E250 dead

Hi everyone, I'm new here. I tried to update my firmware - I have a 2Gb sandisk e250 - but after the update operation my E250 just died! Can someone help how to make it work back please? I can it turn on and turn off, I have only the blue ring on. I went through several steps recommended to recover, but none worked. I was not able to get this 'recognised' on my PC. The "hold REC for a maneuver WE"... didn't work. I have the blue ring in one market. FYI: I run Windows XP, I ran a firmware Updater but I failed to check the correct version of my E250. Thanks for any help. Kirsley

It won't be easy but:

Try this.

Tags: SanDisk Sansa

Similar Questions

  • My Sansa e250 v1 is VERY strange (memory loss)?

    Today, I downloaded new music and went to synchronize on the e250. My e250 2 GB (v1: 01.02.24A) was dead at first, so I connected on the computer to give a head start to recharge before starting synchronization. After that the music was supposed to be safe on my camera, I turned it back to check and make sure that it is there. Instead of some 300 songs , I've had before (I also have a Micro SD card of 2 GB in there) I find only 11, with the logo of what meant he was on the SD card. (If none of you have the small logo beside it, I apologize, but that's what mine did). When I open the files on my computer first, and then in my Windows Media Player, it shows all my music on the device and also says that the memory is always repeated. When I look on the device itself, he has only these 11 songs. I tried disconnecting and reconnecting the cable charger/sync, reset the battery, everything I can think of.

    ((On a side note, my computer don't bed the SD card when it is in the first mp3 player - it is not since after the first two times, I synced music with her inside. But there were songs that were the symbol of the SD card next to it in the drive. In addition, since the player has had the inside SD card, a small green window pops up on my screen after start of the original mp3 player, saying "refresh database". This has not been a problem until now, but I wonder if this is normal?))

    Any help is appreciated, thanks!

    If any of you have this problem: I just fixed mine.

    Make sure that you back up ALL your music files if you want to resynchronize, because the only way to get rid of this weird problem is to do a complete memory dump - this means entering the Sansa e250 files on your computer WHILE THE DEVICE IS PLUGGED INand delete ALL SONGS, ALL OF THE VIDEO, ALL of these files. NOT the files themselves, those you need. Just the CONTENT of them. Then go into any media player you use and re - sync all. Or what you want there, is irrelevant. Then you have the music in the back. I have no earthly idea as to how it happened. All I know is that I fixed it.

  • E250 SanDisk 2 GB MP3 Player - broke before two weeks, please help!

    Well, I enjoyed my e250 player renovated for about the first 10 days, but tonight it's dead.  Here is what happened.

    I was transferring some new music for the reader of my laptop.  After that I made and unplugged, I checked the player to make sure that all transferred correctly.  He said that nothing was there, no music at all the...  Well, I had not much there, so no BIG deal, I just start from scratch and put music on it again.

    When I reconnected it, or tried, to the laptop, suddenly the Sandisk flash the introduction screen, white titles on black background, but would never go beyond this, would never load.  Later even if it stopped, and now I have a blue wheel on and cannot get the thing to turn on at all.  If I connect it to the laptop, the laptop does not recognize it at all.  I guess even the lighted wheel will turn off soon, when the battery dies.

    What can I do?

    I this would come back to where I bought it, but it takes all the original packaging, which I threw it out after that everything worked fine for a week...

    Any help appreciated, because I really want to fix!

    Ouch!

    In retrospect, don't forget to keep your original packaging and received with any new device, at least for the first 30 days.  I would contact the seller, because they may be able to make an exchange for you.

    The key here is to present your case and to maintain a civil tone, despite the obvious frustration, as friendly conversation will often do the trick.

    If the unit will respond to the recovery mode, you can get to the top and running or the next step, e200tool.

    Read the thread "blue ring death" for more information.  I would try to Exchange everything first, as a few days.

    Bob

  • My iPhone is dead

    My iPhone is dead. Without doing anything from one moment to another, I was not able to put it on more. Any ideas what I can do about it?

    Try the procedure described here: If your iPhone, iPad or iPod touch won't turn on - Apple Support

  • I spent hours on web sites looking for advice clean my iMac - they were all dead ends.  I send a question to this 'Community' first, but must have done it badly because there was no trace of it.  I have the effect on this model beach ball

    I spent hours on web sites looking for advice clean my iMac - they were all dead ends.  I send a question to this 'Community' first, but must have done it badly because there was no trace of it.  I now have the beach on this computer ball effect.  Are there places I can delete cookies etc to help out?  Thank you for your help.

    horse8905

    Don't know what's happening, you do not give a lot of information, but if you have the constant beachballing (spinning wait cursor), which could mean that the hard drive is dying.

    Open Console.app in Applications > utilities. Filter, called "String Matching," right, high enter "I/o" without the quotes. What happens when you do this?

  • Dead watch - repair service apple request for transmission in French - no address?

    Is weird - we have a watch dead and filled out the forms online to send it in - service demand went- but no email was sent and no form, no label shipping, no instruction or web page indicate us where to send to!?

    Our "repair" status is blocked in-step 1: application

    What is going on?  The user interface for the service is horrible.  No idea what's going on.  No idea where to send them.  A 1 week wait 'permission' just to take it into a store local and even take it for repair.  The bloat and bureaucracy is palpable - I've used Apple products for 32 years, but if I was a user of 1st period (like my husband), this experience would lead me away!

    Hello...

    Sorry you're going through this hassle.

    At this point, it would be preferable to communicate directly with Apple > Contact - official Apple Support

    Or on Twitter: @AppleSupport

    Remember to follow the instructions to retrieve your ready watch for the service here > Apple Watch response Service - Apple Support

  • How do I know if a dead iPhone recharges?

    My iPhone 5s has temperament type, and I have to shake the cable around a bit before it will load sometimes. Normally, it's all right, because you are simply looking for the icon of the lightning next to the load indicator.

    On this occasion, the phone is completely dead, and now I can not tell of the enigmatic symbols on the screen tells me that he is in charge, and tells me that it needs to be plugged.

    Sometimes I have an empty battery with low power red icon, and sometimes I have the same thing, only with an icon of a connector of lightning at the bottom of the screen.

    Who's who?

    Left: needs to load, charger not connected.

    Right: must be loaded, load current.

  • Hi, I am looking to replace my battery. I have a MacBook Pro (13-inch mid 2009) and the battery is dead. How can I get a new one? Thank you.

    Hello

    I'm looking to replace my battery.

    I have a MacBook Pro

    Specs below:

    (13-inch mid 2009)

    Processor 2.53 GHz Intel Core 2 Duo

    Memory 8 GB 1333 MHz DDR3

    Graphics  NVIDIA GeForce 9400 M 256 MB

    Software  OS X 10.9.5 (13F1911)

    Built-in display: 13 inch (1280 x 800), NVIDIA GeForce 9400 M 256 MB graphics card

    Big problem is that my battery is dead.

    (1) what is the best battery you could recommend.

    (2) where I can source for this battery.

    Thanks - Nairobi - Kenya - currently in Zambia

    Your best option take it into an Apple store. And get it replaced.

    Alternatively, you can buy one here https://eshop.macsales.com/shop/apple_laptop/batteries/MacBook_13_Uni

  • How to unlock my dead uncles iCloud account?

    having a problem with my dead uncle's iPhone 6 on how unlock his account iCloud

    The only way that you can be able to get the Activation lock removed is if you provide a death certificate and the original proof of purchase for the device. Take it into an Apple Store. They will have to determine if they have enough information to disable locking.

    Good luck

    GB

  • The version of ESR on the ftp site is exceeded - the ftp site is dead?

    Munki allows us to deploy the version of ESR of Firefox. Normally, we check the updates here:

    http://FTP.Mozilla.org/pub/mozilla.org/Mozilla.org/Firefox/releases/latest-ESR/Mac/en-us/

    However, the version here (from today ' hui - 10 Nov) is always 38.3.0 - and not the current 38.4.0

    This FTP site is dead? Or someone not the update? (One wonders if he is dead because the no - ESR 'releases' subdirectory has no consumer 42.0 version either...)

    Thank you!

    -Steve

    Hi steve, https://archive.mozilla.org/pub/firefox is maintained for mozilla software download directory.

  • I have an iphone that I inherited my dead aunt.  How to re-enable it for my company?

    I have an iphone that I inherited my dead aunt.  I would be able to reactivate it to my own cell phone carrier?

    You will need a notarized copy of his death certificate, evidence that you were indeed the legal device heir and the evidence that she was the original owner before his death. Take these as well as the phone to your local Apple store where they can help you.

  • When a Apple Watch looks dead

    They gave me a Apple Watch for my birthday in may 2016. It has worked perfectly since then - until tonight.

    I went to check the time a few minutes ago, but the watch appears to be quite dead.

    I was it load every day night - it's usually about 65%, when I go to bed. There has been no sign of battery problems.

    None of the controls on the watch, or the display has no effect. I put the watch on the charger but nothing happens, except the charger get very hot.

    Before returning the watch, is there something that I do not I can try?

    Hello

    Try restarting your watch force: hold down the side button and the digital Crown for about 10 seconds, until you see the logo.

    If this does not help, then try to charge your watch for about 2.5 hours, making sure that you follow the instructions from here:

    After this period, if it has not already restarted automatically, remove it from the charger and:

    -Try to restart it (by pressing the side button until you see the Apple logo).

    -If necessary, then try force it restarts again.

    More information:

    If your Apple Watch does not respond or won't turn on - Apple Support

  • Dead Pixel 6s iPhone 16GB

    I got my iPhone at the end of May.

    I had to restore my iPhone and connect it to another computer, because when I tried to transfer my music to a new laptop, he stated that it could not be established with two different iTunes.

    After putting my iPhone in about a week, he now has a pixel on the screen it is on the upper left side, but kind of more in the Middle, not under the name of carrier. There is also a blackish research brand. I don't know if it is also a pixel or something else.

    It is not on a screen protector I've ever had a still.

    On any page of safari or white page on the iPhone, it is clear and hard to miss the black mark and if you look carefully at the tiny pixel.

    I have never dropped my phone and kept in excellent condition.

    Apple will replace my iPhone? I have the Apple Care 1 year warranty.

    The iPhone was bought directly from online from Apple for $1006 site, I didn't buy Apple Care +.

    Will Apple Replace this screen for a price of replacing it for free?

    Thank you

    Dead pixels are covered by the warranty. Take your phone to an Apple Store and they will test it. I had an iPad replaced for free as collateral because of dead pixels.

  • How to find the serial number of the processor in the MacBook pro s serial number? I have a dead MacBook that was given for service to a third party. I doubt that they have replaced the original parts. Help, please. Thank you

    How to find the serial number of the processor in the MacBook pro s serial number? I have a dead MacBook that was given for service to a third party. I doubt that they have replaced the original parts. Help, please. Thank you

    As far as I KNOW, the serial number of the MacBook does not have the serial number of the processor.

  • Cannot use the option button to access the folder of bookmarks hidden on a dead drive

    I'm on Mac OSX 10.7.5, and I can easily access the folder on my current drive by pressing the option key (so that the hidden library appears) then get bookmarks of otherwise hidden files (since it's my new boot drive)

    BUT

    I need to copy / move my LAST favorites since ten days previously, a dead hard drive. The drive is usable, just not able to start.

    BUT

    Since this amazing new 'hold option on GO in the Finder menu to see the invisible library feature' (sarcasm) requires your operating system to be started, I can't access the bookmarks folder in the library. How can I do this if the Finder is not started on the dying drive? Is - this make any sense?

    Check this?

    COR - el said

    Try:

Maybe you are looking for

  • After upgrading from firefox (on MAC), whenever I start Firefox it is an installation open - dialog box that I can't understand how to remove.

    I used Firefox without problem, on my Mac, for several years. I've recently updated to v22.0. Now everytime I open Firefox, there is a dialog box (marked "Firefox, 2 parts in stock") that appears with the Firefox icon and arrow pointing to the right

  • Envy 7640: Envy 7640 out automatic tray extension

    Is it safe to manually push in the extension of the tray out Auto after turning off the printer? I don't want to break it, but the part extends a bit and I don't want the snag on something or it stand out when it is extended. Since it extends automat

  • Getting started with my Canon T1i

    I just bought for me a Canon T1i (body only) for Christmas to use for astrophotography. I'm having some trouble getting started and am hoping to get answers from here. First off the coast of British Colombia, I use this for astrophotography I did not

  • Pavilion 15: get a new motherboard

    I need some tips to get a new motherboard for my laptop (if possible). Here are the specifications of my laptop: Model--> 15 number - e052se Product number--> E0Y23EA #ABV Operating systemWindows 8 64-bit language CENTRAL PROCESSING UNIT Intel Core i

  • Try to connect the second monitor to LC

    Im trying to run my Optiquest Q7 monitor as a second monitor and try to expand what is on my primary monitor to the Optiquest for the life of me I can't fiugure it out... help please...