dx7300: after processor upgrade system uses no multipliers again
Today I updated my PC (dx7300 mt) with the new c2d E6600 processor (so far I've been using c2d E6300).
BIOS has also recognized new processor, Windows, CPU - z, the new processor is recognized correctly with multipliers x 6 to x 9 (previously my E6300 could use x 6 x 7-1600 MHz and 1860 MHz).
Unfortunately, even if I launch a benchmark or fullHD x 265 video multiplier never exceeds 7 x, even if it means that some of the images are lost.
The parameters of battery in Win10 seems OK.
There is no problem of overheating, max temp 30 c
Should I change the BIOS somehow? I've upgraded to the latest version, including the upgrade of the firmware.
Best regards
lbajon
OK, after a few reboots more it started working!
the problem is resolved.
I don't know if necessary for the installation of sth Windows or the problem was with something else...
Tags: HP Desktops
Similar Questions
-
Any ideas?
I get this error not supported when I try to access the Ext data tab on a specification of printed packaging.
Exceptions: System.Web.HttpUnhandledException: Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> System.ArgumentException: Type identity 2121 invalid parameter name: typeId in Xeno.Prodika.ExtendedAttributeSections.Service.SectionOrderComparer... ctor (typeId Int32) at Xeno.Prodika.ExtendedAttributeSections.Service.ExtendedAttributeSectionInstanceService.get_SortedSectionInstances () at Xeno.Web.UI.Common.Controls.EASectionControls.EASectionContainer.BuildSectionInstanceControls () at Xeno.Web.UI.Common.Controls.EASectionControls.EASectionContainer.AttachSectionInstances () at Xeno.Web.UI.Common.Controls.EASectionControls.EASectionContainer.DataBind () at Xeno.Web.UI.Common.Utils.CommonExtAttrCustomSectionInitializer.InitializeCustomSections (Boolean isInEditMode object sectionContainer, Boolean shouldRender, Boolean hasRenderBefore, Boolean isRefresh) prodika. ExtendedAttributeSectionUIAdapter.InitializeExtendedData (DownLevelMultiPage multiPage, spec IBaseSpec, String eAPropertyName, Boolean isRefresh) at prodika.frmFinishedPackaging.SetupExtendedData (Boolean isRefresh) to prodika. XManagedSpecBaseForm.OnLoad (ByVal e As EventArgs) at System.Web.UI.Control.LoadRecursive () at System.Web.UI.Page.ProcessRequestMain (Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)---end of inner exception stack trace---at System.Web.UI.Page.HandleError (Exception e) at System.Web.UI.Page.ProcessRequestMain (Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest (Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest () at System.Web.UI.Page.ProcessRequest (HttpContext context) at ASP.baseforms_frmfinishedpackaging_aspx. ProcessRequest (HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute () at System.Web.HttpApplication.ExecuteStep (IExecutionStep step, Boolean & completedSynchronously)
It was a response to it?
It seems that the lookupservicemanager is fine; in my system, it's the commonlookups that have been disabled for a specification of packaging printed in the categories ' available in ' and 'ExtendedAttributeSectionAvailableIn '. I don't remember if Oracle has a Publisher to search for common information, so I used a SQL statement to reactivate these two searches. Do not forget to save your dB (or to all least the table commonlookups), run the script below, and then either rinse your unit of cache data admin (which should include research) or bounce GSM. These steps fix the problem in my system.
UPDATE commonlookups SET status = 1 WHERE name = "Print Packaging Specification" and category
IN ('AvailableIn', 'ExtendedAttributeSectionAvailableIn')
-
After the upgrade to vista sp2, about 8 GB of sbace is missing? I run diskcleanup. Y at - it something like windows7 "clean system files" for Vista?
Hello
see if this program helps you to determine what is take up space
http://www.Jam-software.com/treesize_personal/
by default system restore will have up to 15% of the capacity of the hard disk
you would like to reduce this amount
http://www.Vistax64.com/tutorials/76227-system-restore-disk-space.html
http://www.vista4beginners.com/system-restore-space-used
also use disk cleanup
http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup
The other Options tab is available when you choose to clean up the files of all users on the computer. This tab includes two additional ways to free disk space even more:
Programs and features. Open programs and features in Control Panel, where you can uninstall programs you no longer use. The column size in programs and features shows how much disk space each program uses.
System Restore and shadow copies. Guests delete you all but the most recent restore point on the disc.
also scan for malware
Download update and scan with the free version of malwarebytes anti-malware
http://www.Malwarebytes.org/MBAM.php
and read these information from microsoft on windows optimization
http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance
-
Unable to activate Windows 7 Pro after the upgrade of the system
Old Config: Celeron / 2 GB / 40 GB. -Win7Pro retail trade / retail Office10H & B
New Config: i3 / 2GB / 500GB. -Win7Pro retail trade / retail Office10H & B
Windows worked perfect (but slow). I have updated the comp & installed fresh from the same media. Old hard drive is formatted. Office activated. but windows gives the error "the product key you entered cannot be used to activate windows on this computer". I tried the online activation & the phone activation. for only informed 10 days for activation. Help, please.
Try the phone activation once again:
How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
(6) explain your problem clearly to the support person.
http://support.Microsoft.com/kb/950929/en-usIf this does not work, try direct telephone activation:
Direct activation number: (888) 725-1047
1-800-936-5700
If the copy of Windows 7 that you installed an upgrade, please note the following:
However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.
15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.
So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.
-
to ask my serial number for Adobe After Effects upgrade to 64-bit system
I have AE cs6 and I need to upgrade to 64-bit system.
How and where to apply my serial number for Adobe After Effects upgrade to a compatible 64-bit OS? (because no customer service said to me)
You try to open a file created in after effects CC on the use of CS6. Will not work. Never did. You will need to have someone open the project in the CC and do a Save As CS6. Simple as that.
-
Redownloading Photoshop Elements after the operating system upgrade
I plan on the Mac operating system upgrade and worry by the Photoshop Elements software I bought. I bought it as a digital download from Adobe, and she is saved under my ID code Adobe After I upgraded my operating system, can I use my current product serial number to reinstall items? I'm afraid that when I update, I could lose some of the software then I control everything before going through with it. I know that some companies allow you to use the numbers series/product once, and I don't want to have to buy again. Any advice/confimation I may or may not do this would be very appreciated
Hi Jobbers83,
Please disable your software by clicking Help > deactivate and then uninstall photoshop elements.
Then you can download photoshop elements and install on your system with the same serial number.
Thank you
-
Toshiba 32TL838: flicker after fw upgraded in the menus, using HDMI input
Hello
yesterday I updated firmware of my 32TL838 to version 6.4.0Y.1 / 94.6.27.8 using the upgrade feature network.
After the upgrade, I reset the TV to start again with the factory settings.
During the quick installation after the reset, I noticed a very bad video quality. The entire image flickered, had a ghost effect and looked at interlaced. The menus were almost illegible.
Once the installation is complete, the TV switched TV (cable DTV) normal mode and at least the TV picture looked quite normal. While the input CABLE is selected, I can also open menus as before, they are displayed correctly.
But as soon as I switch to the HDMI input, the image becomes nuts once again, just like during the initial installation, including recoveries of TV menu. Sometimes it becomes stable for maybe 30 seconds, but then he is paralyzed again.
A few words about my setup: TV uses only input HDMI 1 and the cable entry, nothing else is connected.
Links to HDMI input to a receiver Onkyo TX - SR508 AV which is powered by a Fantec 3DS4600 media player and the Blu - Ray BDP - S373 player.Because I expect the question of what-to-your-HDMI-wiring, I traded the HDMI cables but as expected which has not helped at all.
At least, I seem to be successful by bypassing the problem when you use the Fantec drive.
Before I updated the firmware, I was able to use the drive with 1080 p/60 Hz and the player has been installed as a result.
Now I switched to 1080 p / 50 Hz, and the video image seems OK again. (However, I made a short test and as I said, sometimes_
the image is OK for a short period).Unfortunately my BluRay player has no menu to change the frequency, so I watch BluRay or online services, the player offers, is impossible.
So, what can I do now? A downgrade of firmware (if possible) would be a quick temporary workaround I could accept. But medium-term I'm expecting Toshiba to restore functionality that they promoted and for which I paid.
(Youtube stopped working with the old firmware and it seems that 1080 p/60 Hz no longer works with the latest firmware).Anyone know how to downgrade the firmware using a USB? I already downloaded the previuos version tl838_853886.bin but I do not have a nail how (and if) it can be installed.
Thanks for your advice
BELEKTROHello
As far as I know the isn t possible downgrade firmware.
But you said that you noticed this problem by using an external device connected to the HDMI 1 port.
As far as I know the Toshiba 32TL838 supports 4 HDMI ports.
I recommend you to check all of the 4 HDMI ports as well as to check all device configuration options.Check for example the rate of active movement + option available.
This option allows to improve the rate of cooling of a TV -
After having upgraded from 12 to 14 of the elements now remove 12 of my mac, and if so do I need any special software. Note that I also use lightroom 5.
Thank you
Just uninstall what you would like to uninstall all of the software on a Mac:
-
Code 150:30 after having to recreate my SYSTEM using Apple time
Hello
I had to restore my entire system using Apple Time Machine, after problems with the printer and Scanner Control Panel. (I'm under El Captain version 10.11.3).) After completing the restoration I can no longer launch Photoshop CS4, Illustrator CS4 or InDesign CS4 Ser # 1327-***-***-***-***-*** [Serial key removed by Mod]. What should I do to get my license working again? I'm just reached by an error message and the code 150:30. I am on a tight work schedule and need to access my emergency license.
Thanks for the help!
Best regards
Ingvar Ericson
The problem is that CS4 licenses is broken in species migrated or restored from Time Machine.
There are two answers to this problem.
Reinstall CS4 including all updates.
Or if you don't mind using Terminal.app and run the script in recovery of the license, the problem can be solved on the spot.
Here is the guide step by step screenshot for it. Start the 11 message and read it through carefully.
-
Hello.
Some panic here.
After the upgrade using VMware-viewconnectionserver-x86_64 - 6.0.0 - 1884746, I can't edit the AutomatedDedicatedComposerPool
I get internal error View Composer. Contact your administrator.
Help, please.
Best regards
Peter
Hmm
Apparently available allow was to be done by right-clicking in the pool and enable provisioning on the Provisioning... tab. Not on the status button in the overview of Ddesktop pools.
Dang.
Best regards
Peter
-
Trouble using Photoshop cs 5.5 after the upgrade to Yosemite?
I've recently upgraded to Yosemite and put in a new HD on my Macbook Pro. The rest of my Production Premium CS 5.5 works, with the exception of Photoshop. It opens, even did some things, but its features are very limited, can't do the simplest things such as changing the text of a layer. Ideas?
Hi J L_447,
You did you a new Photoshop CS5.5 installation after the upgrade to Yosemite?
suggest you do a reinstall via this link:
-
Missing graphics drivers after the upgrade to Windows 8?
Hey guys,.
I see several people on the forums of the problems with graphics drivers not installed after the upgrade to Windows 8.The first step you want to take, make sure that the laptop is supported by Windows 8.
You can go HERE and see if your laptop has been tested for Windows 8. If she's GREAT!
Now, if you're still looking for the graphics drivers according to the processor you have there are several places to look.
First of all, you want to check the HP website and your product type # in the next selection > and then select the operating system > click Next > and look under the section that says "Driver - Graphic" and start the download.
If you still don't see the driver referred to in this article, you can see one of these sites according to what processor you have.Also, if you have Windows 7, you can still follow this post.
THX
I hope it's useful!
THX
-
After the upgrade of windows (Pinball) 10, when working in Lightroom adjustment brush is not making changes, it is there but it does not work. Also several times when I go to the library to develop fashionable mode, programs stops. I am really frustrated. Help, please.
Also several times when I go to the library to develop fashionable mode, programs stops.
It is often a symptom of an incompatibility between LR and your video card. If the other suggestions don't help you, go to System Preferences > performance and uncheck use Graphics Processor.
-
Dimension 4700 choice of processor upgrade
Hi all
Need some advice on the processor upgrade choices for a Dimension 4700 with a Pentium 4. I mainly use this machine to launch Cubase 4.5, and an Emu Proteus system and I am running up to the limit of my titles and sampling. I can't go further than 12 titles and which includes three tracks 48 k samples simultaneously. It seems incredible, but it is not enough good my goals of recording. It seems that what I really need, is a Quad-Core or even an I7. On my budget, it will not happen. My budget is $ 400.00 and it grows. I realize that maybe these specifications do not support upgrading to even a Dual-Core, and even if I could how much difference I would hear and experience in Cubase and Proteus fact?
What I would really like to get out of this system is a machine of 24 tracks with the same 48 k samples I need for serious recording, I'd settle for 8 simultaneous samples per song as well as 24 tracks. Basically, it would be normal 16 pieces of Cubase VST over 8 tracks samples of Proteus. What would rock!
If a serious CPU upgrade is plausible, should I upgrade my CPU cooling fan and XP Home Pro? Is my only option a faster Pentium 4?
Here are the specs:
Number of cores per processor 1
Number of threads per processor 2
Name Intel Pentium 4 530
Code-named Prescott
Specification Intel (r) Pentium (r) 4 CPU 3.00 GHz
Socket LGA 775 package
F.4.1 family/model/no walk
Family expanded/model F.4
Core Stepping E0
90 nm technology
Basic speed 2992,6 MHz
Multiplier x Bus 15.0 x 199.5 MHz speed
798,0 MHz rated Bus speed
Stock frequency 3000 MHz
MMX, SSE, SSE2, SSE3 instruction sets
Data L1 cache (per processor) 16 KB, 8-way set associative line, size 64 bytes
Back up cache (per processor) 12 Kuops, set of 8 - way associative
Cache (per processor) L2 1024 kilobytes, size 8-way line set associative, 64 bytesNorthbridge Intel i915P/i915G Rev. B1
Southbridge Intel 82801FB (ICH6) Rev. 03
Memory type DDR2
Memory size 4096 MB
Frequency 266,0 MHz (3:4) memory
Latency CASE clocks # (tCL) 4.0
RAS # for CASE # (tRCD) 4 clocks
RAS # Precharge (tRP) 4 clocks
Cycle Time (tRAS) 12 clocksMotherboard for Dell Inc. seller.
Motherboard model 0M 3918BIOS vendor Dell Inc.
BIOS Version A10
Date of the BIOS 04/01/2006
Memory SPD
Module 1 DDR2, PC2-5300 (333 MHz), 1024 MB, Nanya Technology
Module 2 DDR2, PC2-5300 (333 MHz), 1024 MB, unknown brand
Module 3 DDR2, PC2-5300 (333 MHz), 1024 MB, Nanya Technology
Module 4 DDR2, PC2-5300 (333 MHz), 1024 MB, unknown brand
Software
Windows Version Microsoft Windows XP Home Edition Service Pack 3 (Build 2600)
DirectX version 9 .0cHeath has
The 4700 supports all Dual Core processors.
Any Socket LGA775, processor P4 520, 530, 540, 550, 560, 570 with HT technology will work.
Bev.
-
After that upgrade to El Capitan about this Mac does not work"
After the upgrade to El Capitan by clicking on about this Mac, nothing happens and by double clicking on System profiler I get the error message from the Application "System information" cannot be opened. I ran disk utility, tried in safe mode and as a guest and all user are the same.
It is a late 2008 MacBook. It's on 10.5.8. I did a clean install of 10.6.3 with upgrades to 10.6.8 to give birth to El Capitan. According to me, that he was working at that time. Then, I migrated the user of a backup image of the 10.5.8 account. Who could have when it stopped, but I'm not sure.
I had two newspapers @ pastbin.com/Mca6LS4H
Hello mrtrytofixit,
Thank you for reaching out to the Community Support from Apple. I know how it is important to be able to rely on public services provides your Mac and I want to help you get things working again. With troubleshooting, you have already done, it seems that it is a systemic problem.
From there, what I recommend is reinstall OS X El Capitan using OS X Recovery on your Mac. It should not remove or erasure of your data, but it is recommended that you make backup before you do incase of an emergency.
These articles will guide you through the backup and reinstallation:
Use Time Machine to back up or restore your Mac
How to reinstall OS XIf you have any questions or concerns, inform the community. We are all here to help.
Best regards.
Maybe you are looking for
-
Upgrade: numbers can not find the field to change!
Sorry if I am dense here, I'm sure that there is an obvious answer, anyone here know, but I can't imagine it or find info already online. I just upgraded from Cougar to El Capitan. Then, I upgraded a previous numbers spreadsheet to edit it in El Cap
-
Description of how to install XP on laptops without optical drive
I see quite a few questions about how to get the xp on a computer that has no optical internally. I know that the m200 has a costly dedicated external cd rom it starts to leave, but if you have any other brand of external CD-ROM you will have trouble
-
Need info on the HARD drive adapter and utility installation Vista on Equium A110
I am the owner of a satellite A110 - 233 (PSAB2E), and I've recently upgraded to Vista after installing 2 GB of RAM. However, I was somewhat short space hard disk and I dealt with a new 120 GB HARD drive. However, it seems that the computer has an in
-
Add midi channel to a platform of guitar?
IM using MainStage for a platform of guitar. Ive got an Apogee Gio for an analog interface and also using a Fishman Triple Play for a MIDI controller. In Mainstage, I wish I had a hybrid analog / noon entered, so I can combine something of the reserv
-
How can I prevent pictures of my itouch 32G to appear on my ios Iphone6 9.2 child? If I give him his own apple ID then she loses all his music already purchased.