DX6120 mt mobo swap

Similar Questions

• (Redirected) Alienware X 51 MOBO swap help!

  I recently switched on the motherboard on my x 51(mobo died and I am out of warranty.) I found one on ebay and swapped out motherboard). I am trying to reinstall windows, and I'm having trouble. It won't let me install the operating system or repartition the hard drive. I can't get into the bios. I am also able to start the installation of windows, but met obstacle with the pre-existing partitions. Any help would be greatly appreciated. Thank you

  Better in this position in the Alienware owners Club Forum, here:

  http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

  Bev.

• T440s: Accidentally disabled Intel AMT permanently

  Nice day

  on a T440s I permanently disabled Intel AMT by accident. According to HMM, I can't reactivate this option: in addition to a mobo swap: is it possible to restore this option (perhaps through reset cmos)?

  Kind regards

  cdeibert

  Information is stored in EEPROM, no necessary additional response: case closed.

• Swap the motherboard for the section previously acer m5910 / how to Exchange win7 for this mobo HELP NEEDED

  IM about to exchange the new motherboard with chipset intel my m5910 system. I have not install win 7 dvd with my purchase in 2011, it seems to be built in. I have win 7 Home premium product... always on my case and acer s/n + snid number too.

  Only the DVD that I found are 3 dvd - r and it is written: empty recovery DVDs, I checked and all 3 are filled with data.

  When I swap card mother how can I use THIS win7 operating system in my new motherboard?

  If your Windows supplied with your Acer computer, then your Windows is an OEM version and not the retail version. My suggestion will probably not work, but you can always try. Worst case, it's that you have purchase a retail version of Windows from any store.

  If you are patient, wait for Windows 10 is released. You might be able to work around the problem of it being related to the motherboard, or at least 10 Windows can be cheaper to buy retail (I am purely speculating).

  If you don't have the extra money right now to buy a new copy of Windows, then please don't follow my suggestion. My suggestion in the previous post probably will not work because you OEM of windows, but it's just something I want to try it personally.

• The dimensions on the mobo MTQ45MK need, ThinkCentre M58P desktop computer

  All - beginners, glancing a ThinkCentre M58P, not the SFF desktop computer, with MTQ45MK mobo and my understanding is that there mATX mobo, but I need the dimensions because it may wind up in a different chassis until this project is completed. I think they call this Panda Board. Thank you

  Bob87

  Receive my eBay system, dimensions on the mobo are 9.6 x 9.6, which is the larger of the two form factors card mother mATX. It makes sense, since it is so complete. I will detail my swap of the system in another forum,

  Bob87

• Compaq Presario CQ57-339wm: I can swap different CPU into a model motherboard Celeron?

  Hey all,.

  I have a laptop Compaq Presario CQ57-339wm requiring a logic board replacement. According to the sticker on the Palm, it has an Intel Celeron processor clocked to Interior.

  According to the CQ57, the motherboard service manual I ordered (reference number: 646177-001) is "for use only with the computer models equipped with an Intel Core i5 or i3 processor processor and a graphics subsystem with UMA video memory.

  Since I have a Celeron CPU and motherboard instead, would replace this motherboard for the work of the Board of Directors i5? I think that the mobo, I ordered does not include a processor i5, just the current Board. I could swap the chip Celeron of the old Council to the Board of Directors i5, or that wouldn't work either? I have to install a compatible rod that matches the part number of the old mobo? (646174 001).

  If it won't work, I return to the Commission, as I have not yet opened and order a compatible card. Moreover, if the installation of the Board of Directors will work, and I just need the compatible CPU, I could order one that would correspond to the reference, like this eBay i3.

  "Violence is the last refuge of the incompetent." -Issac Asimov, from its roman Foundation.

  I think that you understood. The Celeron and Core Intel models use a different motherboard with a different chipset and processors cannot be exchanged.

• Activation after damaged MoBo

  Hello I have a used Dell (after the lease).  I used real app since I got this. No problems.

  Around the CPU caps are bulging.

  For I put the hard drive in another case and used it for three days.

  I got a 'replacement motherboard' (no upgrade). Reused CPU + memory + HD

  Swapped the MoBos and can't reactivate. I think MS phone Activation said that Installation ID is bad.

  Here is my list:

  Diagnostic report (1.9.0027.0):

  -----------------------------------------

  Validation of Windows data-->

  Validation code: 50

  Code of Validation caching online: 0x0

  Windows product key: *-* - 6CCTH - V78GX-TM8CF

  Windows Product Key hash: 70iGHvwIqPQAlMH4H3IK/Flz4o0 =

  Windows product ID: 00359-030-7077095-85460

  Windows product ID type: 5

  Windows license type: retail

  The Windows OS version: 6.1.7601.2.00010300.1.0.003

  ID: {A98EA43D-EF31-439A-974E-82F3078D39DF} (1)

  Admin: Yes

  TestCab: 0x0

  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002

  Signed by: n/a, hr = 0 x 80070002

  Product name: Windows 7 Home Premium

  Architecture: 0x00000000

  Build lab: 7601.win7sp1_gdr.140303 - 2144

  TTS error:

  Validation of diagnosis:

  Resolution state: n/a

  Given Vista WgaER-->

  ThreatID (s): n/a, hr = 0 x 80070002

  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->

  Cached result: n/a, hr = 0 x 80070002

  File: No.

  Version: N/a, hr = 0 x 80070002

  WgaTray.exe signed by: n/a, hr = 0 x 80070002

  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->

  Cached result: n/a, hr = 0 x 80070002

  Version: N/a, hr = 0 x 80070002

  OGAExec.exe signed by: n/a, hr = 0 x 80070002

  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->

  Office status: 100 authentic

  Microsoft Office SharePoint Designer 2007 - 100 authentic

  Microsoft Office Enterprise 2007 - 100 authentic

  OGA Version: N/a, 0 x 80070002

  Signed by: n/a, hr = 0 x 80070002

  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005_E2AD56EA-765-b01a_E2AD56EA-766-0_E2AD56EA-148-80004005_16E0B333-89-80004005_B4D0AA8B-1029-80004005

  Data browser-->

  Proxy settings: N/A

  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)

  Default browser: C:\Program Files\Mozilla Firefox\firefox.exe

  Download signed ActiveX controls: fast

  Download unsigned ActiveX controls: disabled

  Run ActiveX controls and plug-ins: allowed

  Initialize and script ActiveX controls not marked as safe: disabled

  Allow the Internet Explorer Webbrowser control scripts: disabled

  Active scripting: allowed

  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->

  Office details: {A98EA43D-EF31-439A-974E-82F3078D39DF}1.9.0027.06.1.7601.2.00010300.1.0.003x 32*-*-*-*-TM8CF00359-030-7077095-854605S-1-5-21-4115608993-4087241107-3587228866Dell Inc.                OptiPlex 745 Dell Inc.                2.3.1 20070521000000.000000 + 0003AB50E00018400FA04090409Eastern Standard Time(GMT-05:00)03DELL B8K 100100Microsoft Office SharePoint Designer 200712BC1F9C0EFD8C580IZci4eEnvIopCJGPznem4WFgFY4 =89394-704-4560015-6324314100Microsoft Office Enterprise 2007127480B9502DF0D86oYWOW5ayFE3pZ jvTpuXYsY64JE plus89388-707-8722531-6515114

  Content Spsys.log: 0 x 80070002

  License data-->

  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 HomePremium edition

  Description: operating system Windows - Windows (r) 7, retail channel

  Activation ID: 2e7d060d-4714-40f2-9896-1e4f15b612ad

  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f

  Extended PID: 00359-00170-030-707709-01-1033-7600.0000-1912012

  Installation ID: 001392178746133153029156407420475345972015357091663536

  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338

  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339

  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341

  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340

  Partial product key: TM8CF

  License status: Notification

  Reason for the notification: 0xC004F00F.

  Remaining Windows rearm count: 4

  Trust time: 08/10/2014-19:51:20

  Windows Activation Technologies-->

  HrOffline: 0x00000000

  HrOnline: 0x00000000

  Beyond: 0 x 0000000000000000

  Event timestamp: 8:18:2014 04:06

  ActiveX: Registered, Version: 7.1.7600.16395

  The admin service: recorded, Version: 7.1.7600.16395

  Output beyond bitmask:

  --> HWID data

  Current Hash HWID: LgAAAAAAAwABAAIAAAABAAAAAQABAAEAJJQ2ky73Tmu2hlR5sP9mKkI9yCEqhQ ==

  Activation 1.0 data OEM-->

  N/A

  Activation 2.0 data OEM-->

  BIOS valid for OA 2.0: Yes

  Windows marker version: 0x0

  OEMID and OEMTableID consistent: Yes

  BIOS information:

  ACPI Table name OEMID value OEMTableID value

  REFERENCE DELL APIC B8K

  FACP DELL B8K

  HPET DELL B8K

  STARTING DELL B8K

  MCFG DELL B8K

  SSDT DELL st_ex

  ASF!                   REFERENCE DELL B8K

  TCPA DELL B8K

  B8K DELL SLIC

  Thank you for your time and your help.

  I think when you move the disk temporarily to the other PC you messed up the Windows installation.

  You must perform a new installation and activate Windows on the new motherboard.

  You can try the following, but no guarantees, but 1 control device manager you may need to install / reinstall drivers for devices (including the chipset driver).

  If the device look OK then try the following:

  Open a prompt (run as administrator) and enter:

  slmgr - upk and press the enter"" key.

  slmgr - ipk XXXXX-XXXXX-XXXXX-XXXXX-XXXXX (XXXXX is your product key) and press the Enter key)

  slmgr - ato and press the 'Enter' key to activate Windows (your Internet connection should work).

  J W Stuart: http://www.pagestart.com

• Sierra: key control and command swap?

  Hi all

  I use the option to swap the keys of my command and control, but it does not work on my 5 k new Imac. It did not work in El Capitan. I have already reset the NVRAM but no luck, the control keys keep order and even for my control keys. Bug?

  

  Kind regards

  Peter

  Thank you for using communities of support from Apple, PeterWeter!

  Congratulations on your new iMac! I see that your iMac on macOS Sierra is not allowing you to change your key options. Since I have been hit most of my adult life, is not able to use any key how I need you would slow me down.  I'll be happy to help you.

  Try safe mode if your Mac does not start -boot in safe mode is a great way to make sure that everything starts correctly.

  What is safe mode?

  Safe mode (sometimes called secure boot) is a way to start up your Mac so that it performs certain checks and prevents certain software from loading automatically or opening. From your Mac in safe mode does the following:

  • Check your startup disk and attempts to fix problems if necessary directory
  • Loads needed kernel extensions only
  • Prevents elements start and the login items open automatically
  • Disables the user installed fonts
  • Delete font caches, hiding the kernel and other files of the system cache

  Once your iMac starts up in safe mode, you should be able to define the keys on your keyboard as you want.

  See you soon!

• Swap the menu bookmarks with the Bookmarks button 'star'.

  There are a lot of answers there to get rid of the star on the new Favorites menu button button, and I share their frustration. However, my complaint is that I don't like the star button on the left of the double button. Is there a a way to replace the star key and the menu buttons drop down? To clarify, I want to keep the double button, but I want the button drop-down menu on the left and the star key 'Bookmark this Page' on the right.

  Here is a picture also help clarify what I'm looking to move.

  http://imgur.com/CfQrJ6o

  I appreciate any help you can offer!

  It is not possible in a simple way.
  Are not two buttons, but a single button, and the star is the main button and the other button is the drop marker as you can see if you inspect the code with the DOM Inspector.

  This drop marker also has a border or box-shadow on the left, so you should have to do a lot of CSS changes to make this work correctly.

  The two swapping is easy with the code to userChrome.css:

  @namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
  
  #bookmarks-menu-button > dropmarker {-moz-box-ordinal-group: 0 !important;}
  

  The file userChrome.css (UI) customization and userContent.css (Web sites) are located in the folder of chrome in the Firefox profile folder.

  • http://KB.mozillazine.org/Editing_configuration

• My macbook air keeps building a list of swap file 1.1 GB of files that I have to remove... .because my hd gets stuck. How to stop and cause? Please

  This is what it looks like after the removal of all but the swapfile53... (I deleted swapfile1-52) each 1.1 GB

  It is excessive swapping of data between physical memory (that is, tokens of memory on the logic board) and virtual memory (one or more files on the boot volume.) This activity is relatively slow and causes the entire system to be less sensitive. It can happen for two reasons:

  A process of long duration with a memory leak (a kind of bug)

  Not enough memory for your usage pattern

  Please note that if the cause is a memory leak, install more memory will not help. It's likely you have already more than 4 GB of memory. Hunt for leaking memory can be difficult, and it may come down to a process of elimination.

  These instructions are for OS X 10.9 and later versions. Some details may be slightly different for earlier versions of Mac OS X.

  When you notice the slowdown, open the activity monitor application, then select all processes in the view menu, if it is not already selected. Select the memory the real Mem of the treatment twice table column header to sort the table with the highest value at the top. If you do not see this column, select

  View ▹ columns ▹ real memory

  in the menu bar.

  If a process (excluding the "kernel_task") uses a lot more memory than all the others, which could be an indication of a leak. A better indication would be a process that constantly catches real more memory over time without ever letting go. Here is an example of how it's done.

  "Wired" memory should be less than half of the total. That memory is not exchanged, but makes available physical memory that you may then in Exchange. If most of the memory is wired, which can be an indication of a leak memory in a third-party program that modifies the low-level operating system. Ask for advice in this case.

  If you do not have a clear memory leak, the options are to install more memory (not possible with a MacBook Air) or less than programs running concurrently.

  The following suggestion is reserved for users familiar with the shell. For a more accurate, but potentially misleading test, run the following command:

  sudo leaks -nocontext -nostacks process | grep total

  where process is the name of a process, you think of a memory leak. Almost every process will cause a memory leak. the question is how, and especially how the leakage increases with time. I can't be more specific. See the manual page leaks (1) and the Apple Developer documentation for more details.

• How to re activate memory swap?

  "I have disabled memory swap for purposes of test with the command sudo nvram boot-args =" vm_compressor = 1"I tried it reactivation with sudo nvram boot-args =" vm_compressor = 4 ' but it is not working, everyone knows what to do?

  How to reset the NVRAM on your Mac - Apple Support

• P7-1297cb: replaced mobo and now sp56617 error 9996 unresponsive system requirements - no lan internal ethernet

  My mobo going bad and with the replacement(no product #) but Council matches up to visually(ms-7778) not charging not drivers SP56617 - controller network Atheros Original (error 9999) driver does not meet the system requirements?

  This driver is loaded on the card that I replaced it.   Is this a bad mobo?   Is there a setting that has changed needs BIOS?

  The wireless seems to be connected and functional, (I forgot my password-never use wireless), but no internet ethernet?

  Is there a solution > get another mobo... put updated the driver... the bios setting?

  I don't think so.

  Download and install this free utility for files.

  The 2nd listed file is 64-bit.

  http://www.7-zip.org/

  Then download and save, but do not run the ethernet driver from the support page of your PC.

  This package provides the original driver for Atheros Ethernet Controller solutions in the supported models that are running a supported operating system.

  File name: sp56617.exe

  Right click on the ethernet atheros driver you downloaded and select 7 - zip from the list of items.

  Have 7-Zip extract of: and let it extract the file in the file name (sp56617).

  Go to Device Manager and click on the ethernet controller needing drivers.

  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software option and browse to your folder of driver that 7-zip created.

  Make sure that the include subfolders is selected and see if the pilot goes like this.

• Swap HDD PSAAQE Equium A100 - 01 M - would be Crucial M4 work SATA III SSD 64 GB?

  I have a friend in a bit of a State with their incredibly slow laptop; I have a spare old M4 of Crucial 64GB SATA and a couple of hours free in the morning. I said I would try to help and my plan is to swap the drives.

  I see from the [Manual | http://www.toshiba.co.uk/innovation/tracker.jsp?file=http%3a%2f%2fsupport1.toshiba-tro.de%2ftedd-files2%2f0%2fuserman-en-20090212142351.zip] that there is a recovery partition.

  I have one of these USB to SATA led and I really was hoping if someone could let me know something that Googling it has not revealed so far that is:

  1: what SATA is this laptop? Is it 1 or 2? This player works on it?
  2: what is the best method to copy the current structure of disk and partition? Preferably leaving the data not copied partition as this will be a full recovery.

  Is that all I need to know?
  Sorry if this IS answered elsewhere, but I have 2 hours to do, I do it for free, and I just googled this morning already.

  Thank you!

  Hello

  > 1: what SATA is this laptop? Is it 1 or 2?

  As much as I know the satellite and the Satellite A100 supports SATA I controller.
  The two series are the same.

  > This disc will work on it?
  Well, since the SATA standard is backward compatible, the SSD should work but with lower performance.

  > 2: what is the best method to copy the current structure of disk and partition?
  There are different options. You can use the Toshiba Recovery disk to reinstall the system on the SSD drive. Personal data (documents, pictures, mp3, etc.) could be copied to a USB flash to move disk of the SDS.

  You can also create an image of your partitions and after installing the SSD drive, you can use the image file to recover partitions

  In some cases, manufacturers of SSDS provides tools/software specific to a product such procedure too.

• Can I swap the SIM card from my iPhone more current 6s, back with a new iPhone free sim SE?

  Can I swap the SIM card from my iPhone more current 6s, back with a new iPhone free sim SE?

  The reason that I ask is that I would like to use the iPhone OS at work, and the rest of the time using my iPhone more than 6 s.

  Hello

  Yes, it should work ok with the same identifier apple for iphones.

  See you soon

  Brian

• Satellite Pro 4600 MoBo model

  Hi guys,.

  I have a Toshiba Satellite Pro 4600 PIII900/128 / 20G / 14 t/D/LM/W (it is written on the sticker under the portable) MODEL No.. PS460E-04NVW which MoBo should I do? Mine is broken, so I want to buy one on eBay, but I don't know what model is right.

  THX,
  Davide

  PS: Sorry for my bad English again. I'm Italian... :)

  Thanks for this info!