DVD rw is not recognized as writable.

Similar Questions

• Re: CD/DVD drive is not recognized correctly on my Equium P200

  I recently bought a laptop P200D and now, I found that the CD/DVD drive is not recognized.

  In Device Manager the drive icon has a yellow on exclamation and in the wealthy area it says "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  I tried uninstalling the drive and then to restart the laptop but it is has not been successful. I recently downloaded and installed the Service Pack 1 for Vista and I have read that there have been problems with device drivers and wonder if there is such a body?

  Are there updated drivers available for this device?

  Thanks for any help you can give.

  Lester Mortimore

  Hello

  Check this thread http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=113742 please

  I hope this will help you.

• Tecra M5 - DVD - Ram is not recognized

  Hello

  This is my 1st post, so this is.
  I have a Toshiba Tecra M5 my old drive has just started to slow down, I bought a new drive Tsstcorp SN-S082H/baby.

  When I slot the drive in the Bay is not recognized by the system immediately unless I'm going to add harware and ASNA for new hardware, and then he picks it up,.
  When stop & restart lappy dvd - ram is not recognized by the system, or BIOS, the light on the flange of the discs is on but when I press the button open nothing happens. I installed the latest firmware, I also don't you any driver of indevice error messages sound as if the reader is not installed, but the light on the drive is turned on but does not open.

  Some1 can help me please?

  Model name: SN-S082H/baby
  Code OEM: TS
  F/W ver. SB01

  Follow the instructions posted by Akuma. Maybe this can solve the problem.

  Also, I checked the Tecra M5 user manual. There is a list with compatible DVD players, and your new drive is not listed. Not every drive is compatible with any laptop.
  If it doesn t work get the reader to the merchant computer buy a compatible player that is listed in the user manual:

  TEAC CD-224EN
  TEAC DV-28EN
  CCP UJDA770
  TSST TS-L462C
  Pioneer DVR - K16
  CCP UJ-841

• DVD player is not recognized correctly - Equium L100

  Can help any 1 Please my DVD - RW is not recognized in my system. Sometimes I boot and it is there, but other times I start up and it is not shown in my computer or Device Manager
  
  Seriously frustrated.

  Hello

  Please try this http://support.microsoft.com/kb/314060/en-us

  Is the DVD drive in the device with the yellow exclamation point Manager?

• CD/DVD drive is not recognized on Satellite Pro L10

  Hello. can someone help me with the following: -.

  My DVD drive is not recognized on my computer and in the material properties, it says that my CDW/DVD driver may be damaged and needs re-setup or "updated".

  the (r) drive is shown as TSST Corp TS-L462A - can I get the update
  Download Driver from the site? (is it free?)

  Thanks for any help

  Paul

  Hi Paul,.

  You don't say what model of laptop you have, but generally speaking if you are using Windows XP then you will use the standard Microsoft drivers for your scanner.

  However, you can Toshiba drivers and utilities download from Toshiba web site by clicking on the Support section and downloads and selection of files to download. You will need to fill in the details of your laptop so that the list of appropriate driver (unless you have provided these details when you register).

  Kind regards

• CD/DVD drive is not recognized by Windows or other programs. HP Pavilion s7310n Slimline PC

  He used to work. It comes from when the computer was around the age of 4 months. should have put in, but could not take the days off to bring it back to BEST BUY - 2 years ago.

  Then... the CD/DVD drive is not recognized by Windows or other programs. If I insert a CD as Photo Suite III or any what CD/DVD, the green light comes on but no rotation and not even a warning to error.

  Now what? How can I find out / know the specs of what to look for a replacement/new one... I lost the book in my move to Florida. I have tried all sorts of key word in GOOGLE and I am half blind and tired to be re-directed to sites that have nothing to do with my question.

  Can someone help me please? Thank you. TJ Rev.

  PS... None of the links in the Solution of Sissy2 DIFFICULTY to where they are supposed to. I don't think it's my problem anyway.

  MY CD/DVD drive is dead.

  Message edited by aalienlady on 05/21/2009 21:32
  Message edited by aalienlady on 05/21/2009 21:32

  Download XP_CD-DVD - Fix.zip and save this file on your hard drive. Navigate to where you saved it, and double-click the file to extract the content. Find the EXE file that you extracted and double click it.  A confirmation dialog box appears when the script is done.  You may need to reboot for the change to take effect. Works on XP and Vista. Good luck!

• Error message: "Windows cannot start this hardware device because its configuration (in the registry) information are incomplete" and DVD disc is not recognized.

  Original title: My DVD drive is not recognized, it works physicaly works fine, but the pc does not even detect it exists.

  The error that says: "Windows cannot start this hardware device because its configuration (in the registry) information are incomplete."

  I did a backup and restored my system to the factory settings. After doing this still dvd was not recognized. I don't know what to do, my computer is new and Security told me that they will restore the pc and try to fix it, I can't risk my documents of the University are the same that has not worked for me before.
  Could someone help me?
  -The pilot is the last in line.
  -The works of reader dvd but the computer is not reading it, it does not even appear on the section 'computer '.
  -J' tried to use a "fix - it" on Microsoft online, but it doesn't work anymore.
  -My OS is Windows 7.
  -A restore factory settings did not work at all.
  Thank you.
  Claudio Nahmad
  Mexico City

  Hi, Claudio Nahmad,.

  This error can occur if the data in the registry for the device and its driver has been corrupted.

  Since you have already done a factory restore, leave, try to uninstall and reinstall the driver CD\DVD and check if it helps.
  Code 19: Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged

  We can also refer to article and check if it helps.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  Important: The above links contains steps to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information, you can view the article:

  Back up the registry

  You can also try to install Windows updates, including optional updates driver and check if that helps.

  Install Windows updates in Windows 7

  Hope the helps of information.

• Satellite M40X - DVD drive is not recognized

  I bought a new satellite pro m40x yesterday and today everything worked fine but today the dvd and cd rom is not recognized more. I don't know about cell phones, what can I do? I don't want to return it to Toshiba and wait 4 weeks to get it back.
  My son needs the notebook the week next to the school.

  Hi Christine,

  Please check in the Device Manager to see if there's anything showing against your CD-ROM drive. If your CD-ROM is always displayed, you should be able to run the process of troubleshooting against it to check for possible errors.

  If your CD-ROM is more listed and then launch the 'Scan for hardware changes' option to see if it detects your CD-ROM.

  HTH

• Re: New DVD player is not recognized - Satellite 5200 801

  The old DVD drive no longer works, so I bought a new DVD player (SonyNEC Optiarc AD - 7593A).
  But the system does not recognize the new drive at all.

  I can not boot from the CD and in the hardwaremanager, there is no CD/DVD.

  But the drive works. If I put a CD in, you can hear how he turns upward.
  If I put the old drive, it is recognized in the hardwaremanager, but the reader no longer works.

  Any ideas?

  Thank you
  FO

  > But the drive works. If I put a CD in, you can hear how he turns upward.

  It says nothing! You can hear the rotating disc because it s connected to the laptop and it s operated.

  The BIOS is important! Your new CD/DVD drive is recognized in the BIOS?

  If not, then you have purchased NOT compatible CD/DVD player!

  I think that the master/slave/c-salt settings are not compatible with the laptop and so the CD/DVD drive may not be recognized.

• Equium A60: DVD - RAM, being not recognized correctly

  Hiya!

  I have an EA60 and my carpet * a DVD-RAM UJ-820 s is currently not recognized by the laptop properly. When I go to device drivers, he said the driver has been loaded but returns the error code 41. I reloaded the Driver and the device, and it makes no difference.

  I also bought a new Pioneer DVD-RAM and it comes up with the same error code.

  Can someone help me please?

  [email protected]

  Kind regards

  Gary

  To start the registry editor
  Click Start, run, type regedit, and then click OK. Start the registry editor.

  Then follows the steps described above.

• Connected to the Portege 3500 USB DVD burner is not recognized correctly

  I am trying to connect a burner DVD HP DVDv 940th my 3500.When Portege I plug in the device, it is not recognized and the Device Manager list as a storage of unknown mass without a driver. Where can I get this driver?

  Hello

  Try to check the assumption of the manufacturer or the download page. Manufacturers of portable gift use support external devices t produced by other companies.

• HP Pavilion DV4 1225dx: HP dvd dvd RW Options not recognized by laptop

  This Optiarc worked fine, but now, is not recognized by the BIOS

  Hi Baldin,

  Try to unplug/remove the DVD writer and released in...  (Cela that plugged while on and battery removed).

  If it do work, then try to update the driver from the Optiarc...

  If that too fails, then probably, your burner is dead...

  -Raj

• Why can't copy files to DVD + R... not recognized

  Hello..  I am trying to copy the files on a dvd + r disc, but the drive is not recognized. HWiNFO32 among others assure me my dvd drive can play & read...

  CD - R, CD - RW, DVD-R, DVD - RW, DVD + R, DVD + RW, DVD + R DL.  Any advice would be welcome. I am running XP Pro SP3 with all available updates.

  Windows XP Windows Explorer does not recognize the DVD as an accessible destination in writing.

  You must install and use a third-party software like ImgBurn to write data on DVD.

• External CD/DVD RW drive not recognized by Windows XP

  Original title: Professional. Have an advantage humbucker 16 X 8 DVD/CD RW & ATi Radeon 9550 AGP 250 M for video and VGA that is not recognized

  Have a double microphone 16 X 8 DVD/CD RW advantage which is not recognized by XP Professional.  Also have a CD unit and when windows installs the drivers - it gives them both the same driver.  DVD RW is only recognized as a CD! Have used Microsoft fixit and he says everything is fine. -It uses the same driver for CD and DVD RW units.

  Have also an ATi Radeon 9550 AGP 250 M for the video and VGA and Windows XP does not - have question marks for them in Device Manager.  Microsoft fixit - did fix this problem.

  Have deleted the drivers and tried to control the computer for downloads by Microsoft and it can't find them - if I do a check for hardware changes, he finds only those who do not work properly and that don't work at all, as indicated above.

  Also went on the Microsoft Web site and cannot find a solution it - clicked on links with any help that I could see.

  Sorry for the problem - just fusterated

  LF

  Hello

  To work around this problem in Microsoft Windows XP, follow these steps:

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article http://support.microsoft.com/kb/322756

  Step 1: Remove the registry entries modified. To do this, follow these steps:

  a. Click Start, click Run, type regedit and then click OK.

  (b) in the navigation pane, search for, and then click the following registry subkey:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  (c) in the right pane, click UpperFilters.

  d. in the Edit menu, click on delete.

  e. When you are prompted to confirm the deletion, click Yes.

  f. in the right pane, click LowerFilters.

  g. in the Edit menu, click on delete.

  h. When you are prompted to confirm the deletion, click Yes.

  i. exit the registry editor.

  j. restart the computer.

  Note: If you notice a loss of functionality in a particular program as in the CD recording software after you remove registry UpperFilters and LowerFilters values, reinstall this software. If this problem continues, contact the supplier of software to help.

  Step 2: Remove the existing drivers. To do this, follow these steps:

  a. Click Start and then click Control Panel.

  b. If the control panel is in category view, click performance and Maintenance and then click System.

  c. If the control panel is in Classic view, double-click System.

  d. click the Hardware tab, and then click Device Manager.

  e. expand CD-ROM/DVD-ROM drives, right click on the device CD and DVD and then click on uninstall.

  f. When you are prompted to confirm that you want to remove the device, click OK.

  g. restart the computer.

  Note: after you restart your computer. the drivers will be automatically installed.

  See: http://support.microsoft.com/kb/982116/en-us

• On laptop CD/DVD drive is not recognized/is missing. Having read the other topics, problem still not solved.

  I'm on a computer laptop gateway and my cd player does not work all of a sudden. I can eject and put CD in there and it will hum for awhile, but nothing will happen. I went to Device Manager and it is not yet listed. I read the other topics and the problem is still not resolved, please help. Also, my HKEY_LOCAL_MACHINE folder has not all folders in there, so I can't go to system/etc to delete anything because there is nothing to remove. Thank you for your time

  Hello

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers to check with the system manufacturer to see if there is a firmware or drivers for your if necessary.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.