E4200 Auto Connect issue

Similar Questions

• TMS 14.3 - auto connect problem - multiple call attempts

  Hi people,

  I have a client with an environment with TMS 14.3, conductor XC 2.2, VCS 7.2.2 TP Server 3.1 and CUCM 8.6.2. They have several items on VCS and several endpoints of CTS/TX registered to CUCM Cisco and Polycom endpoints. There is a trunk SIP between CUCM and VCS. Conductor is integrated with VCS by using the B2BUA deployment model. TP server is behind the driver used as multipoint resource only for conferences scheduled through TMS.

  We are having problems when planning a Conference at TMS using type "Auto-connect" and setting driver to dial a number to the selected participants. For some end points when the meeting starts, conductor made several calls try to participants, even after participants answering the call. For example, conductor connects to an endpoint 3000 CTS, CTS answers the call and connect to the meeting, but a few seconds later, conductor's call another attempt at the endpoint, then endpoint answers the second call and put the first call on hold.

  This problem occurs for the following parameters:

  • Endpoints of Polycom HDX series
  • CUCM items of endpoint CTS/TX
  • Outside dial participants (those selected on the tab 'External' to the planning page)

  The problem does not occur for any endpoint TC registered in VCS.

  As a troubleshooting step, the client was trying to configure TMS to try to connect to the participants once (using the "Attempts to connect for scheduled calls" setting value 1), but the issue still occur.

  Tomorrow, I'll be on the customer's site to check if this strange behavior has been generated by TMS or by the chef himself. I really think that it is some sort of bug. I don't know that their environment has been configured properly according to the Cisco documentation, because I was the person who made the project.

  I'd appreciate any suggestions really.   =)

  Thanks in advance.

  Paulo Souza

  My answer was helpful? Please note the useful answers and do not forget to mark questions resolved as "responded."

  Hi Paulo,

  a few days back we had seen this problem and I filed the bug "CSCui90143."

  Currently, we anticipate that this problem occurs because the MSD is not able to understand the message of feedback from the conductor.

  I hope that clarifies. I don't have to if you want to be able to access the bug or not.

  Rgds

  Alok

• connectivity issues mobile iPhone 7

  I have a new iPhone 7 jet black, so far I'm in love. But yesterday, I noticed an annoying problem. The phone loses the network connection (cell to the & t) and he no reconnect, it will remain just it saying no service. I have to go in airplane mode and outside to force it to look for the network connection.

  everyone knows this? and everybody understand what it could be?

  I already missed messages and a phone call. This could worsen as boring to become a problem. If anyone has any idea what this could be please give me a heads up!

  OH! Another thing I noticed, when the iPhone is connected my signal strength went from-102 to my 6 sec to-86 on my 7! Then when I am connected I am connected!

  Hello jpgraphx,

  Thank you for using communities Support from Apple. I know have a cell connection issue on your new iPhone, it's not what you expect. The good news are the following steps will help to solve your problem with loss of cellular data and see no Service and get your new iPhone works properly again.

  If you cannot connect to a cellular network or cellular data

  See you soon!

• Mac pro wi - fi connectivity issues

  I have the same problem, it seems that many people have with Wi - Fi connectivity issues.  I just bought the Macbook Pro in December 2015.  My computer goes to sleep and when I open the hood it looks like I'm connected to wireless, but I'm really not!  I'm going to websites, and they won't open.  I disconnect my wi - fi and reconnect and sometimes it works, but sometimes I actually have to restart my computer.  For the moment, at the end of the day I'll stop my computer, then restart the morning I guess.  It sometimes seems to lose its connection during the day too, I guess because he falls asleep.  Very frustrated.  Just got this computer in December and have had this problem since I use the computer out of the box.  I was told it's because I haven't had my update of El Capitan, did, but it wasn't the problem.  Technical support suggested a few other things we also went through and those who did nothing either.  Don't know what the problem is or how to solve this problem, or even if I can if so many others have this problem.  I think it's a matter of Apple and the wish that they would be admitting the problem and try to find a solution.  Apple of love, but right now quite disappointed.  Quite expensive computer for issues that I am.  I went from a Dell for an Apple thinking it was the best thing since shirt pockets, hmmm...  I don't think it's any problem with our modem, wireless, router, etc., because we have other laptops, iPads, iPhones in this House and have NO problem.  So, I hope that everyone is not running out to buy new routers and modems because no doubt this is the problem at all.  PLEASE APPLE, DO SOMETHING TO FIX THIS!

  Hold down the Option key while you click on the wireless icon in the menu bar. You get a screen similar to the following:

  

  what you get for channel and mode PHY?

  What CISOS or the signal strength?

  What emission rates?

  very important and how many other networks do you see?

• Hi my game Center leaves me not to accept friend requests, load any games im unable to load data because of connectivity issues and the King Games I have when you want to send queries, you need to connect whenever fbk his shit

  Hi my game Center won't let me load any games or accept friend requests and when I try to accept queries etc. of friends on my King of games it's connect to facebook every time his shit. phone says on the game center connectivity issues I am not worked before

  Hi, kitecatgirl.

  Please visit Apple support communities.

  I understand that you experience connectivity problems when you access Game Center accepting friend requests.  Here are some troubleshooting steps that I recommend to go through this problem.

  Get help

  If you are unable to connect to Game Center or stay connected, follow these steps:

  1. Make sure that you are connected to the Internet.
  2. If you cannot create an account or sign in to Game Center of in a game, try to create an account or sign in with the Game Center app.
  3. Sign out of Game Center, then reconnect. If you can not you connect to Game Center with an Apple ID, reset your password, or use another email address. To manage your Apple ID, see my Apple ID.
  4. If you use a connection Wi - Fi, be sure that your Wi-Fi router is configured for Game Center.
  5. If you can't connect to a Mac, continue with the steps to solve the sign in questions.

  If you have a problem with a game of Game Center, follow these steps:

  1. Make sure you have the latest version of the game. To check for updates, go to App Store > updates.
  2. Test your connection by using a different game. If you cannot connect with a specific friend or player in multiple games, they might need to check their Wi - Fi connection and router settings.
  3. On iOS, try opening the game to the home screen, rather than the inside Game Center.
  4. If you cannot resolve the problem, follow the steps described in the next section to report the problem to the developer.

  Game Center on your Mac or iOS device using

  See you soon

• Pavilion g6: Atheros connection issues with Arris Modem

  Hi, I had the same problem with my laptop and Atheros network card, windows 7, it can not connect to the network with Arris modem but it works with other modems. I downdoaded the driver from the link you provided here, and it worked, my laptop connected to the network without problems, but after a month it stopped connecting to the network, I downloaded the driver again, but it did not work.

  @s_z,

  Hello and thanks for posting back.  Here is a link to a solution to problems of common connection to the problems of Atheros WLAN Driver and connection.

  Atheros WLAN Driver corrects connection issues with many new routers (Linksys, Netgear, D-Link, etc...)

  Please let me know how things are going.  Thanks again for posting and have a great day.

• HP dv7t 7200 wifi like no auto connection

  whenever I turn on my laptop, it connects to the WiFi for a short period of time and then dissconnects and I have to reconnect to the network manually. After doing this, it takes an extremely long time to login automatic and says "network connection takes longer than usual. I have the wireless card/adapter "Intel Centrino Wireless - N 2230" and the driver version is "15.10.3.2" I don't know if it comes to the latest version, but I tried to update and was not able to do this successfully. any help would be appreciated thanks in advance. This happens also on any wifi I connect, wi - fi even I log in for the first time takes an extremely long time to connect (2-5 minutes).

  any help to solve this problem for my computer to quickly connect / auto connect to networks again would be greatly apreciated.

  p.s. I've ever experienced this problem when I got the laptop first, so I don't know that it's happened in the past 6 months - 1 year.

  

  I managed to sucesfully (at least temporarily) fix the slow connection error by uninstalling my network adapter (I left her uninstall driver box unchecked during this operation) in devices, reboot and then Connection Manager. It is connected to the normal speed. I have not yet tested to see if the same problem has been resolved, but I'll come back to that when I test it later.

• Linksys E4200 and connectivity Motorola SBG6580

  Here is a picture of my home network. The problem I'm having is, I can't get the WD MyBook Live Duo to be seen on the entire network. If it is connected to the Linksys, all computers connected to the Linksys can see it, but not those related to the Motorola. If I put it on the Motorola, the same thing happens, but in the visa versa. I bought the Motorola for its DOCSIS 3 capabilities, not for the wireless. I prefer to use the Linksys Wireless. Any help would be greatly appreciated.

  

  Devices must be on the same subnet (e.g. 192.168.1.x) to be able to see each other. You could make the Sb IP 192.168.1.1 and 192.168.1.2 for the E4200 and connect a cable from LAN of the SB E4200 (not WAN) port lan port.

  Here is a guide if you need: http://www6.nohold.net/Cisco2/ukp.aspx?pid=80&vw=1&articleid=3733

• Remote Access Auto Connection Manager and error with a VPN work

  I use my laptop to connect to my VPN working. It has not worked since June 24, 2010. I get a message indicating that the connection to network access device is not found. I also have a problem with the connection manager automatic remote access. I'm trying to launch and get an error code 5, unauthorized. The Auto Connection Manager remote access has something to do with the vpn access problem and if so how can I solve this problem?

  Hello hitherandthee,

  Your question of Windows Vista is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the platform of networking on TechNet. Following your question thanks for posting the link below:

  http://social.technet.Microsoft.com/forums/en-us/winserverPN/threads?page=10

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• disable the option to auto-connect to any wifi network

  I managed a number of tablets for the work. We have win 7 installed. Sometimes users to connect to their home wifi network - or other wifi networks as required. but it is essential that the Tablet does not automatically connect to a network at startup. I understand, it is possible to uncheck auto connect once a network has a profile, but I would prefer that there is no option to auto connect at all and if there must be than the defult do not do self rather than auto connect by defult?

  Thanks in advance for your help

  Hello

  There is an easy way to start the computer disconnected with wireless.

  1. Command line opened as administrator by right click on CMD Run As Administrator
  2. This command to type: sc config Wlansvc start = demand
  3. This will set the service WLAN to the on demand service which means user must initiate the connection after the start
  4. You can then create BEATS with this command, the user can activate/wireless:sc start Wlansvc
  Let me know the results and if this is the solution you need. You can set it back to the original of the application settings to replace withauto

  Kind regards

  Helene

  Is this useful? Then please click the button to Vote as helpful . Is that an answer? Then click Mark/propose as answer

• What is the number of attempts to "Auto-connect" in MSDS.

  Hello

  I would like to know, how many times a TMS would attempt a point of termination/MCU while trying to send shout information - before you say

  'Allocate failed, the Conference is not automatically connected.

  The type of conference is auto connect

  Automatic connection: Cisco TMS will automatically connect participants to the date and time specified.

  Hello

  Seems more like a first try and then try to re 3-tent after the initial report and it seems to be the same for the CHT and the MCU.

  So 1 initial attempts + 3 before it says it can not it automatically connect.

  / Magnus

• RV042 VPN connection issues

  Hello

  I've successfully connected two RV042s to establish a VPN gateway to connect to a VPN gateway. I have follow up questions, please comment:

  1. I want to keep the time of indefinite VPN tunnel connection. Is it enough by ticking the 'Keep-Alive' on the VPN-> gateway-to-gateway-> page in advance? Or, I ping the RV042 periodically?

  2. the "Phase 1/Phase 2 times of HIS life" (on-> page from gateway to gateway VPN) settings have no impact on the maintenance of indefinite time of VPN connection? What are the optimal values for them?

  3. is there an API, command or a script to replace a manual by clicking on the button "CONNECT" to establish the VPN to VPN tunnel-> summary page? Or, is there a way to achieve the power upward?

  4. is there a way to establish a VPN tunnel bypassing the connection and clicking on the button "CONNECT"? (Auto connect to power up)?

  Thank you in advance for the comments.

  Steve

  Hello Stephen

  I have a question as well. We have a RV042 that does not restore the connection

  unless we hit the Connect button. Then everything is fine - after a while he gave up the connection

  Yet once and we have to connect and log in again

  Still having the problem?

  Mike

• Connectivity issues while trying to connect in spades to MSN on the computer

  * Original title: msn Spades - he works?

  I can't log on to msn Spades; something about connectivity issues; can someone help here?

  Hi Steve-Bob,

  Thanks for posting your question in the Microsoft Community Forums. I'm sorry to hear that you are facing connectivity problems while trying to connect in spades to MSN on the computer.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this.

  I would like more information about the issue.

  1. What is the exact error message?

  2. what browser you're using connection?

  3 have there been recent changes made on the computer before the show?

   

   

  If you are using internet explorer, please follow these methods and check if it helps.

  Method 1: Verify the problem by running Internet Explorer mode without modules.

  Temporarily disable all add-ons to see if the modules are the origin of the problem.

  To temporarily disable all add-ons:

  a. click the Start button.

  b. click on all programs, accessories, and click on system tools.

  c. click on Internet Explorer (No Add-ons).

  If the Internet Explorer (No Add-ons) mode works very well then an add-on may be causing the problem. You will need to re-enable each (process of elimination) in order to determine which one is causing the problem.

  http://Windows.Microsoft.com/en-us/Windows7/Internet-Explorer-Add-ons-frequently-asked-questions

   

   

  Method 2: Optimize Internet Explorer and check.

   

  How to optimize Internet Explorer

  http://support.Microsoft.com/kb/936213/no

   

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

   

  For more information, visit the following link.

  Sign in using

  http://zone.MSN.com/en/support/article/supporthubsignin

   

   

  If the problem persists, feel free to let us know. It is our pleasure to be of service.

• Database MS SQL Server with AIX server connectivity issues

  Hi all

  I am confronted with the below with the AIX server connectivity issues.

  Operating system: AIX 64 bit

  DB: SQL Server 2005

  EPM Version: Hyperion 11.1.1.4

  Error creating socket to host and port 1433. Reason: Connection timed out: could be due to an invalid address

  Tired of Solution

  (1) checked the properties of TCP/IP, its permitted.

  (2) ping the source and target servers both ends all works fine

  (3) firewall is DISABLED in DB Server

  Hi all

  My apologies, its number of firewall & network. Resolved by the Unix administrator.

  Thank you

• SCSI local data store connectivity issues

  Hi all
  I installed the server ESXi 4.1 before six months. now, I've seen continuous events related to data store connectivity issues. I changed the SATA cable also, but it won't help. How can I fix this without interrupting the VMs.

  As ESXi before 5, it is located on the var

  You can find them easily by starting from the root directory of newspapers:

  var/log/messages of cat | grep vmkernel | less