Dysfunction of SoftKey on Tecra S11

Similar Questions

• Tecra S11 - 140 - HARD disk Protection works only with windows 10

  After a clean install of windows 10 in my laptop S11-160, Device Manager does not recognize HARD drive Protection sensor, so in the HARD disk Protection settings, this option cannot be enabled. Is it possible to fix it, or I come to windows 7 and then move to 10?

  Another problem is that when I try to burn a dvd or a cd, I get an error: "write speed is too fast or too slow. The reader, MATT * A DVD-RAM UJ890AS, worked perfectly on windows system 7.

  Any help would be appreciated!

  After you install clear 10 Windows in my laptop TECRA S11-160, Device Manager found no sensor HARD drive protection, so within the parameters of this protection cannot be enabled. What I have to go back to windows 7 and upgrade to Win 10, or is there another solution?

• Tecra S11 - broken LCD

  Good afternoon

  I have a toshiba tecra s11-128 with broken LCD screen.
  This model has an LCD with a resolution of 1366 * 768.

  The same series (example: S11 - 11 d) was also equipped with the LCD HD + (1600 * 900)

  I can replace it with HD + LCD screen (resolution of 1600 * 900)?

  Thanks for any response.

  You are right. both models have different LCD displays but the same graphics card. I can't say for sure, but I'm sure you can use the HD screen + with your laptop.

• Defective Tecra S11 - need new notebook with Express-Card-Slot

  My TECRA S11 166 is defective.

  I need a new Notebook with * Express-Card-Slot * and (if possible) RS232.
  What type of laptop comes with an Express Card Slot?

  Hello

  Ago different Toshiba computers laptops on the market and Toshiba release new models at very short intervals.
  I recommend you visit the page of the Toshiba laptop computer product and to compare the models and series available.
  Computers Tecra laptops offer a professional use and Portege series is best in mobile computing.
  The series of satellites is machines of entertainment designed to provide exceptional all-round performance.

  http://www.Toshiba.EU/laptops/

• Tecra S11 touchpad hardware replacement

  Hello

  How can I know * what is the number of exact part of my touchpad on my Tecra S11 *-11 H? PTSE3E-XXXXXXX

  It is a little slow, he is sometimes slow to react. I've already implemented in the extended in the mouse settings option.

  where can I buy a new one?

  In my opinion if you want to get any compatible part for all Toshiba laptops, you should contact Toshiba service provider authorized in your country.

  ASP is able to supply all the parts of the laptop. Even if the part is not available, they are able to order the essential part of the Toshiba s doll.

• Tecra S11 with BIOS 3.50 - USB mouse is not recognized at startup

  Hello

  I installed the latest version of the BIOS in my TECRA S11 - U10, and now my "HID" device does not-that is to say my dongled USB wireless mouse. I must now remove the dongle and re - insert before the TECRA sees the mouse.
  Boring, just about usable, but it's a PITA and I'm aware of always 'making/breaking' the USB connection.

  Must be something to do with the BIOS and see devices HID on "start"?
  Finally, I enabled Legacy USB in the BIOS device support, but still no joy. In addition, have tested the mouse on other laptops - works well at the start, so NOT the mouse.

  Suggestions, people? Thank you...

  Hello

  Disconnect your USB mouse and go to Device Manager.
  Remove all USB hubs and USB controllers in Device Manager list.
  Reboot the laptop.
  Wait until all the USB ports have recognised and installed again.
  Then connect the USB mouse and check how it works.

  You should also test different USB ports available on this laptop.

• Tecra S11-128 - hardware replacement

  Hi all,

  I'm sorry for my English not good.

  I have a problem: my Tecra S11-128 pc is dead.

  When the power is connected, the power led is light. When I press the power button, there is no answer. Nothing. Dead.

  I tried to get it repaired in a technical centre, but they said that they cannot fix it.

  On eBay, I found this motherboard: http://www.ebay.de/itm/Toshiba-Tecra-S11-168-Motherboard-Mainboard-fuer-i5-/141290303681?ssPageName=ADME:X:RTQ: A: 1123

  But the description says "Tecra S11-168",

  Is it possible to change the my Tecra S11-128 with the Tecra S11-168? Are they compatible?

  Thank you.

  It seems that two laptop computers Tecra are the same. In other words, they have the same part number (PTSE3E), so I think you can buy it.

• Tecra S11 - market auto in the BIOS

  Hello

  I have a Toshiba Tecra S11 and I want to on my laptop when I plug in the power cable.
  I find all of the features in my BIOS of energy auto on, or something like that.

  Furthermore, is it possible to turn on with a USB keyboard or usb receiver infra-red?

  Thanks in advance for any suggestion

  Hello

  > I have a Toshiba Tecra S11 and I want to on my laptop when I plug in the power cable.
  > I can't find all of the features in my BIOS of energy auto on, or something like that.

  I've never heard of these characteristics and to my knowledge, that this option does not work, there is in the BIOS released for Toshiba laptops.

  In my case the BIOS contains an option like Wake Up LAN or Wake up on the keyboard.
  This allows the laptop to wake up sleep mode by LAN or the keyboard.

  The option that you're looking for should be something like power on USB etc, but I doubt that its share of the current BIOS

• Tecra S11 - 11G - Linux installation

  Hello

  I got a Tecra S11 11 G and I want to install Linux Mint on it.
  During installation, I get the error that 'acpi CCP probe failed.
  I googled for the last hour and I discovered that it can be connected to the uefi boot mode.
  But my laptop has uefi?
  Does anyone know what I can do to fix this?

  Thank you
  Theboda

  You can run Linux Mint live view? If so, start Linux Mint in direct mode and run GParted. In the GParted menu bar, click view , and then click device information. If the partition table is reported as TPG, the hard disk is partitioned probably for UEFI. Another control, you can do is to search a tagged partition ESP. An ESP partition indicates also that UEFI is in use.

• Tecra S11 - 2 unidentified device and sound card

  After installing xp my Tecra S11 does not recognize the audio driver.
  I tried the drivers nvidia and realtech but both didn't work.

  How can I solve this issue?

  Also I got 2 unknown device in Device Manager.
  They named device Device PCI Bus 0 27 and Bus 0, device 1

  What is?
  How can I find related drivers?

  Hello

  You should check the VEN_ID and DEV_ID of two unknown devices.
  I found really nice description here:
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=78

  This would help you to identify the device / manufacturer of this unit and you should be able to find the driver.

• Tecra S11 / Win7 - costing of fingerprints - is safe?

  Hi my friends,

  My machine is a Tecra S11 / Win7 pro

  If I encrypt all files on my Win 7 Pro with encryption of fingerprint, it copies the file encrypted again to a new memory address and after encryption, it will remove the (original) unencrypted file.

  BUT, how? Is it overwrite the original unencrypted file with a kind of algorithm that is. Gutmann 35 ×, or just delete as normal? So if someone access my computer or my HARD drive, if it is able to recover these files unencrypted?

  Hello

  Maybe this Toshiba document on fingerprint software will help you understand the process:

  * Important information about protecting files with AuthenTec fingerprint software *.
  http://APS2.toshiba-tro.de/KB0/TSB9C02RC0001R01.htm

• Tecra S11 - replacement after HARD drive I can't update BIOS

  My HDD in Tecra S11 is dead, and I bought a new SSD.
  Everything works OK, but I can't update the BIOS again. Update utility displays an error:

  Error: Preparation of updated failed.
  You have not given permission to run the update.

  What should do? Help, please.

  > Error: Preparation of updated failed.
  > You have not given permission to run the update.

  You have administrator rights?
  Looks like the issue may be related to missing privileges that are necessary for the execution of an update.

  You can enable the administrator account, follow these steps:
  Choose command line (cmd the black box)
  In the box type net user administrator / Active: Yes
  And then disconnect. Usually, an additional user account should be visible administrator.

  Now, log in using that account and try to run the BIOS update.

  Note: in many cases the VAP (value added package) is required to run the BIOS update.
  Remember also, that the package was decompressed properly before you run the exe file.

• How downgrade the BIOS on Tecra S11 - boring CPU

  I have a BIOS that is "solve" the problem of high pitched noise high on the i5 CPU.
  But I have the latest version of the BIOS and since then I can not downgrade to the older BIOS which allows to "solve" the problem.

  * My question is how do I get the BIOS? *
  Because I send my Toshiba to RMA more because they will not fix it!

  My Tecra S11 went to RMA 2 × and 2 different authorized Toshiba service approximately 1 month partner. None of them repaired my laptop! More annoying is that the Hungarian services are absolute useless! I have a 2 year problem, with the high pitched noise high CPU.

  They have not replaced the defective processor, they replaced the motherboard! for no reason. OMG!
  Be very careful when you buy PC Toshiba laptop in Hungary and is not due to lack of the Toshiba but authorized service partners!

  Please, Toshiba do something!

  Hello

  Why do you think that CPU must be replaced?
  I guess that the technicians ran some diagnostic tests which can detect defective parts, I guess the CPU was not affected, but the real question was the motherboard (because it was replaced).

  However, what s your problem exactly?
  Why you want to downgrade the BIOS?

• SATA on Tecra S11 speed

  Hello

  I'm looking for a tecra S11 sata connection speed.
  I want to replace my ssd for the greater and I was wondering if I could win something when I buy a sata-600 drive instead of the sata-300 that I use at the moment.
  I use an OCZ vertex II now (120 GB)
  I would go for the OCZ vertex 3 (256 GB), but this one has connection sata-600.

  will this work? and the sata-600 enjoy my system?

  Kind regards

  Luke

  > I would go for the OCZ vertex 3 (256 GB), but this one has connection sata-600

  SATA 600 means SATA III standard that support the theoretical 600 Mbps transfer speed

  SATA III is backward compatible with SATA I and II.
  So you can use the SSD 600 MB/s (SATA revision 3.0) in connection with SATA I and SATA II. But of course, the speed would be limited to these standards.

  AFAIK the Tecra S11 supports SATA 2.5 Rev (gen 2) which means that it is SATA II limited to 300 MB/s

• Tecra S11 - nVidia or RealTek audio driver. That you install?

  Tecra S11 nVidia vs RealTek sound driver - which one should I install?

  I installed nVidia and realtek audio driver also. I've got BSOD when I plug headphones 3.5 mm jack. When I want to listen to music with my Bluetooth stereo headset also got BSOD.

  I reinstalled the drivers for card its nvidia and realtek. My Tecra S11 is very slow since I installed the latest video driver from nvidia site nvidia.

  Windows 7 very very slow since then. Start time of Firefox until sometimes 20-30 sec

  Can you please post the exact model name and model number?
  You can find it on Toshiba sticker placed on the bottom of your laptop.