EA4500 - MBP problem 802.11n / 802. 11A

Similar Questions

• RALink RT3592 802.11a/b/g/n: Ralink RT3592 802.11a/b/g/n to 5 GHz WIFI connection problems

  I have a HP Probook s 4530 with a Ralink RT3592 2 x 2 adapter WiFi 802.11a/b/g/n and I try to connect to my wifi of 5G, but my laptop do not. He can see that the 2G version. My research on the web, I understand that it can use 5G, and my router broadcasts 5G because my phone use, so I can't work on what Miss me. Can anyone help?

  Best, Minoli

  

  Hello:

  The only suggestion I can offer is to try the latest driver directly from Mediatek (Ralink).

  PCI / mPCI / CB (RT2860/RT2760/RT2790/RT309X/RT35X2/RT539X/RT3290/MT7630)

  30/06/2015

  Win7 32/64 Win8 32/64 Win8.1 32/64

  Win7:5.0.55.0 Win8:5.0.55.0 Win8.1:5.0.55.0

  I had the same problem with the USB dual band Ralink wireless adapter.

  He showed only the 2.4 GHz band, and I knew it was a dual-band card.

  My first conclusion is that the adapter was defective and only 2.4 GHz radio worked.

  I searched on the internet about the adapter model and found that someone suggested to install the latest driver for Ralink for it that has indeed brought the 5.0 Ghz band to life.

  Don't say this is absolutely going to work for you, but you have nothing to lose by giving it a try.

• Hello! My AirPort Express (802.11a/b/g) lights no more. I think he lost his power. What should I do to restore its power?

  Hello! My AirPort Express (802.11a/b/g) lights no more. I think he lost his power. What should I do to restore its power?

  If AirPort Express light does not illuminate, this indicates that the internal power supply inside the Express did not, and the device will need to be replaced.

  If you really a 802.11a/b/g in the Express version, it is at least 8 years old and probably much older than that.  Average life of this product was about 3-4 years, then you have had surprisingly good luck with your product.

• Support for EAP-FAST on Ironet 802.11A/B/G adapter

  Cisco Aironet 802.11A/B/G Wireless Cardbus Adapter such as the lack of AIR-CB21AG-E-K9 supports EAP-FAST. This support happens?

  Hello

  EAP-FAST of WPA and 802. 1 x EAP-FAST is already working before the release of ADU v2.1.0.2

• The dv6429ea specification supports the "HP Atheros AR9280 802.11a/b/g/n WLAN mini PCI card"?

  The dv6429ea specification supports the "HP Atheros AR9280 802.11a/b/g/n WLAN mini PCI card"?

  I mean, I want to change the map type Wireless 'G' for a type "N".

  You have any advice?

  Thank you very much.

  Hello:

  Here is the link to the service manual for your laptop.

  http://h10032.www1.HP.com/CTG/manual/c01035677.PDF

  Chapter 3 lists all cards supported wireless. I see no support for wireless since any N cards.

  I don't see the BIOS updates that add support for any model of card N Wireless either.

  Installation a unsupported card will cause the laptop does not cranking up what the card does not support is removed.

  Paul

• 802.11A/n/AC vs b/g/n

  Hello

  I want to use the fast wireless channel (who can see only some computers) only for the desktop with wireless adapters and more slow single band n for printers and mobile devices etc. However, every time I activate the slower 802.11b/g/n network, all devices that connect to the slower network and no device connects to the network fast 300 Mbps. I use the newer cards (laptops or adapters Linksys or ASUS 450 Mbps PCI-e adapters), so there shouldn't be any problem concerning those.

  Is it possible that I can assure you that computers with maps to the right only connect to the network fast dual-band 802.11n?

  Thank you!

  Tibet

  PS: The Distance is not a problem, there is an access point literally almost all computers!

  Hi Tibet,

   I could not find the wireless card properties to use 5GHz, so if you could find a solution as I wrote above, that would be great.
  
  

  If you use windows OS, you can then configure your wireless NETWORK card to prefer more 2.4 GHz to 5 GHz. Here's how you set it on windows 7 ( Control Panel-> Internet network & -> network-> Wireless Network Connection-> properties connection [right click] -> sets-> Advanced-> band preferably)

  

  HTH

  Rasika

  Pls note all useful resposnes. *

• 802 11A, 1142 AP

  Hey

  If I deploy WIPT on 1142 AP series and using 802. 11A. I will work coz I read in the paper of cisco

  This series 1100 access point doesnot have 802. 11A radio

  Hello

  The 1142 has the Radio-A... where in the 1141 does not work... If the condition is to have a radio-A for WIPT, then it is possible... the fact sheets below link will know us to hv a Radio - A in 1142AP.

  http://www.Cisco.com/en/us/prod/collateral/wireless/ps5678/ps10092/datasheet_c78-502793.html

  Concerning

  Surendra

• Compaq 6715 b - upgrade to 802.11a/b/g/n or/AC

  I understand that I must pay attention to what network adapter I chose for this laptop (Compaq 6715 b, Win7) olde, but I have a nice 802.11ac new router and I would get this box using the pref/AC or less 802.11n.

  The current adapter is reported as PCI\VEN_14E4 & DEV_4312 & SUBSYS_1371103C & REV_02 (Broadcom Wireless 54bg,

  Broadcom wireless 1490 (dell))

  Which, if any, the adapter may seek this gearbox?

  Thanks in advance

  Hello:

  Here is the link to the service manual for your laptop.

  http://h20628.www2.HP.com/km-ext/kmcsdirect/emr_na-c02834030-1.PDF

  The only available for your model Wireless N card is the Broadcom adapter of abgn with the reference number used in the country where you live - 441530-001 or 002-441530.  (Chapter 3, p. 29-30).

  You can install a wireless card for your model (not the 6710 (b) and it must have the part number HP on it or it won't work.

  My recommendation is to do a search by the part number HP on eBay and get an opportunity but tested and functional.

• Update on Atheros AR5009 802.11a/g/n Wifi adapt

  I have a Home Premium HP Windows Vista 32 bit I bought about 7 years ago... only the computer that I have... always works pretty well... well that slow and slow, but only on wifi. So I installed a software to check for driver updates. It shows that the Atheros is old... installed in 26/04/08 available 20/08/11. My guestion is how to get it without having to pay for it. Shouldn't have came to me since I bought it?

  Hello

  Say you the computer; Wireless normally comes with laptops, unless you buy a USB Dongle wireless or Wireless PCI Card for your desktop.

  Get the drivers of the computer/laptop or a hardware manufacturer directly.

  Here is a link to the page of the HP driver.

  Enter your model number and then select the operating system to the appropriate drivers and latest.

  http://WWW8.HP.com/us/en/drivers.html

  See you soon.

• Linksys N900 EA4500 speed problem

  Hi guys,.

  I recently updated my ISP one up to 55 Mbps service (new modem - cisco DPC3008). I did some speed tests and what goes directly from modem pc my reaced 57.27 speed down and 10.72 upward.

  When you browse the EA4500 router I can get 10.50 down and 3.73 upward. I read through a few recent discussions to go to the router configuration and

  -Prioritation media-settings-the downstream bandwidth is fixed at 10945 kbit/s.

  I tried to change to 55000 since I'm now up to 55 Mbps. In addition to the support WMM is defined on IT. I checked to see if the router is in need of an update of the firmware and the unit shows the firmware is uo to date. As soon as I leave the screen and return only the bandwidth is changed to 10945.

  Does anyone have an idea on how to get the router to Max which will result in the modem?

  Thank you. Bruno

  Thanks to FurryNutz. Problem solved

• Migrate SSDS to an another MBP - problem App Store now

  Hello

  Scenario: first MBP 13 "early 2011, second MBP 13" mid-2012.

  I had a little accident with a glass of orange juice and the 2011 MBP just next door. Say no more, it's a classic. I could get at least the SSD unscathed.

  In any case, I got my hands on basically the same model MBP. It is just over a year the most recent. I like to use the 500 GB SSD with El Capitan and bootcamped Win10 of the MBP 2011 as I just swapped it with the HD to MBP 2012.

  So far so good. Double it starts perfectly and everything seems to work except the App store. I checked everything suggested for the "cannot connect to the App store" problem, but none of them worked, terminal settings, Keychain, time hacks etc etc. I guess it has something to do with the fact that the SSD is still material information of MBP, 2011 somewhere and now that it's running on a different model (very slightly) I'm stuck on the App Store. Of course, I am the legal owner of these two Mbps.

  I would be very grateful for any hint how to get around this, even with a terminal hack. I have no time to reinstall. I need the SSD to stay the main system disk where a moment computer migration is no option.

  See you soon

  Learn the following Apple support details. Mac App Store: frequently asked Questions (FAQ) - Apple Support

  Perhaps, it will provide more information.

  Kim

• Would be switching to a simultaneous dual‑band 802.11n AirPort Express correct problems with connectivity MacBook Air Wi - Fi

  Right now I use an old AirPort Express Terminal (802.11 DSSS 1 and 2 Mbps standard, 802 11A, 802.11 g specifications and a 802.11n draft specification) with AirPort Utility Version 6.3.6 (636.5). My MacBook Air (13 inches, beginning 2014) intermittently loses the Wi - Fi connection. Move to a 802.11n simultaneous dual‑band AirPort Express would correct this problem? I'd be better off with an Airport Extreme?

  AirPort Express frequently asked questions (FAQ) - Apple Support

• Satellite Pro A200-16YT - update wireless adapter card for 802.11n

  Satellite Pro A200-16YT (PSAE1E) with Windows XP Professional SP3 from the East.
  I tried to increase my existing 54 Mbps wireless network speed by replacing the Atheros AR5007-EG existing with 802.11n 802.11a/b/g more quick adapter.

  The Atheros driver is v9.2.0.439 (08/04/2011) it's later. I tried to install an Azurewave AR5BXB72 (Atheros AR5008) as a substitute, but without success. As well as trying the standard Windows wireless configuration, I used the Atheros Client Utility (ACU) which confirms that the card and the driver are installed and activated, but the radio does not, so no there is no association/connection to the wireless network!

  Reinstall the original AR5007 works without any problem. If someone experienced similar problems or can offer a solution, it would be greatly appreciated. Thank you

  Hello

  Not sure about this Wlan card but I read in the forum that some people had similar problems, allowing the new card Wlan.

  Check this thread for example:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=253505

  It seems that the problem is related to the assignment of the WLan card pins.

• Pavilion g6: Solutions for Ralink RT5390R 802.11 bgn wifi adapter problems r 4 Windows7, Windows 8-10?

  The screen message is ""RT5390R 802.11bgn Wi - Fi adapter Ralink has problems of driver or hardware-related " "

  In this forum, the given solution is for Windows 7 and 8. The same link he will solve for Windows 10 or is there another solution?

  Hello:

  There is a W10 driver, you can try for this model of the wlan card.

  5.0.57.0 Rev.A (June 18, 2015)

  Microsoft Windows 10 (64-bit)

  SUPPORTED DEVICES:
  802.11n wireless PCI Express Card LAN Adapter
  MediaTek MT7630E 802.11bgn Wi - Fi adapter
  RALink RT3090 WiFi 802.11b/g/n adapt
  Wi - Fi 802.11b/g/n Ralink RT3290 adapter
  WiFi 802.11a/b/g/n Ralink RT3592 adapter
  RALink WiFi 802.11b/g/n RT5390 adapt
  RALink WiFi 802.11b/g/n RT5390R adapt

  FTP://ftp.HP.com/pub/SoftPaq/sp71501-72000/sp71571.exe

• Lenovo Y50-70 802.11n question

  I recently bought my Y50-70 new and I am very satisfied. I chose the FreeDOS version, as I already had a Windows Pro 8.1 license. I installed all the drivers on the Lenovo support Web page and everything seemed fine. However, I recently discovered that the Wi - Fi network adapter is missing support for wireless n mode. The model is Realtek RTL8723BE, which is clearly part of a WiFi n up to 150Mbps. In the options in the Device Manager, I have only the option b or b/g. I guess it's a driver problem.

  

  All the world is facing this issue before? I do not like, but I use my own NAS for file management, a fast and reliable network connection is very important for me.

  72.2 Mbps is 802.11n 802.11n is without doubt.

  For 150 Mbps, you must force the router to set the width of the channel at 40 MHz.