DynaDock DVI & recognition on the Qosmio G SOLVED series

Similar Questions

• A few Questions on the Qosmio G35-AV650 series

  I have some questions that I would ask to my Qosmio G35-AV650.

  1: I've updated the BIOS to v1.4 (2005), to v3.3 (2007), to install Vista.
  Vista does not work so I removed it - I guess that I need to update the drivers again.
  In any case, I got my PC to normal - delete the partition allocated to Vista and reset the boot record.
  However, there was something that happened to my pc. The model has been replaced by "Laptop".

  My DVD DO NOT work for recovery. It says 'BAD COMPUTER'. IM wondering how it could have happened.
  If anyone could shed some light on what might have changed the name of the template, do so.
  The only thing I can think is the update of the BIOS. Any ideas?

  2: my HARD drive crashed at 1 point of time before. In order to
  avoid any loss of data, I have intertwined around hard drives and reinstalled XP on the secondary HARD drive.
  However, this is somewhat troblesome. First of all, the Qosmio player no longer, because it is
  the disk of HARD original 1. Secondly, if I did a reinstall on 1 HARD drive, it would remove the Qosmio Player?

  Third, if I put the hard drives back to the initial placement and boot from HDD 2, HDD 1 IS NOT recognized by the PC.

  It seems I have TO boot from HDD 1 for 2 HDD is picked up by windows.
  Is there a way to test PC to start from 1 HARD disk then boot from the disk HARD 2, eventually recognize two hard disks?
  Or is there a way to manually "load" both hard drives?

  3: what would you recommend to do if Windows won't recognize the Bluetooth device. I know that his work.
  I installed a Virtual Machine and installed the bluetooth in it. It is during the driver installation process
  that the installation crashes with devices NOT picked up by the operating system. Any ideas? I can't use the recovery DVD trying to install
  the original drivers [see #1].

  How can 4: if I'm using the standard Windows Xp CD, I load the Toshiba RAID drivers? The only thing I see
  includes a floppy drive, which does not have the kaptop.

  I know this is a long post :)
  Thank you for your responses and reaing.

  Man, these are some deep questions. Your laptop looks new, under warranty? If so, go back to Toshiba and make them understand the 'thing'. These things are problematic I know... it is a little hidden from any sale side isn't it.

  If you want to put in Vista, just follow all the instructions in the Forum of Francisco - you can tell that's the one with the most comments. If you follow the messages from scratch, you will be able to get your business laptop.

  Francisco is our leader of the sect. He's awesome. He saved us where Toshiba does not have. Welcome to the fraternity.

  Brother of Tay.

• Update BIOS question on the Qosmio F50/F55 series

  I have advanced and updated the bios of the 1.30 the 2.20 and everything went well.
  I did not like the new bios for the portable was little more warm, so I went to downgrade to the 1.30.
  I have two toshiba Web site and has made the winphlash64.

  Thing is that it won't let you not downgrade, then I open the phlash.ini and changed the "UpdateMode = 3-UpdateMode = 0" and he replace the parameters to downgrade. He did the downgrade successfully as "starting from 1 to 35 block". When it restarted I get a black screen only dead pc, no MESSAGE. I did the recovery from the crisis and did not work on a USB "bios qosmio are greater than 2MB and can fit on a floppy."

  Maybe someone here knows perhaps changing the "UpdateMode = 3-UpdateMode = 0" I have to manually reset the cmos?
  I don't have a warranty, and I know that the laptop is fine, and the bios chip is soldered in 32 pins are difficult to desolder.

  Thank you very much!!

  > Thing, is that it won't let you not downgrade, then I open the phlash.ini and changed the "UpdateMode = 3-UpdateMode = 0" and he replace the parameters to downgrade. He did the downgrade successfully as "starting from 1 to 35 block". When it restarted I get a black screen only dead pc, no MESSAGE. I did the recovery from the crisis and did not work on a USB "bios qosmio are greater than 2MB and can fit on a floppy."

  As far as I know that you need a traditional version of the BIOS update in order to downgrade the BIOS

  However, the fact is that your laptop does not start, which means that the module ROM was not properly flashed and it needs to be flashed again with a disc of crisis.

  ASP request for help!

• Some problems after installing Windows 8 on the Qosmio X 500

  Hello
  Sorry for my bad English...

  I have a qosmio x 500 PQX33E. I installed the upgrade of windows 8.
  But I have problems drivers.

  For the eco mode, the digital key does not respond.

  For the HDMI to the TV connection, before the connection is automatic. With windows 8, I have to do manually.

  I had to disable the optical driver to operate the bluray player.

  And several other pilots missing for windows 64 b 8.

  Do you know if I can use a different drivers, qosmio, qosmio x 875 as?

  is that Toshiba will create windows 8 drivers for our old machines and other qosmio?

  Thank you very much for your answers.

  > Do you know if I can use a different drivers, qosmio, qosmio x 875 as? Is that Toshiba will create windows 8 drivers for our old machines and other qosmio?

  As far as I know Toshiba released an official list of old Win 7 notebook series that will save 8 drivers and support.
  The matrix to win 8 can be found here:
  http://EU.computers.Toshiba-Europe.com/innovation/JSP/checkWindows8Compatible.do?service=EU

  As you can see, the Qosmio X 500 series is not that is why I think that Win 8 drivers will come out of this show.

  But in some cases, you can use the tools to win 8 who were released for other series.
  As for example the VAP Toshiba to win 8.

  However, this does not mean that everything will work as in the past using Win 7

• Games on the Qosmio X 770

  I have to admit that I've spent 1600 Euro for nothing. Toshiba Qosmio x 770 is not capable of anything. The worst happened, you can always buy. I had a week and sincerely regret that I bought.

  30 no games we work on this laptop. Its only advantage is that it has 3D.
  I do not recommend this product to anyone.

  I put t agree.
  There are various threads on the Qosmio X 770 and almost all games are working properly.
  In the early days there was a limitation GPU / ventilation Framerate, play games like GTA or Battlefield 3, but was solved the BIOS update and using the driver v. 296.10

• Satellite U400 - conflict Dynadock DVI with Intel graphic driver

  I try to install the Dynadock DVI on my Satellite U400 / Vista 32 and after reboot, I continue to have the message Igfxext Module has stopped working.
  This is part of the Intel graphics driver.

  When I uninstall the Toshiba Software video Dock and drivers (exhibit Dynadock) components.
  I don't have the problem... but I can't use an external display connected to the Dynadock.

  I updated the Intel display drivers with no difference. Anyone who could help me on this one?

  Thanks in advance.

  Hello

  Check if you can update the graphics driver using the graphics driver for the Intel page.
  I have a U400 too and I installed the Intel driver from the Intel page.

  Welcome them

• Can I use the Qosmio G20 as a mediacentre?

  Hello
  Is it possible to really use the Qosmio as a mediacentre?
  I want to have the Qosmio in one piece and then plug the tom my TV and the audio Center in another room.
  For the photo I think than the DVI on can be used, but for the sound, which can be used?

  Everything must be used by the remote control.

  Allt sounds possible (on papar) but I failed to do as a speider web mediacentre in my house?

  Each of you?

  / Lars

  Hello

  If you want to connect the Qosmio g20 on the HIFI audio system I advise to use audio S/PDIF output line.
  The plug is the same as the headphone jack.
  I think you should be able to use it with the MCE or Qosmio player.
  I think that the remote control only works with MCE but I m not 100% sure.

• Recovery after that hibernation is too long on the Qosmio F30

  Hello

  I use my Qosmio F30 laptop about 3 years and still have the same problem. Recovery of Windows after hibernation, it takes about 1 to 1.3 minutes long. Of course it is not too much, but I see how quickly rescind my other two books, with a lower and more good configuration cheap than the Qosmio.

  Their recovery time is only 15 to 25 seconds. Where the problem may be?

  I noticed that when the recovery starts, it will quickly about 2-3 seconds, and HDD LED at the moment is bright lighting. But then the progress freezes and continues slowly, and the HARD Drive LED lights more weak, it flashes just with a very fast rate. I think perhaps it means that problems on the HARD drive, maybe it works in mode "snail" at this time there and goes to normal work only after complete recovery?

  Please help, I can't solve this problem on my own.

  PS: Sorry for the bad English, it is not my mother tongue.

  I checked that my pre-installed Vista Satellite P200 and the resumption after hibernation is about 55 seconds. Several applications are open. 1 minute is theoretically OK.
  Your other laptops are not known to me and I can't say anything about it.

  Using Vista too?
  You close all running applications before using hibernation mode?

• First HP: help using the command CAS.solve (STRING1, STRING2) within a program

  Hello and hope you can help me with my problem!

  I write a somewhat complicated program (operating mode no case) who has a subroutine called STSOLVE where his entry is always a string from the main program that contains a formula as "'I' = 'V' / 'R', 'R'" and its goal is to replace all the variables contained in "" to the compatible standard CASE generated automatically variable (teiXX where XX is a unique number) and then use the command solve to assess this formula (say final temporary formula "tei1 = tei2 / ') tei3, tei3"). Before returning, he replaces the temporary variables, generated automatically with the original on the result, so the original formula will be sent back solved in the main program.

  My problem:

  It returns the result {UNDEF} or simply {} even in expressions that absolutely work if used with the command solve manually, in the main screen of calculators CASES when the CAS.solve command is used either! Even though I know that the entry of this order is correct according to the tutorials I've read in the forums, I can't work properly.

  I tried all methods of writing the order and I only managed to get a result when I wrote this:

  RPART1: = cas.expr (RPART1);

  RESLT: = case. Solve (RPART1, "tei2");

  .. .or RPART1 contains, say, the part 'tei1 = tei2/tei3' (NOT AS A STRING!) and "tei2" SHOULD be written as shown here, a chain, entered manually just for test (can be 'tei1' or 'tei3' too for this particular case). However, if I put "tei2" in RPART2 of local variable in the subroutine as a string and then pass this variable to the solve command, say:

  RPART1: = cas.expr (RPART1);

  RESLT: = case. Solve (RPART1, RPART2);  RPART2 contains the string "tei2", "tei1" or "tei3.

  Here again, I get a {} as a result!

  I tried so already a lot of things that I don't know exactly what mention here, but I hope I described the main situation enough to start detailed and of course, I'll give you any other information you might need to give me more help. I tried to paste the entire subroutine, or even the entire program, but I don't have any windows pc to connect the first HP and copy the program. I am writing from an Android Tablet and I should maybe type the everything here is not very easy, I will of course if you ask.

  Perhaps, I should also note that the generated vars tei1, tei2 etc. do not exist as variables in the calculator, but if I copy channels same as the program tries to run in the command CAS.solve and manually write in case screen (not a string of course) then they get solved without problems.

  Hope to get help and learn from you and I wish I could found more help about it online, but it seems very difficult and also all the tutorials I found on the cas.solve command in the programs did not work in my case!

  Andreas

  It works, or is this not the problem?

  CAS.solve ("tei1 = tei2/tei3", "tei2");

  I get output: {tei1 * tei3} which is correct.

• U3.0 dynadock not resumed after the laptop sleep mode

  Hi all

  I am confronted with the problem that my Dynadock U3.0 does not resume if I fashion "sleep" on my cell Samsun.

  It works very well at the start, it works when I take a full stop, and I just checked it in Hibernate mode and it seems to work fine too.

  Can anyone help me please with this problem.

  _Other factors: _
  I'm running it on a USB 3.0 connection.
  I have this USB connection should remain in charge mode 'sleep'.
  Windows 7
  64 bit
  dynadock model: PA3927A-1PRP

  The only way to get after that 'sleep' mode call is to pull the power cord out the dynadock, wait, then reinsert it.

  Any advice would be welcome.

  Thank you for your help

  Hello

  I think that it s not Dynadock question but with the USB ports on your computer/laptop.

  The sleep or Hibernate mode affects devices attached to the Dynadock and not directly the Dynadock. If the computer/laptop wakes up fashion 'sleep', the Dynadock should be recognized automatically. In the case where the device does not recognize the Dynadock, there must be something wrong with the computer.

  By the way: you said the Dynadock is connected to USB 3.0.
  I recommend to go to a USB 2.0 port and test it again.

  Last but not least: make sure Dynadock uses the latest display driver that you can download from this page: http://www.displaylink.com/support/downloads.php

• How everything is the Qosmio?

  My Satellite 5200 series certainly works "whisper quiet" - is a JOY compared to my excessively noisy desktop computer. Now that high spec ' gaming graphics cards are included in the top of the page Qosmios - can they still run relatively quietly?

  I would like a machine mainly for video editing and assuming the Qosmios are better suited to this task to another ongoing series.

  Hi Tatt

  My brother has Qosmio G20. I used the camera to create many DVD movies recorded with my video camera. My impression is that the unit is pretty quiet. If you work something usual, watch TV or even play games, the unit is quiet.

  Just under the power of the cooling fan works at maximum speed. All my movies must be before converting it can be burned to the DVD. Just while the conversion process is running the unit was stronger but it's normal and specific for each portable unit, even for desktop computers.

  Good bye

• I can watch DVDs in a window on the Qosmio?

  I currently have a Satellite 5200 series that allows me to watch DVDs in a window so I have other tasks.
  Is this also possible with the Qosmio?

  Hello

  There are many different applications of DVD player on the market and you can use each of them. The WinDVD is preinstalled on the Qosmio, but if you want, you can install a different application like PowerDVD or something like that.

• How to disable the backlight on the keypad for the Qosmio X 70-A-120

  Please, do you know how to disable the backlight on the keypad for the QOSMIO X 70-A-120?

  Concerning

  Open "assist Office > function key" and you will find the option of keyboard backlight. Change in status OFF and t should be disabled.

  Check it out.

• How to use the Qosmio DX730 as screen

  I use All in One PC DX730 Qosmio.

  Is it possible to make the windows Start / computer to use the display as a monitor?

  Sometimes, I need to see a file on my old PC Tower and I would not have an additional screen for that - well on the DX730 is removed during this operation.

  Thank you for inform

  Hello
  your pc need a destop map grafik with an hdmi output, if there you can connect the Qosmio dx730 with your 'OLD' destop pc and use the Qosmio as a screen.

  I think it is the only possibility.

• On the "Image Enhancement Utility" software for the Qosmio series

  Hey all,.
  As you may know, the utility of photo development is responsible to define the image quality in 3 software: Windows Media Center, WinDVD & WinDVR.

  It gives more bright colors, a picture more clear and other improvements in the display mode full screen.

  I was wondering if it is possible to have the image Enhancement Utility affect the image quality of other software such as Windows Media Player, Zoom Player, Media Player Classic or other players.

  When I got my Qosmio, I didn't expect the Qosmio announced engine (which is controlled by the image Enhancement Utility) to be only compatible with the 3 predefined software!

  I think it would be great if Toshiba could specify the software for which we want strengthening of motor Qosmio image, as an option in the "Picture Enhancement Utility.

  I really hope that Toshiba will hear the appeal in the wild. ;)
  Next time!

  Alcahest

  Hello

  As far as I know this utility allows you to change the image quality depending on your viewing environment and also allows you to select external input parameters for video camera, games consoles etc. That s right it works with Media Center, InterVideo WinDVD and InterVideo WinDVR because these programs are pre-installed on the device. In my opinion, the development of photo utility is a very nice utility and as far as I know inimitable.
  You cannot expect that this utility must works with all kinds of programs, but maybe the next version has a few extensions ;)

  Best regards