EA3500 unable to connect my HP LaserJet P1005 through the usb port on the router

Similar Questions

• Unable to connect to internet on laptop using the router wireless netgear WGR614 v9 and windows 7

  My office that I use as my host computer running Windows XP. I have a wireless network works on another laptop also on Windows XP, but cannot get a connection on the second laptop that is running Windows 7. Just bought from a friend. I appreciate any help you can give. The laptop has a Wi Fi sticker on it, so I guess he has the ability to connect. When I try to connect, it will ask me a security key. I put the safety key in and it said possible key is not. Don't know what else to do. If I run an ethernet cable from the modem and connect it to the laptop, it will allow me to connect to the internet.

  Thank you

  precionist

  Hello

  Look in the Wireless Manager and delete everything that is there.

  http://www.ezlan.NET/Vista/wireless_manager.jpg   (Control Panel, network and sharing Center. Upper-left click Manage wireless networks.

  After cleaning, connect from taskbar tray wireless icon.

  Given that your wireless network is more in the preferred list, it will prompt for the password. Put the password that is current, and if all goes well it will connect.

  If the password does not work the newspaper to the router with a cable and restore the password.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Unable to connect to a network or to the Internet on my Dell XPS1530.

  Unable to connect to a network or to the Internet on my Dell XPS1530. When I try to diagnose problem, I get a message that reads "Network Diagnostics cannot run because the Diagnostics Policy Service is not running." Having exhausted the patience all the phone with my IP and Dell, which tells me that it is a problem of Microsoft software. I have two other computers and a PS3, and I am able to connect to the Internet through one any of them. The XPS works under Vista with SP2. Can someone help, please? Thank you.

  Go to start / Control Panel / Administrative Tools / Services and go to diagnostic policy Service and set it to automatic and start it.  If it does not start, check the dependencies and make sure they're too automatic and rnning.  Then see if you can run Network Diagnostics.

  You can get in trouble with your device drivers.  Go to Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get drivers (and you should get those developed to date for the network card and regardless of the device you use to connect (such as a router wireless or such) and all you have time to do - they can help way beyond simply solve this problem), let the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows:http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows:http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

  When I'm in a lke your situation, I usually start from scratch.  Create a new network connection by ensuring that all settings are correct.  Check all the cables (if there is).  You have already reinstalled the drivers - make sure that no firmware or software is also necessary.  Configure the network sharing settings and make sure that you are ready to discover the network and such.  Check other computers to see their settings to make sure you get yours right and essentially the same thing (the same exatly so is another Vista machine connected in the same way).  Go to start / Control Panel / Internet settings and make sure that it's too fixed properly.  To connect, then try again. If this is not the case, remove some time to cool down and then start again with another new connection.  It's almost certainly a parameter that is not correcct (something no doubt very simple).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Hi, I have a camcorder Sony TRV 356 I am unable to connect on vista or windows 7 via USB

  Hi, I have a camcorder Sony TRV 356 I am unable to connect on vista or windows 7 via USB

  Hello Sajid,

  The community here is about the countries United States, Canada and Asia-Pacific. Your DCR-TRV356E model is a model British camcorder.

  However, to answer your question,.

  The DCR-TRV356E USB streaming function is not compatible with the operating system Windows Vista and Windows 7. You can connect the camcorder to the computer using the A / V cable connection or using an i.Link cable.

  You can visit the European Forums of suggestions regarding the transfer of videos to Windows Vista or Windows 7 computer.

  http://www.Sony.co.UK/discussions/community/en/support/cameras_and_camcorders

  If my post answered your question, please mark it as an "accepted Solution".

  Thank you for your message.

• EA3500 unable to connect USB printer

  I'm unable to connect to a printer using the USB port on my new Linksys EA3500 router.

  I followed the instructions here: Support Page , but my version of Cisco Connect not not the option "connect a USB printer»

  I'm on a macbook pro OSX 10.7.4 and my version of Cisco Connect is 1.4 (12005.2). Version of the firmware on my router is 1.0.30.126544. A screenshot of what I see after having clicked on "Add a device" in Cisco Connect is below. The printer is a HP DeskJet F4280.

  

  Please notify.

  Thank you.

  I began to question my purchase of this router, as it was rather costly unitl a mod contacted me and asked me to try to update my firmware again. This time, there was an update available installed tonight firmware Cisco Connect Cloud (version 1.1.38.138143) that I was able to connect my USB printer. I know that this sounds like a commercial of Cisco, but the Cloud Connect software and interface is amazing! It's a management tool complete recommended router on the web making it pretty useless old Cisco Connect.  Cisco thank you, I am happy that I now have a refreshed and awesome router! (which printed on my printer usb too)

• Unable to connect my Officejet Pro 8600 to the network because of administrator settings

  Hello

  I recently bought an opportunity of Officejet Pro 8600 and I am unable to set it to my home network.  When I put in place-> network-> Wireless Setup Assistant (and all options in the network menu and many others) I get a message that says: "this feature has been locked by your system administrator or the person who set up the printer."

  Help, please.  How to get around this problem and unlock all the menu items that are locked?

  A milion, thank you

  D

  Hello derekd01,

  Welcome to the HP Forums!

  I understand that you are unable to connect wireless Officejet 8600 because you receive a message "this feature has been locked by your system administrator. I will do my best to help you!

  There is an administrator through the Embedded Web Sever settings, but in order to access it, it must be connected to a wireless network. Unfortunately, you are unable to access the wireless configuration. There are two options you can try:

  (1) you can connect an Ethernet cord, and then go to the Embedded Web Sever.

  (2) you can install the printer on your computer by a USB cable. Complete installation, and then follow this HP document convert a connected USB printer wireless. Once this operation is complete, you can access the Embedded Web Sever.

  Once you get this printer, follow these steps in the Embedded Web Sever:

  (1) at the very top of the page, click on settings, then password settings
  (2) if there is a username and password, please remove this item and click on apply

  Please post your results, I will be looking forward to hear from your part have a good night!

• 2013 Outlook, unable to connect to gmail via IMAP, get the error "Ox800CCC0E."

  I get the following error message:

  Task ' Synchronizing subscribed folders for * address email is removed from the privacy *. ' reported an error (Ox800CCC0E): Outlook cannot synchronize folders subscribed to * address email is removed from the privacy *. Error: Unable to connect to the server. If you continue to receive this message, contact your server administrator or the ISP (ISP).

  Could someone please help. There is no problem with internet connectivity.

  I use a network proxy that comes with the I am studying at University. For Skype and other applications of no browser, there is a possibility to enter passwords for proxy University separately connection options. However I do not understand where to enter this detail to get prospects. Or the problem may come from somewhere else. Any idea?

  If you do not understand where to enter retail, you must ask the people of the University.

• Unable to connect to my laptop computer error "the user profile service has no logon. User profile cannot be loaded. "

  Original title: unable to connect to my laptop

  I tried to connect my laptop this morning and received this message "the user profile service has no logon. User profile cannot be loaded. Currently, I run in safe mode to get here. My os is windows 8, I have no restore point for system restore was released. I changed the password but when not even a joy also came not preinstalled os so no disc to any kind either. I'm no computer whizz but I don't have a little and follow instructions if any of you guys have any suggestions

  http://www.eightforums.com/user-accounts-family-safety/6084-any-fixes-user-profile-can-t-loaded-Windows-8-a.html

  The manufacturer of the system should give you a method to restore the system to factory settings as well.  Maybe the press of a button to start, or you were supposed to make the media or something similar.  Call NOW and ask if you can get a CD/DVD restore media.  Get, even if it costs a bit.  Better to get it so that you don't need that when you do.

  Windows 8/8.1 also restore, refresh and restore capabilities.  It's good for some things, but methods of restoration/recovery of the manufacturer are the best long term for several reasons.

• VP1 is unable to connect to Data Mover not at the Application Designer

  Hello
  On 8; 42; 15 tools on a win 2003 server, DB oracle 9i:
  SYSADM can connect via Data Mover, but VP1 can not:
  Invalid user ID and password for the access code.
  
  I don't know password. I've updated with encryption = 0 and password and as sysadm run:
  
  encrypt_password *;
  
  in Data Mover.
  Also:
  SQL > select acctlock from the sysadm.psoprdefn where oprid = 'VP1 ";
  
  ACCTLOCK
  ----------
  0
  
  What else to check.
  
  For the moment unable to connect via the application designer. With the same error message.
  Thanks for the help.

  Have you set the connectid and the connectid Word both in configuration manager (pscfg.exe)?
  Are you able to connect to the database with the people of the user? And be connected with people, able to interview PSSTATUS, PSACCESSPRFL, and PSOPRDEFN (prefixed by the name of the owner of the tables)?
  PS user exist? Is there a table PSDBOWNER containing the name of the database?

  Nicolas.

• Pavilion 14-ab051tx N4G24PA: unable to connect to any wireless network after the upgrade to Windows 10

  I recently bought a 14-ab-51tx Pavilion N4G24PA, this is my first laptop from HP, it comes with Windows already installed 8.1 and it worked fine.

  The thing is, I kind of get used to using Windows 10 on my previous laptop, so without further hesitation I upgraded to 64-bit Windows 10.

  Here's what I did wrong:

  Instead of update Windows 8.1 for Windows 10, I indeliberately he installed fresh, with couple of mouse clicks, I didn't realize that I also remove the recovery partition.

  I realized only after the installation process is complete, but then it was too late. I look forward to using my laptop with Windows 10 freshly installed inside to make some games just noticed that I couldn't connect to any network without wire, House or public. It recognizes my wifi at home, but the signal bar is bizarre, there is only 1 bar of signal even if the wireless router is only about 10 feet from him, so I checked my other computers and smartphones, but the signal on them is ridiculously high (full bar), it also detects another wireless network that are further away than my wireless router.

  But back to my HP laptop, I tried to connect to my home network despite the signal bar with the right entry security key, but it does not connect, it says "Cannot connect to the network".

  Tried updating drivers with HP Support Assistant and no luck, the problem persists, tried all the solution on the internet, int ip reset, reset winsock, checking and unchecking, always without success.

  Can someone help me please...

  Hello:

  The BOM indicates that your laptop comes with a Broadcom wireless card.

  Have you tried the last W10 driver for this card to support your PC and driver page?

  This package contains the Broadcom Wireless LAN drivers for the laptop models running a supported operating system. Broadcom wireless LAN drivers are required to activate the built-in Broadcom wireless LAN adapter.

  Exit the: December 17, 2015

  Version 7.35.317.0 Rev.A

  File name: sp74241.exe

• Unable to connect a Windows Vista system to the wireless network.

  Hi my friend has vista on her laptop

  Hi my friend has vista on her computer hp laptop and try to connect to wireless, the router is the work that we already have a toshiba windows 7 and a computer hooked apple laptop but cannot get his hook up which can make? On a side note, the only way I could hang up was to disable the security on my router, but it's only one thing soberly.

  Hi my friend has vista on her computer hp laptop and try to connect to wireless, the router is the work that we already have a toshiba windows 7 and a computer hooked apple laptop but cannot get his hook up which can make? On a side note, the only way I could hang up was to disable the security on my router, but it's only one thing soberly.

  The methods and capabilities to connect wireless depend more material especially involved and software/drivers for the said material.  I could suggest your friend update that make drivers for hardware devices for their particular & model of wireless device and see if that helps to connect to your network.

• Unable to connect to Homegroup Windows 7 between the Modem to the PC and the Modem to the router for PC users.

  I want to talk about WIRED computers, do not speak of wireless.

  I have 3 PC:

  -2 are connected via Modem directly to the PC.

  -1 is connected through router, and the router is connected to the modem.

  The problem, this is it, it cannot detect the homegroup that I created on the computer that is directly connected by modem.

  The 2 PC via modem are perfectly detected and connected to the homegroup, so I want to know what I would do to another PC (which is connected to the router via modem) detects the homegroup, I had already created?

  Help, please.

  A Modem can have only two ports, connect to the internet (Wide Area Network) and the second to a SINGLE local device. In most cases the internet Service Pwill provide with only an IP address so itself cannot connect to more than one at a time. In current solutions, it is very rare for a Modem to use. If as you say, you have several devices connected to this unit then he himself is a router but possibly with the Modem built in if you have ADSL ISP.

  If your second unit is also a router then that explains why you cannot connect all devices in the same residential group.

  Router 1 has created a Local Area Network including both PC and the WAN port on the Router 2. Router 2 has created another independent local network with the 3rd PC. It is very likely that the two local networks will be IPv4 and traffic can be routed between them correctly in both directions according to the two local networks subnet ranges.

  Even if they are properly configured to allow traffic that HomeGroup requires IPv6 that some home routers support fully and every Member of the residential group must be on the same LAN anyway, he will not support a routed connection.

  Remove the 3rd PC of the 2nd router and plug it into the direct 1 router, remove the router 2nd the 1st in order to free the port. 3 all PCs are now on the same local network and communicate both IPv4 and IPv6, and homegroup should work.

  If you need additional ports provided by the 2nd router for other devices is not part of this problem then consider replacing it with a switch. If you use Router 2 for other devices Wi - Fi irrelevant then you need a wireless access Point.

• Unable to connect Sony DSC-W650 camera to the computer

  original title: Sony DSC-W650 camera woes

  Anyone had problems connecting camera Sony DSC-W650 to pc via the USB with Windows 7 OS?  Very frustrating.  Beautiful pictures, just can't get off the bloody camera em.  Chat with rep online, no help to Sony since.  Downloaded software (since the plug & play does not work) without help.  Tried multiple USB ports with the same results.  Device Manager indicates I need to troubleshoot the device (appears on device like DSC-W650 Manager so it must be to see something), but zero.  Currently re-download software (PlayMemories) but I'm not going to hold my breath.  Help!

  Hello

  Thanks for posting the query on Microsoft Community and we are pleased to help you.

  The description of this request, it seems that you are having problems connecting camera Sony DSC-W650, prosecute the USB ports on the computer.

  I would like to gather more information on this problem:

  (1) that you get any notification on the screen after connecting the camera to the computer?
  (2) do you receive an error message after you connect the device camera to the computer?
  (3) don't you make changes to the computer before this problem?

  Perhaps, the hardware and devices troubleshooter can only solve the problem.

  You can track upward with the following methods:

  Method 1:

  Please see the link to open and run the hardware and peripheral troubleshooting tool on the computer:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  If the troubleshooter doesn't help, maybe, update the drivers for the USB can solve this problem.

  You can follow the link to update the drivers for hardware that does not work correctly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Please let us know if the problem still persists.

• Unable to connect to a network, even with the right password

  I just moved and I don't have Internet yet. I asked my neighbor for their password, but my computer could not connect to this wifi even the password was correct. Can someone help me please?

  Hello

  You must know the exact name of their network (SSID) and the correct password (caps

  "and all that). And they could have their router configuration so that external connections can be made
  unless the information in the router will change.

  Web & networks
  http://Windows.Microsoft.com/en-us/Windows/Web-networks-help#V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1&Web-networking-help=Windows-8

  Why can't connect me to a network
  http://Windows.Microsoft.com/en-us/Windows/cant-connect-to-network#1TC=Windows-8

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Unable to see the computers in the workgroup or server to print to my HP laptop, but I can all ping and access the internet through the router.

  I have a laptop HP with XP pro. I have a network with 2 computers laptops (Dell and HP), 1 office and 1 DP300U DLINK print server with a static IP address. I use a LINKSYS WRT110 router. Everything is connected through this router. I can ping ALL laptops, the office and the print server. I can access internet from all laptops and office. All THE MACHINES are in the same workgroup. Only from my DESKTOP (XP HOME), I can click on FAVORITES NETWORK, click VIEW group of WORK COMPUTERS and I can see the other compters and the print server. However, since my computer Dell laptop or HP LAPTOP (XP PRO) I can PING the router and the journal in it, all the other machines and print server but can NOT SEE THE OTHER COMPUTERS or ACCESS THE PORTABLE HP computer or the other laptop. I turned off all firewalls and firewall McAfee (PORTABLE HP computer) and still no joy. I think that there is a box ticked somewhere or the one that is checked and who should not, but I can't find out where it is or something else to look at. Any ideas would be appreciated.

  I suggest you take a look at:

  http://support.Microsoft.com/kb/318030/

  You can run fixit in the PC that encourage the problem this fixit automatically.