Early 65 b error when istalling KB2463332

Similar Questions

• Error when you try to delete snapshots

  Hello

  I have problems when you try to manually delete snapshots of our ReadyNAS. The error is displayed when it fails is 28004020002. After a search through your forums it seems most of the time you ask newspapers, and then it seems that the problem is solved. So if need be I have newspapers available on request.

  One of the suggestions also says try a defrag on the device and that pops up and displays a different error message: 14007010000. I don't know if that is related, but I have not dug deep in this one I would like to help with the first issue first please

  All comments are greatly appreciated.

  This is the topic I was looking at early to try to help with my problem.

  https://community.NETGEAR.com/T5/backing-up-to-your-ReadyNAS/error-when-trying-to-delete-snapshot/TD...

  Fixed.

  Please do not restart the system until the balance is over. The balance will take time to complete.

  You can see the progress made in the web administration interface.

  In addition, you can plan a balance to say run every 2-3 weeks.

• We Build wave error when make it executable

  Hi guys,.

  It is a long shot, since I don't have much to go off in addition to a very vague survey error. The Details area looks like this:

  Click on the link below to visit the Application Builder support page. Use the following as a reference:

  Error 6a held to invoke the node in AB_EXE.lvclass:Build.vi-> AB_Engine_Build.vi-> AB_Build_Invoke.vi-> AB_Build_Invoke.vi.ProxyCaller

  Possible reasons:

  LabVIEW: File generic i/o error.
  =========================
  LabVIEW: File generic i/o error.
  =========================
  NOR-488: IO abandoned operation.

  Name of the method: Build: Application

  This error sometimes quickly,<10% progress="" on="" the="" build.="" other="" times="" it="" looks="" like="" the="" build="" has="" nearly="" finished="" and="" then="" it="" pops="" up.="" i="" used="" to="" be="" able="" to="" make="" a="" successful="" build="" by="" just="" trying="" a="" couple="" of="" times,="" but="" now="" after="" 10="" or="" so="" tries,="" it="" still="" looks="" like="" it's="" not="" going="" to="" work.="" please="" give="" me="" any="" suggestions.="" thank="">

  You know what... I remember having an error when generating an EXE file.  I don't know if it's the same exact error that you are talking about here, but your post reminded me earlier.  The solution I found was to make sure that I didn't have the target folder open when building it.  You may not be displaying the content of the target folder.  Try and see what happens.

• Loading of a DLL on RT: Missing Export "DecodePointer" "Kernel32.dll" and 7 error when calling the DLL

  Hi, I recently changed to Visual Studio 2010 and Windows 7 64-bit.

  I have an existing Office RT system running RT 2009.  This system calls a DLL that I already built using Visual Studio .net 2003 and Windows XP.

  Since I've recompiled the DLL I get an error 7 file not found error when I call the RT DLL, even if I simply replaced the old DLL with a new one in the file system so the path has not changed.

  I also noticed that the message on the screen connected to the RT system during startup:

  "achieveworldpeace.dll" load error: lack of export 'DecodePointer' of ' Kernel32.dll'.

  Any ideas on this problem?  It is perhaps as simple as a switch in the compiler?

  Thank you.

  I'm not sure it's a simple switch in the project settings in Visual C. The problem is clearly in the standard C runtime library that gets linked to your DLL and refers to exports of Windows which are not available on the RT system. Don't forget that the RT system is a limited Win32 API emulation.

  I usually avoid these problems using Visual C 6 to create DLLs for LabVIEW projects. The standard library of the C runtimes will not know what Windows API reference more recent exports because they have supported even under Win95. So unless your explicitedly reference code not supported RT APIs you wouldn't have problems. If you do not use the standard C file i/o functions and management of memory in your DLL functions, you can also try to link statically C runtime libraries in your DLL, or vice versa depending on what you have now. It may or may not work. Otherwise there is not much else but by using an earlier version of Visual Studio.

• LabVIEW 7.1 gives error when loading files

  Hi all

  I get missing VI error when I opened a file .vi .it charge about 480 sub translation problem - VI I face is that by loading of the Subvi

  will lack & when I opened this particular sub - VI, then the error message goes away.this is not specific to a particular subvi.anytime

  I open the program list of the vi missing is not the same as the earlier.since I'm going to convert it into a .exe file & if missing a few vi

  so this is incorrectable.also massive compilation is not the case

  in the hope of a quick response

  Dhiraj Kumar

  Hello

  Is not the problem of Version 7.1, I think you may have changed the location of the Subvi or changed the name of the VI. So generally I suggest you to keep all the Sub - VI slot in the same place, all in the same folder and link to the VI main if you change the name also to relate to the main VI and then save. To do this, and then create the EXE file.

• Receive the OXC0000022 error when you try to run the system restore

  Original title: OXC0000022 ERROR

  My problem started when I went to the site of JIGZONE Jigsaw, the picture window that shows the parts was not correct!  I thought I might have a virus so I ran avast, SuperAntiSpyware, and has not helped.  So I did the scan SCF/scannow and it did not show anything wrong.  Then I tried to do a system restore to an earlier date, that's when I got the error message and it has not restored, I changed to another date and no luck.   I went safe mode and tried to do the restore, no luck!  Help, please!

  My calculation uses Windows 7 Home Premium,

  Thank you!

  Carrman Daddy 2

  Hi Carrman,

  Sorry to hear that uninstall tool did not help uninstall you spybot and thank you for your update.

  It seems that when we try to uninstall the software, the software looks file uninstall.exe which might have been moved or deleted.

  I suggest you post this question on the forum of Spybot.

  http://forums.Spybot.info/forum.php?s=62ab5cf724e2426acbd901d146640e2c

  For your information: http://www.safer-networking.org/FAQ/How-to-uninstall-2/

  I hope this helps to solve the problem, email us for assistance.

• SSL Protol error when trying to play the Facebook game

  I get a SSL protocol error when I try to play a game on Facebook called Pot Farm.  I have already contacted the app support and they told me to make sure that my OS is fully updated with all the patches and I should be able to connect to the game.  I am running on a HP Pavilion 20 B-311 all in one PC with Windows 8.1 64-bit home edition.  The last time that I was able to connect to the game was right after that Microsoft has released updated earlier this month here.  I downloaded and installed the updates and restarted my computer.  I was able to connect to the game.  But later that day, I went to connect to the game again and started having the same mistakes.  From what I've seen on the research, there are many people who have the same problem as me.  Then I gathered all the necessary drivers.  And with a spare hard drive.  Installed Windows 7 Pro 64 bit.  I was able to connect to the game, but after that I did the last bit of updates.  I started making the same mistakes.  Does anyone have any ideas on how I could get this fixed?

  Hello Robert,.

  You can see the article mentioned below to solve the problem and see if that helps.

  Web browsers cannot connect to a Web using Secure Sockets Layer (SSL) site, after you install Microsoft KB2661254

  http://support.Microsoft.com/kb/2744241/en-us

  Also refer to:

  Certificate errors: FAQ

  http://Windows.Microsoft.com/en-us/Internet-Explorer/certificate-errors-FAQ#IE=ie-11

  I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.

  Thank you

• Error when you try to install 11.0.4

  Forgive me if this has been answered elsewhere.  I looked and not found this error in other posts.

  Adobe Application Manager gives the following error when I try to install the 11.0.4 update for AE CS6.

  

  -----------------------------

  Update failed

  Updates cannot be applied

  Please contact your administrator if you want to apply updates on your machine.  Updates have

  was deleted by the administrator.

  If problems persist, contact customer support for further assistance.

  ------------------------------

  I am the administrator (user solo) to my Mac Pro and try to install it from the Admin user.

  Mac Pro (early 2008

  OS X (Yosemite) 10.10.2

  2 x Quad - Core Intel Xeon 2.8

  8 GB 800 MHz DDR2 FB-DIMM

  ATI Radeon HD 2600 XT 256 MB

  Thank you for any assistance.

  You can try what did these people: Re: adobe application manager fails to update

• Error when creating a new DAC connection using the MSSQL connection type

  Hello
  
  I am trying to create a connection DAC, i.e. a new repository DAC in the SQL Server 2008 database.
  Version of the DAC: 10.1.3.4.1
  Database: SQL Server 2008
  
  
  I downloaded from the link below sqljdbc4.jar file and placed it in the D:\orahome\10gR3_1\bifoundation\dac\lib folder.
  [http://www.microsoft.com/en-us/download/details.aspx?displaylang=en & id = 11774]
  
  I entered all the details correctly to the name of the database, the database host, port of the database. I created a new file for authentication.
  
  I get error when I try to test the connection below.
  
  Driver MESSAGE: MSSQL not available!
  CLASS EXCEPTION: java.lang.IllegalArgumentException
  
  com.siebel.etl.gui.login.LoginDataHandler$ LoginStructure.testConnection (LoginDataHandler.java:512)
  com.siebel.etl.gui.login.LoginDataHandler.testConnection(LoginDataHandler.java:386)
  com.siebel.etl.gui.login.ConnectionTestDialog$ Executor.run (ConnectionTestDialog.java:290)
  
  : CAUSE:
  MESSAGE: com. Microsoft.SqlServer.JDBC.SQLServerDriver
  EXCEPTION CLASS: java.lang.ClassNotFoundException
  
  java.net.URLClassLoader$ 1.run(URLClassLoader.java:200)
  java.security.AccessController.doPrivileged (Native Method)
  java.net.URLClassLoader.findClass(URLClassLoader.java:188)
  java.lang.ClassLoader.loadClass(ClassLoader.java:306)
  Sun.misc.Launcher$appclassloader$ AppClassLoader.loadClass (Launcher.java:276)
  java.lang.ClassLoader.loadClass(ClassLoader.java:251)
  java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
  java.lang.Class.forName0 (Native Method)
  java.lang.Class.forName(Class.java:169)
  com.siebel.etl.gui.login.LoginDataHandler$ LoginStructure.testConnection (LoginDataHandler.java:510)
  com.siebel.etl.gui.login.LoginDataHandler.testConnection(LoginDataHandler.java:386)
  com.siebel.etl.gui.login.ConnectionTestDialog$ Executor.run (ConnectionTestDialog.java:290)
  
  
  The error seems to be a problem of connectivity to SQL Server. I use the correct jar file?
  
  Please, help me to solve this problem. Appreciate the help given on this forum earlier.
  
  Thank you

  Add
  .\lib\sqljdbc4.jar
  at the end of the line beginning with SQLSERVERLIB in the file config.bat

  Pls correct brand

• Conflict error when you try to download to the cloud of my tablet of Note

  Three days ago, I started to get an error when you try to synchronize new files in the cloud.  They will try again and again until I turn sync access to the wide, actually.  Also, I have Photoshop nc6 and has been added to the early access computer access and when this problem started.  I really need to be able to save my files psdx somehow and for the moment, the cloud is the only way to the soft touch.  A way to solve this problem?  I'm on a Samsung Galaxy Note 10.1 and Android Jellybean 4.1.2.

  Make sure that you are connected to creative cloud correctly via the settings icon in the top right of the workspace project selection > my account. (It looks like a gear). One reason, this option is kablooey from time to time.

• Error when creating connections of system files

  I am currently trying UI lapoursuitedes with ADF faces.
  
  I have encounter this error when I try to create a connection to file system to a JAR file that I was sent successfully, but when I try to test the connection I got this msg: the path of the specified file system is a directory. Basic path=[C:\Infrastructure\UIResources\deploy\adflibUIResources1.jar] solved path=[C:\Infrastructure\UIResources\deploy\adflibUIResources1.jar]. This indicates succeeded my link with the jar file that I created earlier. The directory of the path here is exactly the same, as I deloyed.
  
  Please help me
  
  Thank you
  Shirleen
  
  Published by: Shirleen on July 16, 2009 10:59

  Shirleen salvation,

  You must give only until the directory path, does not include the file. Try Don 'C:\Infrastructure\UIResources\deploy' for the path of the directory, once the connection is created, you should be able to see the jar under the connection.

  Jean Lou

• How can I switch from 9.3 to 10 iOS iOS? I m getting an error when I install it

  How can I switch from 9.3 to 10 iOS iOS? I m getting an error when I install it

  Kareems, how are you trying to install? Live? Or from iTunes. You can connect your phone to your computer and launch iTunes and have iTunes download and update the phone.

• Error when moving the message to the mailbox (null)

  I don't understand what that means. I looked in 'Apple Mail Help'.

  He showed after that I change a password for an account alias. The message appears when I delete an email.

  What should I do to stop it?

  

  Hi Grant, David,.

  Looks like you found an error when deleting emails once you have changed the password for an account alias. Given that the account of the alias is used as a virtual e-mail for a main account, you should try to update the password for the e-mail account of the alias in the Mail app and Internet account settings via system preferences.

  In system preferences:

  1. click on Internet accounts
  2. highlight the main account needs the password updated
  3. Enter the new password
  4. close system preferences.

  In the Mail application:

  1. click on Mail preferences from the Mail menu bar.
  2. Select the tab accounts.
  3. Select the account that needs the password updated.
  4. Enter the new password.

  Update the password in these 2 places on your Mac must have this error message passed in no time. Please use the Apple Support communities to post your question.

  Good day.

• Why I get a loading error when not supported and wear my watch?

  I wonder why I get this error when you wear my watch, it appears like 5 or 6 times a day

  Hello

  It can help to boost your watch:

  -To turn off: press and hold the button side until you see the cursor off the power; slide it to turn off;

  -To reactivate: press and hold the side button until you see the Apple logo.

  If the problem persists, contact Apple support (mail service may be available) or make a booking Genius Bar in order to have your watch checked under warranty:

  https://www.Apple.com/support/watch/contact/

• What is a 60 error when trying to share an iMovie on a disk?

  What is a 60 error when trying to share an iMovie on a disk?

  I have no idea what to do, but I was able to track down the actual error = "error-60 badMDBErr: bad master directory block"

  I could see the results of Google that dates back years for [imovie error "60"] - without parentheses

  ATTENTION: a result leading to a YouTube video was a veiled MacKeeper scam! Do NOT use MacKeeper or any other software!