Problem the firmware upgrade failed WRT54G v8.2

Similar Questions

• WRT56G Firmware upgrade fails

  With losing connectivity problems so decided to update v1.00.7 firmware to the latest version available.

  Download the upgrade file and log into the web-based administrator.  Select file, and then click the UPGRADE button.  A few clicks on the timeline, then: UPGRADE FAILED

  What is happening with this?

  I am a fool! I downloaded the firmware file is for the version of the wrong material.  After you download the right pair (Version 6), the upgrade went like a charm...

• Sony headphones Smart MW1 Pro - the device does not display mp3 information to do the firmware upgrade 0.1.D.0.6

  I bought the Smart Sony headphones Pro because the Sony site where there is an official document indicates that it is 100% compatible with my Samsung Galaxy Nexus.

  Everything was fine, until the unit was asked to update to version 0.1.D.0.6.

  After the pair with the headset Smart Display tells me "No Info" instead of the album and the name of the mp3 information.

  According to the forums, I'm not the only one with the problem and also cannot go back to previous firmware was 0.1.C.0.3.

  My Samsung Galaxy Nexus had the OS: android 4.2.1 when I run right.

  Today the android Smartphone I upgraded to 4.2.2 and maybe thought now and nothing will fix the problem, the problem is definitely the gadget.

  We need an urgent solution to this problem.

  This problem has been resolved by the 0.1.E.1.4 firmware which was released yesterday, also improves the screen, enlarge the icons and the clock digits, also solves problems with the mating with the Vita!

  Thanks Sony Mobile!

• path of the firmware upgrade

  Hi, I need go to the latest version 6.0.2.

  What is the best path to take

  TIA

  Hello

  FYI: The upgrade path is in the instructions to upgrade the firmware with the firmware version, to which you want to upgrade.

  6.0.2-> 7.1.11->-> 9.0 8.1.4.   Not all type of controller supports 8.x or 9.x.  What model table do you currently have?

  You will need to restart after each upgrade before loading the next version.

  If you are running VMware ESX/ESXi, you'll want to take a failure at least the first upgrade.  There is a problem with FW< 6.0.6-h2="" that="" can="" result="" is="" vmfs="" datastore="" corruption.=""  it's="" rare="" but="" shutting="" down="" prior="" to="" the="" upgrade="" would="" 100%="" prevent="">

  Saw how the measures it will take, make a maintenance window is a good idea.

  Kind regards

  Don

• After restart of the firmware upgrade

  Hi, I need to update the firmware on my controllers PS6100 EqualLogic.

  I found the instructions on how to do it and everything seems straight forward to do so via the GUI.

  I noticed there is a necessary restart after the firmware has been applied. Does this mean I have to gracefully shutdown the virtual machines running on my SAN LUNS? My iSCSI connections will be closed/broken during the restart of the post firmware upgrade?

  Thank you, Oliver.

  Hello Oliver,.

  In the same area download notes firmware and release is another PDF, entitled ' iSCSI initiator and optimize your SAN environment for high availability operating system considerations ", which includes some key parameters that will allow your computers virtual and servers through the failover time.  It is important that not only the Firmware update, but in the case of an unexpected failure due to a failure of CM.

  More if you use VMware ESXi, there is a best practices PDF for that as well.  In addition to better manage the failover, these changes have shown to improve performance as well.

  The Tech report TR1091 is available here:

  http://en.community.Dell.com/TechCenter/Extras/m/white_papers/20434601/download

  Changes for Windows and the knots of ESXi virtual machines will require a reboot to take effect.

  What version of firmware you are at, and what version you are migrating towards?

  Other things I always propose updates is to ensure that both controllers are plugged in your switch and in the VLAN correct.  Since assets CM are failed over to the passive, support gets much advertising is unable to access the storage after firmware update.  Or ports of the day before were not in the VLAN correct, or individuals with disabilities, etc...

  It is for these reasons that personally I prefer to do the updates via the serial port CLI.   The process is more talkative, and if something should go wrong, you need the serial port of some sort.   Since the installation and tested in advance is a huge time saver.   Here, we use serial mux so that all array controllers are easily accessible.

  Kind regards

  Don

• UCS C460 M2 - error 1902 during the firmware upgrade

  Hello!

  A few days ago, I could upgrade the firmware 1.5 (7 c) to 1.5(8a) and the BIOS to version 1.5.4a to 1.5.4b using file ucs-c460-huu - 1.5.8 has mapped via KVM using an old windows xp with java 1.7. In fact, this upgrade would allow access of latest java KVM, something that was lost a few months ago.

  On Monday, I did the same procedure on an exact server and everything was fine, but this server cannot update firmware.

  I get error 1902, described here:

  https://Quickview.cloudapps.Cisco.com/QuickView/bug/CSCui18044

  But there is not something to solve this problem.

  Any ideas please?

  Concerning

  David

  David,

  A few steps to try:

  -Turn off the server, remove the power supply and press and hold power for 30 seconds. Retry the upgrade.

  -Restart the MMIC before the upgrade.

  -Try the upgrade using a physical USB vs vMedia

  Let me know what questions you have and please share the results.

  Thank you

  Wes

• Tecra A10 - 1GW (PTSB1E) - update of the firmware & chipset failed

  Hello!

  in fact, I have two problems on my laptop (32-bit) windows 7:

  Burning programs do not find my burner (called 'MAT * a DVD-RAM UJ880AS' Device Manager) and even the [update of the firmware | http://de.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=DE&selCategory = 2 & selFamily = 5 & selSeries = 155 & selProduct = 809 & langua ge = 17 & selOS = 29 & selType = 50 & yearupload = & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = 12 & 1 7 = selectedLanguage & type = 50 & page = 1 & FROM = windows7 & ID = 68407 & DISO =-1 & driverLanguage = 42] cannot [find him | http://img705.imageshack.us/f/fehler2.png/]. Although the official web page of toshiba called mast * su * a, i belive it is the correct driver.

  Internal burning function Windows works _sometimes_ and disc playback as usual.

  Chipset driver updat doesn't work.
  The [error message: http://img827.imageshack.us/f/fehler1.png/] said 'requirements for the installation of this software is not met. the installation program is abandoned.
  I don't know, I chose the right driver.

  All attempts have been made under administrator rights and disabled antivirus.

  Thanks for help
  Tablerocker

  p.s.: the windows shortcut (just the shortcut!) + e works, too ([unknown error | http://img137.imageshack.us/f/fehler3.png/]). but I don't think it's a problem toshiba ;-)

  > Burning-programs do not find my burner (Device Manager named him "MAT * a DVD-RAM UJ880AS") and even the firmware does not find it. Although the official web page of toshiba called mast * su * a, i belive it is the correct driver.

  What is the status of the STRANGE in Device Manager?
  Are there any yellow exclamation marks?

  I recommend you remove/clear the STRANGE since the Device Manager.
  Then start the registry and delete the upper and lower registry key filters:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  After that, restart the device. Windows should recognize the STRANGE again.

  Regarding the driver chipset;
  The A10 - 1GW supports the Chipset mobile Intel GM45 Express.
  http://www.Intel.com/products/Notebook/chipsets/GM45/GM45-overview.htm

  If you use the driver from the Intel page, then you should try installing the chipset in Device Manager. This allows to force Windows choose the driver Intel

• How much time it take the firmware upgrade procedure?

  Hello

  I ReadyNas 204 and I'm away from the SIN it free and I wanted to install the 6.5.0 version of the firmware via the admin interface... I'm not sure how much time should I take, it is already underway for 40 minutes... is this normal?

  Sorry for the dummy question!

  Thank you

  Problem is solved. Sent someone back home to check and it seemed that the NAS could not obtain an IP address after you restart. Disconnect the RJ-45 and connected back solved the problem. NAS is back online, but would it be a bug in 6.5.0 or is it just with my camera? Nothing in the newspapers that I could see... just could not obtain an IP address...

  the NAS drive is configured with a static IPv4 address and IPv6 is disabled. If that helps.

• The CPU upgrade failed!

  I bought a workstation Z1 base model with the Intel CPU 2120. Remember to update, I later also bought a 3220 Intel processor, which has almost the same features and same chipset.

  When I installed the CPU and tried to boot my machine, I received the following:

  (1) light remained stable

  (2) no red LED shone, blinked or even doing a dance

  (3) five short beeps were issued, about one per second

  I watched the "HP Z1 maintenance" and Service of Guide (685888-002, LP), but this condition was not covered in the "Codes and diagnosis errors" section on p. 83

  Now, you also have a problem with conflicting information. The "HP Z1 Workstation data sheet" (http://h10010.www1.hp.com/wwpc/pscmisc/vac/us/product_pdfs/Z1_Datasheet.pdf), the list of 'Available processors' clearly indicates the i3-3220 under "processors available.  In fact, it's the datasheet, I used when you decide to upgrade my CPU.

  After the failure of the CPU upgrade, I did more research and found other data sheet (Document

  4AA3-9435EEE

  ( http://h20195.www2.hp.com/v2/GetDocument.aspx?docname=4AA3-9435EEE&doctype=data%20sheet&doclang=EN_G...) which is NOT State of the i3-3220 as a compatible CPU and, in fact, only listed two other Xeon processors as compatible.

  After replacing the CPU, my system is now back to normal, but the question (and my pocket) are bugging me. What has gone wrong? Did I waste my money on a HP data sheet?

  Yours sincerely,

  K!

  Flushed with success from the BIOS update, I tried to install the i3-3220 CPU again. I also upgraded my RAM 8 GB with no ECC Kingston HyperX sticks I had to hang out. Why not live dangerously, huh?

  Worked! The default display to 800 x 600 at initial startup. I went to the driver manager, said Windoze to update the driver, he said he was already up to date thank you much and demanded that I reload. When I rebooted, everything came pink!

  Problem solved!

  For Linux users who might come here, you will need to update your BIOS for a Linux compatible one. The list of available updates are here for on the RPM-based distributions:

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5230510&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswItem%253Dwk_123577_1&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  It is a CLI utility, in that you can run, as I have said before, a distribution based on RPM or you can use a USB key as normal if you do install this size. If you're stuck with Windoze, the updates to the BIOS page is here:

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5230510&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswItem%253Dwk_123048_1&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Read the Installation Instructions and do not hesitate to use HPQFlash. It works a treat.

  THANKS to Dave and Skylarking. After that I have this post, I'll mark it resolved and suggest that my husband buy me a Xeon processor + upgrade RAM for my birthday! Who knows, maybe I'll even take 32 GB!

  Smooches to you all,.

  KAZ

• ASM to the network upgrade fails - PRVF-4190: audit of the armed forces has no

  Hello
  RHEL 4 64-bit
  2 node RAC 11.1.0.6
  
  Hello
  
  I'm moving from a two-node rac, to 11 GR 2. But I get errors when I run cluvy:
  
  *./runcluvfy.sh stage pre - crsinst - n avgrac01, avgrac02-verbose *.
  
  Verify node connectivity...
  
  Checking the configuration of the hosts file...
  Name of State comment node
  ------------  ------------------------  ------------------------
  avgrac02 has no invalid input
  avgrac01 has no invalid input
  
  ERROR:
  PRVF-4190: check of the hosts config file failed
  
  Everything past ELLs
  
  What can be?

  Please refer to the below doc MOS for the solution.

  PRVF-4190: the Hosts Config file check failed (Doc ID 1056025.1)

• The SPA3102 firmware upgrade error

  Hello

  Although I used my SPA3102 for a few years, she has recently become problematic. I sometimes hear audible clicking from the device that is associated with a red light flashes briefly on the power LED. If I'm on the phone at the time, the call is completed.

  I hope that a firmware update will address the issue, but I have been unable to upgrade 3.3.6 (GW). If I'm on a Mac, I don't understand the method of upgrading firmware using http or tftp. Fortunately, I ran Windows XP under Parallels Desktop for Mac and have been able to run the upg-spa3102-5-1-10-GW.exe program. However, a message is displayed: error in upgrading the firmware of the SPA > upgrade failed: no response from the SPA.

  Reading various forum posts on similar such problems, I was not able to find the solution.

  I have disabled the firewall on my Mac, the router (D-Link DSL 504 T) ADSL and Windows XP.

  I confirmed that the IP address of the SPA is 10.1.1.3

  I made sure that the firmware update is enabled in the Provisioning of the SPA configuration.

  I would be very happy to help you please.

  Thank you

  Bart

  These products are treated by the Cisco Small Business support community. (URL: https://www.myciscocommunity.com/community/smallbizsupport)

• WRT54G v1.0 Firmware upgrade

  I'm trying to update the firmware for a WRT54G v1.0 (I think, it doesn't have a version # on the sticker).  I downloaded the firmware (through a google cache to the linksys support page cuz link is down).  I have unziped the file. I did a hard reset (60.60.60).  Then I connected to my router (admin pass so I don't know the reset worked) went to "system > Firmware update > Upgrade" opened the dialog box.  Then I bowsed to the .bin file found he opened it and clicked on 'Upgrade'... nothing has happened... waited... still nothing, no progress bar, nothing, nada, neah... whats up?

  I can still access the router as usual and ect is just the dialog box upgrade that seems broken.

  So, any ideas?

  PcCowboy (Caleb)

  (Mod Note: edited post for the respect of the directive.) (Thank you!)

  

  Well since no one seems to know the cause of my problem, I guess that ill just go to the site www.dd-wrt.com, they prob help and they clam to get the best results in their firmware.

  Ta - your.

  PcCowboy

• "End of the upgrade of the firmware" required on E1000?

  I recently bought an E1000 router and had to put in place manually (with the help of technical support) b/c the Connect software wasn't working properly with my computer.  Today I called the technical support to ask about upgrading the firmware - for security reasons - I'm not having problems.  They walked me well to download the new firmware updated, navigation on the desktop and install it.  (I have nothing decompress).  I told them I thought I had to do a hard reset 30 seconds or something and reconfigure and I was told this is not necessary.  The site says that all the 4 steps should be performed in order to update the firmware correctly.

  If my browser seems to work correctly afterwards, and the listed version is the new version, should I do the hard reset and reconfiguration?  If I did not, is the firmware upgrade completed?  During the process, we me no what this is pointing upwards, is back.  However, after initially installing the router, I made a backup on mine, just in case.  Not sure it would do any good, however, as he himself has automatically saved as file Outlook for some reason any.

  Thanks for any help!

  If the updated version is indicated on the page of the router and all the devices in the network works fine, then there is no need to reset the router.

• The Linksys BEFSR41 V2 Firmware upgrade help

  I can't open the MacBinary (.bin) files that I downloaded from linksys, in order to update my firmware. I used my utility to archive, Stuffit Expander Mac and BetterZip, and so far none of them opens the file. Anyone have the firmware upgrade in a different format or advice on how to solve my problem.

  Do not touch the file you downloaded. The only software that uses it is your browser.

  You must open the web interface of the router at http://192.168.1.1/ and then use the upgrade of the firmware here.

  I don't know if the demo user interface is always up to date, but if it is as you should find it on the help page. See here. Click Update Firmware. Then, press the Browse button and select the .bin file that you downloaded. Then press upgrade and the browser will download the file on the router.

• How update the Firmware on my router?

  I downloaded the firmware file of my router (WRT54GS V7) Linksis wireless because I have problems with the router itself reset while I play, but I can't understand how to install it.  The default program that wants to open the firmware file is VLC (a media player).  What should I do?

  Edit: I'm trying to re - download the file firmware to see if that helps, but now the download links aren't working yet... What is happening here?

  Edit 2: I also try to read the FAQ because it seems that they already have an answer to my question, but the answer page is not loading either.

  The site is under maintenance or something?

  The linksys Web site works fine now. If you still have problems, you must connect the computer directly to the modem for download.

  You should not open the firmware file that upload you to the server. Do not open it with any application. Do not change under any circumstances. All you have to do is to download the file and upload it to the router through the web interface. Download the firmware on the linksys site. Save it to your desktop.

  Then, open a browser and go to http://192.168.1.1/ which is the web interface of the router. The default password is "admin". Search for the function of the firmware upgrade. It's usually somewhere on the Administration tab. On the firmware upgrade page that you see a browse button to select the file to load on the router. Select the downloaded firmware file. Press the upgrade button.

  Do not interrupt the download. It is recommended to disable any firewall or anti-virus while accessing the web interface for the firmware update. The process should not be interrupted. Otherwise you can find yourself with a router of bricks.