EAP-FAST EAP and PEAP authentication configuration

Similar Questions

• ACS5 / ISE: PEAP authentication - first then machine user

  Hi on board,

  I have a simple question about AAA with ISE or ACS5 and PEAP.

  As we all know, is the big drawback with the PEAP Protocol, you cannot apply that property of the company not authenticates on the network.

  Example:

  Computer Windows - authentication domain and user PEAP. During GINA of Windows, the computer account is used - after login, the user account is used.

  If I bring my own iPad to society, I just have to activate WLAN, enter my domain credentials and voila! I am!

  Some companies want to restrict the network only for devices of the company.

  Therefore, is a simple solution for this, EAP - TLS - but we know all that some guys do not want to put in place an infrastructure to full blown public key...

  So here's the question:

  Is is possible to enforce an order of authentication in ISE or ACS.

  If a request for a certain MAC address of the client authentication happens (Calling station ID), this identity must authenticate with a first computer account (the prefix "host\") and that once the machine authentication is successful, the authentication of the user is authorized.

  If someone wants to connect with a user account, then this is not possible, if there was not a sign of the old machine.

  So is this possible with the ACS or ISE?

  Thanks in advance!

  Johannes,

  You can prevent ipads to connect forcing the machine authentication check the authentication of the user policy.

  http://www.Cisco.com/en/us/docs/security/ISE/1.0/user_guide/ise10_authz_polprfls.html#wp1116684

  You can also use the profiling feature in ISE to reject apple devices to access the network.

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• TLS and PEAP on ACS

  Hi all

  I would like to ask a question here. In our production use us EAP - TLS for cable 802. 1 x (with ACS for authentication), but we are about to change for PEAP. Is it possible that these two can coexist together on ACS until we completely remove TLS? Unfortunately, we do not have test environment to test and of course I would avoid all users not being PC not able to authenticate.

  Thank you

  Radim

  Hi Ramdin,

  The GBA, you can enable the TLS and PEAP at the same time. This will make both tls and peap machine to connect successfully.

  I'm taking into account the fact that you do not change your certificate provider.

  Kind regards

  ~ JG

  Note the useful messages.

• AnyConnect user using the user certificate authentication and LDAP authentication

  Hello

  I'm trying to implement the Anyconnect VPN for my office. Now, I want the user to authenticate the user certificate based (which is install user local system are we) CN value and LDAP authentication. A help how to achieve this requirement. We install Certificate ROOT and INTERMEDIATE Godaddy and even already installed ASA. Also, we have the user certificate installed on each system user to authenticate the user.

  Any help please.

  Hi subhasisdutta,

  This link will certainly help you with the configuration:

  http://www.Cisco.com/c/en/us/support/docs/security/AnyConnect-secure-mob...

  Hope this info helps!

  Note If you help!

  -JP-

• In VRA7 Kerberos authentication configuration

  Hello

  I'm trying to configure Kerberos authentication in my environment VRA7. I followed the instructions of the reference documentation. I have install the connector, workers and Kerberos authentication providers... and can connect with my domain user name and password via the password authentication provider.

  However, when you try to login, I get the following error message: access.policy.auth.methods.not.valid.

  Access denied because no valid authentication methods have been found 404

  

  When I try the test URL: https://connector-instance.domain.host/authenticate , I got a HTTP 404 status - / authenticate error message.

  Any ideas?

  Best

  Guido

  Solved: all accounts that are synchronized with the Identity Manager must have a name, surname and email configured.

• CAN bus off fast recovery and recovery slow modes

  Hello

  I know the busoff recovery procedure consists of monitoring the CAN bus up to 128 11 consecutive recessive bit sequences have been observed.

  But I want to know what is the bus fast recovery and slow the recovery.

  Thanks in advance.

  Kind regards

  Sagar Joshi

  Where you see the terms "broad recovery fast bus" and "slow bus off recovery". As far as I know, the spec CAN define only a single bus out of recovery.

• Windows XP restarts all the time; does not start mode safe mode and last known Configuration does not work either

  Hello! Recently, I installed Wubiand appreciates well. However, a few days ago, when I tried to boot XP on my netbook (EEE PC 1005hab), it restarts just constantly return to the selection screen of the BONES. I tried Safe Mode and last good Configuration known with anything will do. What should I do now? Ubuntu has not stopped working suddenly, so I can't access my data.

  I don't have to have a Windows XP CD, there is something weird Asus recovery instead. In addition, it is a netbook so I don't have an optical drive to run the recovery CD. I'm doing a Livecd of Linux USB so I can back up my data... but I can do but reinstall at this point?

  Thank you.

  The afflicted system has a working CD/DVD drive (even an external).

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  If there is a problem starting, XP is configured to automatically try to start again and you can stuck in a loop not being able to go beyond the screen boot options, or none of these startup options you choose will work only.

  Sometimes, when XP has a problem starting or falls down and tries to start again, it will give you a "short" menu of boot options and none of them will appear to be good to get your system going again.  You have tried them all!

  The options are similar to the Advanced Boot Options menu XP, but the only option that you need (disable automatic error system reboot) are not offered, because XP went too far during the boot process and offers a limited number of boot options.

  If this is the case, you must call Options menu advanced boot yourself until you do not see the option:

  Disable the automatic restart in the event of system failure

  When you get the XP Advanced Options correct start menu, it has options on it like these:

  Safe mode
  Safe mode with networking
  Safe mode with command prompt

  Enable Boot logging
  Enable VGA mode
  Last good Configuration known (your most recent settings that worked)
  Directory Services Restore Mode (Windows domain controllers only)
  Debug mode
  Disable the automatic restart in the event of system failure

  Start Windows normally
  Reset
  Return to OS Choices Menu

  You need to choose in this menu is the option:

  Disable the automatic restart in the event of system failure
  
  Then if XP does not start normally, you will see an error screen with information and clues about the problem and then you can decide what to do next.

  If you do not see the automatic restart on system failure option turn it off, you must reset your system and start typing the key F8 on the keyboard until you see her disable automatic restart on system failure option.

  If you miss the window of opportunity F8, you must try again and start pressing the F8 key with more urgency (earlier and more frequently) until you see disable automatic restarts on system failure, and then select it.

  You must keep trying the F8 menu until you see disable automatic restart on system failure option, and select it.

  Answering queries and results report of the disable automatic restart on system failure screen and you can decide what to do next.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Fast forward and rewind

  When I play a file and want to move forward towards a particular point in time registration or back controls "Fast forward" and "Rewind" doesn't seem to work. The FF takes just the player at the end of the file and the RW just bring it at the beginning. There are no points between the two.

  Thank you

  Paul

  If you give the FF or REW button one press, this is what will happen. To ' scroll ' a song, press and hold the FF or REW until you get to the point where you want to resume.

  Of course, that "point" would be easier to find if the audio played during the 'research' as it did on the first series of e200v1.

• HP 8500 has more scan not scan - I hear a fast spin and the book will not draw in the charger

  HP 8500 has more scan not scan - I hear a fast spin and the book will not draw in the charger. I tried a reboot, including disconnect the motor from the power analysis. A software update was just pushed through today as well, but the problem with the scanner was before this update. This update took place after the power has been turned off, then on again.

  The problem occurred this morning during a prior scan + back. I heard a click or pop/fast spin, something that indicates something was wrong, when he tried to feed on the 1st backsheet through for the scan of the back. Now, it won't take what anyone, even to make a copy using the feeder.

  When I look at the roll holder bar above paper, I noticed that it does not drop down to make contact with the paper he move to the scanner itself. I remember having this problem once before - there are 2 years, while the warranty was still in effect and does not remember how it was resolved.

  Any suggestions would be welcome. I don't want to buy another printer just to get the scanner to feed again. The printer itself is fine and scan from the bed is not affected.

  For anyone interested, I sloved the problem of roller scanner do not push the paper into the ADF.

  I turned off the printer last night. Today, I removed the power cable at the back of the printer and then unplugged the power cord from the wall. It was off for about 30 minutes. I reconnect the cable to the printer and the wall, the printer running and waited about 10 minutes. So tired the charger scanner again. It worked and I don't know why.

  Yesterday, I tried a version of what I found in the documentation for HP support. He said to do, but not to turn the printer off first. He has not worked for me.

  I don't know if my path has really had no effect on the results, but it works now and I don't have to think about buying a new printer for awhile yet. I like this idea!

• Why my phone was telling me my copy of windows and not authentic after two years? I tried a system restore but it did not help

  Why my phone was telling me my copy of windows and not authentic after two years?

  I tried a system restore but it did not help

  Hello

  1. Windows you receive not genuine error?
  2. Did you do any software or hardware changes on your computer before the show?
   
  Follow the below mentioned article:
  Genuine Windows: Frequently asked questions:
  http://Windows.Microsoft.com/en-us/Windows/help/genuine/FAQ

• difference between a multiple and single-homing configuration

  Hello

  Could you tell the difference between a multiple and single-homing configuration?

  Thank you!

  Simple domiciliation: -.

  When you have a single any ISP as internet connection

  below the photo:

  single_homed.PNG

  

  Multi homing: you will be connected with two ISP an ISP or different ISP link.

  Kind regards

  Deepak Kumar

  www.deepuverma.in

• Domain name of band in the PEAP authentication

  Y at - it of the chance ny to strip the domain (domain\username) name in PEAP authentication?

  Need to set up proxy distribution to strip the domain name of the user name

  before checking the database. Let's say that our area is called SERVNET. We must have

  set the string "SERVNET\", "Prefix" Position, 'Yes' the Strip forward for

  local server. When users authenticate via 802. 1 x (PEAP), the domain name is stripped

  Since the user name.

  Also please order this CSCeg01533 bug before you try it.

  Kind regards

  ~ JG

  Note the useful messages

• Win 7 backup and restore, backup configuration does not work.

  Win 7 Home Premium Backup and restore, backup configuration does not work. I tried "clean boot", turned off all non-Microsoft services, pc restarted, Setup backup does not always work. When I click on the configuration backup, just open a Windows Explorer window in the System 32 folder. That's all. What now?
  Thank you
  Mark

  This problem is caused by a 3rd party shell extension. To identify the incriminated extension, use ShellExView.

  "When you click on"Set up backup"or click on"Change settings"in Windows 7 backup and restore, nothing happens or open the System32 folder."
  Follow method 2 in this page: http://windowsxp.mvps.org/slowrightclick.htm

• Several primary and physical databases Configuration ensures in Data Guard Broker

  Hello

  Is it possible to add two or several primary and physical databases configuration ensures in data guard broker?

  I have 1 primary databases and two databases physical standby that is

  (1) primary that is pri - (database primary)

  (2) secondary i, e, s (physical pending)

  (3) Secondary2 i.e. sec2 (physical pending)

  Practical AM sinister place, my scenario is my pri and dry machines are in seat, if the pri crashed it switch to s that works very well and my S2 is in another area office. Suppose that if my two siege machines pri and sec crashed, so I want to do my mahcine sec2 as primary.

  I have two separate computers to the broker a headquarters and a District Office

  Use failure of quick start on Data Guard Broker, broker headquarters machine I have configured pri and dry but in sector office broker not able congifured pri and S2 and the machine.

  can be done several primary database configuration with data bases on hold?

  Has anyone done this before, or has a perform a recovery after loss of place...

  need help or suggestion

  thanx

  No.... It is not possible. When you use the DG broker, the first thing you can do in the DGMGRL utility is to deliver CONFIGURATION to CREATE. You can see on the doc of this command that you define here the PRIMARY DATABASE.

  The command to add a DATABASE to the broker, adds a new database pending. You cannot add an another primary.

  The broker configuration is explicitly for a primary and all standby databases is supported. If you have an another primary, you create a separate DG broker configuration.

  See you soon,.
  Brian

• Supermicro onboard Intel and Adaptec RAID configuration unrecognized in ESXi 5.5 U2

  Hi, I have a supermicro X7DAL-E r1.1b motherboard has integrated Intel and Adaptec sata raid controllers. To enable raid controllers, I go into the BIOS and enable the raid configuration for intel or adaptec. I tried two raid controllers and created a configuration raid 5 by going through the bios of each controller. However, when I start to go through the process of installing ESXi 5.5 U2, I see not a logical drive, all I see are hard drives that I thought were configured as a logical drive in raid 5.

  I know that I am using an old motherboard which is not on the HCL, but I just haven't the money to spend on equipment. I really want to make it work if possible. I tried to download ESXi 4 but it is no longer available . I understand I tried to use an older version to see if it contains the necessary drivers for it work and attempt to port these drivers in ESXI 5.5.

  I was wondering if someone actually got this similar problem with supermicro Board and whether a solution or workaround has been found in which ESXi 5 can recognize the raid configuration? If this is impossible, it can't be done, that's what it is. I'll deal with it or put in place.

  Any suggestion would be appreciated.

  Not sure about this 'r1.1b' version, but original X7DAL-E has no onboard hardware raid controller. What he has is i5000 chipset, which offers the raid software-(aka bios-, faux-, etc.). This is not supported by ESXi (for very good reasons). And even if it were, no cache, you would get terrible performance...