HP Pavilion DV4 1225dx: HP dvd dvd RW Options not recognized by laptop

Similar Questions

• HP Pavilion DV4-1225dx remote control drivers

  I have a HP Pavilion DV4-1225dx, I bought at bestbuy and I am running windows 7 64 bit, I was wondering if there was drivers availible for remote control of my laptop, I would prefer not having to install the whole suite of HP, but I'd do it if it means I could make it work I used 64-bit drivers for vista for the rest of the machine and they all worked perfectly, but for remote control Setup crashes my whole upward machine when I try to start it, if anyone has any ideas?

  Try this driver.

• leader revovery pavilion dv4 1225dx

  My pavilion dv4 1225dx stopped randomly start, showed a blank screen and the caps and scroll lights were blink every few seconds. What I've read, it is unfortunately a major problem. I tried a hard reset, taking and in the stack, the stack of the RTC, try different combinations of these two modules and WLAN module to see if the computer should start without it. Nothing has worked.

  I understand that my computer is done at this stage, but I need to get the files out of it. Can I use a USB adapter cable to transfer the files from my hard drive? If so, how?

  -Desperate and tired-

  Hello

  Probably your best option is to remove the hard - see Page 68 of your Service Guide & -place it in an external enclosure (an example of what you need is on the link below), that connect to another PC and see if you can access your files.

  External 2.5 HARD drive caddy ".

  Kind regards

  DP - K

• HP pavilion dv4-1225dx windows wireless controller 7

  I have a laptop laptop HP Pavilion dv4-1225dx originnaly came with the Windows Vistaoperating system, but I updated to this OS with Windows 7 Professional , and when I did this, the Wireless card no longer works.

  In fact, the laptop is not able to connect to any wireless network, because the wireless card is still OFF, and when I try to on, it is not possible.

  I did all the suggestions and help, but finally, the suggestion was to post my problem here to find a solution. I hope someone can help me.

  Can you help me find a solution to this problem?

  I'd appreciate any comments or help you can give me. Thank you very much!!

  Dear friend,

  In fact, I found a solution. It was strange for me but now the wireless adapter works and its light is now blue (on).

  I need to download the site Web HP some software and steps that help me to solve the problem are:

  The solution that I found:

  0) BIOS upgrade (perhaps this step is not necessary but for now when I tried to solve my problem I did)

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-86224-1&CC=US&DLC=&LC=en&os=4062&Product=3860437&sw_lang=

  (1) download and install the HP wireless assistant package. This will help for sure to activate and put the wireless button and wireless adapter.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-76368-1&CC=US&DLC=&LC=en&os=4062&Product=3860437&sw_lang=

  Anyway thanks for your reply. Now, I found the solution and is great as well run the laptop.

• CD/DVD drive is not recognized by Windows or other programs. HP Pavilion s7310n Slimline PC

  He used to work. It comes from when the computer was around the age of 4 months. should have put in, but could not take the days off to bring it back to BEST BUY - 2 years ago.

  Then... the CD/DVD drive is not recognized by Windows or other programs. If I insert a CD as Photo Suite III or any what CD/DVD, the green light comes on but no rotation and not even a warning to error.

  Now what? How can I find out / know the specs of what to look for a replacement/new one... I lost the book in my move to Florida. I have tried all sorts of key word in GOOGLE and I am half blind and tired to be re-directed to sites that have nothing to do with my question.

  Can someone help me please? Thank you. TJ Rev.

  PS... None of the links in the Solution of Sissy2 DIFFICULTY to where they are supposed to. I don't think it's my problem anyway.

  MY CD/DVD drive is dead.

  Message edited by aalienlady on 05/21/2009 21:32
  Message edited by aalienlady on 05/21/2009 21:32

  Download XP_CD-DVD - Fix.zip and save this file on your hard drive. Navigate to where you saved it, and double-click the file to extract the content. Find the EXE file that you extracted and double click it.  A confirmation dialog box appears when the script is done.  You may need to reboot for the change to take effect. Works on XP and Vista. Good luck!

• Re: CD/DVD drive is not recognized correctly on my Equium P200

  I recently bought a laptop P200D and now, I found that the CD/DVD drive is not recognized.

  In Device Manager the drive icon has a yellow on exclamation and in the wealthy area it says "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  I tried uninstalling the drive and then to restart the laptop but it is has not been successful. I recently downloaded and installed the Service Pack 1 for Vista and I have read that there have been problems with device drivers and wonder if there is such a body?

  Are there updated drivers available for this device?

  Thanks for any help you can give.

  Lester Mortimore

  Hello

  Check this thread http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=113742 please

  I hope this will help you.

• Tecra M5 - DVD - Ram is not recognized

  Hello

  This is my 1st post, so this is.
  I have a Toshiba Tecra M5 my old drive has just started to slow down, I bought a new drive Tsstcorp SN-S082H/baby.

  When I slot the drive in the Bay is not recognized by the system immediately unless I'm going to add harware and ASNA for new hardware, and then he picks it up,.
  When stop & restart lappy dvd - ram is not recognized by the system, or BIOS, the light on the flange of the discs is on but when I press the button open nothing happens. I installed the latest firmware, I also don't you any driver of indevice error messages sound as if the reader is not installed, but the light on the drive is turned on but does not open.

  Some1 can help me please?

  Model name: SN-S082H/baby
  Code OEM: TS
  F/W ver. SB01

  Follow the instructions posted by Akuma. Maybe this can solve the problem.

  Also, I checked the Tecra M5 user manual. There is a list with compatible DVD players, and your new drive is not listed. Not every drive is compatible with any laptop.
  If it doesn t work get the reader to the merchant computer buy a compatible player that is listed in the user manual:

  TEAC CD-224EN
  TEAC DV-28EN
  CCP UJDA770
  TSST TS-L462C
  Pioneer DVR - K16
  CCP UJ-841

• DVD player is not recognized correctly - Equium L100

  Can help any 1 Please my DVD - RW is not recognized in my system. Sometimes I boot and it is there, but other times I start up and it is not shown in my computer or Device Manager
  
  Seriously frustrated.

  Hello

  Please try this http://support.microsoft.com/kb/314060/en-us

  Is the DVD drive in the device with the yellow exclamation point Manager?

• CD/DVD drive is not recognized on Satellite Pro L10

  Hello. can someone help me with the following: -.

  My DVD drive is not recognized on my computer and in the material properties, it says that my CDW/DVD driver may be damaged and needs re-setup or "updated".

  the (r) drive is shown as TSST Corp TS-L462A - can I get the update
  Download Driver from the site? (is it free?)

  Thanks for any help

  Paul

  Hi Paul,.

  You don't say what model of laptop you have, but generally speaking if you are using Windows XP then you will use the standard Microsoft drivers for your scanner.

  However, you can Toshiba drivers and utilities download from Toshiba web site by clicking on the Support section and downloads and selection of files to download. You will need to fill in the details of your laptop so that the list of appropriate driver (unless you have provided these details when you register).

  Kind regards

• DVD rw is not recognized as writable.

  DVD rw is not recognized as writable. Difficulty of MS used. Did not work. installed a new drive. still not recognized. any other ideas?

  Hi jp1681,

  ·         This fixit did you use?

  ·         The drive to read but not write disks?

  Method 1: We will uninstall the DVD drive in Device Manager and reinstall.

  a. click the Start button and then right click on my computer. Click on properties.

  b. click on the Hardware tab, and then click Device Manager.

  c. now, expand the CD-ROM/DVD-ROM drives, click with the right button on the CD-ROM/DVD-ROM drive and click on uninstall.

  d. restart the computer.

  Method 2: Log on to the manufacturer of the DVD drive and install the latest updates from driver\firmware.

  Method 3: If you are not able to read any DVD, check if you have followed the article mentioned below.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

• Error message: "Windows cannot start this hardware device because its configuration (in the registry) information are incomplete" and DVD disc is not recognized.

  Original title: My DVD drive is not recognized, it works physicaly works fine, but the pc does not even detect it exists.

  The error that says: "Windows cannot start this hardware device because its configuration (in the registry) information are incomplete."

  I did a backup and restored my system to the factory settings. After doing this still dvd was not recognized. I don't know what to do, my computer is new and Security told me that they will restore the pc and try to fix it, I can't risk my documents of the University are the same that has not worked for me before.
  Could someone help me?
  -The pilot is the last in line.
  -The works of reader dvd but the computer is not reading it, it does not even appear on the section 'computer '.
  -J' tried to use a "fix - it" on Microsoft online, but it doesn't work anymore.
  -My OS is Windows 7.
  -A restore factory settings did not work at all.
  Thank you.
  Claudio Nahmad
  Mexico City

  Hi, Claudio Nahmad,.

  This error can occur if the data in the registry for the device and its driver has been corrupted.

  Since you have already done a factory restore, leave, try to uninstall and reinstall the driver CD\DVD and check if it helps.
  Code 19: Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged

  We can also refer to article and check if it helps.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  Important: The above links contains steps to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information, you can view the article:

  Back up the registry

  You can also try to install Windows updates, including optional updates driver and check if that helps.

  Install Windows updates in Windows 7

  Hope the helps of information.

• Satellite M40X - DVD drive is not recognized

  I bought a new satellite pro m40x yesterday and today everything worked fine but today the dvd and cd rom is not recognized more. I don't know about cell phones, what can I do? I don't want to return it to Toshiba and wait 4 weeks to get it back.
  My son needs the notebook the week next to the school.

  Hi Christine,

  Please check in the Device Manager to see if there's anything showing against your CD-ROM drive. If your CD-ROM is always displayed, you should be able to run the process of troubleshooting against it to check for possible errors.

  If your CD-ROM is more listed and then launch the 'Scan for hardware changes' option to see if it detects your CD-ROM.

  HTH

• Re: New DVD player is not recognized - Satellite 5200 801

  The old DVD drive no longer works, so I bought a new DVD player (SonyNEC Optiarc AD - 7593A).
  But the system does not recognize the new drive at all.

  I can not boot from the CD and in the hardwaremanager, there is no CD/DVD.

  But the drive works. If I put a CD in, you can hear how he turns upward.
  If I put the old drive, it is recognized in the hardwaremanager, but the reader no longer works.

  Any ideas?

  Thank you
  FO

  > But the drive works. If I put a CD in, you can hear how he turns upward.

  It says nothing! You can hear the rotating disc because it s connected to the laptop and it s operated.

  The BIOS is important! Your new CD/DVD drive is recognized in the BIOS?

  If not, then you have purchased NOT compatible CD/DVD player!

  I think that the master/slave/c-salt settings are not compatible with the laptop and so the CD/DVD drive may not be recognized.

• Equium A60: DVD - RAM, being not recognized correctly

  Hiya!

  I have an EA60 and my carpet * a DVD-RAM UJ-820 s is currently not recognized by the laptop properly. When I go to device drivers, he said the driver has been loaded but returns the error code 41. I reloaded the Driver and the device, and it makes no difference.

  I also bought a new Pioneer DVD-RAM and it comes up with the same error code.

  Can someone help me please?

  [email protected]

  Kind regards

  Gary

  To start the registry editor
  Click Start, run, type regedit, and then click OK. Start the registry editor.

  Then follows the steps described above.

• Connected to the Portege 3500 USB DVD burner is not recognized correctly

  I am trying to connect a burner DVD HP DVDv 940th my 3500.When Portege I plug in the device, it is not recognized and the Device Manager list as a storage of unknown mass without a driver. Where can I get this driver?

  Hello

  Try to check the assumption of the manufacturer or the download page. Manufacturers of portable gift use support external devices t produced by other companies.