my cd player can read cd/DVDs, but will not recognize a cd for copy/writng? Help

Similar Questions

• After upgrading my Dell D820 from XP to Win 7 Home Premium 64-bit, the philips dvd sdvd8820 drive continuously tries to read movie dvd, but will not play them.

  You can hear the cd/dvd tent drive to access the dvd, but he just keeps trying without offering me options such as what program to use! I checked for the driver and updates of firmware without result! I also tried the 'fix' function and any other help Windows 7 without success. In the Device Manager, it says all working correctly.

  Hello

  Thank you for your response.

  I suggest you to uninstall and reinstall the driver of DVD in Device Manager.

  (a) click Startand then click Control Panel.

  (b) click system and Maintenanceand then click System.

  (c) in the hardware tab, click Device Manager. If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  (d) in Device Manager, expand CD-ROM/DVD-ROM drives, right click on the device CD and DVD and then click on Uninstall.

  (e) when you are prompted to confirm that you want to remove the device, click OK.

  (f) restart the computer.

  After the computer restarts, the drivers will be installed automatically.

  You can also search for a driver updated the manufacturer and install the latest version.

  Hope this information is useful.

• Trying to install Adobe Creative Suite 5 Design Premium, but will not recognize the serial number?

  I am trying to install Adobe Creative Suite 5 Design Premium on a PC but will not recognize the serial number? What should I do?

  I also have Adobe Acrobat 9 on my Mac and it is now saying that I have to throw "Adobe Photoshop Creative Suite 5 Design Premium". When I do that nothing happens with Acrobat 9, and it closes. I tried to reinstall the disk without success.  What should I do?

  Invalid License http://helpx.adobe.com/creative-suite/kb/error-serial-number-valid-product.html

  -http://helpx.adobe.com/creative-suite/kb/invalid-serial-number-cs4.html

  - and http://forums.adobe.com/thread/1038761

  Given that Adobe can't CS5, I think that above, is what it is

• DVD Player cannot read the DVDs (but can read busy DVD)

  Hello

  I have Hp Pavilion dv6-6140us, a 64-bit engine and is running windows 7... I wanted to burn the iso of windows 8, but my dvd player is not able to read blank dvd, but it can read the non-empty disc and can also play movies... Please help... want to try to win 8 preview release

  Hello

  Follow these steps to reinstall the Beats Audio interface.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp52501-53000/sp52658.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are done, reboot the laptop and let Windows load completely.  Open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  When this has completed, restart the computer again.

  Kind regards

  DP - K

• DVD stopped working got external dvd but no not disks work runs for a few seconds then stops

  has had to put the new hard drive in the computer. When I got back that DVD has worked for a while then stopped. Downloaded the software and drivers to try to fix the problem, but no luck. I tried an external but computer dvd for some reason any will not recognize the unit. I also have a legacy of clickfree backup, but now that my dvd works not the clickfree will not work. I have also reinstalled the dvd but that did not work. any ideas?

  Hello

  ·         What operating system do you use?

  Follow these methods and check if that helps.

  Method 1:

  Run this Microsoft fixit t tool and check if it helps.

   

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems

  Method 2:

  I suggest you follow the troubleshooting steps form the article and check if it helps.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060

• Take the tool does not. Take the tool selected - can see the hand but will not take anything

  Hello

  I'm new to photoshop and I am currently working through the tutorials on Lynda.com to learn as much as I can, but I'm stuck at the minute. Tutorials wants me to use the Snipping Tool to move an image and no matter what I do nothings moving. I selected the tool and see that it is selected and that the needle moves on the image but it is not striking, no selection.

  I also did with the letter to select the capture tool. Once again, this works, but will not take anything.

  Any entry in this problem would be highly appreciated. Thank you

  Hi Clara-beautiful,

  Hand tool is running when your image is enlarged and that you want to move to a specific part of the image.

  You must move your image with the mouse after a zoom once you have selected the hand tool.

  Are you a person following the same steps in workflow or other?

• Satellite A500-141 - the CD/DVD drive will not recognize any disk in the status bar

  I watch the DVD yesterday and he played upward halfway through and almost jerky. Ejected and thought no more of him now, the player will not recognize any disc, be it video or sound. I tried a system restore but still the same thing that it is not read disks. Any help appreciated.

  Thanks in advance.

  Hi quietly,

  If your CD/DVD drive doesn't work, how do you have a system restore?

  Is the CD/DVD drive listed in Device Manager correctly or you see a yellow exclamation mark on it?

  Maybe the lens is dirty and must be cleaned with a Microfiber cloth. Open try CD/DVD and try to clean the lens with a clean Microfiber cloth.
  Check this box!

• Some songs bought on Itunes and add them to an existing selection. They appear in the playlist and on computer but will not be synchronized to the Iphone. Help, please!

  Bought a few songs on ITunes and add them to an existing selection. They appear on the computer and in the playlist, but will not be synced to an existing selection on the IPhone 6. Help, please.

  This is the computer on which the phone is synchronized, and playlist is selected on the tab music from the phone to synchronize the phone? If the 'sync' button is not a copy the playlist update on you have tried to make a change on the screen of synchronization (for example in selecting/disable-selecting a playlist and sync and then get back on your original selection and re-sync)?

• CD drive won't burn dvd or read burned dvd but will play store bought dvd

  TSSTcorp cd/DVGW-ts-h652m ata device, it's my player to cd for some reason, I can't burn cd/DVDs, but the reader will read these and play them, also it won't read burned DVDs, Noah he reformatted dvd, how can I solve this problem

  Hello

  Have you tried to close all programs and then insert the disc in the drive?

  You have disk problem as the CD/DVD is actually 4 discs in 1 case (burn CD & DVD and CD and DVD read).
  Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  CD have a tolerance + - and you have to write on the side outside their tolerance. They can be given
  However, it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  -----------------------------------------------------------------------

  Try this troubleshooting:

  Step 1: Please make all underneath the same if you've done it before as it's often the total of the process which
  solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry entries
  that the troubleshooter does not, and those who "could" be the cause.

  Check with your system manufacturer Maker and device for possible firmware updates and the good
  Your player registry entries.

  Here are the keys in my opinion, are those in question - for the reader of CD/DVD subkeys of course that he will be
  other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even registry settings correct for your CD/DVD drive
  a person with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• My recently downloaded Windows Media Player 11 play dvd, audio cd and cd rom, but will not recognize two photos of the dvd which have been able to acknowledge by Media Player 10 and record of the Explorer Windows-with some difficulty

  1. Windows Media Player 10 has opened a photo successfully dvd but a message "Microsoft has encountered a problem and needs to close" came on the screen several times.  Had to re insert the dvd picture, but it would open again each time.
  2. Tried the cd drivers and troubleshooting dvd and was informed of my dvd could not be played because there was no decoder for dvd.  Following instructions and chose a windows xp approved decoder pack download - dvd has chosen the Roxio CinePlayer DVD Decoder Pack.
  3. Then upgraded the media player to Windows Media Player 11.
  4. After that, dvd and cd rom could be opened by the media player 11, but neither the DVD or cd ROM readers would recognize the photo DVD in question had been inserted into one of these discs, and even less to be opened by the media player.
  5. Program scanner and photo used to transfer my photos printed digitally on a dvd are trademarks of Hewlett-Packard.  Contact the center of the photo, but they could not provide me with any guidance or even particular HP photo program they used to create the dvd picture.  I remember the photos were stored on the dvd in JPEG format picture and was able to open by Windows Explorer before I've updated since WMP 10-11.

  "" I remember well, the pictures are stored on the dvd in JPEG format picture and was able to open by Windows Explorer before I've updated since WMP 10-11 ""

  Looks like you have a data dvd, which has just the pictures on it and it will not be seen by WMP, who needs a dvd-video disc.

  It should always open in windows Explorer and you should be able to see your pictues it.

• My Windows 7 will play a DVD, but will not play the DVD-ROM of the drive section.

  I can play a DVD movie disc, but when I get to the DVD-ROM portion of the disc I can not get this article to play.  Any suggestions?  I have Windows 7.

  It happens within WMC only? Have you tried the same thing with VLC Player?

• Flash Player seems to settle down, but will not work

  Flash Player installs but does not work.  When I go to the troubleshooting website (http://helpx.adobe.com/flash-player.html), the box fills the information.  If I right click where the box should be, however, the menu display version information and behaves as if the AFP is installed.  I cannot select parameters, but can select global settings.  The global settings dialog box opens.

  I use version 11.7.700.169, using IE 9 AFP and running Windows 7.  I have 2 other PCs, and both deliver the program very well.  So far, I have tried many things to solve problems with no luck.

  So far:

  -Uninstall complete, using the Adobe uninstaller program.  I deleted the folders and content and, close and tried to reinstall.

  -J' deleted the registry entry and also tried assigning zero value located at the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Internet Explorer\ActiveX Compatibility\ {D27CDB6E-AE6D-11CF-96B8-444553540000}. 

  -J' use Norton 360 and attempted an install with all services stopped (anti-virus, anti-Spam, protect Auto, etc.)

  -J' checked filtering ActiveX is not checked in IE.

  -Active X and the options of script in Internet Explorer > tools > Internet Options are enabled and the selections on both PCs in mirror work.

  -J' tried to uninstall and reinstall an earlier version of AFP with no luck.

  -Shockwave Flash Object Addon is enabled.

  Screenshot is included to show what is happening on the screen to redirect after that I installed AFP.

  I am running out of ideas and would appreciate any help on this.

  Thank you!

  

  I am a little disappointed by the forums - no responses.  I am happy to share, I found the problem and I share the solution in case others have the same problem.  The interesting thing is the setting that I've changed, it's different on the two computers to work.  In IE9, go to tools > Internet Options > advanced and the first graphics acceleration checkbox... check it out.  Restart IE and voila, it's fixed.  The other two PCs that I use have this box unchecked and AFP works fine... weird.

• WIFI on my C850 Satellite can detect the network but will not connect

  I just bought a satellite C850 - PSKCCA-02D00M

  The connection to the LAN works fine however the Realtek RTL8723AE without wireless/Bluetooth will not connect to the network. It can can detect them just does not connect. I used the troubleshooting, and he cannot sort.

  All other devices connect very well as Iphones and Kindle

  In the config is doctor says that the adapter is enabled in a domain and in the adapter another status is down.

  I took back to the initial power and installing and unistalling and reinstalling the adapter using the driver on the website.

  Any help is welcome. I don't want to have to take back just for this issue

  See you soon

  Your WLAN is locked? Can you connect WIFI if you delete the WIFI password for two minutes?
  Have you tried to reboot your router?

• Drive DVD - RW will not recognize disks

  Original title: dvd

  my dvd rw HP drive does not recognize any disk put here, I tried cleaning but it does not work

  Your CD or DVD drive is missing or is not recognized by Windows or other programs:

  http://support.Microsoft.com/kb/982116

  Your CD or DVD drive cannot read or write media - Fix It:
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

• WAG54GS allows wireless clients to connect but will not assign IP addresses for full connectivity

  I have three XP 3 computers connected between them in a MS home network via a wired hub and access to the internet through a wired connection to a router WAG54GS.  DHCP is enabled on the router, the IP addresses are correctly assigned and internet access to these computers Wired is not a problem.

  In the past, I've connected also with success of laptops to the internet via the feature wireless router, but having not used that for a while, I think now it will not work.  I tried to connect with laptop computers running XP 2 and Vista Home and the problem is the same.  Laptops find broadcasting wireless router and connect but they are not assigned IP addresses during the phase of "Acquiring IP address" resulting in a "Limited or no connectivity message."  Packets are sent to the router, but none are received in return. It is with the strength of the Signal at 73% and the quality of the link to 100%.  Ipconfig displays no deafult assigned gateway and the IP auto configured to be 169.254.96.1 for example.  Ping the router gives "Destination host unreachable".  Not surprisingly, laptops are able to 'see' other computers wired on the MS. network  These laptops connect correctly to the MS network and internet if I change the wired connection.

  If I check the status of the network wireless router configuration good laptops MAC addresses are displayed, but the computer name and the IP address are missing.  I usually use a protection WEP 128 bit on two channels 6 and 13, but it makes no difference if I change this without guarantee, once again the connection occurs, but no IP address is assigned.  DHCP is enabled in the tab for basic configuration of router from 192.168.1.100 with selected up to 50 users DHCP (and DHCP works very well for cable customers).  The IP address of the router is set to 192.168.1.2.  Wi - Fi router is set to "allow everything".  Default settings are used for the parameters wireless advanced, although I tried to reduce the 100 interbval tag at 50 and the RTS and Fragmentation threshold to 2304.  The policy of Internet access on the router is disabled.

  If I have (for purposes of testing only) connect laptops to one of my neighbors secure networks (there are several) to connect laptops very well so I can access the internet, DHCP works great on laptops.  Firmware is v1.00.08 (I looked this modernization, but while I can identify my router version 1.2 downloads talk about types of Annex A and Annex B are mutually exclusive and I'm not clear I have.  I am also doubtful as to if the firmware upgrade would make a difference, because there is no trace of the upgrade solve this kind of problem and I had the Wireless does not work if long ago).  I'm running out of ideas, is there something that I missed?

  Well in this case you can try to upgrade the firmware of your router, go to the website http://www.linksysbycisco.com/UK/en/support/WAG54GS/download...insert of your router model serach tab... select the correct version of your router... Download the firmware file... save this file on the desktop.

  Follow these steps to upgrade the firmware of the device: -.
  Open a page in Internet Explorer browser on a computer hard wired to the router...
  In the address bar type - 192.168.1.1... Leave the name blank username & password use admin lowercase...
  Click the 'Administration' tab - then click on the 'Upgrade Firmware' under the tab-here, click on 'Browse' and navigate the .bin firmware file and click on "Upgrade"...
  Wait a few seconds until it shows that "the update is successful," after the upgrade of the firmware, click on "Reboot" and you will be returned to the same page OR it will say 'cannot display the Page.

  Now reset your router:
  Press and hold the button of reset for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...

  Once you re-configured settings of your router, and you are able to go online Wired computer, here are some settings that you can configure your wireless router, I think this might solve your problem

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1
  Let the empty user name & password use admin lowercase...
  For wireless settings, follow these steps: -.
  Click on the Wireless tab
  -Here, select manual configuration... Wireless network mode must be mixed...
  -Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors...

  -Set the Standard - 20 MHz Radio band and change the Standard channel to 11-2, 462 GHz... Wireless SSID broadcast should be enabled and then click on save settings...
  Please take note of the name of the wireless network (SSID) because it's the network identifier...
  For wireless security: -.
  Click the sub-tab under wireless > Wireless Security...
  Change the mode of WEP wireless security, encryption must be 64-bit. Let the empty password, do not type in anything... Under type of WEP Key 1 in all 10 numbers please (numbers only and no mailbox for example: your 10-digit phone number) and click on save settings... Please note the 1 WEP key as it comes to the security key for the wireless network...

  Click the settings advanced wireless
  Change the interval of tag to 75 > change the Fragmentation threshold to 2304, change the RTS threshold to 2304 > click 'save settings '...
  Now let's see if you can locate your wireless network and try to connect... And check if you are able to navigate.