Dynamic stamp will not be printed in hard copy

Similar Questions

• HP psc2100 series all-in-one: printer was working fine, all of a sudden its impasse on copy and will not be printed said export error

  computer printing problem saying "Error exporting" and printer saying just 1 copy.  I tried troubleshooting on mine, doesn't have the verified maintenance on the printer, but still saying error. Help, please!

  Hi @kelley22,

  Welcome to the HP Forums!

  I see that your HP PSC 2100 printer is stuck on copy and will not be printed on Windows 8. I'm happy to help you!

  The first step, I would like to recommend is a hard reset. Please see this message, How to perform a hard reset, by @Rich1. It is very important that the power cable from the printer is plugged directly into the wall outlet, not a surge protector. See this article, questions when it is connected to an uninterruptible power supply/Strip/surge protector power, for more information. This is true for printers and ink jet.

  Once this step is finished, please try to print a self-test report, to check the printer hardware is fully functional.

  To print a self-test report, follow these steps:

  • On the product control panel, press Setup.
    The installation menu appears.
  • Press the right arrow ( ) until print report displays and then press OK. The menu print report appears.
  • Press the right arrow ( ) until the self-assessment report and press OK. The self-test report prints.

  If the test report print, then on the computer, please try our HP print and Scan Doctorand let me know what happens!

  Hope this helps and have a great day!

  "Please click the Thumbs up icon below to thank me for having responded."

• LR will not be printed. No Source file?

  I try to print in LR 5.7.1. I get a msg saying "image is not a source file and will not be printed. Images downloaded from card camera on LR and exported to the hard drive. What I'm missing here?

  PSD files should work with Lightroom. You may need to check the compatibility option expand. In General, I don't work with PSD files. I work with raw and TIF files.

• Just upgraded to El Capitan. Now my MF4350 (USB) will not be printed. He maintains a break himself. I have tried reboot, power, re - install drivers, etc.. Suggestions?

  Just upgraded my MacBook OS to El Capitan, 10.11.3 iOS 2009. Now my Canon MF4350's (USB connection) will not be printed. When I try to print, it says 'Printing' and turns then to ' break. "It scans fine, using the MF Toolbox.  I have tried rebooting, disconnect and reconnect the printer, turn on and turn off and I have uninstalled and reinstalled the drivers, etc. An other all-in-one (brother), I have at home will work as before my upgrade. My other apps seem to work normally, Suggestions?

  Adding the printer screen says UFRII LT.

• HP dv7 will not recognize the second hard drive

  My HP dv7-2185dx running Windows 7 will not recognize the second hard drive, bios recognizes this Intel Rapid storage acknowledges.

  Main hard drive is a 1 to install a second hard drive to 500 GB.

  Hello

  Try the following.

  Judgment of the laptop and unplug the 2nd HARD drive.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  When windows has reloaded, download and reinstall the Chipset driver at the following link.

  Chipset Driver - Windows 7.

  When this is finished, stop the laptop.

  Reconnect the 2nd HARD drive, then start Notepad and let Windows take over completely for a few minutes before checking if the reader appears in the lower part of the disk management window.

  Kind regards

  DP - K

• HP Pavilion: spooler will not delete print jobs

  Printer spooler will not delete print jobs.  The status is: Error - sent to the printer.  Canon has tried to help by using several methods to remove print jobs in the spooler.  None of them worked.  What I can do next.  Thank you

  Hello

  Please click HERE to access the procedure which should solve the problem.

• my printer is working, but it will not be printed in color and a new color cartridge is installed.

  HP Deskjet D4160 printer with the Windows XP computer. My printer is working, but it will not be printed in color and a new color cartridge is installed - what can I do?

  The steps in this troubleshooting page can help solve the problem.

• Windows email will not be printed and give this message "email error unexpected call to the method"

  Windows email will not be printed and give this message "email error unexpected call to the method"

  is there a solution for this?

  Yes, I uninstalled the upgrade to IE9 and rebooted and unfortunately I can print my email again! No more unexpected call to the method.  Check my IE and it's IE8.

  Problem solved!

  Thanks for the replies.
  Neal

• LaserJet Professional P 1102w printer green light blinking, but will not be printed

  I had my P of professional LaserJet 1102w for a little less than a year.  I use it very rarely and very slightly (I've probably printed total less than 25 pages).  It has always worked well.

  But in the last 2 weeks, it stopped printing.  The Green led comes on, but it will not be printed.

  I went through the troubleshooting diagnostic tests on my computer (HP Pavilion, Windows 7 operating system).  The result shows that my computer detects a problem, but it cannot identify it (for example, no paper jam, no toner, etc..).  I manually checked it for a paper jam too.  I have not seen any problems.  I turned off, unplugged, he turned his back.  She still does not print.  And now the green light blinks, even if I turn it off several hours ago.

  Help, please.  Thank you.

  Update: I realized what it was.  My USB cable was very slightly loose.  I don't see when I checked manually the printer the first time.  But I checked a second time and just pushed him tighter.  Problem solved.

• I have a 7410 all-in-one printer. Is power on but it will not be printed.

  I have a 7410 all-in-one printer, the power is the printer turns on, but when I push the printer button on the light does not come on and it will not be printed. Is there a reset somewhere button? Any suggestions

  This is usually caused by a failure of the wireless LAN card.  You can solve this problem, as shown on this page.  Unplug the connector on the wireless card will disable wireless and correct the problem.  Since you're using USB shouldn't be a problem.

• My refuses to officepro 8000 wireless to wireless. Today, he doesn't will not even print at all. Help!

  I have had this printer for some time - he gave me hours of grief. Island only way we could use it was like a device fully connected by USB.

  Yesterday I finally managed to do what it is supposed to be: a wireless printer, so that the family do not come to me to print. Today there tell me that it is offline, disconnected, is found on the network. I am so sick of trying to probe on its depths. I have a suspicion that it's to do with IP addresses or some sort of internal conflict - possibly as a result of a previous effort when installing wireless.

  Someone at - he of the clues as to what I can do to sort out this mess? It will not even print me a test page now...

  Try here for help.

  Printer does not keep the wireless connection.

  http://support.HP.com/us-en/document/c02817031

• How can I get my HP PSC1510xi printer to connect to my Windows 7 computer? It will not be printed.

  How can I get my HP PSC1510xi printer to connect to my Windows 7 computer? It will not be printed.

  As far as I know, the series HP PSC1510 connect only via USB.

  What happens when you connect the printer to your computer?

  You have installed the software from the CD that came with the printer?

  Are all the lights on the printer lit or flashing?  Please describe.

  You can print a test page by following the instructions on one of the following videos?

  https://youtu.be/j-DIEhmuDvs

  https://youtu.be/T2jpGhvGpmg

• LaserJet P1505n - "printer off-line" message and will not be printed

  I use MAC OS 10.8.4. connected to the printer via the ethernet connection

  Have had on and outside messages as the "printer is not connected" and it will not be printed. Sometimes, I can't print a day and may the next day.  All connections are correct.

  I followed the suggestion online HPs and deleted the name of the printer in system preferences - print and scan. Turned things market according to the guidelines. Supposedly I should be able to add the printer, but it will not be displayed in the list of printers. Cannot reinstall from the disc because there has been updates.

  Now am stuck with how to make it work again.

  Thanks - I can try your suggestions. The firewall is all that came with my iMac and has never been a problem before and I made no changes to it recently.

  Before I try something that will help me get the printer displayed in the selection list so I can add it to my System Prefs?

  Is it possible download the drivers from the HP website?

• Upgrade installation will not work after replaced hard drive

  Have a HP machine that came with Vista. Bought an upgrade to Windows 7. Ran fine for several months. Then the hard drive failed. Installed a new hard drive. Partitioned and formatted. Windows 7 upgrade will not install. The only copy of Vista was on the hard drive crashed. A way to force the update to install. I have the license keys and the legal copies - simply nothing to install the first. Any help would be great.

  If your computer comes with a qualifying previous license such as Windows Vista or Windows XP and the certificate of authenticity is still attached to the machine in good condition, then the COST is reason enough to represent the compliance to the software license agreement. No previous required software installation, which means you can do a clean install with Windows 7 Upgrade disk.

  How to do a clean install with upgrade disc:

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

• I try to install my Canon imageclass d320 Painter on my new computer windows 8. It will not be printed

  It seems that the printer is configured in the system ok, but it will not be printed.  Documents in the queue in the print spooler, but won't print.

  Hi Eric,.

  It seems that you need help to solve the problem of the printer's performance. Please respond to the suite, which will help us to help you in the right direction.

  1. What's wired or wireless printer?
  2. Do you have an error message?

  You can check the link followiing, steps, designed to help you identify and fix common printer problems in Windows, including print errors, print spooler errors, and other issues that could prevent you from printing.

  Solve printer problems.

  https://Cat.Microsoft.com/ticket.aspx?ID=1510862&threadintid=1510862&forumid=5&ThreadId=c09d8743-40F7-40AA-AFF5-d1ab3d6cec0b

  You can download the latest driver from the following link.

  Canon imageclass d320.

  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/imageclass_series/imageclass_d320#DriversAndSoftware

  Hope this helps