DVD - ROM not showing is not on compmuter

Similar Questions

• DRAC 5 installation media: "Selection of CD/DVD-ROM not valid."

  I connect to a Drac 5 with firmware version 1.33 using 32 bit Firefox 2.0.0.20 as downloaded from Mozilla.org running on CentOS 5.2.

  It seems to me installing the Console and media attach the plug-ins OK, but I get a problem when I try to join a DVD-ROM. I select the ISO from Centos 5.2 image, but when I press the Connect button I get a pop-up indicating that "the page at https://192.168.108.102 says: ' then 'selection of CD/DVD-ROM not valid.'.

  If I try the same thing using IE 7 under Windows, it will connect, but since I don't have Windows in the data center is too slow and no use for me to try to connect a DVD over the WAN.

  I searched Google and found nothing documenting this error so I am a bit stuck as to what it means and what to do about it.

  I tried to run firefox as root also in case the plugin was trying to cordon the ISO file.

  I also eliminated any firewall blocking the ports.

  This problem is related to Internet Explorer 8.
  The error can be resolved by adding the IP address as a trusted site in Internet Explorer 8.

• DVD-ROM not able to read any Dvd or cd...

  Hi, my dvd rom is not able to read any disc, I can see the drive in my computer, when I insert a disc, it runs for the first time, the light shows and thn it stops completely, and when I click on the dvd icon in my computers it drive ejects, when I tried to google my problem I got to know tht, this may be due the updates for vista and the solution was to remove the upper filter or lower in the registry, I tried tht so but thn too the problem persists, try wht should I do?

  try to use the DVD rom in another IDE or SCSI port in your computer.

• Windows 8 DVD ROM not reading discs

  Yesterday I installed a few games on Steam, I was playing Saints Row the third while he was busy installing and bit after that I had to restart my PC because it was originally the trolling game. At the next startup, my laptop then got stuck on the login screen, where I put in my password/PIN and it would just sit there and do nothing. This kept going until that of course I had to go in safe mode and use that 'Everything clear, but keep your files' option windows 8 a, and am now able to log in and access my files.

  Nut, now I am faced with a new problem, my DVD ROM will not read and disk I insert in there. It was working fine until I deleted everything, and now I can't use it.

  I tried to use the tool of diagnosis provided by Microsoft for this problem, but it does not work. I should also mention the possibility of editing the registry does not work either.

  My laptop is reasonably elderly, ten months or so, but I doubt that it is only a hardware problem because the DVD ROM shows on my computer and device manager says it works very well.

  Are there other solutions for this or should I just take it back to the shop?

  Hi Taonga,

  Thanks for posting the query on Microsoft Community.

  I'm sorry to know that the DVD ROM is not working now. I appreciate your efforts toward this problem. It could be a software or a hardware problem.

  1. What is the brand and model of your computer?
  2. What diagnostic tool do you run?
  3. Did you try it with any other DVD?

  You can try all the steps in the below link, it may be helpful when fixing the issue.

  Run this fixit: http://support2.microsoft.com/mats/cd_dvd_drive_problems/en-us

  If the problem is not resolved, then follow the link below.

  Your CD-ROM or DVD drive is not recognized by Windows or other programs:

  http://support.Microsoft.com/kb/314060/en-us

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756

  I hope this helps to solve the issue. If the problem persists, contact us. We will be happy to help you.

• CD/DVD-ROM NOT DETECTED

  I bought a laptop (HP 2000-2d28tu) 6 months back. Unfortunately since last sound CD/DVD-ROM does not appear in any of the installed OSs, Win 7, Win 8 and Ubuntu i.e. also not in the BIOS settings. Please suggest proper advice?

  I would say that this need to be replaced. It seems it would be under warranty if it's only 6 mos old. If this is not the case, the part is not too expensive and it's pretty easy to replace. After the return if you ned more of help.

• Tecra S1: DVD ROM not recognized burner (Plextor PX-608AL)

  Hi all

  I bought a DVD ROM Writer (Plextor PX-608AL) that is not recognized by my Tecra S1 with XP Pro.

  I installed the latest BIOS v2.50 as well as the latest Windows patches.

  To the search, in the Setup of the BIOS (ESC during startup), the drive is not available.

  I tested the drive in my old non - Toshiba with Win2k laptop with no problems.

  Mounting frame is also OK (tested with the original Toshiba DVD ROM)

  Y at - there a trick to getting a 3rd disc part DVD working in a Tecra notebook?
  What is generally a problem

  Thanks for reading my ad and you answers or advice

  Klaus

  Hello

  It won't be very easy get your new work of drive on your S1, I will explain why:

  Most DVD players for laptops (including your Plextor 608AL) do not have jumpers to set
  their place according to the requirements of the laptop.
  Three settings are available: master/slave/CableSelect

  Most Toshiba laptops require the CD to react as a secondary master drive, unfortunately
  a disc factory settings in bulk comes as a disk Primary Master or CS.

  There are two options how to get to missing jumpers to make it work.
  (1) thanks to a new firmware patch that has this option defined by the software based on Toshiba standard or
  (2) by a bridge of material on some pins to the back of the drive.

  As you can see, both options will cancel the guarantee of the reader and are not easy for a techie/technician.

  As for option 1) on the search for a suitable firmware... no there are none available now. I checked the official site of Plextor, but also sites of patch firmware... NO CONCLUSION.
  According to another Forum, business Plextor responded to a request for a firmware adapted with this answer:

  start of quote:
  Dear Sir.

  The drive is detected beeing as a master drive.
  This setting cannot be changed. Are there no rider to do so.
  How mount you the device to your laptop, it's up to you.
  It of different for every laptop and either found in the manual of books or you can request that information from the manufacturers for your laptop.

  Kind regards
  end quote (source: http://club.cdfreaks.com/showthread.php?t=199145 )

  As in option 2), it requires some skills with soldering and I do not think that this forum is suitable for me to explain this procedure. You should google around to find the procedure "pin 47 ashore" on your own, taking all the risks of losing the warranty and/or the drive on your own.

  Concerning

  chain

• DVD - ROM not reading DVD9 format video

  DVD - ROM in the Satellite L10-236 does not at all read DVD9 format video on DVD. Does anyone know if this format is available for these DVD-ROM (Matsu * a DVD-ROM + CD - R / RW) tweaks are required, or there is a break? Thank you.

  Hello

  Well, I m do not know what you mean by DVD9 but all the information on the supported DVD media and compatible you can find in the user manual. This document must be preinstalled on your device.

  Good bye

• Satellite Pro 2100: DVD - ROM not detected - need drivers

  Hello
  My DVD ROM disappeared also from 'my computer' and in the Device Manager.
  Where can I get a driver for the standard DVD ROM?
  Computer does not see the disk, how ' do it see the player "so that I can install the driver?

  All the words of wisdom?

  Hey riri,.

  Check in Device Manager to see if your DVD-ROM is listed and if so was it an exclamation mark against it? If it is, then simply remove it from your system and restart. Windows will identify as a new device and install with the correct driver.

  It is also possible that the drive may have 'disappeared' If you have recently removed any software DVD. It is a known issue and a solution is described in the following Microsoft Knowledge Base article: -.

  http://support.Microsoft.com/kb/320553/en-us

  Kind regards

• DVD rom not detected in the Bios & windows

  Mr President, in my computer the dvd rom is not detected in the Bios & windows. Send me a PSE with solution please.

  Hello

  1. which version of the windows operating system is installed in the computer?

  2. What is the brand and model of the computer?

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756

  (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  I also suggest you to connect with the computer manufacturing and update drivers for BIOS.

• DVD - rom not open or work

  I have a dvd-writer/cd-writer combo that operates. Below, I have a dvd - rom that is not open or read. That's happened? Can it be fixed?

  The following links may be a place to start:

  (982116) your CD or DVD drive is missing
  or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116
  (Windows XP / Windows Vista / Windows 7)

  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Beyond that...

  If you are uncomfortable, maintaining your own system...
  You can open the suitcase and try to put in place caps
  for the reader, but it sounds like the hardware failure.

  Reach... Device Manager and see if the drive is marked.

  The following article might be worth a visit:

  The symbols, Error Codes Windows Device Manager
  and definitions in Windows 95, 98, Me and XP
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00035740&cc=us&LC=en&DLC=en&product=3758068

  I suspect that the solution is to replace the drive.

  Good luck.

• drive DVD-rom not working-code 19?

  I have a dvd - rom Matshita drive does not. In the front of the device, it says "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) '. None fixes please? Thank you.

  Hello

  Do you have ANY suggestions I made in the listed order? If this isn't the case, please try again.

  Panasonic is owned by Matsushita (or Mashita).

  You should be able to get the drivers or firmware of your system manufacturer upgrades
  If there is any. Most readers use the default settings of Windows. Check with Panasonic Mashita.

  You can also get information from the firmware here:

  http://Club.myce.com/F36/

  And probably by car help here:

  http://Club.myce.com/F46/

  I hope this helps and happy holidays!

  Rob - bicycle - Mark Twain said it is good.

• CD-ROM/DVD-ROM not working-Code 39

  Inserted a disk and found that my CD-ROM/DVD-ROM is not working. For Device Manager and got this message:

  Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  The device is Optiarc DVD RW AD-7560 s

  With the help of Windows Vista, ACER Aspire 6930

  Tried to find solutions, but nothing happened... need suggestions on how to solve this problem.

  Thank you

  Hello

  Code 39 means that the driver is corrupted or missing.

  Please make all below even if you have done some before as it is often the total process
  which solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, and then make sure that the cables
  at both ends. Remove and replace, do not just tight. For laptops, you can clean it often
  power and contacts data with a pencil eraser.

  --------------------------------------------------------------

  Also check with your system manufacturer to see if there are any updated drivers for your DVD.
  Or even if there are the 'old', you can reinstall. Many use the default Windows drivers
  However, some will be more special. Also check the website of the manufacturer of the car.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• CD/dvd-rom not detected by Windows

  I have the same problem as the previous people, except that I can't download Mr. Fixit.  I get an error message.  I've had friends get into my computer to find my DVD - ROM drive and they can't find it.  They have removed upper and lower filters and may not always know where the cd/dvd-rom drive disappeared.

  Anyone know how I can download or access Mr. fix it so I can start trying to solve the problem

  I get a microsoft error message that says this:

  We're sorry, but we met an unexpected problem and cannot complete this diagnostic solution.

  You can use the link below to create a shortcut to our solutions set and try again later.
  Place a shortcut on my desktop for Microsoft Automated Troubleshooting Services fix it solution
  An unexpeced error occurred and were unable to create the shortcut.

  As I said we did the manual way and that did not solve the problem

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the system manufacturer
  and the manufacturer of the device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Help with pc DVD rom not recognize more

  I installed a plug magic on my pc when I lived in the Virgin Islands, and it has taken the place of my dvd rom player.. and the dvd rom is completely non-functional... often you please tell me how to get it back so that the pc recognizes? Any help would be appreciated...
  Thank you very much
  

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  Fix for CD/DVD drive missing:

  http://support.Microsoft.com/kb/982116

• DVD ROM not reading CD

  Hello world

  System manufacturer: DELL Inc..

  System model: Vostro 1015

  OS: Windows 7 64-bit

  I'm having a problem with dvd - ROM does not detect not the disc?

  The player turns upward discs at all?  If so, see the next step.  If not, the drive is toast - replace it with a new one.

  If the disc is spinning, but it will not read the system, start safe mode (press F8 repeatedly until WIndows starts loading).  See that if the system will read the disc in safe mode - if it is, you have a driver problem.  If you have any CD/DVD software installed in read/write, uninstall, reboot and reinstall.

  If the drive will not read a disc even in safe mode, it's the toast - replace the drive.