E/s treadmill error * a DVD player - Satellite M30X

Similar Questions

• IDE error - unrecognized DVD player - Satellite 2410-504 #1

  Hello, recently I got a rug * a dvd - ram UJ - 831 s Reader installed to replace by my insurance policy in my Toshiba Satellite s2410-504. The car worked well until recently, when I get the IDE #1 error at startup, then the drive does not appear in Windows - Win Explorer or Device Manager. I tried to update the firmware for the recommended: DVD + r / + RW/RAM Drive(UJ-831) F / W revision: V102. But I got the message that the drive is not connected when I am asked to open it. I want to emphasize that I tried this update when the drive is actually (sometimes is just appear randomly, sometimes it appears after the release of the standby mode)

  I also tried 4 or 5 times the resettlement of the drive with no luck. How can I fix my drive? I have read on the bypass and master/slave problems but not too sure about this or if it's the right thing to do.

  Thanks in advance for your help,
  David

  Hmm, it would be very interesting to know if this message appears.
  For me, this looks like an auto damage with a bad firmware.

  > I get the message that the drive is not connected when I am asked to open it
  For most of these messages are displayed if the drive is not connected OR the firmware was bad. I think that it s because of the second possibility.

  Maybe the firmware has changed the master/slave/c-salt settings and now the BIOS does not recognize the disc correctly.

• Error: The DVD player won't read or burn discs. TS-L633R CD-DVD player. Laptop HP DV6-3120US. Win 7.

  The product name and number:

  HP Pavilion dv6-3120us

  OPERATING SYSTEM

  Windows 7 Home Premium. 64 bit.

  Error message

  "Insert a disk; Insert a disk in drive E:. "

  Background

  Windows 7 system pre-installed on recognized computer CD/DVD ROM drive for about 3 months. Malware corrupted operating system. I reinstalled the OS disk from the recovery partition. CD/DVD ROM drive could not read or write, and I can not restore the old files or save the current configuration via the CD/DVD-ROM drive. All Windows 7 drivers, and hardware updates seem to be installed and up to date as of 04/10/2011.

  Troubleshooting steps

  1 attempted to play audio CDs. Same error message.

  2 tried to read data CD-ROM. same error message.

  3 tried to read DVD - ROM data. same error message.

  4 Write DVD ROM has failed. Same error message.

  5 re-loaded OS 2nd time. No change. Same error message.

  6. checked with HP Support Assistant. DVD drive is recognized but not the media. No change.

  7 checked Device Manager. DVD player is recognised as TS-L633R.

  8. driver is cdrom.sys version 6.1.7600.16385. Clicked on Update Driver, no change.

  9. I tried the uninstalling and reinstalling the driver. No change.

  10 enabled BIOS. Processor AMD Turion II P540 Dual Core 2.4 Ghz. BIOS seems to be up-to-date, version F.27.

  11 BIOS lists bootable CD/DVD-ROM drive. Reordered the first road and used Knoppix Linux boot boot disk, no change. Windows starts instead.

  12 review of registry for "filter" and "lower filter" entries.  Checked registry 4D36E965-E325-11CE-BFC1-08002BE10318. No upper or lower filters entries in current filter. No change.

  13 Ran 'hardware and troubleshooting of devices. " It cannot detect the cd/dvd. No change.

  The drive has power, WEAVES, is recognized by the BIOS and Windows 7. However, it does not read or write CD ROM or DVD ROM discs

  I'm out of options.  What to do to make the drive to cd/dvd rom read and write CDs?

  

  Thanks for your help.  Matt

  Received a new DVD/CD ROM today S of Ben and Alan at HP today.  The drive was manufactured in July 2011 and seems to have the same model number information. The old one was from December 2010.

  Installation took about 10 minutes to the included instructions, and the player now plays all CD and DVD media.  Thanks to the HP support for replacement of equipment warrantly quick fix.

• Question about CD/DVD player, Satellite L30-10 X write speed

  According to the manual that came with my laptop (L30 x 10), the DVD drive can write CD - RW 16 x speed. However, according to this site (discontinued products) the drive can only write CD - RW at 4 x.

  Could someone please clarify? And is it possible to know what are the different speeds for the DVD player without having to buy all the records?

  Thanks in advance

  Baz

  Hello Baz

  Have you checked the speed for CD - RW you use? Perhaps it cannot be written faster than 4 x speed. Usually what is written on the label of CD - RW.

• Satellite Pro A100 IO error - CD/DVD player-

  Hi all

  My car does not start or read, all I get is an error of e/s.
  She produced just out of the blue and after trying to fix it on my own I had to turn to my local computer dealer, but all he told me was to send my laptop in to Toshiba for a renovation, impossible to determine themselves what the problem was.

  I saw on the net that the carpet * a player installed on this laptop isn't the most reliable on the market, with similar errors a bit, but unfortunately, there is not too much advice on how to correct this problem.

  Is there anyone out there with a few aces up their sleeve, or the best thing just to get a new laptop?

  > fix it on my own
  As I see that you are trying to fix it yourself and nobody don't we know what you did exactly.
  I still don't know what you want to correct. Either player is working or not and that there must be a reason for it. This reason is known to you?

  In any case, the assignment of pins is not the same for all readers, and if you use some with the wrong pin assignment you will get this error. So, if you want to fix this alternative to find and swap the drive with a compatible. Nobody says you have to use the same model.

  In s manuals you can find a list with all compatible readers for your laptop model.
  Check it out.

• How can I reinstall the cd/dvd player - Satellite P100 PSPAD

  Hello

  I have the Satellite P100 (PSPAD) and my cd/dvd drive (I do not know how or when) suddenly disappeard, it does not appear in my computer or Device Manager.
  I tried this but coul not found the lowerfilters so I delite the upperfilter and restart the computer, but it does not work.
  So I can reinstall it somehow and how can I do?

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  Be careful it can be many instances of the registry subkey that is mentioned in step 2.
  You must ensure that you are in the appropriate registry subkey before modifying the UpperFilters and LowerFilters values.
  To verify that you are in the appropriate registry subkey, make sure that the default data value is the CD-ROM/DVD-ROM and the class data value is CDROM.
  3. in the right pane, click UpperFilters, and then click on remove.
  4. click on Yes to confirm the deletion of the UpperFilters registry entry.
  5. in the right pane, click LowerFilters, and then click on remove.
  6. click on Yes to confirm the deletion of the LowerFilters registry entry.
  7. exit the registry editor and then restart the computer.

  And what operating system are you using?

• Error in audio - output Satellite P200-1EE - Toshiba HD DVD player problem

  Hello

  I'm new here so I don't know if I'm in the right forum or not, if I'm not I apologize.

  I have a Satellite P200-1EE and tried to play DVDs on Toshiba HD DVD player but everytime I try it comes up with an error message saying "an error has occurred in the audio output settings. Please check audio driver is set up correctly. »

  I tried the update audio drivers but it tells me that I have already installed the drivers the best.

  Any help would be most appreciated.

  Thank you for your time.

  Hello

  What OS do you have?
  What is Vista?

  If yes then another question; have you installed SP1?

  Please also see the European driver of Toshiba page and choose your model of laptop.
  There is a DVD HD v4.32.00 patch reader.
  The other version 4.51.07 HD DVD player is a full version and if the patch won't work, then you must install the full version.

  See you soon

• Error setting output Satellite A300-1jh - Toshiba HD DVD Player - audio

  I have a problem! When I try to play a dvd on the toshiba hd dvd player its gives me an error message saying "an error has occurred in the audio output settings. Please check audio driver is set up correctly. »

  I read a similar thread on this forum in which it is said that I should install the latest version of the Reader 4.51.07! I installed it, but the message keeps coming back! I have windows vista ultimate 32 with all updates! What do you think I should do? Thank you.

  PS: I have a satellite a 300 (psagle) 1jh

  Post edited by: petrutjim

  Hi mate

  I found this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=162772

  He's certainly the same question as in your case and the solution was a DVD player patches installation or installation of new full HD DVD player.

  Notes; the Vista should be also updated!

• DVD player not working not not Satellite Pro A100 - Code 37 error

  Hello

  Someone help on this?

  I have an A-100 and the DVD player has stopped working in XP. I checked the Device Manager and see XP disc but returns this error "Windows cannot initialize the device of this hardware driver. (Code 37) »

  I also noticed that ASAPI.sys is not running in the Task Manager.

  I'm guessing this has something to do with the problem.

  I tried to reinstall the device drivers, but this made no difference. Any suggestions?

  Hello

  Error code 37 means the driver returned failure from its DriverEntry routine.
  You can try to delete the driver from Device Manager and rebooted the new OS should recognize the drive device and initialize the driver again.

  If this is not enough, try this procedure:
  Run REGEDIT and open the following folders:

  HKEY_LOCAL_MACHINE
  -> SYSTEM
  -> CurrentControlSet
  -> Control
  -> Class
  {4D36E965-E325-11CE-BFC1-08002BE10318}

  After you click {4D36E965-E325-11CE-BFC1-08002BE10318} you should see two settings on the right side:
  "Upperfilters".
  'Lowerfilters '.

  Click on each of them, press DELETE, and then click YES.

  Then restart the laptop and see if it was useful.

• Satellite Pro U300 - DVD Player error

  Hello
  I had not used my DVD player for a long time, and when I tried to use it again the other day that he has stopped working. Where to insert the DVD and the DVD player provided Toshiba starts a message pops up saying
  "Impossible for the release of the video on an external device. "Please change your display keys of the device by pressing the Fn + F5 after the end of the application.

  I did what he said and further and have made sure the computer does not recognize somehow, another device connected to my laptop. All that shows is the LCD screen of the laptop and nothing more. No clue as to how can I fix? I don't have an external display at the moment as im at Uni. so I can't plug a hook to the top and see if it works like that and then properly close. Any other suggestions? Would be great,

  Thank you

  George J.

  Hello

  This problem is known to me. I got it with my Satellite P200. I was not able to solve this problem.

  I just deleted a Toshiba DVD drive and now I use VLC media player. Download the latest version. The player is just great.

• Satellite Pro A300D - error during DVD playback

  Hello

  I have a problem with my satellite Pro A300-140 under Vista 32 - bit OS

  Whenever I try to watch a DVD I get an error message "unable to output the video to an external device. Please check the external output setting after the end of the application "-I don't mean to connect what - I want to just watch a movie!

  Ideas - I've read, it's a known issue, but I can not re - find information?

  Thank you

  Hello

  I don't know what the problem with your Dvd Player, try to open with Power Dvd, you can download

  http://www.CyberLink.com/products/PowerDVD/overview_en_US.html

  Just to check if it is software issue
  Welcome them

  Post edited by: Jeka-HE

• Satellite P300 - Toshiba DVD player does not play DVD

  "I have a Toshiba Satellite P300 1Ci and when I play a DVD with a Toshiba DVD player, I get an error saying:" kan niet naar een extern uitvoeren expensive video. Page External uitgang nagaoui u would beeindigd toepassing van El' or in my best English: cannot run the video to an external device. Check your configuration of the external port after you have completed this process.

  can someone help me?

  Hello

  Want to watch a DVD on the external monitor? Or can you explain what you mean with external device?
  Maybe the application should be reinstalled. You can download it on the Toshiba site.

  I don t use a Toshiba DVD player so I think that I can help you, but I use VLC media player to watch DVD s. It of a small video player that can play most audio and video files. It s really nice tool and freeware. You should try it too! ;)

• Satellite M40-145: CD/DVD player will not play some DVD

  Hello!

  I am the owner of a Satellite M40-145 bought a little over a year; DVD driver worked perfectly until three days ago, but today I discovered something... strange. Still, it reads the DVD business and burned the DVD + r, but apparently it does not read the DVD - r serious more. I tried with different DVD - Rs, I burned the same DVD player, without success; trying to access the DVD gives a message "insert the disk in drive D:".

  In this case, I'm talking about movies on DVD. Please tell me there is a way to fix this without sending the computer to the customer service...
  I wouldn't think he fell down a few days after the expiry date of the guarantee.

  Hello

  Well, you can try to remove the Device Manager order form.
  After restarting again the reader should be recognized again. Then, check if it is possible to read the DVD - R, CD.

  But the question sounds like a lens calibration error. If you use different media, the lens must be calibrated again. But if this procedure fails, the drive is not able to read or write the DVD for example.
  Unfortunately, in this case only the replacement of the drive will resolve this problem.

• Satellite A210 - 146:Toshiba DVD player no longer works

  Hi, I have a Satellite A210-146, and installed Toshiba DVD player has stopped working. He used to work, but I believe that there is some program compatibility issues. Is there a way to know which program it may touch without uninstalling or reinstalling programs?

  Any advice or suggestions greatly appreciated, thanks

  What happen exactly when you want to use a Toshiba DVD player? Is there an error message?

• Satellite U400 - failed to create the recovery disk - bad DVD player?

  Hi all

  I have a 13 inch Satellite U400.
  Due to problems with my Softkeys, lighting and hibernation status (any help on thos would also be useful) I want to create a recovery DVDs with the Toshiba Recovery Disk Creator.

  The thing is: it starts when I have a CD in the DVD drive, but as soon as I put a DVD in (what is needed), it gives me an errormessage that said something like 'another application is using this drive or no disc recording where found in the laptop. 0D00E4-F0-00000000 error code).

  My DVD player does not work properly, I can play movies and the drivers and the status is ok too.
  I noticed, that error code changes, but I don't know how to get the recovery disk creator will.

  What can I do? Change something in the registry?
  I don't know what happened on my laptop, I bought a few months ago - new. I guess that, reset everything would bring my softkeys, lighting and hibernation status back.

  So, if someone nows how to work at least one of the problems, please give me advice.

  Thanks in advance,

  wiglip

  Hello

  Did you create virtual CD/DVD drives with special software? If so, remove the software completely. In addition, if you have installed burning, programs, you should check if they will be started when Windows starts and if so, disable the beginning upward. So go to start > run > msconfig > start. Here, you can disable the start of burning software (for example Nero, CD Burner XP, etc.).

  And what DVD are you using for burning? I have good experiences with DVD - R Verbatim and TDK discs. These are high-quality discs and you should try it too!

  Last but not least, you need to remove the upper and lower registry filters. It is always advisable to the problems of the CD/DVD drive:
  (1) run Regedit (start-> Run-> Regedit)
  2) go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}
  (3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
  (4) restart.

  Depending on your problem with the keys to enlightenment that you should try to reinstall the Toshiba value added Package. This determines the buttons of enlightenment, FN keys and other special functions on your laptop. I had a similar problem with my Qosmio F50 illumination buttons and I posted something on this subject in the Qosmio forum that you should try it too!
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=165724

  Good luck! :)