DW2015 El Capitan GPU Mac FREEZES

Similar Questions

• At my mac freeze because of the virus?

  Hi, I think I have a problem.

  Yesterday, I put my macbook (for the first time in a while) sleep mode before went to bed.

  About 5 hours later, I started my macbook and pop up then came when I clicked on the link on the site that I do not close.

  Then my mac freeze when it tried to load the site pop up.

  The situation was like my mouse pad gel as it was locked.

  I'm freaked out and force shutdown my mac. Then I turned off my wifi router.

  After a minute or two, I turned on my mac and everything was fine.

  I scanned my mac using free antivirus Avira and nothing came out.

  I would like to know if there is a chance that I had viruses, malware or something like that?

  If so, what should I do?

  Thank you very much for your help.

  You can get a look by running etrecheck http://etrecheck.com/

• Mac freezes when I go on facebook

  My Mac freezes when I go on facebook

  Hi there obxbes,

  It seems that all of your computer does that when you go on the FaceBook site. I would start by starting in safe mode, to erase a few caches as well as system-level to perform a disk check and repair if necessary:

  Follow these steps to start in safe mode.

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any keys during startup.

  From: try safe mode if your Mac does not start-up

  If this does not resolve the issue I would like to use then these two articles to fix Safari:

  If Safari does not load a page or a page Web elements are missing

  If Safari is slow, unresponsive, which closes unexpectedly, or has other issues

  Thank you for using communities of Apple Support.

• How can I get my 12 items Editor to open in El Capitan on mac? It signals a problem. As suggested by the Apple support, I've trashed previous preferences and tried to restart, but to no avail. I was told to return to the preferences of the trash and c

  How can I get my 12 items Editor to open in El Capitan on mac? It signals a problem. As suggested by the Apple support, I've trashed previous preferences and tried to restart, but to no avail. They told me to return the trash preferences and contact adobe.

  Adobe has not yet been able to offer suggestions of what-so-ever, aside from telling me that it is there no real person for this product customer support and that I should try this forum. I hope that, apart from the many people with the same problem, there may be even one person out there with a solution!

  I bought the Publisher of 12 elements in March 2015 on the Apple App Store. Apple has confirmed that there is absolutely nothing wrong with my Mac. He has had problems since bought and installed on Yosemite, now the new O.S. El Capitan is installed, and 12 elements editor now refuses to open at all.

  My opinion is that if Adobe and Apple do not provide professional support for the products they sell to us, then they should say at the outset that there is no support for these products. This is not the first time that I was sold an adobe product that doesn't have any product support, product durability or reliability of product.

  If all goes well there's someone out there who can help me!

  Thank you!

  Mr.L.

  Little Giant Productions.

  As you have the version of the App Store, you will need to re - install. Your download should always be available in the Mac App Store under "purchases".

  Apple has had problems with security certificate expired affecting all applications downloaded from the Mac App Store. Here's a solution that worked. Give it a try by following each step:

  I had the same problem on the Mavericks and your suggestion worked for me.  FYI, I deleted the items, empty trash, disconnected from the App Store, restarted the computer, signed in to the App Store, then downloaded items.  I use OS x 10.9.5 and 11 elements.  Hope this helps!

• Mac freezes or crashes with the last update of El Capitan

  I have an old iMac (mid 2007), Mac, but I have never had any problems with it until this last update of OS lock (Version OS X El Capitan 10.11.4, although I have returned to an earlier version recently to prevent locking without result).  I have 4 GB memory 667 MHz DDR2 SDRAM, 2.4 GHz Intel Core 2 Duo CPU graphics ATI Radeon HD 2600 Pro 256 MB.  Usually, I use Safari when this happens. It requires a restart of the hard to get it working again. I also have the Machine backup time, which I returned to an earlier version of the operating system at some point.  In general, the cursor still moves, but does not work no matter what windows or controls, that is why it requires the hard reboot.  The Mac reputation is on the line, since I told my friends of Windows that Mac will last at least a decade before they may need to be replaced, while Windows based computers need replacing every 5 years.  Is that what I can do perfectly well apart from the replacement of this computer?

  1. the present proceedings is a diagnostic test. It doesn't change anything for the better or worse and therefore, by itself, will not solve the problem. But with the help of the results of the tests, the solution may take a few minutes, instead of hours or days.

  The test works on OS X 10.8 ("Mountain Lion") and later versions. I do not recommend running it on older versions of Mac OS X. It will do no harm, but it will not do not much good.

  Do not be put off by the complexity of these instructions. The process is much less complicated than the description. You make the tasks more complicated with the computer all the time.

  2. If you do not already have a current backup, please back up all the data before doing anything else. The backup is needed on the general principle, not because of what anyone in the test procedure. Backup is always a must, and when you encounter any kind of problems with the computer, you can be more than the usual loss of data, if you follow these instructions or risk not.

  There are ways to back up a computer that is not fully functional. Ask if you need advice.

  3 here is instructions to run a UNIX shell script, a type of program. As I wrote above, it doesn't change anything. It does not send or receive data over the network. There is no to generate a report on the State of the computer human readable. This report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents for me or someone else.

  You should ask yourself if you can believe me, and if it is safe to run a program at the request of a foreign national. In general, no, he's not sure, and I encourage it.

  In this case, however, there are ways for you to decide if the program is safe without having to trust me. First of all, you can read it. Unlike an application that download you and click to start, it is transparent, anyone familiar with the code can check what it does.

  You may not be able to understand the script yourself. But variations of it have been posted on this site several times over a period of years. One of the million registered users to have read the script and set off the alarm if it was dangerous. Then I wouldn't be here now, and you would not be reading this message. See, e.g., this discussion.

  However, if you cannot satisfy yourself that these instructions are safe, do not follow them. Ask other solutions.

  4. here is a general summary of what you need to do, if you decide to go forward:

  ☞ Copy text from a particular web page (not this one) to the Clipboard.

  ☞ Paste into the window to another application.

  ☞ Wait for the test to run. It usually takes a few minutes.

  ☞ Stick the results, which will be copied automatically, in a response on this page.

  These are not specific instructions; just a glimpse. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait and paste it again. You don't need to copy a second time.

  5. try to test in conditions that replicate the problem, to the extent possible. For example, if the computer is slow intermittently, run the test during a downturn.

  You may have started up in safe mode. If the system is now in safe mode and works pretty well in normal mode to test run, restart as usual before running it. If you can test only in safe mode, this.

  6. If you have more than one user and a user is affected by the problem, and the user is not an administrator, and then run the test twice: once under the affected user and one administrator. The results can be different. The user that is created automatically on a new computer, when you start it for the first time is an administrator. If you are unable to log in as an administrator, verify that the user concerned. More personal Mac have only one user, and in this case this section does not apply. Don't log in as root.

  7 load the linked web page (the site "Pastebin.") Press the combination of keys command + A to select all the text, then copy it to the Clipboard by pressing command-C.

  8. start the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name ("Terminal") in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing Command + V, then press return. The text that you pasted should disappear immediately.

  9. If you logged in as an administrator, you will be prompted for your login password. Nothing displayed when you type. You won't see the usual points instead of the characters typed. Make sure that caps lock is turned off. Type carefully, and then press return. You can get a warning to be careful. If you make three unsuccessful attempts to enter the password, the test is still running, but it will produce less information. If you do not know the password, or if you prefer not to enter, just press back three times at the password prompt. Yet once again, the script will run.

  If the test takes much longer that usual to run because the computer is very slow, you can be prompted for your password a second time. The permission you grant by entering it will expire automatically after five minutes.

  If you are not logged as an administrator, you will be prompted for a password. The test will run. It just will not do anything that requires administrator privileges.

  10. the test may take a few minutes to run, depending on the number of files you have and the speed of the computer. A computer that is abnormally slow may take more time to run the test. During execution, a series of lines is displayed in the Terminal window like this:

      Test started

          Part 1 of 4 done at: … sec        …        Part 4 of 4 done at: … sec

      The test results are on the Clipboard.

      Please close this window.

  The intervals between the parties will not be exactly the same, but they give an approximate indication of progress.

  Wait for the final message "Please close this window" appear - again, usually within a few minutes. If you don't see this message in about 30 minutes, the test probably won't be completed within a reasonable time. In this case, press the Ctrl + C key combination or the point command to stop it. Then go to the next step. You will have incomplete results, but still something.

  In order to get results, the test should be allowed to perform or be stopped manually as shown above. If you close the window of the Terminal, while the test is still running, the partial results will not be saved.

  11. when the test is completed, or if you manually stopped, leaving the Terminal. The results have been saved to the Clipboard automatically. They do not appear in the Terminal window. Please do not copy from there. All you have to do is start a response to this comment and then paste it again by pressing Command-V.

  At the top of the results, there will be a line that begins with the words «Start time.» If you do not see that, but rather to see a mass of gibberish, you wait for the message "close this window". Please wait and try again.

  If personal information, such as your name or e-mail address, appear in the results, make anonymous before posting. Usually it will be not necessary.

  12. in the validation of the results, you see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the software which manages this website. Thanks for posting the results of the tests on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

  13. When you are finished with the test, it is gone. There is nothing to uninstall or clean.

  14. This is a public forum and others can give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but all that you can not be. For others who choose to run it, I do not recommend that you view the results of test on this Web site unless I ask.

  15. the related UNIX shell script is a notice of copyright. ASC readers can copy for their personal use. The whole nor any part can be redistributed.

• El Capitan slow and freezes.

  Hello

  Since Friday, June 3 of this year my iMac has been regularly making slower with the spinning beachball showing when I open an application and when playing iTunes, YouTube, Vimeo, VLC etc the system just freezes then starts again normally. I ran Intego Internet Security, run CleanMy Mac but also run the same Washing Machine, Intgeo reinstalled El Capitan, but its still slow and freezes. Also, the activity running monitor did not throw all the problems.

  No software has been downloaded or installed until this happened, just from appeared Friday and has gradually deteriorated since.  I bought the iMac in 2012 and its been a joy full every day since then. Even that by typing the text in the screen freezes then the rest of the sentence make it up a few seconds later. Also scroll, left and right mouse click can take up to 25 seconds to work, even if the mouse works no problem, if that's any help.

  My system is:

  iMac 27 inches (mid 2011)

  3.1 Ghz Inel Core i5

  16 GB at 1333 Mhz RAM

  1 TB HHD

  OS X Version of El Capitan 10.11.5

  Any assistance here for me would be really appreciated.

  First of all, get rid of all the software Intego and CleanMyMac.  They are not necessary and can only add to the problem of slow system and applications.  Do a Google search to find the developer instructions to uninstall.

  Also download and run Etrecheck.  Copy and paste the results in your response. Etrecheck is a diagnostic tool that has been developed by one of the most respected users here (and recommended by Apple's Support personnel) of the CSA to provide a snapshot of the system and help identify the most obvious culprits that can adversely affect the performance of a Mac.

  

• Since the upgrade to El Capitan, my Mac is VERY slow.

  I just have to upgrade Yosemite El Capitan.  Since the upgrade, my Mac is VERY slow.  Spend a lot of time with the spinning beach ball, and slow to change application.

  Why?  What should do?

  Download and run EtreCheck, created by one of his own assistants here in CSA. It is a diagnostic tool that is very useful for us to find problems. It will also give us additional specifications on your Mac. After his execution after the logfile here. It will never contain any personal information.

• No WiFi after fresh El Capitan of Mac Pro 4.1 install

  I had my second hand Mac Pro 4.1 today and did a fresh install of El Capitan.

  Now I can't connect to my WiFi because there is not WiFi Interface. I already have a VRAM and resetting the SMC.

  Is it possible to get my WiFi working? Should I try a new installation of a lower version of Mac OS and then upgrade to El Capitan?

  Thanks for your help

  A wifi card?

  When I bought a used 2009 MP no wifi card has been installed.

• Resolution of the problems of El Capitan and Mac Pro GT 120?

  When El Capitan came out, I've updated my Mac Pro 4.1 which has three screens on three GT 120 s.  It was a disaster.  I need three screens and buy new maps for El Capitan is illogical.  Can someone tell me if this has been resolved now?

  Yes, the logging problem with several graphics cards has been resolved in 10.11.3 or perhaps a little earlier.

• Mac freezes without specific action

  My Macbook freezed 2 times in 5-10 minutes. I have a Macbook Pro retina 13 "early 2015 under OS X 10.11.4

  I didn't have specific action that every time it happened just a few casual chatting on Facebook. The screen freezes the cursor didn't move and the mac has failed to force quit. I had to hold the power button until it stops and restart.

  The ides, what could be the problem?

  Difficult to say exactly what is the cause of the gel but if you download and run EtreCheck and then display the results in your response that would give us an idea of could be the cause of the problem.

  https://etrecheck.com

  No personal data is shared from an EtreCheck report.

• Since going to El Capitan, my Mac Mini makes me want to cry

  Operating system: OS x El Capitan 10.11.3 (15 d 21)

  Hardware: Mac mini (end of 2012), 2.5 GHz Intel Core i5, 8 GB 1600 MHz DDR3, Intel HD 4000 1536 MB graphics card

  Experience: the worst!

  Since El Capitan installation my Mac has become a nightmare. EACH click generates a spinning beachball. Adobe products are DRAGGING. I mean, come on-do-a-"sandwich" - slow to load. Connection to the Internet - WAIT.

  And now, since installing the 10.11.3 patch, my mouse Logitech M570 clever is bug (even after installing the latest drivers!).

  My daily work has slowed to a crawl, and I'm afraid to do on the computer every day. Back to Yosemite is out because there is no Time Machine backup.

  Thank you, Apple!

  It is not for lack of Apple.

  Try these in order to test your system after each see if it is back to normal:

  1. a. reset the PRAM and NVRAM on your Mac.

  b. Macs with Intel processors: reset of the controller (SMC) system management

  2. restart the computer in Safe Mode, and then restart again, normally. If this does not help, then:

  HD recovery start: restart the computer and after the buzzer, press on and press and hold the

  COMMAND and R keys until it appears the Utilities menu screen.

  3 fix the hard disk and permissions: select startup drive in the Utilities menu utility. Fix the hard drive and the permissions as follows.

      When the recovery menu appears, select disk utility and press the continue button. After loading disk utility select it

      back from Macintosh HD entry of the list on the left.  Click first aid button in the toolbar. Wait for the operation

      ends, then quit disk utility and back to the main menu.

  4 reinstall OS X: restart from HD recovery Select reinstall OS X from the Utilities menu, then click on the continue button.

  Note : You will need an active Internet connection. I suggest to use Ethernet if possible because it's three times faster than wireless.

  
  

• El Capitan for Mac Pro 1.1?

  Can I upgrade my 1.1 Pro Mac OS x 10.6.8 El Capitan?

  Lol you need a Mac Pro (Early 2008 or newer).

• FCPX El Capitan new Mac Pro SLOW

  I just add a new computer to our edit arsenal. It's a Mac Pro 2.7ghz - 12 CORE - 30 MB L3 cache - with 64 GB of DDR3 - 1 TB of Flash storage memory - Dual AMD over-pants D700 6 GB VRAM - essentially the full load Mac Pro.  10.2.2 FCPX running

  Why my not make happen almost instantly?  I put in back made in 0.3 seconds.  It seems to me with all this power - this thing has absolutely scream - and yet I don't see a significant difference between the calculation of my MacBook MONOCŒUR i7 with 16 GB DDR and this monster.  My MacBOOK works always - Yosemite, but my new computer came with El Capitan.  I was able to get this added to our budget by telling our Board of how long it would save.  $10,000 for a computer, it must blow my mind. It's also take about a full minute to FCPX bring up a project when I start.

  With rendered BG set this short interval of time. you have tapped on the brakes in FCP constantly. (This isn't actually rendered BG; he makes during periods of inactivity.). My suggestion would be to turn it off. With this kind of horses, you shouldn't make except for the more complex compositions. Or if you need to before export.

  If turn off made does not improve things a bit, I begin to wonder about the project - if there was something on the media - or an effect that was driving the MP to madness. Something like the reduction of the noise applied to a long clip really bind any machine in knots.

  Russ

• I have 5 of lightroom, but I am unable to attach my nikon D600 with El Capitan on mac pro book

  I just bought a mac book pro for the attachment, but I can't use this feature with Lightroom 5 operating sys is El Capitan. If anyone has a solution or work around, it will be very appreciated.

  EAN

  Ean Hello,

  If you have a Nikon Lightroom 5 camera will not be able to attach on El Capitan.

  If you switch to Lightroom 6, Lightroom CC 2015.

  Kind regards

  Tanuj

• 6.3 Lightroom (Mac) freezes when importing

  Hi all

  Due the fact that Apple has stopped development of opening I had to do a switch after several years of feeling 100% comfortable with an opening. After some research, it became clear that most of the people would recommend Lightroom. So I bought a copy.

  Import of my opening book is very well and included all my projects and notes (very important!). So far so good.

  Now, I tried to import photos newly shot of my Nikon D7100. Tried with the cable. Tried with the SC card in my Macbook Air. Lightroom still freezes when importing or is back with the 'message' that none of the pictures could be read.

  Returned to the opening. Connected to the camera. Quick import and 100% OK.

  I can't believe that Adobe releases a new version with such a major problem... Very frustrating... want my money back!

  Can anyone help? Is that a known issue - the fixes proposed in the forums don't work not (import options)? Will there be an update to Lightroom soon?

  Thank you!

  Config:

  -Macbook Air 2012, 1, 7GHz Intel Core i5, 4 GB RAM, 480 GB SSD Jetdrive (45 GB free event with library, Aperture and Lightroom to 150 GB each)

  -Mac OS 10.11.2

  -Adobe Lightroom 6.3

  Yes, please try to import images to another location.

  Also, make sure that you have read and write access on the location where you import the images.