DNG at the PSD Dynamic Range

Similar Questions

• Audio on the socket for headphones has a dynamic range very little. The music is piled up.

  Speakers of the laptop to listen to music very well. When I use the headphone music in my headphones has a dynamic range very little. The sounds of music crushed. The strong parties are limited and the soft parts are high until I can hear background noise in the recording. I've never had this problem on any other PC.

  I'm listening on iTunes, Soundforge, and any other audio program.

  I downloaded an updated version of the software for the sound card - that solved the problem.

• In the first video too dark files / how to set up the dynamic range better?

  Hello!

  To start, here's my basic/setup info:

  I am using Pro 9.2.0 (41) first build 10.0 Win, 64-bit (all updates are in Place to date,) on an i7 - 5930 K with 32 GB of RAM and GTX 770. The source of the layer footage is uncompressed AVI (captured with card HDDP Unigraf UFG-06 via the HDMI cable), 60 frames per second, with about 200 Mbit/s data rate, 12-bit, YUY2 video. I have CUDA and the problem occurs regardless of this.

  So the plot is, I'm running software on PC - 1, send the image of PC - 2 with the acquisition card, which records everything with the plug I wrote earlier. Problem is that when I copy the files to the PC-1 and import for the first, they appear darker than the real source. I tested with a test image of color, that I took a video capture card and then display and (professionally) alt-tab the original test image with the videos on a single screen. VLC video shows almost 1 = 1 with the original, but the first and all exported first lose one or two 'blocks' of dark colors and therefore lack of information.

  It must have something to do with the beach dynamic, is if he has any ideas how to change the beach on the first?

  Perttu

  Hey, good bonne idee idea for a feature request, please post! I know to fix a standard is auto-assumer as much as going to interpret things on a timeline, but allows wrinkles too manual and same setting manually what you want it to do period. It would be convenient in PrPro...

  Neil

• Apple TV 4 Dynamic Range

  There is certainly a problem with the dynamic range on the Apple TV 4.  Watching movies on iTunes, the difference between strong and soft sounds is considerably reduced. This has happened since the Apple TV 4 has been released. Yes, the setting for the dynamic range reduction is on OFF.

  As I understand it, the reason is that the Apple TV 4 manages audio decoding. There is no option to send a raw stream to an external decoder as an A / V receiver. Basically, the Apple TV 4 does a bad job at decoding.

  There is a full thread on this on MacRumors. Many people are upset.

  Apple really needs to fix this. Watch movies on the Apple TV is terrible and I started renting on Vudu movies using my Roku box because of this problem.

  < link published by host >

  The real link to the thread is here: http://forums.macrumors.com/threads/poor-dynamic-range-even-with-full-enabled.19 51471 /

• Wide dynamic range equivalent Canon?

  All, morning

  I've got a shoot tomorrow and images is going to be edited, I know the guy do a very quick turn around time and also doent have LUT packages to use. I also know he usually pulls and like dynamic range color profile (clogged not) on the C100, as it seems ok on the camera, but also gives you plenty of room to play with him at the post. What would you say was the most simular color adjustment on the FS7, I tried loads but all seem to be really flat (as slog 3) or with a little look very burned in them as rec 709 standard.

  I know, it should have read so we could create the exact appearance etc., but it does not so is not an option.

  Thanks in advance!

  Greg.

  By saying this, 8 Hypergamma is much like the WDR

• Dynamic range of exposure to t3i/600 d

  can someone help me by providing the dynamic range of exposure to t3i. (beach of the slab - exposure range the lowest and the highest in terms of f-stops for a given scene)

  See: http://www.dpreview.com/reviews/canoneos600d/12

  Their testing seems to indicate that it is about 5 stops below and 3 & 1 / 3 stops at 4 & 1 / 3 stops above (depending on whether priority has been introduced on.)

  I think that these tests JPEG (I've seen no indication of RAW and they usually go their way to make you know when they do first).  It is much more important in RAW bit depth is likely to do a little better if you RAW.

  If you shooitng anything where you are worried about the dynamic range, then you should probably shooting RAW still.

• Lack of resolution 4 K P2715Q. Change dynamic range to full

  Hello
  A few weeks ago, I bought the monitor P2715Q and now it's finally here.

  Once I turned on my computer, it automatically recognized the monitor and had 4 k resolution works just by plugging basically.

  After a few minutes, the monitor went to 'power saving mode' (who knows why! because I was surfing on the net) and could not go on.

  I rebooted the computer and the screen was on 4 k resolution as before. Tried to test the resolution on an old game and at first everything was fine. A few minutes after, the screen went black, had to close the game (by pressing a button on console - couldn't see anything). The bone was black also and still... I rebooted the computer! (message on the screen 'power saving mode')

  The second time I restarted, the display came not with the 4 k resolution, now the recommended and maximum resolution is FULLHD (1920 x 1080).

  My first thought was that the driver has been corrupted. I uninstalled the driver through the Device Manager, downloaded the latest drivers for my video card and monitor but nothing!

  I do not see the 4 k resolution

  Data sheet:
  Video card: Gefoce GTX 660; 355.82 driver version (this video card supports 4K resolutions)
  OS: Windows 7 Ultimate edition; 64-bit (SP1)
  The monitor drivers, I tried: DELL_P2715Q-MONITOR_A00 - 00_DRVR_9XV8F.exe; DELL_P2715Q-MONITOR_A00 - 00_DRVR_7XVDJ.exe
  Display port: entry CDM

  Help, please!

  I went to a local store of DELL in order to test my monitor.

  Monitor works fine now.

  The following setting did the trick (on the NVidia settings):

  Output dynamic range: full

  By default, she had limited, change it to lot of my video card could support 4 k @ 60 Hz resolution.

• Convert originals of the PSD to TIFF

  My Lightroom Catalog contains a lot of PSD files (created in older versions of Photoshop, before that TIFF was recording format by default). They have layers.

  I want to convert this PSD to TIFF files - ideally compression TIFF + ZIP, since this seems to reduce the file size quite significantly.

  Is it possible to automate this? My current workflow goes like this:

  1. Open a PSD in Photoshop
  2. File > save as, choose TIFF + ZIP
  3. Remove the PSD file.
  4. Lightroom detects that the file is missing. Choose to place on the file, select it. TIF file version, click OK.
  5. Click on confirm when prompted that file names do not match.
  6. Now, I have a. Original TIF in my catalog.

  This process requires a lot of manual work. I can automate (sort of) the PSD > conversion TIF using the Image in Photoshop processor, but:

  • Image processor allows only LZW compression, no ZIP.
  • After I deleted the. PSD, Lightroom requires me to review for each missing file and 'Search' individually - I can't do this with several files at the same time.

  Any suggestions?

  Other things I've tried:

  • Convert from Lightroom to DNG function. This eliminates my PSD layer information, so this won't work.
  • Function rename to Lightroom. I thought I could rename the. PSD files. TIF before their conversion, which avoids the manual step of having to use 'Locate' on each file. But Lightroom will not rename the files with a different file extension, so it does not work.
  • Export of Lightroom with "Add to catalogue" activated function. That's what I want either, because it exports a file with LR changes applied. I want to replace the original file with a different format, while retaining all its metadata in LR and changes in the catalog.

  Thank you!

  Sorry, I just checked Image Processor Dr.Brown Pro, and it does not ZIP "Compression of images", but with ELA ' layer of Compression, which probably won't give you a file size much smaller than the PSD with "maximize compatibility.

  You can do this with a PS Action and use a controller > Batch command allows to process a file or a folder with subfolders tree if they contain only layered PSD files.

  Create the Action

  (1) open one image PSD layered file.

  (2) to open the Actions panel and click on the "Create new Action" button, name it something like "Save as TIFF (ZIP + ZIP)" and click on the record button.

  (3) then go to file > save as > select "TIFF" Format, select the two images and ZIP compression layer, and then click OK.

  (4) hit the button "Stop Action" square. Fact!

  Automate batch processing

  1) go to file > automate > batch

  (2) select the action just created in the "Action" drop-down list if it is not already selected.

  (3) under 'Source', select the folder, or a top-level folder with subfolders that contain layerd PSD files. Also check 'Include subfolders' If you want to process subfolders.

  (4) check "Override Action" save under "orders' so that it ignores the filename and destination folder used to create the action.

  5) click OK to start the batch job. According to the number of files being processed, it may take some time to complete. TIFF files will be saved in the same folder as the PSD files.

  You will still need to find a way to synchronize settings between the PSD and TIFF LR.

• Instantly, filter, or separate the psd of crude in the catalog?

  I was very reluctant to bring the edited master PSD files in Lightroom, to the point where I regularly purge catalog those who find themselves accidentally in there.

  I am a newcomer to Lightroom, is based on a Bridge/ACR/Photoshop workflow for many years. So partly for historical reasons, raw and PSD files have distinct and very different objectives in my workflow. Previously, everything was spent by Photoshop to produce a master file, from where I have a lot then processed for a different output. I'm still about one terabyte of a value of old PSD files with layers, smart objects and whatnot. some of them very complex cases. And I still sometimes have to build complex PSDs for special purposes.

  In any case, it is the bottom. What I want is to use keywords and all the other wonderful tools in Lightroom to organize.

  But I just be able to separate DNG/NAVE of the PSD in the blink of an eye. Or filter instantly either. There is no way I can spend time looking at individual file extensions in the film to try to understand who is who. It must be clear and instant, deadlines are always tight and I'm always in a rush. Marking of color might work, but I already use for releases of debits from vs, so this isn't an option. Tracking or rating seems not quite obvious.

  So, what is the best way to deal with this? At the moment I have them in separate directories, but it becomes more and more complex and confusing. Soon, I need to clean and put everything in a single catalog in Lightroom.

  If you simply cannot filter by file type or create smart collections with a status of file type?

• LabVIEW 2015, select data in the Excel worksheet range.

  Hi, guys.

  I have a question about deal with the data in Excel,

  I determine the address of the two (for example A1, C20) cell, and then select the data (for example, in A1 to A20 and C1 to C20) to other leaves (or table).

  THX.

  There is no need to import the value of range for LabVIEW and then to write this back to Excel, if you use the Range.Copy method. Here's how to use this method (I used the screws GTA to open Excel and to get the Excel.Application ActiveX reference, it was faster to validate the code of interest)

  Ben64

  

• Can I still use my PCI-4351 for readings of tc type t, even if the unit is out of tolerance in the +/-2 .5V range?

  Hello

  I use a PCI-4351 for readings of TC type T, and after receiving it back from calibration, the 2.5V range came out by - 0.00003 V.  The rest of the calibration is within the tolerance.  Please tell us if the 2.5V range is used for playback of the thermocouple type T with the accessory CB - 68 t.  From my understanding, I don't think that the 0.625V beach is used for measurements of TC, and they all calibration.

  Thank you for your help.

  Michael Carter

  Hi Michael,

  You're right that you'll only need the gamme.625 for this measure.

  I am very disappointed to hear that your device was not properly calibrated.  It was our calibration?  If it were, I can try to you allow to send to us or something like that to remedy this situation.

  If there is anything else I can do to help correct this problem please let me know.

• When you try to load a game on the Internet I get this error - entry point decode pointer could not be located in the Library dynamic link kernel32.dl

  Original title: need help please

  Please help me I've tried for hours just can't find it try to load the game from the internet charge just before its opening, he said
  error entry point decode pointer could not be located in the Library dynamic link kernel32.dll also tried to download directx said same thing for me
  Please help me thanks
  p

  Hello

  I suggest you try to run the System File Checker
  http://support.Microsoft.com/kb/310747

  It will be useful.

• Configure the input voltage range

  I use an NI USB-6221 with SignalExpress 3.0 card.

  The Spec for the 6221 map specifies 4 analog input ranges of +/-10V, 5, 1, & 0.2.

  My question, how is the range of input voltage on the map on one of the beaches specified?

  The closest thing I can find in SignalExpress is step 'DAQmx aquire', looking at the tab "configuration" of "Configuring the stage." There is a group called 'settings', there are areas of maximum and minimum input Signal, but context-sensitive help indicates that it is expected for the channel after the scaling values.

  I also looked into MAX, but I see no way for me to directly configure one of these ranges.

  Can someone explain how this works?

  Mike

  You look at the right thing. When you specify the min and max, the DAQmx driver and then automatically selects the best range of this signal. For example, the Council supports + /. 1 + /-1, at ± 5 and ± varies from 10 volts and a jury of 12 bits. If you enter max/min to + /-2, the jury will be set to the +/-5 volt range. Your resolution is then 10 (oscillation of the total voltage) volts divided by 4096 (2 * 12).

  If you were using LabVIEW, you can get the actual voltage selected range by using channel properties DAQmx AI. Rng.High and I. Rng.Low. If you specify a min and max that is less than the amplitude of the real signal is greater than the actual scale used, then you cut your input signal. DAQmx does not have an autoscale. Take a look at Page 4-2 in the Manual of the M series.

• ADAPTER DOUBLE BAND ONLY SHOW THE 2 GHZ RANGE, HAVE LOST 5 GHZ BUT PRESENT ON ALL OTHER PCS

  I inadvertently "REMOVED" the recognition of 'network' of 5 ghz on a menu that allowed me to "remove unnecessary networks."  I thought I was doing the right thing, but deleted by mistake the 5 ghz. Now I just can't side 5 ghz of the card to show as an available network when I click available networks at the bottom right of my screen.

  My dual band router LInksys is certainly put 2 and 5 ghz because I can see them on other PCs in the House and my Iphone6. It's only the HP All In One which now lacks the recognition of 5 ghz.

  It was working fine before my despicable act. I could easily switch between 2 ghz or 5 ghz...

  I rebooted router and reset I can see the 'admin' menu for the router on this computer.  I restarted my HP. I tried to restore my pc soon, and no effect. It seems that somehow I just simply deleted a vital statement or turned a vital switch that prevent this receiver WiFi HP-receive adapter or by switching to the 5 ghz range and the value by default only the 2 ghz.

  My system details also show that it is a working adapter RALink 3290 80211 bgn

  Is there a way to turn this back on? How do I re - establish the 5 ghz network on this HP?

  Any help out there?

  George P

  You are the very welcome.

  That is right.  No 'a' doesn't = No 5 GHz.

  I can't explain why you thought you saw other 5 GHz networks on your PC.

  The only wireless networks that should be visible on your PC are only in the 2.4 GHz band, because it's all Ralink card in your model can see.

  You might be able to replace the card with a wireless card dual band but I can't say for sure.  Some PC have a BIOS lock that prevents users from installing a different wireless card.

  You would have to make sure your PC has two antennas connected to the current Ralink wireless card because all dual-band cards have at least two terminals of the antenna to connect to.

  I would say the best thing you can do would be to go to your local office supply store and pick up a wireless network adapter dual band USB external.

  They now power USB wireless adapters, so you can get one of these.

  You wouldn't have any compatibility or hardware issues with an external USB card and not worry about BIOS locks or the number of antennas inside your PC.

• Layout and properties on the created dynamically containers

  I want to show multiple rows of tiles (3 x 2 on portrait, 2 x 3 on the landscape or square screen).

  I have a ComponentDefintion for a line which is a container with StackLayout LeftToRight. To this, I add the tiles.

  And the ComponentDefintion of the slab:

  ComponentDefinition {
    id: tileDefinition
    Container {
       id: tileContainer
       property string imagePath
       property string hexColor
       onHexColorChanged: {
         background = Color.create(hexColor);
       }
       leftPadding: 15
       Container {
         layout: DockLayout {
       }
       ImageView {
         imageSource: tileContainer.imagePath
         id: tileImageView
         verticalAlignment: VerticalAlignment.Center
         horizontalAlignment: HorizontalAlignment.Center
       }
     }
    }
  }
  

  the container is created correctly, but the background and the value of the image.

  However, the leftPaddig is ignored, and the imageview is not centered.

  Quite strange, the line has 15 topPadding displayed correctly.

  I tried to define the available dynamically using a DockLayout ComponentDefinition, but that is not the case.

  Any ideas how to get the centered image and the successfully added leftPadding?

  I solved the problem, the layout works very well if I give the outside container size by first using HorizontalAlignment.Fill, VerticalAlignment.Fill and StackLayoutProperties with spaceQuota: 1.0

  the QML are sometimes mysterious