Installation help for risk.

Similar Questions

• Installation update for creative cloud can never exceed 2%, which means that I cannot have access to Premiere Pro. Can anyone help with this?

  Installation update for creative cloud can never exceed 2%, which means that I cannot have access to Premiere Pro. Can anyone help with this? I need urgent access to Premiere Pro, so I can return videos to my clients.

  Check your (win) Task Manager or activity (mac) for a suspended adobe monitor helps the process that you can complete.

• help for XAV - 60

  Hello, your help to see if they have any master code to unlock my car radio model XAV-60, this step

  Hello Javier,
  Welcome to the community of Sony.

  The 4-digit security code that you are talking about is programmed in your system during the installation.
  For security reasons, please contact our customer relations team at the (239) 768-7547 to speak with a representative of customer service for assistance.

  If my post answered your question, please mark it as an "accepted Solution".

• The installation source for this product is not available, ensure that the source exists and you can access (to remove Microsoft silverlight)

  I need to install Microsoft silverlight to watch films from netflix, but it is impossible to install it; but in my programs, I have microsoft silverlight (old), I think that if I remove the old program, the new microsoft silverlight will be possible to insall it. The problem is when I try to remove the old silverlight (add or remove programs) do not remove and displays this dialog box "the installation source for this product is not available. Verify that the source exists and that you can access. I like you would help me in this matter. Thank you very much. Manuel Ortega.

  Hello

  I recommend you to ask your question in the Microsoft's Silverlight Installation and Setup forum for better support.

• I lost the disc to restore my phone and it is no longer supported by the manufacturer. Can I use the installation disc for my desktop with my laptop serial number?

  I lost my laptop computer restore disc and it is no longer supported by the manufacturer. Can I use the installation disc for my desktop with my laptop serial number?

  My title says it all. I have an old HP laptop that they do not send to restore the disc more (I don't know yet I had one; his old laptop from my brother) and I have an installation disc for my new PC. I have a Windows XP Home edition SP2 installation disc. However, as the hard drive of my laptop broke down, I don't know what version of windows it was. I think it should have been an OEM version and the sticker says it was Windows XP Home Edition.

  Now, anyway I tried to install my installation on laptop computer disc, offering series of laptop computer but now it asks me to activate. Will it work if I activate it?

  Thank you

  Unless you are lucky enough to know someone who has a generic OEM drive, which you can borrow, I don't see a practical solution for you.  I advise you to spend the money to buy one, even if you could find one to buy from a reliable source (not eBay!).  Although a generic OEM disc should work with your product key, there is no guarantee that it will work with your product key.

  If your laptop can be retrieved through a restore partition, and you can't borrow a disc that will work with your product key, then you have pretty much exhausted all reasonable or practical options.

  I finally did! I borrowed a copy of a generic OEM drive, through activation and it is!

  Thank you much for the help...

  Now I've done could you help me more? Say now, I returned the drive OEM back (don't want to make an illegal copy) and want to be able to use my current system installed to generate a system disk that will allow me to avoid all the problems I've had up to now. What would you recommend? I've read a few articles on other forums (I did some research!) but is a little confusing. I hope you could help.

  Thank you

  @Carey Frisch - positive Get... you want to help here not only your view of what I would do with my money!

• I want to install a new hard drive and I don't have the installation discs for Windows, is it possible to get my old copy of Windows as a download?

  Help download windows on old laptop but I have a problem...

  I have an old laptop that I want to install a new drive hard in and I don't have the installation discs for Windows, is it possible to get my old copy of Windows to download so I can fix it this thing? I have my code produces the thumbnail but no physical copy of the Install disks.

  Unfortunately, there is no download of Windows Vista available bits.  Please see: How to replace Microsoft software

• Could not find an installation package for the product TrayApp. Try installation using a valid copy of the installation package for TrayApp.msi.

  Yesterday I uninstall a program, the Zynga toolbar and which has not, I lost a google toolbar. I then tried to perform a restore, and that's when I started getting the TrayApp message. Also, I tried to do a restore on my external hard drive device, and that did not help either. The date on the external hard drive was 18/02/2011.

  The google toolbar is active it is not displayed any longer.

  Hello

  "a valid copy of the installation package for TrayApp.msi.

  This is normally a problem with your HP printing software

  Uninstall and reinstall the printer

  and try this

  http://www.ehow.com/how_5269744_remove-trayappmsi.html

  Contact HP support

  http://welcome.HP.com/country/us/en/contact_us.html

  HP support forums

  http://h30434.www3.HP.com/

  follow these steps

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  also run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• Uninstalling Java problem: "the installation source for this product is not available. Make sure the source exsists and that you can access. »

  Hi, I'm having a little trouble trying to uninstall Java, so I can reinstall it. I get this error message:

  "The installation source for this product is not available. Make sure the source exsists and that you can access. "When I try to find the installation package to uninstall. I'm the only person on my laptop Windows Vista Ultimate, and I am the administrator on the computer. I can't find something when I search for it during the uninstallation. When I go on ' computer > disc Local (c) > Progam Files > Java' I see a whole bunch of files, but I can't find the installation package with the 'Installation .msi package' at the end. I find 'install.rdf '.

  I was wondering if anyone can help find me the source for Java, so I can uninstall and reinstall so my Java work properly.

  Java has been uninstalled before when Elluminate program my brother (online meetings of his school) and I guess when he was relocated something went wrong, but I have 2 Java programs. One by one by Sun Microsystems Inc. and Oracle and I am trying to install are Sun Microsystems Inc..

  Help, please!

  Corky (Corkster)

  Java issues are best handled by people in the Java forum:

  http://Java.com/en/download/help/index_installing.XML?user_os=Vista

  http://Java.com/en/download/help/index.XML For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• I saw help for my question but I need the phone number for the microsoft support, because when my computer did an automatic high grade shut down you my computer and cannot restart windows. I don't have the disk to reinstall windows

  What can I do now, I'm lost

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• My creative cloud has been slain in "the update installation" 5% for days now "

  I have a macbook and the creative cloud installed, and he's been stuck in "The Update Installation" 5% for several days now.

  This is what it looks like, I don't know what to do because he said I can't same Unistall it.

  Help, please.

  Hello

  Please try the following steps to resolve this problem.

  (MAC)

  (1) close adobe all processes in the activity monitor (cloud Creative), synchronization of the base, CC, ccx, services for the desktop application adobe, adobe office, CIB Adobe updater AAM Broker service

  2) navigate to the following locations and assign all permissions to the adobe folders to the current user. To navigate, click on go in the bar on then click goto... type/library/application support of / and then click OK.

  (3) to assign the authorization right click on adobe folder and click on Get info... A window will open. Then click on the lock symbol to allow editing. Then click on sign + to add your user name. Then change read only to read and write. Then click gear icon on the bottom and click on apply to the elements included and click ok... Go to the next step then.

  3) navigate to the location following support/adobe application and rename in oobe to oobe.old and aamupdator.old aamupdator.

  (4) place you ~/Library/application support/adobe/oobe and rename in oobe to oobe.old and aamupdator.old aamupdator.

  Cloud creative library and remove 5 open application).

  (6) open utility library of the application itself and delete Adobe application manager and creative cloud

  (7) install creative cloud from link according to https://creative.adobe.com/products/creative-cloud

  (8) launch cc app and it should work properly

• I'm trying to reinstall Premiere Pro CS4 on Windows 7 Pro to a new setup file downloaded.  Layout Error 1612. The installation source for this product is not available

  I get an error of installation: Error 1612. The installation source for this product is not available. Verify that the source exists and that you can access. What is the solution?

  Hello

  This link might help: How do resolve error messages that occur when updating Adobe Acrobat or Reader for Windows

  Kind regards

  Sheena

• How can I specify the installation directory for the packages installed on Windows clients?

  This article (Creative Cloud help |) Create or modify packages) mentions that you must specify the installation location on the command line in Windows for CC packages:

  
  

  Installation location

  The Application Manager offers you the following options for the deployment location:

  • Deploy to the default directory of the application: The default player is system unit; the default path is \Program Files in Windows/applications under Mac OS.
  • Directory to specify when the deployment: Allows users to end to specify the installation path when the package is deployed. On Mac OS, users are invited on the user interface, while on Windows, it's a command-line only option.
  • Specify directory: enter the path to the location to a specific installation location

  I have chosen "Specify the directory for the deployment" when I built the package.  I also added parameters for deployeur batch of Exceptions (Creative Cloud help |) Using Adobe deployeur Exceptions) indicating the installation location for the exceptions.

  How to access the command line options during install?

  • I tried setup.exe /?, and setup.exe -?, and the installation continues straight on the pilot of c: (small SSD drive; need to install on the 1 TB SATA drive on the HP workstation).
  • I looked for the MSI command line options, and there is not to change the installation location.

  There is a post somewhere that explains it?  I had no luck with my research in the forums on the web.

  When the "Specify the deployment directory" configuration is selected then you may need to use a deployment tool to deploy this package and need to call for the installation .msi.

  I hope that under Microsoft section can help. It has all the command line to install msi.

  http://TechNet.Microsoft.com/en-us/library/cc759262%28WS.10%29.aspx#BKMK_SetLogging

  Thank you

  Ashish

• How can I get replacement lost the installation DVD for?

  I lost my original installation dvd for design standard cs5, how can I replace it?

  You can get the download link for only the most recent version of the software from the Adobe Web site and support Adobe, but there is a site that can help you downlaoding the Roop version.

  http://prodesigntools.com/all-Adobe-CS5-direct-download-links.html

  Read the instructions properly to avoid the error and also write the file downloaded to a Flash DRIVE or a DVD for future use.

• Link on the installation guide for content Portlet Suite 11 g Release

  Hi all
  
  Anyone knows the link to get the installation guide for dissemination of content Portlet Suite 11 g.

  Hello

  I also had this problem initially, but in my case I had missed on the following steps:

  1.

  From a command line, run the WebLogic Scripting Tool (WLST), for example:

  WLS-HOME/as11r1wc/common/bin/wlst.sh

  Note:
  The script of WebLogic (WLST) tool is a script command line that you can use to create, manage, and monitor WebLogic Server domains. See the Oracle Fusion Middleware Oracle WebLogic Scripting Tool for more information.
  2.

  After initializing the script of WebLogic tool, type connect() and press ENTER.
  3.

  You are prompted to enter the user name, password and server URL Admin. Enter the following values and press ENTER.
  4.

  Once connected to the server, run the following command to register your WSDL:

  registerWSRPProducer('webcenter','Provide_Any_Name_for_WSDL_Handle','Your_WSDL>',timeout=500)

  For example:

  registerWSRPProducer (' webcenter', ' StellentWSRP ',' http://Host_Name:Port / SPC/portlets/wsrp1? ") WSDL ", timeout = 500)

  Referencing your content server

  WLST following controls should be used to create, delete and reset an Oracle Content Server connection:

  Note:
  Custom managed server on which CPS is deployed and the WLS_Spaces server must be restarted after you run the following commands to make the changes take effect.

  *

  Run the following command from WLST to create an Oracle Content Server connection:

  createJCRContentServerConnection ('CPS_Application_Name', 'CSConnection', socketType = 'socket', 'Content_Server_Host' = serverHost, serverPort = 'Content_Server_Port')

  For example (if the CPS application name is StellentPortlets):

  createJCRContentServerConnection ('StellentPortlets', 'CSConnection','192.0.2.250 = ', serverPort = ' 4444' serverHost, socketType = 'socket')

  *

  Run the following command from WLST to remove Oracle Content Server connection:

  deleteConnection (appName = 'CPS_Application_Name', name = 'CSConnection')

  *

  Run the following command from WLST to restore an existing Oracle Content Server connection:

  setJCRContentServerConnection ('CPS_Application_Name', 'CSConnection', socketType = 'socket', 'New_Content_Server_Host' = serverHost, serverPort = 'New_Content_Server_Port')

  *

  Run the following command from WLST to list existing Oracle Content Server connections:

  listJCRContentServerConnections (appName = 'CPS_Application_Name')

  See if you've too missed to follow the above mentioned steps and if so then fill to see if the problem still persists.

  Hope this helps

  Thank you
  Srinath

• ODI11G help for install windows XP 32. JKD validy?

  ODI11G help for install windows XP 32.
  Exeter in the installer - Disk1-install-win32 - setup.exe
  
  the same applies
  a JDK - to be informed, a date that is to use JAVA_HOME - but the instaler ODI responded and closed, repeating.
  
  someone made this thing?
  
  Thanks for your suggestions?

  what you can do is go to oracledi/bin/odi.conf and remove the path of the jdk and call again the odi.exe, he will then ask the path of the jdk and just pass the jdk path until the folder.

  Please try again and let us know also if you have any question, please tell us up to what measures you ran installation so far.