EA9500: how to configure wireless network Mode?

Similar Questions

• my computer does not have an installed and configured wireless network adapter

  I just installed a new hard drive on my computer of dell inspiron 1525. I am not very computer but I managed to do it and it works. I had a disc from dell to reinstall windows vista edition Home premium 32-bit and had drivers and utilities dvd. However, I can't connect to the internet. He always tells me that I have not installed and configured wireless network card. When I go into computer management, there is no network adapter. There are "other devices" which device base system list three times with properties that say that the drivers for this device are not installed (code 28) but it won't let you not reinstall drivers and to be honest, I don't even know what the "other devices". There is also an ethernet controller that says the same thing. A network controller and the properties say he has not configured corr. (code 1) but won allow you to install because windows cannot find the driver for the device. He says that if you know the FAB of the device, you can visit the site Web-manufacturer of this device? As you can see, I'm not very computer. So, how can I connect to the internet. I have Verizon wireless at home. Thank you.

  well, I think that I thought about it. I right click on each of them separately, and I think I can have it now.

  Thank you

• How to configure the network adapter when you run ESXi on VmWare workstation?

  How to configure the network card installing ESXi on VmWare workstation 6.0.0?

  These are the options: I tried bridged, host-only NAP.  None of them works

  

  What Miss me? driver or adapater?

  I'm running on vmware workstation on Windows 7 with Lenovo laptop.

  in the configuration of your virtual machine, the main issue is memory. you gave the 2 GB of RAM, whereas ESXi 6 cannot go forward without minimum 4 GB of RAM.

  If please have 4 GB of RAM and re-run Setup. you will get through.

  message about the network card should also not appear after that. What kind of network you choose depends on your need.

• How to configure the network device agent

  I added a network device (router) in the new platform, its not to go for all of the alerts in tool Hyperic. How to configure the network device to get information to the Hyperic server. Do we need to do any configuration of SNMP.
  
  Can someone help me please.

  Hi Cyndhya,

  Do you mean you want to see traps SNMP generated by your device network at HQ? To do this, you need to configure one of the agent HQ to receive traps and configure the network device to send the trap to the agent. Once this operation is complete, you should be able to add the device network platform (you must use the agent HQ for the monitoring network device connection).

  Here is the step by step guide:
  http://support.Hyperic.com/display/DOCSHQ30/agent+SNMP+trap+receiver

  Koffi

• How to configure the network wireless with an Equium L40-10 X?

  Could someone please help?

  To configure problems Netgear DG834G wireless router to communicate with my X L40-10. My ISP does not support the Atheros AR5007EG Wireless LAN.

  Thank you.

  Hello

  I can't imagine that it won´t work. Just a few questions:

  -Work with the factory-installed system?
  -Why Don t you use "Utility Configfree" Toshiba?
  -Have you already set on your router and your default machine?
  -Could you please give some information about your system and configuration of routers and computers? Can be useful for those who are not standing next to you, and to have physical access to your machine to check what the problem is. :)

  Maybe you should check these links to see how to connect to a wireless network:

  http://compnetworking.about.com/cs/wirelessproducts/a/howtobuildwlan_4.htm
  http://articles.TechRepublic.com.com/5100-1035_11-1048162.html
  http://www.Microsoft.com/technet/community/columns/cableguy/cg0406.mspx

  Good luck buddy
  See you soon

• How to configure the network home wiFi with dlink router

  I need to create a home network using the dlink WiFi router
  a computer with Vista and the second with XP
  can someone tell me what havo to do to configure the router etc etc o give me same informamation on where I can learn to do
  I want just the old pc with xp for the server and the vista one customer but more importantly I need the file on XP to migrate under vista.
  Thank you very muche for your end of the patient cooperation
  in return, I give free cooking classes
  see you soon

  I'm not sure if you are asking how to set up a secure wireless network, if you ask how to share files between your two computers (and there is no "customer" or "server" in a working group, in a field - which is not), or both.

  So I will give you information on doing both.

  Router - configure manually

  Setting up a router is simple enough. Normally, you run the CD that came with the router and follow the instructions. If you're running Vista, maybe the CD that came with the router does not work; I do not know this. But you can set up the router without the CD. Note that if you have Internet cable for the connection you have just set up the router to DHCP (or there may even be a choice of cable to choose). If you have DSL Internet, you select TRP usually and enter the username and password you selected when you initially set the DSL connection. So:

  1. turn off the power to your cable modem.
  2. attach a class (usually supplied with the router) ethernet cable cat5e port Internet/WAN from the router to the ethernet port on the cable modem.
  3. connect the ethernet cable cat5e from the network card in your computer to one of the ports on the router. If you do not have an ethernet cable (because you were using USB), you will need to go to the store and buy a.
  4. turn on the cable modem. After that all the lights are on, turn on the router.

  To configure the router:

  Have a computer connected to the router with an ethernet cable. Examples given are for a Linksys router. See the manual of your router or the router mftr's Web site. for the parameters by default if you don't have a Linksys. Open a browser such as Internet Explorer or Firefox and in the address bar type:

  http://192.168.1.1 [Enter] (it is default IP address of the router, which varies from router to router then check your manual)

  This will bring you to the login screen of the router. The default username is blank and the Linksys default password is "admin" without the quotes. Enter this information. You are now in the configuration of the router utility. Your configuration utility may be slightly different from mine. The first thing to do is to change the default password because * all * known default passwords for different routers.

  Click the Administration link at the top of the page. Enter your new password. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE. Re-enter the password to confirm it, and then click Save settings at the bottom of the page. The router will reboot and show you the box of connection again. Do not fill in the user name and put it in your new password to enter the configuration utility.

  Now, click on the link wireless at the top of the page. Change the network name (SSID) wireless by default to something, you'll recognize. I suggest that my clients not use their surname as the SSID. For example, you might want to name your network wireless network "CastleAnthrax" or similar. ;-)

  Click on save settings and when you get the prompt that your changes were successful, click the wireless security link which is just beside the Basic Wireless Settings link (where you changed your SSID). Most computers purchased during the last 4 years have the wireless hardware that will support WPA2-Personal (also known as WPA2-PSK). This is the desired encryption level. If your wireless hardware is older, use WPA. Don't use WEP, because who is easily broken within minutes. So go ahead and set the Security Mode WPA2-Personal. Do this and enter a password. For example, you could use the password ' here be dragons, beware you scurvy dogs! The password is what you enter on all computers that are allowed to connect to the wireless network. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE.

  At this point, your router is set up and if the computer that you use to configure the router will normally connect wireless, disconnect the ethernet cable and wireless of the computer should see your new network. Enter the password that you have created (exactly as you wrote it with all capital letters and punctuation) to join the network and start surfing.

  Networking

  Here are the steps of general network troubleshooting. Just cannot apply to your situation, so just take the bits that are. It may seem daunting, but if you follow the steps in the links and suggestions below calmly and consistently, you will have no difficulty to implement your sharing.

  Excellent, comprehensive, but easy to understand article on sharing files/printer under Vista. Contains information about sharing printers and files, and the folders:

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

  For XP, start by running the Network Setup Wizard the on all machines (see warning in section A below).

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, it means which allows file sharing / print on the Exceptions tab normally run the XP Network Setup Wizard will take care of this for these machines. The only "witch hunt", it will turn on the XPSP2 Windows Firewall. If you are not running a third-party firewall or you have an antivirus/security with its own firewall component program, then you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Refer to the safety of any third party program or the user forums for how to correctly configure its firewall. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this:

  XP - configure Windows to login automatically (MVP Ramesh) - http://windowsxp.mvps.org/Autologon.htm

  Vista - Start ORB > Search > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).

  D. Si one or more of the computers is XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).

  E. create share as you wish. XP Home does not share the users directory or the Program Files, but you can share folders inside those directories. A better choice is to simply use the Shared Documents folder. See the first link above for more information on Vista sharing.

  F. you have the job of file sharing (and tested by exchanging a file between machines), if you want to share a printer connected locally to one of your computers, share of this machine. Then go to the printer mftr Web site. and download the latest drivers for the correct system. Install them on the target machines. The printer must be collected during the installation procedure. If this isn't the case, install the drivers and then use the Add Printer Wizard. In some cases, printers must be installed as local printers, but it is outside this response.
  MS - MVP - Elephant Boy computers - don't panic!

• How to reconfigure wireless network extended with several base stations

  I have a wifi network in an Airport Extreme wired to the modem from our Internet service provider and an Airport Express Terminal extended wireless in another part of the House. I recently added a second Airport Extreme (also extended wireless) to boost coverage in another area of the House. I want to have the Express and the extreme second each wireless connection directly to the base station to the modem to have the shortest path to the main base station, but the Airport utility network diagram seems to keep showing the network of linearly (main Extreme base - second extreme - Express). So, two questions: first, represents the schema of utility Airport the signal path real (linear Express by Extreme II, then to Extreme II/modem)?  And secondly, if so, how to reconfigure the network to have both Express and Extreme II forking the extreme base I directly, rather than having the food by Extreme II, then Extreme I Express. The network showed that the desired branched network yesterday, but today went back into the linear trajectory. I tried a simple drag and drop graphic to move the Express, thinking that surely the Apple would implement such a simple, logical and direct way to manage the network, but no. Have not seen another way to configure the network manually, so any suggestions would be appreciated.

  It is very important to understand that Apple "extend a wireless network" works on signal strength.

  In order to have the AirPort Express and AirPort Extreme to extend the network of the 'main' extreme wireless, two conditions must be fulfilled:

  (1) the AirPort Express and AirPort Extreme extension should both be on the same relative distance of the extreme 'main '.

  (2) AirPort Express and AirPort Extreme extension must both be closer to the extreme 'main' they are to each other.

  In other words, a well put together would have your "main" AirPort Extreme in the middle of the House, with a Terminal AirPort Express on one end of the House and the AirPort Extreme to the other end of the House.  In this configuration, the two airports are about the same distance from the extreme 'main'... and... "" oth extending airports are located more close to the "main" airport that they are with each other.

• HP photosmart 5520: how to change wireless network

  We change the network wireless to a new device

  How can I change the HP Photosmart 5520 for the new wireless device?

  How to configure laptop computers to print to the printer on the new wireless network?

  annax wrote:

  I looked through the user's guides, but could not find how to change printer to join another network wireless

  Can you please provide the steps

  I downloaded the manual and found your informtion on page 32 user's guide.

  http://support.HP.com/us-en/product/HP-Photosmart-5520-e-all-in-one-printer-series/5157533/model/5157535/manuals

  It's your support on the edit page and the connection of your printer.

• Vista home premium - use windows to configure wireless networks

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi Lmmaus,

  Have a. you tried to configure the wireless network?
  B. do you receive any errors?

  Please provide details of information you're looking for.

  How to connect to a wireless network in Windows Vista
  http://support.Microsoft.com/kb/928429

  Setting up a wireless network
  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

  Please answer in return.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• How to configure a network printer and network drive in Windows 7?

  * Original title: cohen * address email is removed from the privacy *.

  having trouble mapping.  naming and configuration of a network in windows 7 pro drive. I am connected via a wireless network and also try to use my jet of office of hp as a network printer I need to know how configure that as well

  Hello

  I would like you to check out the links and check if it helps the network configuration and the network printer.

  http://Windows.Microsoft.com/en-CA/Windows/create-shortcut-map-network-drive#1TC=Windows-7

  http://Windows.Microsoft.com/en-CA/Windows/install-printer-home-network#1TC=Windows-7

  http://Windows.Microsoft.com/en-CA/Windows/install-printer#install-printer=Windows-7

  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab3&V3H=winvistatab1&v4h=winxptab1

  Hope this information helps. If you have any questions, please let us know.

• This computer does not have an installed and configured wireless network adapter

  Hello. I'm having serious problems with my computer. It's a Dell 1545 Inspion. After having a problem with my HP printer, I contacted HP and was instructed on how to remove and uninstall the printer from my computer. After that I followed this process my computer has never been the same. For example, all of the icons in the start menu had little pictures of records instead of the icon associated with the program. Anyway, after a lot of problems, I decided that I should restore my computer to factory settings using the CD of the operating system supplied with my computer and the instruction booklet on how to do it. Now, the computer cannot connect to wireless internet. I have wireless so I can not on the internet. I get the error "this computer has no network cnfigured and installed wireless card." When before I restored it the computer with the CD of operaiting, there was no problem of wireless connection. Help, please.

  Manjeet

  The system detects the card wireless at all?

  Hold down the Windows key and press 'R' at the same time. Type "devmgmt.msc" (without the quotes). Check if you can at least see the wireless network card.

  Or key Windows press "R", type "ncpa.cpl" (without the quotes) and see if you can see it there.

  You can also try to go to the Dell website and lifting your system via the number of Service Tag (XXXXXXX) found either on the roof of your system, or by the series at the rear or bottom tag. Here you can try to download the drivers for WLAN card and install from there.

  Just wondering if his work even at this point.

• How to change wireless network that is connected to HP Deskjet 3070

  Hi, I recently changed my home hub have so a new wireless that my printer is NOT connected to.  For this reason my printers wireless flashes. I was wondering how to change the printer to the wireless network.

  Thanks in advance

  Hello

  Please consider this as change in router and try the following instructions:

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

  Kind regards.

• How to secure wireless network with a computer running XP and one running Vista

  When I secure my network wireless on my desktop (XP) I can not connect to internet on my laptop which is running Vista.    I use "WPA Personal" as my security mode on my desktop.

  I've seen variations of this question, but not exact, so I'm still at a loss.

  Hello

  Follow the steps in this link-

  http://forums.Afterdawn.com/thread_view.cfm/678319

  If you have created a network profile, then delete it and create a new you follow these steps.

• This computer has no announcement of uninstalled of configured wireless network adapter.

  I recently installed a new hard drive and had therefore to install a new version of windows vista. So I installed vista, but could not get on the internet. Just the computer will not read the wireless router. I have another computer and obviously it still works. I used it to download an updated driver for the NIC on the computer I just loaded vista on and that has not worked. What can I do?

  Hello

  Maybe this can help
  

  Most laptops have a physical switch for the wireless card. Read the manual of the computer and make sure that the wireless adapter is on.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Above everything is OK and it connects to the wireless router. Log in from any computer which is, or can be connected to the router with a wire wireless, disable wireless security, make sure that the wireless streaming is enabled and try to connect with no. wireless security.

  When the work turns on the Wireless security.

  Note * people sometimes make mistakes in writing and retype the password for security.

  Another way is to copy in the menu of the router and then paste it when asked of the wireless card.

  --------------------------------------------------

  I really checked and configured every thing and it doesn't work.

  Software firewall application that is not configured to allow local traffic (between the computer and the router is also a possible problem.
  some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  
  

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• How to configure a network storage to back up all 4 computers?

  My system is Windows 7 Pro and I have 4 computers windows 7 I would like to save with storage attached to the network using my 1 X without digital 4 Bay eSATA Port multiplier JBOD Tower storage with 4 1 TB disks identical the speaker say (noeSATA card Bundle) TR4M + BNC but I find no software and no instructions how to automatically back up all my computers. How can I do? My computers are an ASUS RT = N66U 802.11a/b/g/n, Iee 802.3/3u/3ab wireless. The router has two usb connections and cable connectors. Can you please tell me how to connect to my lap without digital to automatically back up all my computers via Network Attached Storage. Do I need to get other software? Thank you.

  Hello

  Please go to the Microsoft Community Forums.

  This problem would be better suited to the TechNet community.

  Please visit the link below to find a community that will support what ask you

  http://social.technet.Microsoft.com/forums/en/category/w7itpro

  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.