Dynamic range of exposure to t3i/600 d

Similar Questions

• Apple TV 4 Dynamic Range

  There is certainly a problem with the dynamic range on the Apple TV 4.  Watching movies on iTunes, the difference between strong and soft sounds is considerably reduced. This has happened since the Apple TV 4 has been released. Yes, the setting for the dynamic range reduction is on OFF.

  As I understand it, the reason is that the Apple TV 4 manages audio decoding. There is no option to send a raw stream to an external decoder as an A / V receiver. Basically, the Apple TV 4 does a bad job at decoding.

  There is a full thread on this on MacRumors. Many people are upset.

  Apple really needs to fix this. Watch movies on the Apple TV is terrible and I started renting on Vudu movies using my Roku box because of this problem.

  < link published by host >

  The real link to the thread is here: http://forums.macrumors.com/threads/poor-dynamic-range-even-with-full-enabled.19 51471 /

• Wide dynamic range equivalent Canon?

  All, morning

  I've got a shoot tomorrow and images is going to be edited, I know the guy do a very quick turn around time and also doent have LUT packages to use. I also know he usually pulls and like dynamic range color profile (clogged not) on the C100, as it seems ok on the camera, but also gives you plenty of room to play with him at the post. What would you say was the most simular color adjustment on the FS7, I tried loads but all seem to be really flat (as slog 3) or with a little look very burned in them as rec 709 standard.

  I know, it should have read so we could create the exact appearance etc., but it does not so is not an option.

  Thanks in advance!

  Greg.

  By saying this, 8 Hypergamma is much like the WDR

• Audio on the socket for headphones has a dynamic range very little. The music is piled up.

  Speakers of the laptop to listen to music very well. When I use the headphone music in my headphones has a dynamic range very little. The sounds of music crushed. The strong parties are limited and the soft parts are high until I can hear background noise in the recording. I've never had this problem on any other PC.

  I'm listening on iTunes, Soundforge, and any other audio program.

  I downloaded an updated version of the software for the sound card - that solved the problem.

• Lack of resolution 4 K P2715Q. Change dynamic range to full

  Hello
  A few weeks ago, I bought the monitor P2715Q and now it's finally here.

  Once I turned on my computer, it automatically recognized the monitor and had 4 k resolution works just by plugging basically.

  After a few minutes, the monitor went to 'power saving mode' (who knows why! because I was surfing on the net) and could not go on.

  I rebooted the computer and the screen was on 4 k resolution as before. Tried to test the resolution on an old game and at first everything was fine. A few minutes after, the screen went black, had to close the game (by pressing a button on console - couldn't see anything). The bone was black also and still... I rebooted the computer! (message on the screen 'power saving mode')

  The second time I restarted, the display came not with the 4 k resolution, now the recommended and maximum resolution is FULLHD (1920 x 1080).

  My first thought was that the driver has been corrupted. I uninstalled the driver through the Device Manager, downloaded the latest drivers for my video card and monitor but nothing!

  I do not see the 4 k resolution

  Data sheet:
  Video card: Gefoce GTX 660; 355.82 driver version (this video card supports 4K resolutions)
  OS: Windows 7 Ultimate edition; 64-bit (SP1)
  The monitor drivers, I tried: DELL_P2715Q-MONITOR_A00 - 00_DRVR_9XV8F.exe; DELL_P2715Q-MONITOR_A00 - 00_DRVR_7XVDJ.exe
  Display port: entry CDM

  Help, please!

  I went to a local store of DELL in order to test my monitor.

  Monitor works fine now.

  The following setting did the trick (on the NVidia settings):

  Output dynamic range: full

  By default, she had limited, change it to lot of my video card could support 4 k @ 60 Hz resolution.

• DNG at the PSD Dynamic Range

  Hello

  I have a small confusion about DNG and PSD. As far I understand WHAT PSD is equivalent to TIFF and DNG would be RAW. My question is if I had the file > Scripts > battery DNG in photoshop. then do what I'm doing in photoshop. and save the file as PSD. then delete the DNG of my file.

  will now layers (each layer being an any DNG) that have been imported to PSD still retain their dynamic range of DNG?

  Using the load files in the script of layers will change the DNG in regular layers. If you want to maintain the momentum of DNG, you need to use and do it manually. If you do this, you could delete the originals, but I wouldn't. I do not think that the HDR merge will work if your layers are dynamic objects, so it is best to keep the original files.

• How to increase the time that the viewfinder display is turned on (T3i/600 d)

  Hello!

  This seems to be a very basic question, but after searching for the manual and the web, I can not find an answer.

  When I press and release the shutter, the camera button turns on the viewfinder screen that shows the shutter speed, openness, indicator of level of exposure and ISO speed. But it turns off automatically after 4 seconds. I looked in all the menus and I can not find how to increase this timeout so that the information is displayed for a longer period of time.

  Help?

  Thank you!!

  I don't think it's an adjustable value.

• Using the Dynamic Range name in the Data Validation

  Maybe it's the time of day but I'm being a little dimwit here!

  I use = OFFSET(Data!$G$5,0,0,Vlastrow,1) for the range name Tbl_Names.  When I select F5 to check that the range is highlighted it seems everything is in order.

  On a leaf, I have a Data Validation that uses a list where the Source is = Indirect ($G$ 7).  G7 is the text "Tbl_Names".  The table of Validation and the content of the G7 is on the same sheet.

  Where am I going wrong please?

  Thank you

  John

  John

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• In the first video too dark files / how to set up the dynamic range better?

  Hello!

  To start, here's my basic/setup info:

  I am using Pro 9.2.0 (41) first build 10.0 Win, 64-bit (all updates are in Place to date,) on an i7 - 5930 K with 32 GB of RAM and GTX 770. The source of the layer footage is uncompressed AVI (captured with card HDDP Unigraf UFG-06 via the HDMI cable), 60 frames per second, with about 200 Mbit/s data rate, 12-bit, YUY2 video. I have CUDA and the problem occurs regardless of this.

  So the plot is, I'm running software on PC - 1, send the image of PC - 2 with the acquisition card, which records everything with the plug I wrote earlier. Problem is that when I copy the files to the PC-1 and import for the first, they appear darker than the real source. I tested with a test image of color, that I took a video capture card and then display and (professionally) alt-tab the original test image with the videos on a single screen. VLC video shows almost 1 = 1 with the original, but the first and all exported first lose one or two 'blocks' of dark colors and therefore lack of information.

  It must have something to do with the beach dynamic, is if he has any ideas how to change the beach on the first?

  Perttu

  Hey, good bonne idee idea for a feature request, please post! I know to fix a standard is auto-assumer as much as going to interpret things on a timeline, but allows wrinkles too manual and same setting manually what you want it to do period. It would be convenient in PrPro...

  Neil

• Compression of dynamic range to set audio levels of people who speak at training meetings

  I know almost nothing about audio manipulation, but I recently started recording sessions of training for my company. Some people microphones while others do not. The tool that I got is the latest version of Adobe Audition. Is it possible for me to get easily all talk at the same level, so that people don't constantly put their volume up and down while watching?

  Well, you can use the dynamic processing to equalize the levels, but according to the differences between the voices (and some with microphones, others without sounds pretty drastic), you may not be happy with the results.

  You will find the desired effects/Amplitude and Compression/Dynamics treatment effect.  I'm afraid that's not the kind of thing where you can simply call a "Preset" and make it work the first time.  You will need to set the various parameters to control the threshold and the ratio of the effect to achieve the best results.

  For quick and dirty, it might work.  However the other thing to consider is manually adjust the levels on the fly.  Using volume envelopes you can change the levels by ear to adapt each piece to sound as good as possible.  This seems tedious, but once you get your hand, you can probably do the workout together faster than real-time.

• Increasing the dynamic range

  Hello

  I read how by AutoBracketing you can get an increase in dynamic scale using Photoshop CS. Is this possible with Lightroom 2?

  Not in native mode, but LR/Enfuse plugin can help.

• How to calculate the limits of dynamic range based on a value

  Hi all, I need to create a function that accepts as parameters:
  
  Ticket_id NUMBER
  NUMBER fluctuation
  Resolution_time NUMBER
  
  For each Ticket_id, the function should calculate the Resolution_time who "go time" according to the Fluctuation_ratio.
  
  For example:
  
  Ticket_id = 12
  Fluctuation_ratio = 0.5
  Resolution_time = 1.6 (hours)
  
  The fluctuation_ratio said that the range increased by 0.5 hours each time. So in this example, it must consider lines like these:
  
  "0-0, 5 h'"
  "0,5- 1 h"
  1 to 1.5 h'
  '1.5 to 2 h'
  ..........
  
  So the function must return the string: * "1.5 to 2 h."
  
  If the fluctuation_ratio was 3, the lines had to be:
  
  "' 0 - 3 hours"
  3 6 h"
  6 9 h'
  9 12 h'
  ..........
  
  and the function should return the string: *'0 - 3: "*"
  
  Anyone know how I can achieve this? Is there an analytic function which calculate each time the lower and the upper limit of the range 'hour '?
  
  Thanks in advance, any help will be appreciated
  
  Alex

  Hello

  Here's a function that does what you requested:

  CREATE OR REPLACE FUNCTION resolution_range
  (      in_fluctuation          IN     NUMBER
  ,      in_resolution        IN     NUMBER
  )
  RETURN     VARCHAR2
  DETERMINISTIC
  IS
       low_val          NUMBER     := in_fluctuation * FLOOR ( in_resolution
                                              / NULLIF (in_fluctuation, 0)
                                       );
       return_txt     VARCHAR2 (4000) := TO_CHAR (low_val)
                            || '-'
                           || TO_CHAR (low_val + in_fluctuation)
                           || 'h';
  BEGIN
       RETURN     return_txt;
  END     resolution_range
  ;
  

  I tested it using this query:

  WITH   test_data     AS
  (
       SELECT  12 AS ticket_id, .5 AS fluctuation_ratio, 1.6 AS resolution_time     FROM dual UNION ALL
       SELECT  13,              3,                     1.6                      FROM dual
  )
  SELECT     test_data.*
  ,     resolution_range (fluctuation_ratio, resolution_time)     AS range
  FROM     test_data
  ;
  

  and got this output:

  TICKET_ID FLUCTUATION_RATIO RESOLUTION_TIME RANGE
  --------- ----------------- --------------- --------------------
         12                .5             1.6 1.5-2h
         13                 3             1.6 0-3h
  

• Limits of dynamic Calc Manager Variables

  Hello, is it possible to specify a dynamic range in the "limits" of a variable of Manager calc?  I want to do is limit a RTP for the period dimension so that a user to select from a range of forecast periods.  periods are a range of forecasts of starts by a planned start-up period and traverse December i.e. & fcstMnth:Dec.  I tried to use the range (& fcstMnth:Dec) in the specification of limits, but that has not worked.

  Thank you

  The structure of the period is standard. Periods of roll up to quarters and full year.  I see what went well, my period subvar has been the last period in a quarter, apparently when @irsiblings is used in "limits", it will not cross parents level members, in my case the quarter.  that is, if the period subvar has been set to Jan, the function returns only Jan, Feb, Mar to RTP.  I used @list(&fcstMnth:Dec) instead and it worked correctly.  Thanks for your help

• Lumetri limited exposure to 100. Anyway to extend the limit to 109?

  I've been shooting a lot on a Sony FS700 with Odyssey 7 q.  This combination allows me to improve my dynamic range by allowing me to expose up to 109 instead of limit myself to 100.

  It seems that the new Lumetri Scopes only goes to 100.  With this limitation, it was making my points strong air blown according to the scope of waveform.    I had no problems running that sequence with Magic Bullet looks with Premiere Pro CC 2014, but did not yet test looks like in 2015 from CC.  I was really hoping to get ahead of the Lumetri color Panel, but I'm afraid I'll have to stick to the Magic Bullet Looks.

  Any suggestions on making litters go to 109 rather than be limited to 100?

  Premiere Pro and the Lumetri primarily effect working in a 32-bit floating space permanently.  It is only fair, you value 8-bit view scopes.  Change this to Float.

• Question of dynamic values prompt OBIEE!

  I'm new to OBIEE. I need help, and I'm stuck in the following scenario.
  
  How can I specify a dynamic range of values to display in the dashboard line?
  I mean when the user clicks on a message of solicitation that it should be able to see certain values that need to be generated dynamically. For example, this year.
  If the user connects to today, he should be able to see the values of the year 2012, 2013 and 2014.
  If the user connects to the next year, he should be able to see the values of the year 2013, 2014 and 2015.
  
  Thanks in advance!
  Ajay.

  Hello

  Fast, select SQL is reflected in the values of choice list for the year.

  Type this in SQL results.

  SELECT "calendar". "" Calendar year "OF"SH"WHERE"calendar. " "" Calendar year "between YEAR (CURRENT_DATE) and (YEAR (CURRENT_DATE) + 3)

  Let me know if you have any questions.

  Thank you

  Ménard

  Published by: Ménard Hussain on 7 November 2012 21:19