DynDNS update script
Hi all
using the script old udate Hurricane Electric ipv6 tunnel endpoint I ended up making it to dyndns.
the reason why is that a lot of time, just a virtual interface breaks down and the dns is not updated by using the method of ddns.
Here is the code:
#-------------------------------------------------------------------------------------
# Policy EEM that updates the ipv4 or DynDNS
#
# expected syslog messages:
# % HA_EM-6-LOG: ddns.tcl: http request failed
# % HA_EM-6-LOG: ddns.tcl: response: nochg
# % HA_EM-6-LOG: ddns.tcl: response: good
# # ddns.tcl # #------------------------------------------------------------------------------------- : cisco::eem:event_register_none maxrun 300 queue_priority low 0 nice import namespace: cisco::eem: *. import namespace: cisco::lib: *. user the "USERNAME" value passing game "PASSWORD." the value of fqdn "COMPLETE." set the url "http://members.dyndns.org/nic/update?hostname=$ fqdn & generic = NOCHG & mx = NOCHG & backmx = NOCHG" Set authentication ' Basic [base64::encode $user: $pass]. Set headerl [list authorization $auth] If {[catch {http::geturl $url - $headerl - queryblocksize 50 - collectors ' text/plain'} token]} {} action_syslog priority info msg "http request failed. } else {} action_syslog info msg priority "response: [http::data $token]. } Exit 0 Actually, I would like to improve it, adding the myip = argument. This would be necessary in the event that more than one interface must be the subject of a follow-up. I would like to do something like: set interface "interface full name." set the url ""http://members.dyndns.org/nic/update?hostname=$ fqdn & myip = $ipinterface& theme = NOCHG & mx = NOCHG & backmx = NOCHG "" I don't know how to get the ip address of the interface. Best thing to do is to CLI commands as you would manually. Treatment "interface INTF show | address Internet Inc. is"a good way to do it. if { $_regexp_result == 0 } { set ipinterface $addr set url ... # Close open cli before exit. catch {cli_close $cli1(fd) $cli1(tty_id)} result Tags: Cisco Network Programs like Windows Mobile Device Center and DynDNS Updater hangs I am facing this problem with several software. When I try to launch Windows Mobile devices, it crashes or closes just without any notification. A window pops up saying Windows Mobile Device Center has stopped working and gives only 2 options closing program and 2nd-check online for a solution and close the program. It is the same with other software like DynDNS Updater 4.1.6 I downloaded from http://www.dyndns.com/support/clients/ . Windows mobile device center window details of the problem as below Description: Stopped working Signature of the problem: Problem event name: CLR20r3 Signature of the problem 01: wmdc.exe Signature of the problem 02: 6.1.6965.0 Signature of the problem 03: 465eefc9 Signature of the problem 04: mscorlib Signature of the problem 05: 2.0.0.0 Signature of the 06 problem: 4889dc80 Signature of the problem 07: f51 Signature of the 08:0 problem Signature of the problem 09: N3CTRYE2KN3C34SGL4ZQYRBFTE4M13NB The system version: 6.0.6001.2.1.0.768.3 Locale ID: 1033 Dushyant salvation, Before solving the problem, I suggest to create a system manually, Restore Point so that in this case, a problem occurs when performing these steps, you can always perform a system restore. Step 1 Uninstall Windows Mobile device under Windows Vista programs and features. Access the link below and follow the steps in the article to uninstall the program. http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program Step 2 Follow the steps below only once you have backed up the registry. a. Click Start, in the search box of start, type regedit and press ENTER. b. If you are prompted for an administrator password or a confirmation, type the password, or click on allow. c. in the navigation pane, locate the following registry subkey: d. in the registry editor, navigate to the following location: HKEYCURRENTUSER > SOFTWARE > MICROSOFT > WINDOWS CE SERVICES > PARTNERS e. check the keys referencing your mobile device and right-click on it and remove the keys. Note: The problem may occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, follow the steps in the link below: http://support.Microsoft.com/kb/322756 Step 3 Restart the computer and download the Windows Mobile device Center on your computer the link below and install it and check if it works fine without any errors. http://www.Microsoft.com/windowsmobile/en-us/downloads/Microsoft/Device-Center-download.mspx You can also uninstall and reinstallDynDNS Updator 4.1.6 program and check if it works very well.
I hope this helps. Let us know the results. Thank you and best regards, Srinivas R Microsoft technical support. Visit our Microsoft answers feedback Forum and let us know what you think. help with bulk - update script vcloud Org Hi all I need to update the following script to edit only all VMs in a single body... I don't want to touch to all environments... ForEach ($vm in (Get - VM)) {} $vmv = get - VM $vm | Get-View $name = $vmv. Name $guestid = $vmv. Summary.Config.GuestId $vmx = new-Object VMware.Vim.VirtualMachineConfigSpec $vmx.extraConfig += new-Object VMware.Vim.OptionValue $vmx.extraConfig [0] .key = "monitor_control.enable_softResetClearTSC." $vmx.extraConfig [0] .value = 'TRUE '. If ($guestid - like ' windows8 * Guest ') {} ($vmv). ReconfigVM_Task ($vmx) } } When I connect to the specified by connect-ciserver-Server xxxx - Org Org MyOrg and test, it tells me: Get - VM: 09/05/2016 15:40 Get - VM you are not currently connected on all servers. Sign in first with a cmdlet Connect. C:\scripts\TSCClear.ps1:1 char: 18 + ForEach ($vm in (Get - VM)) {} + ~~~~~~ + CategoryInfo: ResourceUnavailable: (:)) [Get - VM], ViServerConne) ctionException + FullyQualifiedErrorId: Core_BaseCmdlet_NotConnectedError, VMware.VimAuto mation.ViCore.Cmdlets.Commands.GetVM Not a script guru here, just trying to see if I can make this work in an Org with some modifications You get the error message because the cmdlet Get - VM work, you must be connected to a vCenter server. For the ReconfigVM_Task() method, you must be connected to a server vCenter as well. The following PowerCLI script connects to both a vCloud Director Server and vCenter server. The script uses the cmdlet Get-CIVM to recover virtual machines in the organization. Because the VirtualmachineConfigSpec is the same for each virtual machine, I took it out of the loop to make the script run faster. $Organization = 'MyOrg ". $CIServer = "vCloudDirectorServer". $VIServer = "vCenterServer". Connect-CIServer-Server $CIServer SE connect-VIServer-Server $VIServer $vmx = new-Object VMware.Vim.VirtualMachineConfigSpec $vmx.extraConfig += new-Object VMware.Vim.OptionValue $vmx.extraConfig [0] .key = "monitor_control.enable_softResetClearTSC." $vmx.extraConfig [0] .value = 'TRUE '. ForEach ($vmv in (Get-View - RelatedObject (Get-CIVM - Org $Organization). ExtensionData)) {} $name = $vmv. Name $guestid = $vmv. Summary.Config.GuestId If ($guestid - like ' windows8 * Guest ') {} ($vmv). ReconfigVM_Task ($vmx) } } Don t work since the last update scripts Hello. Since I've updated Edge animate last Monday (20141) I have to load the library jQuery manually to work with scripts, it is a bug? The´re a solution? Thank you. Yes, you will need to have jquery in the script Panel if you want to use jquery. This allows to reduce to a minimum the payload for those who do not want to use jquery. Problem with the Update Script Try something like this... Update v_contract v1 or read this... Hi all 11.2.0.1 AIX6 I'm really confused by updating a table. I don't understand the logic how Now I want to update T1 (a1, b1, c1, d1) with T2 (b2, c2, d2) As in: Update T1 the value of a1 = "AIX". where b1 = b2 and c1 between c2 and d2 and d1 = 'Oracle '; Help, please... Thanks Pk UPDATE T1 SET A1 = "AIX". WHERE EXISTS (SELECT 1 FROM) T2 WHERE T1. B1 = T2. B2 AND T1. C1 BETWEEN C2 AND D2 AND D1 = 'Oracle') AND D1 = 'Oracle '; Form PDF - total update scripts So I set up a purchase order in acrobat format. The user enters a quantity for each item and the item subtotal and total combined costs are calculated. The problem - to open the PDF file and entering the quantity first, the point subtotal updates but the total remains zero. Once any other field is changed or if the first field is changed a second time, the combined total updates. Any thoughts? Thanks in advance for the help. the form can be downloaded here- http://www.vermontel.com/~KNSH/beta/knsh_order_form.PDF It is a problem with the calculation of field order. (In Acrobat X) Go to the form view edit and then click on other tasks - Edit Fields - Set field calculation order... Change the order so that subtotal is greater in total. Code action for the Update Script TOO BAD > I THOUGHT OF IT! Run scripts to update for W_DAY_D I have a requirement where I have to table update W_DAY_D after completing the workflow. I have 4 update scripts to update the table. I want to know how can I do it in the ADF. I saw the DAC options to run a stored procedure and the SQL query for a task should be created. But I don't know how I can do it. I tried to add 4 actions of different tasks for 4 update scripts to add to the last task running in the execution plan, but I'm not able to add more than one action to the task because it gives me error message saying Cant insert a new record with the same key of user already exists. Can someone please tell me what will be an easy way to do it. Any help would be really appreciated. Thanks in advance! Try to give a different name and try Script errors since upgrading Firefox Firefox is basically useless for the moment. I can't lose another day of work because of this problem. I am on Windows 7 and just updated to Firefox 37.0.2 two days ago. Since the update, scripts have been slow to almost zero the page loading. I have not loaded something again to my browser over the last two weeks. I'm not going to sit around test a bunch of crap then please don't even suggest it. Either someone has a fix for this issue or it please tell how to return to the previous version of Firefox. If I don't have this problem to be solved before the end of the day, I'm done with Firefox. Hello Refresh (called "Reset" in older versions of Firefox) can solve a lot of problems in restaurant Firefox as his default factory while saving your bookmarks, history, passwords, cookies, and other essential information. Note: When you use this feature, you will lose all the extensions, toolbar customizations, and certain preferences. See article Firefox Refresh - reset modules and parameters for more information. Refresh for Firefox:
click Help and select troubleshooting information. Should open a new tab containing your troubleshooting information. This corrects the problem? Please report to us! Thank you. I have extracted the tar file, but could not find a Firefox update script file. I don't want to spoil the Firefox that works, so I'm not blindly run something that I don't know what he'll do. I can't find instructions on how to manually update Firefox, and it will not be upgraded automatically. What is my next step? Can I get help? You currently have the version of Firefox which is the hallmark of SUSE, and version should be updated via this facility deposits. You can copy the content of archive tar.bz2 to another folder and create a new launcher to launch the firefox script in this folder to run this version of Firefox with this profile by adding Pei 'profile_name' in the command field. You must create a new profile if you want to continue to use the version of Firefox 3.6.x How to configure DynDNS for camera IP with Airport Extreme? Hello... I recently bought an airport extreme 6th gen. I have an IP camera installed on my cabin, which I would like to access remotely for security reasons. My internet provider does not have a fixed IP address, so I need to be able to access my camera, even if my IP address changes. I understand that I must install a Dyn DNS, but I can't seem to set it up on my airport extreme. Is it possible to do? If not, is there any IP camera on the market that is completely compatible with Airport Extreme for remote access? DynDNS don't think you can do this with an Airport Extreme https://help.dyn.com/airport-and-time-capsule-with-dynamic-DNS/> If you have another computer in the cabin, you can then run a DynDNS update utility on this computer. If not, perhaps you should consider a different router for the cabin. You could put the Airport Extreme in Bridge mode and still use it. Window update created an error STOP 0x0000007E... cannot start. My Windows Update auto ran last night and said he had to restart... When it restarted I now have a BSOD with a STOP error message. Error code reads Stop 0x0000007E (0xC0000005, 0x7D7FBB28, 0xF789E3E4, 0xF789E0E0) I can't go to the last good Setup... I can't switch to secure Mode... I "want" to restore to a previous restore point. I don't have a bootable installation disk... I can download and burn the CD from another PC if necessary... Any help would be appreciated... (Running Windows XP Media Center) UPDATE - I have logged on to the Recovery Console and search for updates to Windows that were installed yesterday. (Go DIR $* the C:\Windows directory) Here are the updates that might be the problem: KB971468 KB975560 KB977165 KB977914 KB978037 KB978251 KB978262 KB978706 Any of you who have the same problem verificarlo as well so that we can compare updates? I would go to the bottom of this quickly because I am sure that this is not the only machine I encounter today with this problem. FIXED! OK - I uninstalled a few updates and now the PC boots fine. The update that caused the problem is one of the following 3: KB977165, KB977914, or 978037. I started with my list above uninstallation of groups of 3 in time to limit. You will need a Windows XP installation disc to do this. Start out of him and enter the Recovery Console. To uninstall the updates to the recovery console, follow these steps: 1. change of the directories in the directory to uninstall update in question: at the C:\windows prompt, type ' CD $NtUninstallKB977165$ \spuninst "and press ENTER. 2 carry in the uninstall for this update script: at the prompt, type "BATCH spuninst.txt" and press ENTER. She runs the txt as a command script file. I did for each the three edits I listed above (changing the KB... part to match the update I wanted to delete) and the PC boots into Windows without problem. Now, off the coast of research three updates to find out which Windows has broken one and why. Post and let me know if this helped some of you. Update the Firmware of the HARD drive Hello My paintings tell me that I had to upgrade the firmware of the HARD drive. I have SyncRep enabled on these paintings and I want to know if this is important? No, it does not matter. You are a member of the Group at a time. The update script will do a disc, restart it, and then move on to the next. It is best to do so in a period more short I/O. Help! Can not update Windows 7. I examined the various knowledge base articles and downloaded the troubleshooting and updating tool. I also tried to download the update to download windows script and the following things happened: -Hang facilities -run the update script gets "access denied." I must have spent all day trying to get MS. updates I even changed the DNS to 8.8.4.4 because I heard that there may be problems with the Time Warner network connection. I came to a point where I don't know what else to do... I've never had this problem before. Help. Thank you. Microsoft made a big mess of Windows Update! Obviously, Windows 7 owners receive a low priority. This happened 6 months now. WU can take many hours. In most cases, PATIENCE is the best tool. A lot of people stop at Midway WU after a few hours, assuming it is broken. Then take all kinds of measures to try to "fix". In most cases, it is not broken. In many cases the 'fixing' problems that didn't have to be there. In addition to this, as you can read about it in the statutes of Woody Leonhard, Microsoft has been releasing a lot of bad updates that are not tested and cause countless problems. The advice I give to my clients is to assign WU to NEVER, run it manually once per month and hide any update is optional, or unqualified security. More simply, only install the security updates. Microsoft has not released an update to Windows 7, which was not helpful to Win7 overall of 2015. I don't expect everything. All security updates are not or are optional are tools to help Microsoft to turn your computer into what she wants it to be and help them spy on how you use your computer. Replace asterisks around words in italics? I created a rather long novel by using markdown and wants to open the text in pages (and possibly author iBooks). After trouble with paragraph breaks, my simple solution was to export the markdown to plan the text so far. However, all the words I for Why the iPad Mini 4 costs the same as the iPad 2 air? I would buy a new iPad, but I don't know which one to buy: iPad 9.7 "iPad Mini 4 and iPad Pro 2 air. It is between the Air 2 and 4 Mini, but I still don't understand why the same cost. Can someone answer this question for which I have looked everywhe TECRA A10, what are the changes in the update of the BIOS 2.1? I can't find a description of the bios update 2.1 After the update,According to me, the fan runs faster and sound Sometimes a beep when you use Satellite L100-130 Toshiba Satellite L100-130Sometimes, I hear a beep like sound for 1 second during the use of the computer. Do you know what causes the sound and how I can stop it: /. TV is only in black and white when it is connected to the Dell Inspiron 1525. Original title: black and white tvv. I have an inspiron 1525, Dell and when I connect it to my TV my TV is only in black and white, I would have the color and what do I do?if [catch {cli_open} result] { error $result $errorInfo } else { array set cli1 $result } if [catch {cli_exec $cli1(fd) "show int INTF | inc Internet address is"} _cli_result] { error $_cli_result $errorInfo } set _regexp_result [regexp {Internet address is ([\d\.]+)} $_cli_result match addr]
puts "Interface INTF does not have an IP address"
exit 1
}Similar Questions
In the end, I want to update the table like that, but first test it on a single customer.
Are the media may not play directly, or am I missing something else?
Update v_contact v1
set
(v1.inactive_contact) = - 1
where (v1.cust_id =
customer_contact_nrd.customer_id and v1.contact_no =
customer_contact_nrd.contact_no and customer_contact_nrd.active = n
and v1.cust_id = 106586)
Thank you for your help.
Published by: mcramer on October 26, 2009 12:38
Set v1.inactive_contact = - 1
where v1.cust_id in
(by selecting v1.cust_id in customer_contact_nrd v3
where v1.cust_id = v3.customer_id
and v1.contact_no = v3.contact_no
and v3.active = ' n and v1.cust_id = 106586)
http://www.jlcomp.demon.co.UK/FAQ/lost_update.html
Can someone put me directly? Here's the script:
Changes the colors of background on the development as well as remove the text currently in the text box.
nameTxt.onSetFocus = function() {}
nameTxt.text ="";
nameTxt.backgroundColor = tbgColorOn;
emailTxt.backgroundColor = addressTxt.backgroundColor is cityTxt.backgroundColor = stateTxt.backgroundColor = zipTxt.backgr oundColor = ageTxt.backgroundColor = genderTxt.backgroundColor = descTxt.backgroundColor = tbgColo rOff;.
};
emailTxt.onSetFocus = function() {}
emailTxt.text ="";
emailTxt.backgroundColor = tbgColorOn;
nameTxt.backgroundColor = addressTxt.backgroundColor is cityTxt.backgroundColor = stateTxt.backgroundColor = zipTxt.backgr oundColor = ageTxt.backgroundColor = genderTxt.backgroundColor = descTxt.backgroundColor = tbgColo rOff;.
};
addressTxt.onSetFocus = function() {}
addressTxt.text ="";
addressTxt.backgroundColor = tbgColorOn;
nameTxt.backgroundColor = emailTxt.backgroundColor = cityTxt.backgroundColor = stateTxt.backgroundColor = zipTxt.backgrou ndColor = ageTxt.backgroundColor = genderTxt.backgroundColor = descTxt.backgroundColor = tbgColorO and ff.;
};
cityTxt.onSetFocus = function() {}
cityTxt.text ="";
cityTxt.backgroundColor = tbgColorOn;
nameTxt.backgroundColor = emailTxt.backgroundColor is addressTxt.backgroundColor = stateTxt.backgroundColor = zipTxt.backg roundColor = ageTxt.backgroundColor = genderTxt.backgroundColor = descTxt.backgroundColor = tbgCol orOff.;
};
stateTxt.onSetFocus = {zipTxt.onSetFocus = function ()}
stateTxt.text ="";
stateTxt.backgroundColor = tbgColorOn;
nameTxt.backgroundColor = emailTxt.backgroundColor is addressTxt.backgroundColor = cityTxt.backgroundColor = zipTxt.backgr oundColor = ageTxt.backgroundColor = genderTxt.backgroundColor = descTxt.backgroundColor = tbgColo rOff;.
};
zipTxt.onSetFocus = ageTxt.onSetFocus = function() {}
zipTxt.text ="";
zipTxt.backgroundColor = tbgColorOn;
nameTxt.backgroundColor = emailTxt.backgroundColor is addressTxt.backgroundColor = cityTxt.backgroundColor = stateTxt.back = ageTxt.backgroundColor = genderTxt.backgroundColor = descTxt.backgroundColor = tbgCo Kosmetikstudio groundColor;.
};
ageTxt.onSetFocus = function() {}
ageTxt.text ="";
ageTxt.backgroundColor = tbgColorOn;
nameTxt.backgroundColor = emailTxt.backgroundColor is addressTxt.backgroundColor = cityTxt.backgroundColor = stateTxt.back = zipTxt.backgroundColor = genderTxt.backgroundColor = descTxt.backgroundColor = tbgCo Kosmetikstudio groundColor;.
};
genderTxt.onSetFocus = function() {}
genderTxt.text ="";
genderTxt.backgroundColor = tbgColorOn;
nameTxt.backgroundColor = emailTxt.backgroundColor is cityTxt.backgroundColor = addressTxt.backgroundColor = zipTxt.backgr = ageTxt.backgroundColor = descTxt.backgroundColor = tbgColorOff oundColor;.
};
descTxt.onSetFocus = function() {}
descTxt.text ="";
descTxt.backgroundColor = tbgColorOn;
nameTxt.backgroundColor = emailTxt.backgroundColor is cityTxt.backgroundColor = stateTxt.backgroundColor = addressTxt.back = zipTxt.backgroundColor = ageTxt.backgroundColor = genderTxt.backgroundColor = tbgCol orOff groundColor;.
};
Hi all
Maybe you are looking for