LR will not be printed. No Source file?

Similar Questions

• PDF will not be printed. I wonder save. Then the document is saved as a file .prn, but still feel used?

  PDF will not be printed. I wonder save. Then the document is saved as a file .prn, but still feel used?

  In the print options of drive that appear (or perhaps on an Advanced button) there is a choice "print to file". Somehow this has been activated. Turn it back on, and all should be well.

• Epson Workforce 645 appears as the default on my computer and it says 'ready', but it will not be printed.

  Original title: printing problems

  I am facing a problem with the printer - or maybe a computer problem.  I can't pinpoint the problem.  My printer (Epson Workforce 645) appears as the default on my computer, and it says 'ready', but it will not be printed.  My documents will in Quebec, but after about 30 seconds, the State spends printing, error.  I've tried everything.  (Occasionally), it will display a test page.    Any ideas?

  Hi Julia,

   

  Thanks for posting the question in the Microsoft Community!

   

  You are unable to print and get the error message.

   

  I imagine the frustration you feel when you are unable to print.

  This can happen due to connection problems, malicious content or third-party programs.

   

  1 have you tried all the Troubleshooting steps?

  2 is the computer, or a printer attached to a domain network?

  3. are you able to print from Notepad?

  4. what documents do you speak?

  5 is the full error message?

   

  To check if it's because of connection problems malware content follow the steps mentioned below:

   

  Method 1: Run the troubleshooter

   

  See the site:

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-in/Windows7/open-the-printer-Troubleshooter

   

  Method 2: Scan the computer to remove all possible malicious content

  See the site:

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx .

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 3: Clean boot

   

  When the computer starts to boot, programs non-Microsoft will not be started and would avoid any interruption of their share.

  See the site:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135 .

   

  Note: once you are done with the boot, follow step 3 in the article to restore your computer to normal startup.

   

  Note: If in case you are connected through a wireless connection and then when you start the System Configuration utility to perform the clean boot, click Startup and Services tab one time and check see topic wireless are turned on (Enabled).

   

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

• Dynamic stamp will not be printed in hard copy

  Dynamic stamp will not be printed in hard copy

  Hi carterr29089433,

  Make sure that you have selected 'Document & annotations' in the print dialogue box just print the file.

  

  It it does not work, try to print as image Quick fix | Print PDFS into image. Acrobat, Reader.

  Kind regards
  Nicos

• In windows Vista 32-bit, printing .pdf save as .prn - pdf will not be printed, why?

  I am running Windows Vista 32 bit and when you try to print a .pdf file, it will not be printed, but I get the prompt to save it to a .prn file.  Never had a problem printing before Adobe .pdf.  How can I solve this?

  Disable the option "print to file".

• Just upgraded to El Capitan. Now my MF4350 (USB) will not be printed. He maintains a break himself. I have tried reboot, power, re - install drivers, etc.. Suggestions?

  Just upgraded my MacBook OS to El Capitan, 10.11.3 iOS 2009. Now my Canon MF4350's (USB connection) will not be printed. When I try to print, it says 'Printing' and turns then to ' break. "It scans fine, using the MF Toolbox.  I have tried rebooting, disconnect and reconnect the printer, turn on and turn off and I have uninstalled and reinstalled the drivers, etc. An other all-in-one (brother), I have at home will work as before my upgrade. My other apps seem to work normally, Suggestions?

  Adding the printer screen says UFRII LT.

• HP Pavilion: spooler will not delete print jobs

  Printer spooler will not delete print jobs.  The status is: Error - sent to the printer.  Canon has tried to help by using several methods to remove print jobs in the spooler.  None of them worked.  What I can do next.  Thank you

  Hello

  Please click HERE to access the procedure which should solve the problem.

• When I go to my computer, then program files it will not show me the exe files

  When I go to my computer, then program files, that he will not show me the exe files, that told me what to do not have full administrator control, when I go to the page showing which is the administatrator he show me has a control total why he let me not see the exe files, it also leaves me not so far closed for my dvd writer dishes?

  Try Control Panel, user accounts, click the account, make sure that its listed as 'administrator '.

  close. Then, in control - panel.open 'Options records' stand & check the box 'Show hidden '.

  files & folders", uncheck uncheck them next box"Hide extensions"next"Hide protected. "

  files/folders", nearby... This you gives access, however, once youre thru with youre editing

  or see the files/folders, you must restore default in 'Folder Options '...

• my printer is working, but it will not be printed in color and a new color cartridge is installed.

  HP Deskjet D4160 printer with the Windows XP computer. My printer is working, but it will not be printed in color and a new color cartridge is installed - what can I do?

  The steps in this troubleshooting page can help solve the problem.

• HP psc2100 series all-in-one: printer was working fine, all of a sudden its impasse on copy and will not be printed said export error

  computer printing problem saying "Error exporting" and printer saying just 1 copy.  I tried troubleshooting on mine, doesn't have the verified maintenance on the printer, but still saying error. Help, please!

  Hi @kelley22,

  Welcome to the HP Forums!

  I see that your HP PSC 2100 printer is stuck on copy and will not be printed on Windows 8. I'm happy to help you!

  The first step, I would like to recommend is a hard reset. Please see this message, How to perform a hard reset, by @Rich1. It is very important that the power cable from the printer is plugged directly into the wall outlet, not a surge protector. See this article, questions when it is connected to an uninterruptible power supply/Strip/surge protector power, for more information. This is true for printers and ink jet.

  Once this step is finished, please try to print a self-test report, to check the printer hardware is fully functional.

  To print a self-test report, follow these steps:

  • On the product control panel, press Setup.
    The installation menu appears.
  • Press the right arrow ( ) until print report displays and then press OK. The menu print report appears.
  • Press the right arrow ( ) until the self-assessment report and press OK. The self-test report prints.

  If the test report print, then on the computer, please try our HP print and Scan Doctorand let me know what happens!

  Hope this helps and have a great day!

  "Please click the Thumbs up icon below to thank me for having responded."

• Windows email will not be printed and give this message "email error unexpected call to the method"

  Windows email will not be printed and give this message "email error unexpected call to the method"

  is there a solution for this?

  Yes, I uninstalled the upgrade to IE9 and rebooted and unfortunately I can print my email again! No more unexpected call to the method.  Check my IE and it's IE8.

  Problem solved!

  Thanks for the replies.
  Neal

• LaserJet Professional P 1102w printer green light blinking, but will not be printed

  I had my P of professional LaserJet 1102w for a little less than a year.  I use it very rarely and very slightly (I've probably printed total less than 25 pages).  It has always worked well.

  But in the last 2 weeks, it stopped printing.  The Green led comes on, but it will not be printed.

  I went through the troubleshooting diagnostic tests on my computer (HP Pavilion, Windows 7 operating system).  The result shows that my computer detects a problem, but it cannot identify it (for example, no paper jam, no toner, etc..).  I manually checked it for a paper jam too.  I have not seen any problems.  I turned off, unplugged, he turned his back.  She still does not print.  And now the green light blinks, even if I turn it off several hours ago.

  Help, please.  Thank you.

  Update: I realized what it was.  My USB cable was very slightly loose.  I don't see when I checked manually the printer the first time.  But I checked a second time and just pushed him tighter.  Problem solved.

• I have a 7410 all-in-one printer. Is power on but it will not be printed.

  I have a 7410 all-in-one printer, the power is the printer turns on, but when I push the printer button on the light does not come on and it will not be printed. Is there a reset somewhere button? Any suggestions

  This is usually caused by a failure of the wireless LAN card.  You can solve this problem, as shown on this page.  Unplug the connector on the wireless card will disable wireless and correct the problem.  Since you're using USB shouldn't be a problem.

• My refuses to officepro 8000 wireless to wireless. Today, he doesn't will not even print at all. Help!

  I have had this printer for some time - he gave me hours of grief. Island only way we could use it was like a device fully connected by USB.

  Yesterday I finally managed to do what it is supposed to be: a wireless printer, so that the family do not come to me to print. Today there tell me that it is offline, disconnected, is found on the network. I am so sick of trying to probe on its depths. I have a suspicion that it's to do with IP addresses or some sort of internal conflict - possibly as a result of a previous effort when installing wireless.

  Someone at - he of the clues as to what I can do to sort out this mess? It will not even print me a test page now...

  Try here for help.

  Printer does not keep the wireless connection.

  http://support.HP.com/us-en/document/c02817031

• Vista will not display description of the file on mouse over. File name, Type, size, and Date modified see the upward, but no description.

  Vista will not display description of the file on mouse over. When I mouse over, a pop-up window displays showing: file name, Type, size and Date of change, however, it does not show the description of the file.

  So, for example if I have 5 files on different types of screw - the description tells me that the size of the screws. IE. 1.5 mm or 1. 8 mm.

  Update: try to get the description of the file displayed messing around in the file properties, now out of 10 records, only 2 includes the name of the file in the mice on the pop-up window. So now what lack us, it's the file name and the Description file.
  Help, please...

  Description of the file in as long as this is not one of the available variables, which can be shown with ToolTips - but there are others who could easily serve the same purpose. Here are the options:

  Consulted
  Attributes
  Created
  DocAuthor
  DocComments
  DocSubject
  DocTitle
  Modified
  Name
  Size
  Type
  To write

  Here is an article on how to change what is shown. http://www.ghacks.net/2008/02/10/customize-windows-explorer-tooltips/ . It is to change the registry, make sure you so first back it up before doing anything so that you can recover in case you make a mistake (or do the right thing, but it does not work as expected). http://www.instant-registry-fixes.org/how-to-backup-windows-vista-registry/ .

  I hope this helps.

  Good luck! Lorien - MCSA/MCSE/network + / A +.