Earn 8.1 hp laptop and stop problem

Similar Questions

• Unload the battery G450 and stop problem

  When this unit is operating in mode 3G as modem battery discharges and stops.
  I tried to remove and replace the battery, as is stated in the user manual, but still no results.
  Somethimes do this but not all the time.
  It is very annoing to find in the middle of a conference and stop.
  I tried to contact toshiba Romania, they said that another version of the software is under development for this device, but 5 or 6 months I did not hear anything on their part.

  Best regards!
  DG

  I do not joke with customers of Toshiba. Maybe you're on the wrong forum.
  At the top of this page says Toshiba computers support forum.
  AFAIK G450 is perhaps mp3 player or your phone, but certainly has nothing to do with computing.

  I recommend you contact your local dealer where you purchased this device and ask for help.
  If all goes well, they will be able to help you with this problem and propose the right solution.

• Start and stop problems under Vista

  My PC has started taking much time to stop and start.  I didn't install something again and stopped all my programs auto starting but always start and stop takes forever. Can help in any...

  Hello

  Make sure you have the services Superfetch and ReadyBoost are running and then try to speed up the boot with the help of my guide [1]. This causes the prefetcher in Windows Vista. This increase startup performance a lot. All other tweaking tools are useless. Use this method only with the Microsoft Toolkit.

  If it is not to speed up the startup process, follow my guide [2] to start track and to compress theboot_BASE + CSWITCH + DRIVERS + POWER_1.etl as RAR or 7z, also make a trace of the judgment and compress theshutdown_BASE + CSWITCH + DRIVERS + POWER_1.etl too and download the 2 files zip on your Skydrive [3] and post the link here.

  I take a look at the trace, maybe I see what's wrong with your Windows.

  André

  [1] http://www.msfn.org/board/index.php?showtopic=140262
  [2] http://www.msfn.org/board/index.php?showtopic=140247
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02db-4665-993a-08d865088d65 [3] "a programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Starting and stopping problem

  I use the HP Pavilion g6 - 2248ca laptop now, and its power does not turn off after closing down.  In addition, my phone was locked to the HP or Compaq logo sometimes during the startup screen.  Right now I use window 8.1, but startup problems occur before moving on to the 8.1 window. (Before I had a window 8.)

  Hi llpang,

  What is the error message you get when the laptop goes down? It seems that the computer is not close but goes into hibernation mode. Click on the link below and under the Hibernate mode section click on Hibernate your PC, it will show you how to put your computer in Hibernate mode. Follow the document and if it is already set to Hibernate switch off.

  http://Windows.Microsoft.com/en-CA/Windows-8/how-shut-down-turn-off-PC

  Let me know how it goes.

  Thank you

• Automatic updates to overload a laptop and an accident?

  Some of my friends have encountered problems with computers laptops inspiron, in which case the automatic updates overload their laptops and stop their work. Is it still a problem?

  Hello Katherine_,

  Thank you for your message.  No, Windows Update will not cause overloading the computer.  Windows Update provides updates to security patches and vital to keep your personal data and protected stories.  I hope this helps answer your question.

  See you soon

  Jason H. Engineer Support of Microsoft answers visit our Microsoft answers feedback Forum and let us know what you think.

• my laptop suddenly stopped to connect to any bluetooth device. I restored my system and removed the programs installed before having this problem.

  my laptop suddenly stopped to connect to any bluetooth device. I restored my system and removed the programs installed before having this problem.

  Hi sh8kdown,

  Thanks for posting this question in the Microsoft Community!

  I understand that you can not connect to Bluetooth devices on the computer. I'm sorry for the inconvenience caused to you. Rest assured that I will do my level best to help you.

  (1) what is the brand and model of the computer?

  (2) what is the model number of the Bluetooth devices?

  (3) you get an error message?

  (4) did you of recent changes to the computer before the show?

  I suggest the following methods and check if it helps to solve the problem.

  Method 1: Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: Troubleshoot issues with Bluetooth devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  (Applicable to Windows 7 as well)

  Method 3: Error: "Pilot of Bluetooth device not found" when you try to connect a bluetooth device: http://support.Microsoft.com/kb/2654568 

  Reference:--

  Add a Bluetooth device to your computer: http://windows.microsoft.com/en-US/windows7/Add-a-Bluetooth-enabled-device-to-your-computer

  Change settings for a Bluetooth compatible device:

  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-a-Bluetooth-enabled-device

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  Kind regards!

• problems with a Probook s 4530 and earn 8.1 x 64 and card RALINK Wireless

  Good afternoon

  I have reported a problem with the installation of Win 8.1 Enterprise on a HP Probook 4530 s which has a RALINK RT3592BC8 wireless card installed.  This card has the info printed on it.

  Rev: 01:00

  SPS:630813 - 001

  Release date: 2011/05/21

  Mac ID: 68A3C4BBD32E

  CT: GBRFA00FK0M86K

  SPS: 630813-001

  HP part number: 629887-001

  WCBN607RH-H1

  THE COMIC BOOK ID: 68A3C48947BF

  The laptop had already installed a copy of the company to earn 8 x 64.  the laptop was working fine on this OS, however we migrate to Win 8.1 Enterprise but this laptop would never apply the inplace upgrade.  We were trying to replace the older readers of 5200 RPM in laptops, and I bought an SSD 250 GB EVO 840, and as I was replacing the HARD drive, I also decided to install Win'a 8.1 x 64 business.  The installation went well until installing Windows begins loading the drivers.  Around 60% the error came that there was an error "irq not less or equal to".  I checked the HARD drive in another machine and was able to install a business Win 8.1 x 64 on it, so I wiped the install and tried again.  Failed a second time.

  At this point, I thought that there was a device that Win 8.1 wasn't satisfied and as by chance the wireless card was easy access to the laptop so it was my 1st point of call.  Installation went through after withdrawal of the wireless card and try again the installation of win, fine.  I was also able to install our 2013 Office without problems and the 1st round of updates to victory.  On the 2nd round, I thought I want to reinstall the wireless card, for cranking up the dreaded irq not less or equal to returned to the top and the machine was in a reboot cycle.  During a start/stop cycles, I turned off and removed the wireless card and the machine very well.

  It seems that there may be a problem with the card stock RALINK RT that comes with a HP 4530 wireless.  At this point, I had to remove the card from the laptop, until I can find an alternative.

  I see a lot of messages about the causing problems ralink drivers/device, but I can't seem to find the right driver to use for the x 64 bit 8.1 on a 4530 (map exceed the details) and what the correct procedure is to have this card works correctly for future upgrades of windows?  can someone enlighten me please?

  Thank you

  Mike

  Hi, Mike:

  The only suggestion I can offer is to try the latest version of the driver Ralink W8.1.

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_142231_1

  If this does not work, I suggest you only replace the card wireless with one of those enrolled in the service manual has a better chance of working with W8.1, such as an Intel wireless card.

  When I click on the support page for the 4530 s, I see only a limited amount of W8.1 drivers available which normally isn't a good thing about the compatibility of the device 100% with an operating system.

• Problems with sleep and stopped after upgrade to Windows 10

  Hello

  So I'm going to sleep problems and stop once I have upgraded to Windows 10 laptop won't sleep or stop correctly. The screen turns off, but the power LED remains lit and fan as well. If I chose the sleep he wakes up little matter what I try, and I have to make a hard stop at every time.

  Any solution to this problem?

  Thank you.

  1. Download version 9 or 10 of the Intel Management Engine Interface (MEI) driver.
  • Navigate to HP Software and Driver Downloads site (http://www8.hp.com/us/en/drivers.html) to find the last pilot approved for your model.  Filtrer filter by version, select Microsoft Windows 8.1 on the menu drop-down.  Find the download in the category 'Driver-Chipset'  If a pilot of MEI with a version from 9 or 10 number is listed, download.  [9.5.24.1790 version 1.5 M (http://ftp.hp.com/pub/softpaq/sp66001-66500/sp66228.exe) works for most models.]
  • If a pilot of MEI with a version from 9 or 10 number is NOT listed, download the driver appropriate directly from Intel (https://downloadcenter.intel.com/search?keyword=intel+management+engine).  [9.5.24.1790 version 1.5 M (https://downloadcenter.intel.com/download/23091/Intel-ME-9-Management-Engine-Driver-for-Intel-NUC) works for most models.]
  2. Download the Package of troubleshooting Windows 10 "show or hide updates" (http://download.microsoft.com/download/F/2/2/F22D5FDB-59CD-4275-8C95-1BE17BF70B21/wushowhide.diagcab).
  3. Change the Windows Update Services automatic (delayed start) parameter to the manual.
  • In Control Panel, select administrative tools, and open Services.
  • Go to Windows Update and double-click it to view its properties.
  • Click on stop to stop the service to run.
  • Change the Startup Type to manual, and then click OK.
  4. Install version 9 or 10 of the Intel Management Engine Interface (MEI) driver.  If you receive a warning dialog box about the replacement of a newer version of the software, accept it.
  • NOTE: You have NO need to uninstall version 11 before installing version 9 or 10.  The presence of a version of the driver is required to 'upgrade' (or demote in this case).
  5. Run the Windows 10 Troubleshooting Package 'Show or hide updates' and hide the updates of the Intel Management Engine Interface (MEI) driver.  (This will block your system automatically reinstall or display of updates for version 11 of the pilot).
  6. Change back the setting of Windows Update Services to manual automatic (delayed start).
  7. Restart your computer.
  8. Rejoice!  You can finally sleep and stop again.

  -DanG

• My laptop heats up and stops

  I bought my laptop in the United States and use the same card. Perhaps that is the reason, but I'm worried seriosly as my mobile after an hour of use would become very hot and stops. I don't know what the problem really is, but lately it seems to stop even quickly.

  I thought the fans might not work, but they were when watching them. He came from the all-new, and I used it like that for six months now. But as the problem became worse, I thought to ask for help here. Is there something I can do?

  Thank you.

  HI Shalav,

  Your laptop will most likely use a 'universal' adapter so it does not work perfectly well in the United Kingdom as well as in the United States.

  Your problem is more likely to be an accumulation of dust in the CPU-heatsink that will reduce its effectiveness to the point where heat build-up causes the thermal protection circuit to opertae and cut the power.

  Clean any buildup of dust and also ensure that there is sufficient air to circulate through the cooling system. Leave many spoace around and under your laptop.

  Kind regards

• iHP G70-460us computer laptop and the webcam has just stopped working

  I have a HP G70-460US laptop and the webcam has just stopped working.  How to run again.

  Hello

  Please find the link given below might help you solve your problem.

  Webcam troubleshooting (Windows 7)

• HP Pavilion x 360: stop and sleep problems

  I've updated for Windows 10 and now my computer won't shut down or sleep. In order to shut down the computer completely I have to restart my computer, and then stop. If I used my computer for more than an hour, it will not be stopped or he wake up from sleep mode. I have updated my drivers and graphics cards, as well as disabled the quick start. I checked the BIOS and there is no update available. I also ran the updates of Windows. At this point, I don't know what else to try.

  Hi @bn485,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion Notebook of 360 and problems with the Shut Down mode and sleep.  I see that if you change the balanced power plan options option in the book will help. Here is a link that will help you.

  Go to your power options. Select balance, then click on change plan settings. Click on change advanced power settings. Then save changes. Restart your computer and see if the options have changed.

  You can try to use the Windows Update Troubleshooter to fix updates that do not come through Windows 10.  Please restart the laptop twice to make sure that all updates are completed!

  You can also try:

  In Device Manager, click the arrow next to display adapters to expand this category
  Right-click on the graph, and then select Update driver software if more than 1 graphic adapter do 1 at a time.
  Select search automatically for updated driver software.

  The laptop must find and automatically install the updated driver
  Once the installation is complete, restart your laptop.

  I hope that helps.

  Thank you.

• How can I prevent the shutdown task scheduler engine, get the new display detected to work and avoid receiving the message "Internet Explorer has encountered a problem and stop"? __

  My laptop is a Dell Inspiron 1520, running Windows Vista Home Edition Premium and Internet Explorer 9.  My extra monitor is a Sharp Aquos LED HD - TV, the model LC-46LE700UN.  I've been using a VGA cable to me onnecter the laptop and TV.

  The laptop seems to operate normally when not connect to the TV.

  As soon as the VGA cable is connected to the laptop (without being connected to the TV), the following message appears:

  'Microsoft Windows - Task Scheduler engine has stopped working.  A problem caused the blocking of the program works correctly.  Windows will close the program and notify you if a solution is found. »

  When initially, I connected the laptop to TV, "new display detected" was automatically acti EV.  Soon, it was activated is no longer automatically.  I was able to activate manually using Windows Mobility Center during automatic activation failed initially but now Windows Mobility Center no longer detects the new view.

  Using Fn + F8, I can view the image on the laptop or TV, but not both simultaneously.

  The message "Internet Explorer has encountered a problem and stop" appears intermittently, but I can still make internet sites and show the content after the message.

  I have download software, myp2p.eu, a site for watching TV programs "streaming", including PPStream, Sopcast, Live, Stream Torrent Sina, a Swarm, TVAnts, UUSee, VGO and Veetle player and canceled downloads for PPL (who failed an integrity check), PPMate (corrupted) and (blocked) TVKoo.

  Norton Security quarantined the installer of UUSee, indicating that it was a high risk of program with many users.

  To a computer repair shop and using a different additional display flat screen, I could not duplicate the problems yesterday (4 October 2010), when the "new detected display" has been activated automatically, and I could see the photo or the other and both screens.

  I tried to restore the system to a date (on the list) before when the problems occurred first - failure of the restoration of the system.  I tried to use scandisk, but received no indication that he had performed and corrected all errors found after restarting Windows.  I looked at responses from forum, the display setting and the new display detected support literature.

  How can I avoid these problems?  Help!

  Hello

  Restoring the system end up with any error message?

  This could also happen if one of the substantive programmes is in conflict with the proper functioning of your computer. To troubleshoot error messages and other issues,
  You can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Steps-
  1 log on to the computer using an account with administrator rights
  2. click on start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue
  3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)
  4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all

  Note: Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services.
  If you disable these services, you can permanently delete all restore points. Do not do this if you want to use with existing restore points system restore utility

  See this article-
  http://support.Microsoft.com/kb/929135

  This should solve your problem.

  -Robert

• I am trying to reinstall vista on another laptop and when I get to the last step (end Installation...) it stops, about 70% of the way through. Now what? I tried to repeat the process about 6 times now!

  I am trying to reinstall vista on another laptop and when I get to the last step (end Installation...) it stops, about 70% of the way through.  Now what? I tried to repeat the process about 6 times now!

  Sorry for the confusion.  I must be useless to English.

  Forget the two laptops.
  I have a problem with a laptop that I tell you all (the Inspiron 1720).
  The disc that I use is labeled as a Windows Vista reinstall disk and provided with the computer when I bought it.  I'm not trying to use it on another computer.

  Reference Dell it is a problem with a process of recovery of Windows and, therefore, a problem of Microsoft.

  See you soon

  Problems with the Dell restore process, contact Dell.
  Dell wrote their recovery process and provided you with this DVD, NOT Microsoft...

  It is their software.

  Ask them for a different recovery DVDs.

  You say that the hard drive has failed.

  He could have more than just tough that failed.
  You can have other hardware issues.

  Hardware issues are beyond the scope of these Forums.

  Good luck with Dell.

  See you soon. Mick Murphy - Microsoft partner

• After I install my laptop bootcamp has restarted and said there was a problem and restart your laptop then I check my memory of the laptop and my mac 210 GB is 180 GB and when I checked the scores he had only a mac partition

  After installing bootcamp my laptop has rebooted and said there was a problem and restart your laptop then I check my memory of the laptop and my mac 210 GB is 180 GB and when I checked partitions there was only a mac partition and I can't get back the deleted memory

  Post a screenshot of what shows utility disk to disk

  How to take a screenshot on your Mac - Apple Support

  OSX works OK?

• Hello. There is a problem on the IPhone s 5 - after reset, the display flashes on the sides for 10 minutes, then the flashing stops. And the problem does not appear again until they do not use a Hard Reset (Power Home). The phone is new (5 days). It's a m

  Hello. There is a problem on the IPhone s 5 - after reset, the display flashes on the sides for 10 minutes, then the flashing stops. And the problem does not appear again until they do not use a Hard Reset (Power + Home).

  The phone is new (5 days). It's a wedding?

  If you encounter this flicker, then the next troubleshooting step is to restore from a backup. If the behavior persists after the restore, then the last step is the factory restore. If after the factory restore and adding no additional content, you see always this problem, then you must make an appointment at the Genius Bar to the nearest Apple store or service provider authorized Apple to have the material examined. If the behavior goes after the factory restore, then sync again your content manually, without using the backup. It seems to me it's corrupted content in the backup.

  Restore your device from an iCloud or iTunes backup - Apple Support

  Use iTunes to restore your iPhone, iPad or iPod settings - Apple Support