Dynadock power management problem

Similar Questions

• Cannot save the T61p XP/SP3 - Power Manager problems, programs, limited systems available

  Hi all - when I got this - Rockin '-mobile initially I could put my own power plans without problem.  Now it won't save my new powerschemes.  I try to create one, to complete the last step, and then the power mode is not in the drop-down list.  I read somewhere on the Web that this may be due to SP3.

  Also, the only one I have access to power management are reading video and performance.  I tried to uninstall the power manager and the DLL associated with and then put it back, but that did not help.  Also, I don't see any reference to this problem to be solved.  Thanks in advance.  This gets really annoying as I like to use as little energy as possible since I quite often use the computer on battery power.

  Thank you!  g-

  Bravo - who did it! Thank you!

  Here is the solution to save the future of research some time:

  *******

  Method 1: Use the Powercfg.exe utility to restore the default power mode

  loadTOCNode (2, 'resolution'); You can use the Powercfg.exe utility to copy the power mode of the user by defaultto the currently logged user profile. You can do this because eating patterns are only related to individual user accounts. To copy the default user schema using the Powercfg.exe utility, follow these steps:

  1. click on Start, click run, type cmdand then click OK. 2. at the command prompt, type the following command and press ENTER: powercfg /RestoreDefaultPolicies

  ********

• Satellite M30X - power management problems does not

  Hello

  I am new to the forum and some difficulties with my power management settings.
  Don't know why, but don't can't Hibernate my system or to keep. If I go to the Start button and try to shut down the system, I can only close or restart the computer. The standby or Hibernate button is sunk in gray, not allowing to choose these options.
  I have a Satellite M30X-144 with Windows XP Home Edition.
  From what I remember, these functions were functional when I bought the computer.
  Can someone give me a help?
  Thanks in advance.

  Post edited by: Gintonic

  Hi Pedro

  First of all welcome to the Toshiba Support Forum ;)
  I'll try to help you.
  Well, you can find on unit you Toshiba Power Saver tool. This tool allows to use the Hibernate and standby modus. Please go to control panel, then power saving.
  There you can find lots of options and tabs. Go to advanced. The Enable hibernate support option must be marked.
  I won t explain all the options, but check these options in this tool.

  Best regards

• Power management problem: computer stops responding

  I bought a HP D4790y desktop system on a year and a half. The problem I have is that somethimes when I put the computer to sleep (start-> sleep), the monitors shuts down but the processor does not seem to go to sleep (i.e., the power led on the enclosure does not blue (normal) to orange (sleep)). When this happens, I am unable to get the system to begin to meet again, and I have to force a shutdown by pressing the power button for a few seconds and then restarting. I've upgraded to a new graphics card (NVIDIA 8500 LFE) thinking it was a mismatch with the graphics card, which has been the cause of the problem - no luck.

  A related problem is that sometimes the computer goes to sleep very well, but when I come back to start working again several hours later, light of the cpu has already changed back from orange to blue, but the system is completely insensitive (as described above) and I have to force a shutdown and restart. When I check the system event log, I can see the factor of reactivation with "Wake Source: Unknown" in the comments.
  The Sleep function works perfectly about 75% of the time. The other 25% of the time, one of the problems above occurs.

  Hi CrowT,

  Take a look at this thread the Technet:

  http://social.technet.Microsoft.com/forums/en-us/itprovistasetup/thread/89d54396-1070-4cbe-b79f-46384d7de571

  He gives excellent advice of troubleshooting for sleep problems.  One of the measures listed will display any device which is configured to wake mode 'sleep':

  Click on start-> all programs-> Accessories.
  Right-click command prompt, and then click Run as administrator.
  Type the following command and press ENTER.

  Powercfg - devicequery wake_armed

  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Power management problems

  
  
  

• P10 554: problems with display power management

  It is not possible to reactivate the display (mouse movements, pressing certain keys, pressing the key) when it is turned off by the power management system. The motherboard has already been replaced by a service representative Toshiba, I even reinstalled the system, but the problem persists. The behavior is not reproducible. Sometimes it works, sometimes it doesn't.

  Anyone out there have the same problem? Is this a configuration problem or may be a hardware defect? It is already a known issue?

  Any ideas appreciated.

  Thanks in advance
  Karl Jost

  Hi Karl

  It is not easy to say, but it is possible that there is some malfunction of the equipment. In my opinion the last try to check this is to reinstall the operating system. If the problem persists there are certainly a hardware problem.

  Good bye

• M30X 129: problem of battery or power management road

  Hi all

  I had a lot of trouble with my laptop recently; When using just the battery I can watch it unloads and a minute, he can read about 30% or more, depending on the laptop will be beep like crazy and then go into hibernation. I put it to Hibernate at 5%. I find it incredible that the battery can lose about a quarter of its power in less than 60 seconds.

  I've updated the utility of power management using the Toshiba site, but it has not changed anything. The only time that I have the AC adapter and battery at the same time is when I charge the battery, if I'm near a power outlet and there is no need to reload, I always remove the battery.

  I read on these forums somewhere on the withdrawal of the Toshiba power management and just using windows, but I prefer not to change anything like that, as far as I'm concerned the Toshiba it should do the job! The laptop is still under warranty but my nearest authorized repair center is more than 200 miles away, so, does anyone have any ideas of what I can do or try next? I'm out of ideas...

  Cheers in advance,
  Colin

  Hi Colin,

  You don't say how old is your battery, but it is more likely to be a hardware problem with your battery rather than a problem with the Toshiba power utility.

  It seems that if one or more of the cells in your battery cannot hold its charge properly, and once the remaining cells the battery power exhaustion will fall suddenly.

  HTH

• Problems with the Power Manager 1.51 new T60 has

  I've updated Power manager version 1.51 has and I have problems with the gauge of Power Manager in the task bar. Life remaining battery is not updated once more. Is there any chance I can find an earlier version of the software that worked perfectly before? Or there is a method to solve the problem?

  Sincerely,

  Nikita Septucha

  
  

• X 230 win 8.1 power management device driver problem

  Hello

  Cool win 8 build in place upgrade to 8.1. Then all the tools Lenovo update and latest Lenovo compatibility package installed.

  This device is not properly detected. I think it's a driver problem Power Manager (based on an old post with the same problem, but no resolution posted).

  Lenovo X 230

  Type: 2330-A59

  Device instance path: ACPI\LEN0078\5 & 2890D 699 & 0

  Location: On the controller shipped compatible ACPI Microsoft

  I tried the typical removal of the device and re - run the PM (Lenovo.com last) driver installation package. No change. The device is listed back in the device as an "Unknown" Device Manager

  Everyone there knows the solution? I hope it's something that I'm a little more research.

  JIM

  Found the answer. It is NOT the PM Driver.

  Lenovo HID HW Radio Driver for Windows 8.1 (32-bit, 64-bit), 8 (32-bit, 64-bit) - ThinkPad ... Learn more

• a serious problem on the power manager

  Hello, I'm X 230 user using windows 7 and have improved the ability of the ram to 8 GB.

  It is not easy to believe, but I've struggled with this problem for a year.

  The problem is, I cannot uninstall the software, Levono supply manager.

  That the progress of uninstalling the program indicated by the installation process of Power Manager reached 94%, it's freezing outside here.

  Now no matter how much I'm awaiting resolution, it remains still frozen.

  Most ridiculous thing it is when I did close the shield installation process and reboot the laptop, Windows could not start

  while I do the system restore to roll back.

  How can I uninstall Lenovo Power Manager?

  * the reason why should I uninstall it it's done a lot of crushed against the software I use

  Thanks in advance

  Fortunately, I found a solution.

  During the uninstallation of the program progress was stuck, instead of restarting, I just ran the shield to uninstall manually at the command prompt. After a while, another unistall process has reached 100% and I managed to uninstall properly.

• T410 - problem with the gauge of power management (it will not change)

  Hello world

  on my T410 2522-EM1 gauge of management of power supply in the taskbar disappeared originally. After you download and install the latest version of the management of the power supply (http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-70601) and (http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-4GXPEG) gauge power management driver was back again. But after a while, I noticed that the gauge displays the actual battery charge but showed the load that the battery had started. In the power management utility, the correct values are displayed. I am absolutely no idea on how this could be. I tried to reinstall it, but it doesn't seem to work.

  Everybody suffers the same problems?

  Q - Ball wrote:
  Showed... load it?

  Who are you talking about? Are you talking about the time it will take for the battery to run down, or the percentage of the life he left behind?

  ...

  It depended on whether the laptop was pluged to the start (battery mode it displays the time and with the plug pluged it shows the percentage)

  What I have now is to uninstall everything and after I installed version 3.31... It seems to work.

• Features of the power manager and other problems associated with the T510

  For the better part of 5 years, I was a happy user of an IBM Z60m and decided it was time to move my z60 to my son and buy a new T510.  Well, I have after several weeks of property I can honestly say I'm irritated and frustrated by several current issues and I'm ready to send back all.

  Starting from the moment I pulled it out of the box I was having problems of power management.  I was on Microsoft help forums, called the lenovo support and spent countless hours on blogs and forums looking for help.   No matter what I do in the put lenovo on arrangements to take away my computer goes to stanby after one minute of inactivity and then wonder my windows password.  After a full day to insert my password my frustration level is off the chart.  I removed the password in the settings of the user who has not helped.  I changed the global settings to disable password in stanby mode which did not help.  I changed the function to optimize power and others, but none of it helped.

  Beyond these problems... I inserted two different discs to insert new programs and my system kept telling me that he did not read either.  I first thought they were zero but my old laptop ibm read without problem.

  So there you have it.

  Are you sure that the system is set the mode after 1 minute?  Or is the screen is locked?

  Try this:

  1. right click on the desktop and choose "Customize".

  2. click on "screen saver" in the lower right corner

  3. uncheck the box that says "On Resume, the logon screen"

  Which solves your problem?

• What is this problem? compatibility problem between your power management...

  Hi, my windows is 8.1 pro with media center, and my laptop is lenovo G500. I get this error in the center.what action is the first error and what is the the second error? and how can I fix them?... tnx.

  Have you tried to reinstall the Lenovo power management utility?

• Utility power management Portege A100 has stopped working

  The power management utility has stopped working and when I try to save the profile of Laptop/portable power management screen control panel I get a message saying that the power cannot be defined as two revision levels are incompatible.

  I tried to remove and reinstall the Power Management Utility and utility Toshiba but when reinstall I get a fatal error notice and the 0x51A error code. Can anyone help please?

  I suspect that this problem could have been triggered by an update XP or Norton Internet Security.

  Hello

  Maybe the registry is confused upward
  Try to clean and repair the registry using CCleaner. It the free tool.

  Firstly uninstall the energy saver, then clean the registry.
  Download page of the European driver Toshiba Portege A100 Win XP tools and drivers.
  You will need:

  Common module-> must be installed first!
  Energy-saving

  Good luck

• Canvio Connect II power management

  I have a Canvio Connect II 3 TB drive and I'm annoyed by the fact he's going into a deep sleep after a few minutes of inactivity, and it takes a lot to wake up to the top. This is my first Toshiba, all my other WD drives drive (Toshiba was the first to release a 3 TB portable 2.5 in car at a decent price), and I have never such a a problem with them, they all last much longer long to fall asleep and wake up much more quickly.

  Is it possible to change the settings of this player power management? Preferably something Toshiba itself? Everything I could find on the web are unacceptable "corrections" that writing something on the disc every 4 minutes so he wants to stay or things like that. I would like to have a proper fix. And nothing ever Toshiba, not even an acknowledgement of the problem, which they seem to continue for at least 5 years already.

  If this isn't the case, someone knows how can I contact Toshiba support by email? The only option I found on the Web from Toshiba sites is to contact by phone, there is no other methods (such as email or a contact form), which looks very suspicious. I have only seen this sort of behavior with fake Asian companies ' selling ' good products at half price, but actually take your money and disappear. All serious manufacturers should offer several contact options. Although I bought my drive from UK, I do not live in the United Kingdom, and I don't want to spend money on international calls with support from Toshiba to only be thrown from one person to another and probably never received real support.

  I am very unhappy with this situation, and if it is is not resolved, it will be the only player Toshiba I'll never own, I'll stick to what I know, works very well in the future.

  Hi, same problem here with my two hard Toshiba USB drives (Stor.e Canvio 3.5 "Desktop, 2 TB + 4 to). I searched all over the internet, came to exactly the same conclusion as you: many 'solutions' with third party software which works only during the session or on the same system, so the same problem could reappear as soon as you connect your HD to a different device, re-install the operating system or whatever. Here is a quote from another thread in this forum that says it all:

  Posted by amk316
  

  This is email support form

  ********
  Thank you for your recent inquiry to the subject of your hard drive Toshiba Canvio.

  We can confirm that there is no firmware downloads available for Toshiba external hard drives. (Energy saving) nature of use of the disc is because of the way it was built. Therefore, we can confirm that it is not editable.
  **********

  all better than toshiba support can solve this problem

  Post edited by: amk316

  Thus, it seems that Toshiba support won't help. I doubt that the problem is really "because of the way it was built', i.e.: caused by the material itself. or at least, I doubt that, even if that's the case, it can't be fixed by providing a new firmware. I guess that Toshiba DOES simply not invest time and money to solve the problem. Accordingly, like you, I never by a hard Toshiba will lead again if they don't change this attitude. Good luck anyway!