.2.0.0_64_disk1_1of1

  Please advise. Thank you.

  I don't know if help.

  I have installed Oracle Forms 11 g on Windows Vista Home Edition (64-bit), had been an experience horrible (much testing), although eventually I got.

  If I'm not mistaken, I used this guide:

  Oracle WebLogic & Forms 11g Release 2 installation guide

• How can I fix the icons who are unable to move the bar to the add-on?

  How can I fix the icons who are unable to move the bar to the add-on?

  It didn't help me, but it was a good try. I found an extension called U I 1.4.4 Fixer who did most of what I was looking for. Thanks for answering my question so quickly Cor - el.

• Calendar view-only and users are unable to change the time.

  We use Windows Server 2003 R2 active directory and group policy.

  Group Policy, we blocked sytem time change but after this timetable can also test block user cannt read calander also

  pls sugget me to resolve this issure

  Calendar view-only and users are unable to change the time.

  Hi sunil77,

  Your question about changes in UAC using Group Policy on Windows Server 2003, it will be better answered by the experts in the Group Policy Forum. Please repost your question to the address provided.

• Kodak esp5250 printer 3520 error code unable to detect the edges of paper

  error code Kodak esp5250 printer 3520 unable to detect the edge of the paper?

  Please see

  http://support.en.kodak.co.uk/app/answers/detail/a_id/25352/kw/3520/selected/true .

• We have a Nextbook but are unable to access the Internet at home

  We have a Nextbook but are unable to access the Internet at home, even if we have a laptop and PC. How to solve this problem? Thank you.

  Hi Vernon,

  1. you are trying to connect the Nextbook to wireless (Wi - fi) network in your home?

  It is a tablet based on Google's Android. As it comes to one product other than Microsoft, I suggest that get you in touch with the manufacturer about this issue. You can contact them at the following link:

  http://www.nextbookusa.com/techsupport.php

  Hope this information is useful.

• During installing After Effects CS6, after the number of input series - report «we are unable to validate the serial number for Adobe After Effects CS6.» Please contact the support. »

  During installing After Effects CS6, after the number of input series - report «we are unable to validate the serial number for Adobe After Effects CS6.» Please contact the support. »

  What are the blocker of Adobe which affects the serial number validation processes.

  Follow the procedure below:

  • Remove all entries that has name of adobe. Then close the Textedit, it will Autosave.
  • Make sure that there is no entry of Adobe on the inside.
  • Then copy and paste the Hosts file in folder etc.
  • We replace the modified hosts file that we had copied on the desktop with the original Hosts file inside the folder etc.
  • When you are prompted, the authentication by password Mac,
  • Be sure to select the option Replace ...
  • Once you have replaced the Hosts file, double click on it again and check if the Hosts file is free of Adobe entries.

  Then try to activate the CS 6 apps using the serial number, it shud work.

  Let me know if you face any problem.

• Why it says "we are unable to verify the serial number.

  Hello

  My laptop is MacPro.

  When I type the serial number, it says that we are unable to verify the serial number with the CS6 and Design and Web. What is wrong with him?

  And I really need your help, please!

  I await your response. Thank you very much!!

  HI hanyangzi,

  Please rename the hosts file. Hosts.old hosts and try to activate Adobe applications.

  Kind regards

  Ashish

• Linksys wireless-g usb network adapter unable to detect the router using windows XP desktop PC

  I've changed in broadband Orange yesterday and since then my adapter is unable to find the network (it was working fine with TalkTalk until I changed).

  He managed to find a couple of other networks that are nearby but nothing else.

  I have a laptop (windows 7) who finds the router Orange immediately. I tested the adapter with the laptop and it finds the router Orange plus about 10 other nearby networks.

  I rang Orange who crossed their tests and not found any problems. I uninstalled and reinstalled the adapter on the windows XP desktop, but I get the same result.

  Can anyone help?

  Thank you

  Thanks for the reply.

  I got it finally work last night after a day of cleaning up!

  Even if the network does not have to be detected in the available wireless networks "choose" I tried the "New Connection Wizard" and entered all the details that came with the router. The adapter found the Orange router but nothing else in the region.

  For now, it works but there is a problem somewhere, because I don't see any networks, I can see on my laptop.

  See you soon.

• My system is unable to detect the hard drive.

  Original title: HDD not detectable

  Well, I l turned off my computer laptop and then heard some bad news, then I hit on the left side of it, angry and then he had a problem so I checked the BIOS and discovered that the disc HARD was undetectable and so now my laptop no longer starts. Here is a picture of what is shown on the screen

  Hi Robert,.

  Please contact Microsoft Community.

  I'm sorry to know that you are unable to boot your system as the hard drive is undetectable. I suggest you contact the manufacturer of your Dell system for additional help on this problem. As they should perhaps update your BIOS or make some changes in the settings.

  Reference: http://www.Dell.com/support/contents/us/en/19/category/contact-information/technical-support?c=us&l=en&s=DHS&CS=19

  Hope this information helps. Please do not hesitate to contact us if you are having trouble using your Windows.

  Thank you.

• Stupid MS is unable to detect the operating system of W2KPSP4 but sees IE6SP1 user agent

  It is ridiculous that Microsoft (coding of Web Pages webmaster) is unable to detect that a user entering the page has a (drop dead) of Windows 2000 Professional SP4 operating system (OS)...

  and then always recommend (MS) install IE 8... When as far as I know... an IE8 installation cannot complete successfully on the OS W2KPSP4?

  Hello

  The Microsoft Answers community focuses on the context of use. Please reach out to the business community of COMPUTING in the TechNet forum below:

  http://social.technet.Microsoft.com/forums/en-us/categories

• "Unable to detect the Service" - bluetooth mouse connects is no longer

  Recently reformatted my c: drive, have a Sony Vaio running windows xp and it has upgraded to SP3.  Tested connection Sonyerisson Xperia Sony headphones via bluetooth and the two connect very well.  Have uninstalled and reinstalled Toshiba Bluetooth stack and nothing.  He sees the mouse but gives the error "failed to detect the service."  Also see "Bluetooth Local COM" in the Panel does not register the blue tooth services, more they are not in the registry.  I had been using the mouse before reformat, so not sure what happened.

  Hello KMXperia,

  Thank you for your message.  Please click HERE for some troubleshooting process.  After running these steps, please let us know how you feel.  We can't wait to hear back on your part.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• WRT110 Wireless - unable to detect the signal/connection.

  Recently lost connectivity to an existing wireless connection I had set up over the past months.  The two XP laptop with Dell Wireless WLAN Card and box of Wii is no longer connect or detect the signal.  Curiously, WiFi stood momentarily after the reset of power on the router but then disappeared. I connect well with connection wired and mobile detects all my neighbors SSID.  All the lights on the router are bed... but no wireless signal.  I even joined a wireless USB device to my desktop pc to test.  It detected all the SSID of the neighbors but not mine.  Even with the laptop.

  Troubleshooting steps I did:

  -Router-

  Power recycled.

  Held reset button.

  Linksys firmware to 1.0.5 update

  Configuration is modified to enable the SSID Broadcast

  -Laptop-

  Card driver WLAN Dell upgrade vA17 4.170.5 to 4.170.77.18 vA22

  People with disabilities Dell Wireless utility and enabled Windows Wireless configuration.  Either the Dell or Windows detected my wireless signal wireless utility.  Both will detect AND connect to the open connection of the neighbor.

  Appreciate any idea or other troubleshooting suggestions.

  Readjust the settings of your router wireless...

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER... Let the empty user name & password use admin lowercase...

  For wireless settings, follow these steps: -.
  Click on the Wireless tab
  -Here, select manual configuration... Wireless network mode must be mixed...
  -Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors...
  -Set the Standard - 20 MHz Radio band and change the Standard channel to 11-2, 462 GHz... Wireless SSID broadcast should be enabled and then click on save settings...
  Please take note of the name of the wireless network (SSID) because it's the network identifier...

  For wireless security: -.
  Click the sub-tab under wireless > Wireless Security...
  Change the mode of WEP wireless security, encryption must be 64-bit. Let the empty password, do not type in anything... Under type of WEP Key 1 in all 10 numbers please (numbers only and no mailbox for example: your 10-digit phone number) and click on save settings... Please note the 1 WEP key as it comes to the security key for the wireless network...

  Click the settings advanced wireless
  Change the interval of tag to 75 > change the Fragmentation threshold to 2304, change the RTS threshold to 2304 > click 'save settings '...
  Now let's see if you can locate your wireless network and try to connect...