My refuses to officepro 8000 wireless to wireless. Today, he doesn't will not even print at all. Help!

Similar Questions

• DeskJet F4580 wireless light flashing. Laptop will not find printer.

  I have the above printer connected via USB to my desktop (Win Vista 32-bit) and has previously been connected to my laptop HP Pavilion dm3 (Win 7 64 bit) wireless - everything was going well for 12 months. I recently had infinite BT (optical fiber) broadband installed and still flashes the light on the printer wireless and the laptop computer does not find the printer.

  I tried re-installing the printer (I think) by pressing the button and then pressing the button of the modem WPS wireless. Still getting flashing blue. What can I do?

  Thank you

  Hi Jan1973,

  Follow the steps outlined in the document below.

  Installation of the software of the printer on a wireless network

• HP Officejet Pro 8000 Wireless will not be printed with the iPhone 5 s

  This printer as wireless that I bought used printing with IPhone or iPad in 2011 because is not on the list of Air printing devices so I was told by HP to buy a new and as it was not equipped "Eprint" HP app which is there to deal with it will not work. I was talking to sales person to avoid paying, but I can't believe this. There are printers better but makes no cela a throw away. and who wants to buy a wireless printer that used to print wirelessly? Help!

  Hi Hank, there.

  Sorry to hear that you are having a rough go with the printer.

  With respect to the 8000 wireless, I guess you've got a newbie on the phone tech rep. I couldn't understand why they said there is no work around, because I was able to get the older printers with HP troubleshooting documents. Some so that might help:

  1. install the printer on your network (if it isn't already) the software of the printer for a wireless network connection

  2. download the HP Mobile E-Print app for iOS. It should still work with non-eprint printers: https://itunes.apple.com/ca/app/hp-eprint/id299531647?mt=8

  3 take a look at this video tutorial for tips on getting started: http://www.youtube.com/watch?v=l1z1pSC8WHI

  Hope this helps

• Wireless, Satellite A500-17 x will not work

  Hello

  Bit of an issue, the wireless on my laptop will not work. It is certainly a problem with the laptop itself, the router etc are all fine. I can connect to the internet with a cable, but Wireless does just not all. The switch on the front of the laptop, which should turn the radio power, has no effect. Before this problem of switching on the position 'on' would cause icon connection Wireless next to the switch to light up, it's no longer the case. Furthermore, when I tried to check the drivers in Device Manager there are only one option under "Network adapters", which is the "Realtek PCIe GBE Family Controller. Right click and select "update driver software...". ' result in a message saying that the proper drivers are installed. I don't know, but I suspect that there may be a lack of adapter or something?

  Any help much appreciated.

  Maybe some unknown device appears in Device Manager?

  You should have 2 entries for network adapters. One for the LAN and the other for the WLAN.

  By the way: when you set switch WLAN on WE and when you use FN + F8 what happens exactly?

• WAG54GS allows wireless clients to connect but will not assign IP addresses for full connectivity

  I have three XP 3 computers connected between them in a MS home network via a wired hub and access to the internet through a wired connection to a router WAG54GS.  DHCP is enabled on the router, the IP addresses are correctly assigned and internet access to these computers Wired is not a problem.

  In the past, I've connected also with success of laptops to the internet via the feature wireless router, but having not used that for a while, I think now it will not work.  I tried to connect with laptop computers running XP 2 and Vista Home and the problem is the same.  Laptops find broadcasting wireless router and connect but they are not assigned IP addresses during the phase of "Acquiring IP address" resulting in a "Limited or no connectivity message."  Packets are sent to the router, but none are received in return. It is with the strength of the Signal at 73% and the quality of the link to 100%.  Ipconfig displays no deafult assigned gateway and the IP auto configured to be 169.254.96.1 for example.  Ping the router gives "Destination host unreachable".  Not surprisingly, laptops are able to 'see' other computers wired on the MS. network  These laptops connect correctly to the MS network and internet if I change the wired connection.

  If I check the status of the network wireless router configuration good laptops MAC addresses are displayed, but the computer name and the IP address are missing.  I usually use a protection WEP 128 bit on two channels 6 and 13, but it makes no difference if I change this without guarantee, once again the connection occurs, but no IP address is assigned.  DHCP is enabled in the tab for basic configuration of router from 192.168.1.100 with selected up to 50 users DHCP (and DHCP works very well for cable customers).  The IP address of the router is set to 192.168.1.2.  Wi - Fi router is set to "allow everything".  Default settings are used for the parameters wireless advanced, although I tried to reduce the 100 interbval tag at 50 and the RTS and Fragmentation threshold to 2304.  The policy of Internet access on the router is disabled.

  If I have (for purposes of testing only) connect laptops to one of my neighbors secure networks (there are several) to connect laptops very well so I can access the internet, DHCP works great on laptops.  Firmware is v1.00.08 (I looked this modernization, but while I can identify my router version 1.2 downloads talk about types of Annex A and Annex B are mutually exclusive and I'm not clear I have.  I am also doubtful as to if the firmware upgrade would make a difference, because there is no trace of the upgrade solve this kind of problem and I had the Wireless does not work if long ago).  I'm running out of ideas, is there something that I missed?

  Well in this case you can try to upgrade the firmware of your router, go to the website http://www.linksysbycisco.com/UK/en/support/WAG54GS/download...insert of your router model serach tab... select the correct version of your router... Download the firmware file... save this file on the desktop.

  Follow these steps to upgrade the firmware of the device: -.
  Open a page in Internet Explorer browser on a computer hard wired to the router...
  In the address bar type - 192.168.1.1... Leave the name blank username & password use admin lowercase...
  Click the 'Administration' tab - then click on the 'Upgrade Firmware' under the tab-here, click on 'Browse' and navigate the .bin firmware file and click on "Upgrade"...
  Wait a few seconds until it shows that "the update is successful," after the upgrade of the firmware, click on "Reboot" and you will be returned to the same page OR it will say 'cannot display the Page.

  Now reset your router:
  Press and hold the button of reset for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...

  Once you re-configured settings of your router, and you are able to go online Wired computer, here are some settings that you can configure your wireless router, I think this might solve your problem

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1
  Let the empty user name & password use admin lowercase...
  For wireless settings, follow these steps: -.
  Click on the Wireless tab
  -Here, select manual configuration... Wireless network mode must be mixed...
  -Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors...

  -Set the Standard - 20 MHz Radio band and change the Standard channel to 11-2, 462 GHz... Wireless SSID broadcast should be enabled and then click on save settings...
  Please take note of the name of the wireless network (SSID) because it's the network identifier...
  For wireless security: -.
  Click the sub-tab under wireless > Wireless Security...
  Change the mode of WEP wireless security, encryption must be 64-bit. Let the empty password, do not type in anything... Under type of WEP Key 1 in all 10 numbers please (numbers only and no mailbox for example: your 10-digit phone number) and click on save settings... Please note the 1 WEP key as it comes to the security key for the wireless network...

  Click the settings advanced wireless
  Change the interval of tag to 75 > change the Fragmentation threshold to 2304, change the RTS threshold to 2304 > click 'save settings '...
  Now let's see if you can locate your wireless network and try to connect... And check if you are able to navigate.

• CM1415fnw ctrl panel will not allowing printing wireless (wifi) when you are connected to wired ethernet

  Panel Display control for CM1415fnw says that it will not allow for wireless (WiFi) network card while connected to the wired Ethernet cable.  Was able to get the printer to activate the network WiFi once the Ethernet cable has been disconnected. and there he has disabled the connection once again Ethernet has been reconnected.

  How this printer can be configured to allow both wireless and wired print 802.11?

  Thank you.

  Hi CM1415fnw_help,

  You can't the connected printer Ethernet & Wireless at the same time. The only option is to connect the printer USB & Ethernet or USB & wireless. It is not possible to have two networks connected at the same time. Let me know if you need help.

• I have a printer wireless (HP5510) and it will not be printed. When I hit print a document, it takes me to a 'save the document.

  I have a printerHP5510 wireless).  When I go to print a document, need me a "save document area.  How can I get it to print?

  Hello

  I realize has the inconvenience that you are experiencing with your printer. I will certainly help you to question.

  I would like to know some information:

  1. Are you facing problems printing from a web browser or a document on your PC?

  2. You use an Antivirus/security software?

  3. You did changes to the hardware/software before this problem?

  I suggest you refer to the link below ad see if it helps:

  Solve printer problems

  You can also download the latest version of the software driver for your printer from the link below and check if this is useful:

  HP Photosmart 5510 e - all-in - One Printer - B111a

  For more information, you can also check out the link below:

  Updated a hardware driver that is not working properly

  Automatically get recommended drivers and updates for your hardware

  Hope this information helps.

  Please get back to us with an update on the issue, we will be happy to help you.

  Thank you to provide us with the information to look for more on this subject and to better understand the issue and we will be happy to offer our help.

  Thank you.

• Portable remote will not be printed in the new HP4622 wireless printer

  My new HP 4622 print cellphone woman (Compaq Presario CQ-60-224NR w / Windows Vista) in another part of the House on my Centurylink DSL home network with very good connectivity.  I have the printer installed to my office (gateway Microsoft XP SP3) and it prints fine from the office.  Is the printing software must also be installed on the laptop?  I sent a .jpg file to the printer from the laptop and it printed a single line in unicode? code per page until I cancel the job from the print queue. I went through the installation guide a couple of times and nothing is fixed.  Test results say that everything going and installation is successful.  I downloaded and tried the impression of physician assistant, and he said no problem found.  I had McAfee total protection, could there be a firewall issue?  I don't know about the activation of ports or that sort of thing.  I spilled a Lexmark X 7170 perfectly good all-in-one, because it was not wireless and we couldn't set up for print-to-peer.  Now I have a new wireless printer and subsequently to go to print remotely either.  Hope you can help.  Let me know if you need more information.  Thank you.

  Hi Ken,

  It seems that the system restarts erased all your duplicate entries.

  The HP 4622 and 4622 FAX are the drivers, you need to be running. Microsoft Image Writer and XPS Document Writer are installed by default by Windows, you can ignore these.

  You should be good to go.

  If I have solved your problem, say thank you by clicking on the laurels! stars on the left, or click on the button accept as a Solution.

• Wireless card detects WLan but will not connect to them - Satellite U300-111

  Hi all

  I'm in a mixture with a problem which I hope I could get a help from you all.

  My problem is that my wireless card detects networks wireless next to my laptop but when I try to connect to one that it doesn't connect at all. Even to my own wireless network.
  There is nothing wrong with my wireless network I got connected and tested several devices wireless Conect to it.

  Hopeing to get some sometimes you all on how to solve this problem.

  MY LAPTOP IS A TOSHIBA SATELLITE U300-111
  BOUGHT IN THE MIDDLE EAST
  MY WIRELESS CARD IS: INTEL (R) WIRELESS WIFI LINK 4965AGN
  THE DRIVER VERSION IS: 12.0.0.73
  WINDOWS VISTA 32 BIT
  SERVICE PACK 1

  Thank you

  H

  Reboot the router and try to establish connectivity again.

• Satellite L450D-13 x - lost wireless connection and will not sign up to all the

  I have a Satellite L450D - 13 X, I was able to use the wireless until today where it has stopped working. No matter what I do, it says that the wireless device is disabled.
  I tried to update and diagnoses, but they all come back fine.

  Can anyone help?

  Try to restore OS to an earlier time using System Restore tool. Maybe some update Microsoft screwed up the WLAN functionality. Very often the driver WLAN is displayed as an option to update.

  Try this as the first step.
  Also try restarting your router.

• When I try to connect to the wireless router, it asks you the password I put it and he then asked again and will not accept the password. all other computers (without windows 7) connect correctly.

  My new computer has windows 7 when I try to connect it to my router it ask the password, then he asks the network password I put in the same password and it does not accept it. I spent ove an hour on the phone with a very helpful and confused expert to the Virgin. He tells me that the password only I need to communicate with the router is the main. We tried a lot of things all very technical and finally he gave up. Other computers with vista on connect very well with no problems at all.

  The network is fine and all the settings are fine. Occasionally, it connects via a home network but then it stops. When I try to communicate with the printer wireless signal stops and starts.

  I don't hold much hope of a response that experts were left very confused by this first abandoned after 45 minutes and the second lastered over an hour are totally flumaxed and blame windows 7

  But everyone told me that windows 7 was supposed to be the best

  Your post has nothing to do with the Windows Update feature (compared to the upgrade of Windows). Please repost it here for assistance: http://social.answers.microsoft.com/Forums/en-US/w7network/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Have HP Photosmart b110 all in one series connected to my pc wireless, but it will not be printed

  Hi I have a series of all-in-one hp photosmart b110 it is connected to my wireless pc but it wont print I tried for days now, please can anyone help thanks

  Hi pauloldfield

  1. do you have the updated drivers installed for the printer?
  2. do you receive error messages when you try to print?
  3. What is the exact model of the printer number?

   

  You can check the links below and check out them if the steps to help you resolve the issue-

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows?T1=tab04

  
  You can also check the below link to get the latest drivers for the printer according to the model and verification number.

  http://WWW8.HP.com/th/en/support-drivers.html

   

  I hope this helps.

• -SOLVED! -PCI or USB wireless adapter is disabled and will not activate on Windows 7

  The solution: uninstall ZoneAlarm!

  I spent 3 days and 3 different cards, trying to solve this problem. First of all, I bought a Netgear PCI wireless adapter. Installed according to the instructions. Device Manager showed the adapter works properly but turned off and nothing I tried would enable the adapter.

  NETGEAR has taken over to the store and buy a Linksys PCI wireless adapter. Exactly the same problem. Device Manager, said the adapter worked correctly, but turned off and would not turn on.

  So I called Linksys support and paid them only for the remote service and they couldn't get it to work either (of course to return money). They suggest is to contact Microsoft technical support or buy the USB version.

  I went and picked up the USB (WUSB600-N v.2) version today and guess what? Exactly the same problem. Device Manager showed the device works correctly, but turned off and would not turn on. After talking to a few other technicians in addition to myself, we agreed that the only other option was to reinstall windows. But just before I decided to do, I checked one last time to Google and came across a post in the forums of Vista by someone who had the same exact problem, uninstalled ZoneAlarm and then worked their wireless adapter.

  Well, I decided to try that before reinstalling windows. As soon as I uninstalled ZoneAlarm and the computer restarts, the adapter has been activated and automatically found my network! This means that ZoneAlarm control network on the computer and for some reason cards some not allowing a wireless adapter is enabled.

  Then I tried to re-setup of ZoneAlarm. After that I have re-installed, my wireless adapter became instantly disabled and would not turn on again. So I uninstalled ZoneAlarm at all times. My router has SPI and NAT firewall on top of the Windows Firewall, so I need anyway ZA.

  If you have ZoneAlarm, get rid of it. If you still experience the problem of your card activating Wireless does not and have ZoneAlarm, try to uninstall any firewall software 3rd - party that you have already installed (not the Windows Firewall).

  I was really frustrated after spending 3 days with 3 different adapters and many trips to stores using the adapters and buy different cards. I'm glad I found this post on the forums of Vista, so the credit goes to the one who made this post.

  On a side note, after I installed the drivers from the CD and Linksys site, Windows update has shown there is an updated driver on the site of Ralink which I installed it and so far no problem. My WUSB600-N automatically connected to the strip of the 5 GHz on my router dual band and speeds are ultra fast and signal is strong in a completely different room.

  Hope this information helps others finally solve this problem.

  See you soon,.

  Matt

  64-bit, but it should work on either. ZoneAlarm includes network connections and was not what allows the adapter to be activated. Even close ZoneAlarm does not work either. ZoneAlarm must be uninstalled from the card must be activated.

  Vista drivers work fine with this adapter. Then a Windows Update is the updated drivers for Ralink which also work very well.

  If you have properly installed the drivers and display device manager the device works correctly, but disabled, and then uninstall any firewall/antivirus 3 rd-party should do the trick.

  I am a tech, more I consulted other technicians as well as paid for technical support of Linksys and nobody could understand this problem and it's no wonder. Who would have thought that ZoneAlarm or any 3rd part antivirus/firewall software would take complete control over network connections and not to allow a new network adapters must be installed correctly.

  If anyone needs any help other than that, feel free to ask.

• My 6600 all-in-one wireless will not stop printing.

  OS Win 7. My 6600 all-in-one Officejet wireless not printing stop. It prints a "D" in the upper corner and continues printing page after page, until I have to turn the printer off. Without control panel and the error message does not display items to print. No changes, but printer is only a month or so old. As I was leaving the printer and the PC off.  Apparently, he's been using my data limit.  Like 4 times what I used normally. Is this typical?

  @Speechguru,

  I see that you have a problem with a page of report printing after each print job. I know that you don't think that it comes from the WORD, but this solves several issues about the summary reports being printed after each print job.

  Open word, then

  1. Click on the "desktop" (left upper corner of the window) button and then 'print '.
  2. Click on 'Options' (lower left corner of the print window)
  3. Choose the section "display".
  4. Uncheck the box 'print the document properties '.
  5. Click OK for all windows and you're done

  Try to print after that. Let me know the results.

• Photosmart premium all in a defiler of c309a wireless radio is on, but will not recognize network

  Using a laptop computer Dell windows 7 with my printer and it works well. All of a sudden, my wireless to the printer indicator is on, but I can not get the printer to recognize the network at all, and obviously can not print from my wireless laptop. Works very well by USB.  I ran all the diagnostic tools on the site of hp, nothing helps... The printer is only 18 months - old do not throw out just for that! Any ideas how to solve this problem? I have reset the router, hard to reset the printer and followed all the steps of the Diagnostics. I'm puzzled!

  I feel like a real dope. But this correction is so simple and cost nothing. You need not map the c309A wireless. What I did, is running a network cable to the back of the printer to my router (one of taking four behind) which automatically added the printer to my home network. So all I had to do after is go to the "Add a printer" Wizard on my computer laptop windows 7, let the wizard find the printer, which she did, and it works very well, from anywhere in the House. I don't know why I didn't think this earlier.  I'm not an expert, just do a lot of trial and error and I usually understand. I woke up in the middle of the night and thought of this. Feel really stupid! But what surprises me, why the guy from HP offers this? What is with that?  (by the way, I found the part, but they wanted bucks 48.00 plus 12 for shipping.) What a scam! That's not your job, it's Mr. HP guy?

  WOOHOO!