Dynadock does not work with Vista
Press releases USA Toshiba the Dynadock was WXP and compatible with Vista, but it's NOT.
Nobody knows when it's released software / or ways to get the Dynadock to work with Vista?
I put t know how it works in the United States, but here in Europe, according to the specification Dynadock, it only works with Windows XP SP2 home edition. I don't think someone can give you info on support for Vista especially here in the user forum.
Try to learn more, contact your local dealer or partner authorized in your country.
I have a L300D-13s that came with Visa Home Premium on it.
His work very well outside the wireless that refuses to work.
I always "Wireless Association failed because Windows did not receive response from the access point or wireless router.
The wiresless is a Realtek RTL8187B Wireless 802. 11b / g 54Mbps USB 2.0 Network adapt
I am running the latest version of the BIOS and the 6.1148.924.2008 drivers dated 2008-09-24. If I use the latest drivers on the RealTek site, I get a message about an unknown error.
If I use the NETWORK Ethernet card, then he gets a fine IP address so this isn't the show indicator to publish.
Its not wireless security (I understand that Vista does not support WEP 128 bit). I turned off and it still does.
Other laptops running XP connect correctly and this laptop connects fine using no security or WEP or WAP so I boot Linux.
If the problem obviously lies with Vista and/or the drivers.
If someone has solved this.
And no - don't tell me to go out and buy a router "Vista compatible".
If Vista does not work with router XP and other operating systems compatible with Vista is wrong.
> Other portable XP connect correctly and this laptop connects fine using no security or WEP or WAP so I boot Linux. If the problem obviously lies with Vista and/or the drivers.
I would say it is not a Vista problem or a Realtek driver problem because I have a Vista and Realtek WLan card and I can connect properly to my router.
In you case, I would say that there is a compatibility problem between the router and the Vista because as you said the laptop can connect properly using Linux.
I have goggled a bit and could solve most of the people who have had this issue, update the firmware on the router s.
Maybe you should try that too.
My Logitech USB Desktop Microphone does not work with my Vista, Service Pack 2, the PC. He asks the driver, but Logitech says it's in the Vista software, here is the largest part of the error message:
Windows has detected a new device attached to your computer, but did not find the driver software, to make the device usable. Each device manufacturer typically includes the driver from a CD that comes with the device, or for download on its Web site.
Signature of the problem: Problem event name: PnPDriverNotFound Architecture: x 64
This seems to be a problem that's happened, but after searching for hours, I can't find a quick solution. Any help?
Please do as I suggested in the answer above is probably the solution.
You can also do this after the above.
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
Then lets refresh the USB stack
Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
all except the category itself - REBOOT - it refreshes the drive and battery USB
This KB shows XP how to and the method of Vista is identical
If necessary try these two:
Tips for solving problems of USB devices - and a Mr Fixit
Hardware devices not detected or not working - Mr. Fixit
I hope this helps.
Rob - bicycle - Mark Twain said it is good.
I did all the uninstall/install as shown in several places and nothing won't print. I get just "printing error" in the status area.
This worsens the problem as it used to work fine. It got to where I could unplug/plug in the printer so that it and the laptop, or restart the laptop and the dependiing overnight, one of them would solve the problem. Then, it is to reinstall the drivers, and it worked for a while before returning to the steps of the power.
Now, it does not matter. No printing. No "job processing" flashes on the printer, only "printing error" when I opened the Printers folder. I'm on the good (and default) printer and the correct port. All connections are good and the printer works on an old laptop w / XP and ALLOWS to work on my other laptop, also with Vista. Now it does not work it reliable either.
Using the correct driver for Vista 32-bit, so it isn't.
It is a great printer and buy another isn't on the horizon of affordability.
I suggest you to go through the steps mentioned in the link and the Coachman.
Printing problems? Try the Windows HP Print Diagnostic Utility
I bought a new toshiba 4 GB USB but it did not work windows Vista and an update is not available. Can someone tell me if there is another solution for my problem.
Sorry for my bad English, I'm German
Tried this stick with another computer? The stick is may be defective and you need to exchange it by your distributor. Just try it and let me know what happening.
See you soon
I have a Toshiba equium laptop (Vista)
I am wanting to buy a scanner so I can scan documents to computer. (I have an all-in - one but the scanner does not work)
Please indicate where to go?
Sorry, I Don t understand why you want to buy a new scanner. First of all, it would be nice if you tell us what satellite you have. Other useful information would be exactly, what does NOT work on your satellite and your 'all-in-one '...
Please provide more information on this subject and maybe you shouldn't buy a new scanner.
My computer did not an automatic update in over 6 months. I discovered this when I could not install my tax preparation software. the error message is gone "windows installer does not work, a file may be damaged, contact support windows technique.»
Check the alteration of the file by clicking on Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type
sfc/scannowFor the results of the SFCCheck the alteration of the file by clicking on Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type
findstr/c: "[SR] cannot" %windir%\logs\cbs\cbs.log|more "
The system update tool
Ensures the consistency of the folder WinSxS (Side by Side).
For 32-bit Windows
For 64-bit Windows
To see the results click on Start - All Programs - Accessories - right click on command prompt and choose run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).
Reregister Windows install
Desktop shortcuts are shortcuts to the Windows Installer which then starts the Office program.
Click Start - all programs - Accessories - right click on command prompt and choose run as administrator. Type
That you re-register Windows Installer.
Recently I've upgraded to Windows Vista 64 bit because I bought the additional RAM. I downloaded the drivers for my USB wireless adapter (which is a WUSB54GR), but they do not come with Wlan Manager. I tried to install the WiFi Manager since XP drivers, but it won't work.
The reason why I want this to work is that there are several SSID on my network with the same name, and I want to choose the best of them. Vista indicates the name once only and does not automatically select one that suits, and now I have lag spikes in games like World of Warcraft.
A good third work program would also work I guess, or a vista/hotfix patch for it.
Need help please, I searched the internet for this many times with no effect
Thanks in advance.
Thanks for the reply. After some research more, I found out it was something else that caused the lagspikes.
Windows Vista checks to see if there is a best available wireless connection every minute or so.
I downloaded a little program called WLAN Optimizer .do, it runs in the background now and my connection works great.
I could not get Age of Empires II working on my laptop - first with Vista and now Windows 7.
It installs OK and when you go to launch the small graphics launch box comes up, then the screen becomes phsychedelic before returning to normal and nothing more.
It is a Compaq Presario with a chipset Mobile Intel R45.
If you weren't able to get the game to run in that same laptop with Vista or Windows 7, it seems that there is a conflict of material with this game. I see that this game was for older systems and only supports graphics 800 x 600. You can turn your the desktop resolution to 800 x 600 with 256 colors, and then run the game. If this does not help then you may install DirectX 9 and see if that helps. Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think.
I have improved my Tecra M7 for Vista Ultimate last weekend and there are a number of things that do not work. It's very frustrating because I followed the procedures shown on this website diligently upgrade and will have problems.
Can someone tell me what zip file contains the utility Toshiba HDD Protection shock as I installed everything (except the Config Free because the Zip file seems to be corrupted) and I can't find it anywhere. I noticed that when Vista was recommend the automatic updates after installation it is recommended an updated driver for the HARD disk Protection utility, but is nowhere to be seen and I can't find an installer for anywhere. Does anyone know how to handle this?
Thank you very much
I don't know if it will help, but try to use the utility disk for Tecra M9 protection.
I bought a Toshiba 500GB (PX1668e-1he0) guaranteed, and I can't install it on my PC with Windows Vista Ultimate 64-bit.
On the box says it works at least with Vista, but I can't install it.
When I plug it i and autorun start I have an error message: the digital signature is not valid and it is impossible to install it.
Now, I've read that this device must be compatible with 64 bit OS
What can I do to make it work?
Why Toshiba still sell this device if it is not compatible with the current operating system?
Is it possible to update the digital firm pilot?
The security problem is on:
Audit with the following \XXXXX\BIOLOGIN\securelogin-x64.sys file of Microsoft Windows security
Yes, according to the document, it is possible to use this HARD drive with 64-bit system.
The software is updated
As far as I know, you can connect the HARD drive to the PC then right click the CD part of the hard drive you and choose install or program.
Why Toshiba Tempro don t works with windows vista 64 bit ultimate mey Satellite A300 - 1 l 4?
Any idea where I can find a solution?
Thank you very much
I m not very well why it doesn't work on Vista Ultimate, but to my knowledge, there are a few Vista Toshiba Utilities and tool that are not fully supported by Ultimate.
But why you use Tempro? This tool reports only if a new driver has been transferred on the Toshiba driver page.
OK, it's interesting to know that a new driver is available, but if your laptop runs without problem I wouldn't update or reinstall anything s!
There is a proverb which says: never change a running system.
Have tried to get the WIFI adapter works on Vista, have downloaded the latest drivers but still no joy.
I know it works because I have a dual operating system: XP & Vista.
What do you mean exactly by still no joy? Have you installed the right driver WLan and has been the WLan card recognized in the Device Manager?
I think the laptop is using wireless Mini-PCI Intel PRO/Wireless 2200BG Network card.
In order to check again if a good driver was used.
Please don t be angry with me, but it is a book of 5 years and I m sure that it s not Vista capable of course you can install Vista on this unit but it of not impossible that some devices would not 100% compatible.
How do you get the WiFi to work on vista?
Your question implies that you couldn t your work wireless home or both.
This way, you first make sure you that if you really have wireless or not. It s not that hard. Just look in the windows Device Manager.
If a wireless card is installed, then give feedback and maybe we'll find a way to connect with something as an access point.
If no, then buy a card and let it install by a qualified technician, you can also apply this technology for the wireless connection. :)
I have a P100-400 (PSPA6E) Satellite and I just got the new version of Windows Vista x64bits. I tried this version of Vista because this series of laptops in the 64-bit processors. Well, the problem was when I downloaded the drivers to display on the site and when I'am install the installer says I'm not a Windows vista OS.
Well actually these drivers only work for Vista x32bits. And I had the same problem with the audio drivers. If Vista was running really slowly and noiselessly, perfect...
What I am asking, that is, if you realize laptops with 64 bit, why aren't you drivers that work with 64 bit systems...
In fact 64-bit Toshiba drivers are not available at this time on the Toshiba page.
I think 64-bit drivers are not available because Toshiba doesn't provide any laptops equipped with 64-bit operating system.
But as far as I know that the new 64-bit drivers should appear both text.
I'm also looking for these drivers because I m an owner of the 64-bit version of Vista.
It seems that we have to wait but I m sure that the drivers will be available.
Maybe you are looking for
I got an iPod shuffle second generation, so I bought a load dock online to connect to my mac. Whenever I try to restore it, it says "iPod"iPod"could not be restored. An unknown error occurred (1429). "I have now completely erased from the iPod and tr
It seems that the network adapter has failed in the MediaSmart server. I tried to connect to the server on the network and using a crossover, cable and the connection keeps linking, drop, then connection then, abandoned ad-nauseam.
Hi all I have a problem with my battery. 1. the computer is off2. the battery is LOW3. I plug in the power cable and the light is Orange and the battery recharges.I know that the battery is being charged because when I turn on the computer after a wh
I recently bought a Lenovo Flex 3 Lap Top with Windows 10 operating system, and it has been giving me a lot of problems when playing music on itunes. When I opened my itunes and play music my mouse cursor freezes every two seconds. IM become frustrat
Hey guys... Sorry, but I would like to ask you a favor to help me update my Nvida Geforce gt550M graphics card driver as latest games require the newer drivers to run without any problems... I tried so many ways guru3d driver sweeper program to remov