My Sansa e250 v1 is VERY strange (memory loss)?

Similar Questions

• Sansa e250 2 GB limit card memory?

  Is the limit of the size of the memory of card Sansa e250 really 2 GB or someone was able to recognize up to 8 GB or maybe even 16 GB with some brands of SD Micro cards?

  Depends on whether it is a v1 or v2 model.

  V1 is limited to 2GB (SD) unless you install the 3 rd-party firmware, alternative called Rockbox.

  V2 will handle the SDHC (up to 32GB) native format.

• Sansa e250 questions

  Hello

  I'm new to this Ant thing, and I don't know if this problem has been addressed before, but it would be great if someone could help me!

  I got my sansa e250 for about 2 or 3 years now, I guess, and it has always worked well.

  I turned on the other day and tried to play a song, but it says "wrong track." I know that this can happen sometimes and thought nothing of it. but he spent with all the songs I played.

  In addition, the player was all deleted music out of my playlists and when I went to view album and artist, he said that he had nothing. but according to the song, he said I had 754 songs out there.

  I connected it to my computer and deleted everything on the player, it works and it was always in the same situation, with 754 songs, artists or albums and they were all the "bad tracks!

  very frustrating. I have tried everything I can think of, like everything reset and take the battery, all with the same result!

  When the device is plugged into the computer, it shows all the folders are empty. It is said that no space of memory has been used, there still 1.8 GB of left of the Hall. (what a 2 GB device)

  so if anyone knows what the hell is wrong with it or what can be done to remedy this, it would be greatly appreciated!

  Thanks in advance!

  It is possible that your cord is wrong. But try to reformat via Recovery Mode. I hope that your E250 is a unit v1 - you won't see Welcome to the recovery on a v2 Mode, so we need to try something else.

  It's the excellent Markster step by step:

  Now, to solve the problem.  The easiest way is to just reformat the drive in Recovery Mode.  This will delete all your files, however.  Here's how:

  Turn off the player.

  Slide the HOLD switch to the locked position.

  Press and hold the RECORD button when connecting to the PC.

  RECORD output once you see "Welcome to Recovery Mode" on the screen of the reader.

  You should now be able to find that a new removable drive in my computer called 16 MB-FORMAT.

  DO NOT TRY TO FORMAT THE VOLUME 16 MB-FORMAT!

  Are we clear on that?<>

  16 MB - FORMAT open and create a new folder named sansa.fmt on it in the root directory.  You can now slide the HOLD switch to the unlocked position, use the remove safely icon and disconnect the player.  It will be noticed the sansa.fmt folder, and he saw, format itself and reboot.

• Connect Sansa e250 to my audio devices via USB

  Hello

  Connect my sansa e250 to my Denon amp via USB only pieces of audio file of fixed drive will not play anything micro sd expansion port why? Using the sansa E250 01 software
  I would like to say good quality is achieved via USB and I can use the Denon remote

  When the sansa e250 USB connection port denon amp using rock box will not work
  Let's get only by jack stereo 1/4″ but will play music mm two disks

  Help

  Hello
   
  Yes, I should of said unit Sansa MSC mode, if I put in the MPT mode denon amp will not read the sansa e250 arrives with disconnection.
  I know that's not very common. I just bought a sansa fuse with more memory, but I was just wondering if there is any way to be able to have access to the micro SD and card.
  Thanks for the reply.
  Terry

• Sansa e250 45 second each time start?

  Is this normal for Sansa e250 refresh database whenever it is turned on, even if nothing has been added or removed from the player?

  It's annoying to have to wait 45 seconds until I can start listening to my music, listed on the radio or use the voice recorder to record something

  If it is a v1 model and you have a card inserted, Yes. It will refresh the database whenever you turn it on. If no memory card is inserted, it will not be.

  This changed when the v2 of the e200 Series variant arrives on the scene. A different processor and firmware eliminated the need for the update at startup when a card is detected in the slot.

• Problem of micro card SD of Sansa e250

  I have a sansa e250 its works perfectly, but the problem is

  on the micro SD. I have sandis micro SD 2 GB card and I want that it

  to use with my sansa e250 but when I insert the micro SD card

  and connect it to my computer sound empty, no micro SD card.

  my PC can not read the micro SD it is drive: j and reader: k

  but the reader: k says pls insert a floppy in the drive: k, but I fit

  the micro SD card.pls help me!

  firmware version is 1.02.15A

  Edit: I update my sansae250 to version1.02.24

  and then I try to reuse my micro SD card

  and its does not work. What should I do with my sansa?

  I want to use the micro SD card because its only 2 GB.

  With your v1 player (as indicated by your firmware version) you can only use MSC mode when it connects to your computer in order to access (add or remove) songs on the map. MTP mode will not work. Period.

  As c1u31355 suggested, make sure that the card is placed properly into the slot on the side of the player. The lttle Ridge or bump in the middle of the edge on the map will be little difficult to get through the first few times you push the card. Then it wear out a bit on the edge and slide smoothly.

  

  Push it all the way, even slightly beyond the opening until you hear a slight click. He's going (to spring) very slightly here where the top edge of the card is more or less equal or slightly superior to that of the housing of the drive. You will hear a 2nd click. Pressing in there again until it clicks (you should probably use a nail) again, it will release and spring will push out so you can catch it.

  Moreover, just for precision, the card will in the drive upside down (with the bump on top).

  -------------------

  c1u offers a card reader to see if you have a bad card, or if the problem is with your player. If you put the card in the card reader, and you can transfer (drag & drop) of music files, your card is OK, and you might have a problem with the drive.

  Just so you know, you can not 'sync' music to the card if it's how you normally do. This would require the MTP mode which will not work. You have to do drag & drop from the computer to the card. It's the only way. Well, actually you can rip directly to the card, but that's another topic.

• Micro SDHC not recognized Vista when the card is inserted in Sansa E250

  Hello

  I have Sansa E250. I used to have the 1 GB microSD card and I was able to access it on my computer with XP.

  Recently, I bought 4 GB micro SD and SDHC cards. Now I have Vista on my computer and when I connect the MP3 player with HLA card installed on a computer I'm not able to access removable drive of the card and I get an error message.

  Is it a Vista thing? Is there some drivers or firmware that I need to install to be able to use my new card CD?

  How do I install it on my Sansa?

  Thank you

  I installed the Rockbox on my Sansa e250 and it works very well and the new 4 gb SD card works as well.

  I can't load the image well then rockbox is on my presets of radi got all erased. But these questions are fine. I can always switch back to Sansa Firmware.

  Thanks again for your help

• Satellite Pro 6100 - battery acting very strange.

  As mentioned in the title, my laptop battery is very strange.

  The symptoms are:

  When the battery is flat after only 7-10 minutes he turns not, however if the battery is removed and placed in the laptop, the laptop will start as it has never happened.
  Not only that, but the bonus after the first can indefinitely until this that loaded into an OS and immediately after starting start the laptop stops due to an apparent lack of power, when there is power always, enough to do the same thing again. Also, the battery can still start even after being just in a freezer.

  This reacondioned back to normal battery or is this safe to use battery?
  Thanks in advance!

  Hello

  I guess that your battery is old like machines of this Satellite Pro 6100 and maybe it can't be charged more. In this case, your battery should be replaced.

  But even if the battery is faulty, you should be able to use the device connected to the power adapter.
  So even if the battery is removed, you could power the unit with the mains.

• Problem with sansa e250

  I have a proplem with my sansa e250 after upgrade. Now, I can't start my sansa. The sansa is frozen. Simply appear SanDisk logo on the screen, the blue wheel lite and that's it.

  I tried several times to reset it by pressing the power on button (menu) for more than 15 sec. It power from this, but when I try to start it again the problem persists - sansa e250 froze after sandisk will apear on screen logo.

  Please help me

  I'm in recovery mode. I downloaded a safe recovery tool (e200fw01.00.12), but when I start it up I got a message from what ERROR Application failed to read the version details!

  I find that I have to put some mi4 file in 16 Bit file. What is it? Where can I find it?

• impedance of sansa e250

  What is the impedance of sansa e250?

  http://forums.SanDisk.com/Sansa/board/message?board.ID=clip&thread.ID=19390

  answered by marqck

  It is 16ohms. 32 works great but greater than 32 will give you some crackling noise. It is not as strong as the 16ohms 32 ohm headphones.

• Will be for Sandisk Sansa E250 travel charger / E260 / E270 / E280 also charges the "rocket" SanDisk?

  Will be for Sandisk Sansa E250 travel charger / E260 / E270 / E280 also charges the "rocket" SanDisk?

  Thank you

  Yes.

• Can someone help me with this problem of very strange wireless networking? (intermittent connectivity)

  So I'm having a very strange problem with my wireless adapter. (surprise, right?) Let me explain just what is happening here: I will use my computer, online, do a lot of things like play games or surf the web. Randomly, for no apparent reason, my wireless adapter disconnects the current network disconnect myself from everything I do. When I check my available wireless networks, I can't see a single network. This has happened to me for a while. When he started it first, I tried many things including the uninstallation of a reinstall of my adapter without success. I have to restart my computer to fix. This happens from time to time and has not stopped since the first occurrence. Originally, if I would try to find a network or uninstall/reinstall, my computer would be soft locking and I would be able to use the windows closed functionality, it would just hang out there indefinitely until I hard loaded. Now its being less skittish and let me do a reset software to fix, but it becomes very annoying. I know this isn't my router because all my roommates can still connect to the network very well, and the router will not prevent me to see many (15-20) wireless networks in the region. If someone can help me even by some light on what is happening, I would be very grateful, because I'm getting very frustrated by that. I reinstalled the map, he pulled for dust, etc. etc. It is not usb and its actions with the system. The Device Manager it says as a 802.11n wireless adapter PCI Express LAN Card, manufactured by LITE-ON TECHNOLOGY CORPORATION. Connected to the 4 PCI bus, device 0, function 0.

  Thanks in advance:

  Justeroo

  Try without commitment TCP/IPv6 (which is done by going to network connection > click > properties > it uncheck > OK.)

  http://digitalmediaphile.WordPress.com/IPv6-how-to-unbind-from-a-NIC-in-Windows-Vista/

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot sync Sansa e250 with Windows Media Player on Windows Vista

  OP: MP3 player does not connect. Sansa e250. Has worked before. Windows media player does not. Meter turns, but does not sinc for Windows Media Player

  Please help me solve this problem.

  Hello paj137,

  1. do you have an error when attempting to sync with Media Player, or everything just doesn't detect media player?

  2. don't you make changes to the computer before it stopped working?

  3. will the player detected in Windows Explorer?

  First check to see if the drive is detected on your computer. Try to copy the files of music from Windows Explorer.

  Most MP3 players will appear as a "disk" on your computer, and you can browse the files on them by simply opening.

  If you can do this, you should be able to copy / delete / move files between the MP3 player and the computer.

  Also try to set media player to manually synchronize with Media Player. This article should help you with that:

  http://Windows.Microsoft.com/en-us/Windows7/sync-manually-in-Windows-Media-Player

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Very strange problem with quick mask

  Hoping someone can help me with a very strange problem that just started to happen when I enter the quick mask in PS CS5. Let me guide you through the problem.

  (1) I opened my image in PS, go in the Mode mask quick and 'paint' my image in translucent red with a brush (100% of opacity, brush, etc. normal mode).

  

  (2) once I fully painted my picture in translucent red, I leave the Quick Mask mode and the area outside the translucent red is selected. I hit M for the marquee tool, right-click on the picture I have just painted and choose 'Select inverse', which then selects everything within the translucent red area (note that I made this a million times over the years).

  

  (3) my image is now selected. In general, what I do now is cut (cmd + x) that selected the image and paste it into another canvas, generally where is my biggest project. Whenever I did it, the image cuts and fits exactly as it is seen and leaves an empty space in the original image. However, when I cut it now, it seems to cut a transparent version, leaving behind a transparent 'ghost' of the original image.

  

  (4) then when I paste the image cut in a new canvas, it is transparent as a default value.

  

  I checked the transparency of all the paintings, and they are set to 100%. As I already said, I cut from images of no solid media using the quick mask all the time and it's never happened before. In fact, I made this weekend and it has only just begun in the last hour, so I think I clearly something clicked or activated a parameter without realizing account!

  In considering this explanation, I hope someone knows what is causing my pictures to cut and paste transparent after that I used the quick mask. It certainly is driving me crazy!

  Any advice or assistance would be most appreciated.

  Thank you

  In your first screenshot the color of foreground in the Toolbox is not 100% black (RGB 0,0,0)

  Until you try the quick mask, press D to set the foreground on black (RGB 0,0,0)

• When I make a rectangle, the left and right edges are a bit fuzzy and thicker, then the bottom and at the top. It seems very strange and I don't know why that is.

  When I make a rectangle, the left and right edges are a bit fuzzy and thicker, then the bottom and at the top. It seems very strange and I don't know why that is.

  I made a new document (72 dpi, preview mode: by default) and I tried to see if it's the same thing on another screen, and it is.

  I thought that the problem would be with the 'align on the pixel grid' property but by activating / deactivating it doesn't matter. Maybe it's something with anti-aliasing? "Work of anti-aliasing" is checked in my preferences...

  

  Here's an example, zoom level 100%.

  The forms do not look sharp at all. No idea what this can be?

  Lieselot,

  Or you can try to switch between the GPU and CPU by pressing Ctrl / Cmd + E, or you try disabling GPU performance by clicking on the icon of the rocket in the bar of the App, or on the top of the menu bar, deselect the box Performance GPU. You may also uncheck performance GPU in your preferences.