Easy Connect or remote work support

Similar Questions

• How can I get the Easy Connect feature in Windows Remote Assistance to work?

  I am using the Easy Connect feature in Windows Remote Assistance and he tells me that he 'could not connect on the peer-to-peer network. Both computers are running Windows 7, but I don't even get the chance to say even the computer that I want to. I'm not on a corporate network and the Easy Connect function works fine on three other computers on my home network, including two run Home Premium and other professionals, so it may not be a problem with my router. My computer works professional. I tried to use it on wireless and wired. My computer, as well as others, I tried it on, use Microsoft Security Essentials and Windows Firewall. Among the computers on which I tried it as well as mine works µTorrent. All computers run Fomine NetSent GUI. Two of the other computers I've tried on and my own running LogMeIn. I checked the Remote Assistance settings on my computer and it is allowed. I don't know what else might be able to do this!

  Hello

  Please follow the given Thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/neither-easy-connect-nor-remote-assistance-work/5ee1feac-05c7-4101-8347-102e94b9a06f

• EASY CONNECT STOPPED WORKING

  I clicked on ' nearby remote assistance and resolve problems "and he says:

  Problems found

  Your computer seems to be configured correctly, but the device or resource (Server NVRP) does not

  The PNRP cloud specified could not start correctly the server: prnpv2.ipv6.microsoft.com; pnrpv21.ipv6.microsoft.com

  I don't know what all this means.

  It stopped working before... I installed McAfee and after a bit of reading on the internet, I got rid of McAfee and Easy Connect reworked.

  Now I just use Windows Defender and Windows Firewall and have not installed anything new with the exception of Windows updates.

  Thanks for your suggestions.

  Additional wire duplicate content:

  EASY CONNECT STOPPED WORKING

  I clicked on ' nearby remote assistance and resolve problems "and he says:

  Problems found

  Your computer seems to be configured correctly, but the device or resource (Server NVRP) does not

  The PNRP cloud specified could not start correctly the server: prnpv2.ipv6.microsoft.com; pnrpv21.ipv6.microsoft.com

  I don't know what all this means.

  I just used Windows Defender and Windows Firewall and have not installed anything new with the exception of Windows updates.

  I tried troubleshooting network and the internet and the problem persists.

  I looked at what follows, and they did not help to get Easy Connect works again.

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-use-easy-connect-with-Windows-remote-assistance

  http://Windows.Microsoft.com/en-in/Windows/Windows-remote-assistance-FAQ#1TC=Windows-8

  Hi compounded,

  Thanks for posting on Microsoft Community.

  I appreciate your efforts to try to solve this problem.

  I'm sorry to know that Easy Connect does not work and it seems that there is a problem with the connection to the peer name resolution server.

  In peer-to-peer environments, peers are based on name resolution systems to resolve each and other locations (addresses, protocols, and ports) from names or other types of identifiers network. Peer-to-peer name resolution has been complicated by transient connectivity and shortcomings in the domain name system (DNS).

  Peer-to-Peer networking platform solves this problem with the PNRP Peer Name Resolution Protocol (), a secure, scalable, and dynamic name registration.

  This question might be the best answer by TechNet. Then I suggest you send the request on the TechNet forums.

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  In the future, if you have problems with Windows. Not to contact us. We will be happy to help you.

• Unable to connect using easy connect or email invitation

  I'm having a problem connecting with Easy Connect. I had no problem when I lived in Orlando and helped my mother with her computer. She would tap the Easyconnect connection to me, and I would click on him and had NO PROBLEM. Now, I moved to Texas and tried several times to connect and cannot. I don't get the unable to connect due to errors in hand to hand, but it sits there and plays as is hunting for her, but does not connect. I even tried with enamel and got the same results. I was wondering if my router has been a problem, but used my another laptop as host and connected within one minute to each other. Is there a problem here or is true to his bad rep Microsoft?

  I can't think of anything. I know that his machine has not changed configurations as I'm the one who does this.

  See if it helps;

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/neither-easy-connect-nor-remote-assistance-work/5ee1feac-05c7-4101-8347-102e94b9a06f

• "Remote Desktop connection has stopped working" problem on Windows 7.

  When I try to connect to one of my Windows 2003 servers from my Windows 7 Ultimate pc, I get an error:
  "Remote Desktop connection has stopped working". It has something to do with the NLAapi.dll. If I rename this dll, TS works very well. I used the dll from another computer running Windows 7 RC and it works too, but in one of these two cases, while it corrects the TS connection, it causes other errors, maily with the network and sharing Center. Long story short, I think that there is a bug with nlaapi.dll. I can connect properly to my boxes of Windows XP SP3 servers. I ran all the updates on my 2 k 3 box, but still does not work.

  Here is the log of the event viewer:

  Name of the failing application: mstsc.exe, version: 6.1.7600.16385, time stamp: 0x4a5bce80
  Name of the failed module: NLAapi.dll, version: 6.1.7600.16385, time stamp: 0x4a5bdfc9
  Exception code: 0xc0000005
  Offset: 0x000000000000c138
  ID of the process failed: 0xf90
  Start time of application vulnerabilities: 0x01ca55cc39bf05f0
  The failing application path: C:\Windows\system32\mstsc.exe
  Path of the failing module: C:\Windows\system32\NLAapi.dll
  Report ID: 7772b4f0-c1bf-11de-bfa2-001d60a28de8

  Hi dekopolis,
   
  Thanks for visiting the site of the community of Microsoft Windows 7. The question you have posted is related to the Server 2003 and would be better suited in the Community (Insert here). Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/categories/ Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Remote Assistance error: "Easy connect, not available.

  Original title: easy Remote Assistance connect will not work

  I have 2 systems of windows 7 on a local network using Qwest PK5000 modem-router.  Both systems are connected via the home network and share files between them very well and there is only 1 active network.

  If I run the MSRA command on the 64-bit computer and select easily connect using the option "help somebody", the system displays the security code for the other system to use or "invite".

  On the 32-bit machine when I try either options it goes to the "easy connect, not available.  Network Diagnostics has found no problem, but if I try to access the Internet connectivity evaluation tool I can't in the tool.  It says at the bottom "IE6 is required" and nothing happens.   So I don't know if the PK5000 was the Peer Name Resolution Protocol on it or not.  Qwest or Actiontec will not respond to the request.  I guess it's OK if the 64, but the machine would not immediately come with the password to use on the other machine.  The command ipconfig/all look the same on both machines. Furthermore, both systems are (Inspiron 580) and DELL (XPS 420).

  Please give me more advice on this problem.

  Problem solved!

  Downloaded "Teamviewer.exe www.teamviewer.com.  It is a product of superior quality on remote assistance and is free for non-commercial use and it works great both ways. And it allows control over the other system instead of simply consider.

• MCE IR remote stops working when connected via Remote Desktop Win7

  I recently added an IR remote for my computer to Windows 7 (32 bit Ultimate) that I use mainly for playback of mp3. The remote control is only an AVS Gear MG-IR01BK Windows Vista/Window7 MCE Remote control infrared works by attached USB "infrared transceiver eHome.  When I physically connect the machine IR remote works perfectly; as soon as I connect via remote IR Office stops responding.  I had to configure the Audio remotely to RDP to get this to work correctly, but I can't find any setting that controls in response to the infrared remote control.  My quest for answers has turned up nothing so far, someone has suggested?

  Thanks for the suggestion.  At thegreenbutton.com behavior that I have reported was confirmed by others (the MCE Remote control is a HID device, so is related to the "console"). VNC is a viable alternative to remote desktop. I ended up using TightVNC (RealVNC purchase required for support of Windows 7), and the infrared remote control continues to work when I access the machine via the VNC viewer.   I want to remote desktop could provide this capability, but at least I have a working with VNC solution.

• Can not get to start remote access connection manager and the connections don't work Internet

  Original title: wired & wireless connections does not.

  I can not get the remote access connection manager to start and so no internet connection is not working, also I can't open the system restore to go back on this machine. What is this?

  I am running a Dell Studio 1735 PP31L w model number / Edition Vista Home premium.

  Hi Rick,

  1. what happens when you try to start the remote access connection manager? You receive messages or error codes?

  2. you receive error codes or restore messages when you perform the system?

  You can check the status of the following services and make sure that the services are started.

  a. Click Start and type Services in start search and press ENTER.

  b. in the services with the right button on the phone and then click Properties.

  c. under the general tab, select automatic next to startup type.

  d. under the general tab, click Start under the service status and then click apply and then click OK.

  e. Repeat steps c & d to the remote access connection manager and Remote Access Auto Connection Manager service.

  Hope this information is useful.

• Remote Desktop Connection has stopped working since 7 for 2008

  Hello

  Dears I have strange problem and I have read everything discussed here, but it's not helping

  I have asus laptop with Windows 7 Home x 64 N53SM

  everything beautiful, and up-to-date

  Remote Desktop works well also

  one problem I can't use desktop remotely from my laptop to any server that is running windows server 2008 exactly... .other version 2003 work ok

  When I try to access to any server ruin win 2008 Server and put the server ip and password user name years and hit enter I see the error message

  Remote Desktop Connection has stopped working and computer laptop freez second then back with this message

  (Remote Desktop Connection has stopped working)
  A problem caused program stop working correctly
  Windows will close the program and notify you if a solution is available

  This is the complete log of the event viewer

  Results for: Microsoft product: Windows operating system; Version: 6.1.7600.16385; Event ID: 1000. Event source: Application error;

  ===========

  Name of the failing application: mstsc.exe, version: 6.1.7601.17514, time stamp: 0x4ce7ab44
  The failed module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec4aa8e
  Exception code: 0xc0000374
  Offset: 0x00000000000c40f2
  ID of the process failed: 0 x 1418
  Start time of application vulnerabilities: 0x01cd48bcf13be48a
  The failing application path: C:\Windows\system32\mstsc.exe
  The failed module path: C:\Windows\SYSTEM32\ntdll.dll
  Report ID: 39102a22-b4b0-11e1-a89a-005056c00008

  ===========

  Please help me to solve this problem without need format :)

  Hello

  As you try to desktop connection remotely from Windows 7 to Windows Server 2008, it would be preferable to send the same in the Technet community for more help.

  http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads

  Hope the information is useful.

• try to use easy connect to befriend isqlplus but does not

  Using the Easy Connect naming method
  
  of http://download.oracle.com/docs/cd/B19306_01/network.102/b14212/naming.htm#sthref783
  
  I want to connect to isqlplus remotely.
  
  Forgive me if I ask this stupid question,
  
  do I need to install the oracle client to use isqlplus. If Yes, then no need to answer the question above.
  
  I mean with browser without a doubt, I can reach the url, but when it prompts for the connection string, I try the replace by the
  
  
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = globalro-417667)(PORT = 1522))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = tomkyte)
  )
  
  so I wonder if I'm doing the right thing or not.
  
  Thank you!

  Hello

  See the link support entirely, the page which you referred it self says 'this chapter describes how to configure the connectivity information for client connections to the database server'. If the Client is required.

  Clients can connect to a database using easy connect server name if the following conditions are met:
  -Oracle Database 10 g Net Services software installed on the client.
  -Support for the oracle TCP/IP on the client and the database server protocol
  -No functionality requiring a more advanced connect descriptor is required

  Everything is there in the Document ORACLE.

  -Pavan Kumar N

• Started at Mo and not charging with the charger connected. Charger works. Keyboard not workin except power button / stop. Restarted using ex in car without success. SW

  Started MacBook and not charging with the charger connected. Charger works. Keyboard does not not except the power button / stop. Restarted ex drive no available help hoping that it was a matter of SW. SW and the operating system works very well. Read some info online. Tried to reset the SMC. Now, the MacBook does not start. Can U help me please. Thanks in advance.

  MacBook, 2010, Mac OS X 10.6.8

  Hi Veronica Steward,.

  I understand that you have turned into a series of questions about your MacBook and want help getting the computer to turn on. Here is an article that can help you through the steps to fix this problem:
  

  If your Mac will not turn on - Apple Support

  Let us know how it goes and thanks for coming to Apple Support communities.

  See you soon.

• Restore windows files when the connection does not work

  After an accident at some point, I noticed "Restore to folder windows when connecting" did not work.

  In "Folder Options - view" it is checked.  Also, I did 'Restore Defaults' and rechecked it.

  Confirmed also with regedit it wasHKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced\PersistBrowsers set.

  Another user on the system do not have the problem.  How can this be corrected?

  Concerning

  Ray

  Raymond,

  What is the version of Windows installed on the computer?

  I wish that you perform a scan of System File Checker-

  https://support.Microsoft.com/kb/929833/en-us

  If it does not then, I would have you decant the contents of the user account to a new user account this account is possibly corrupt.

  Refer to this article-

  http://Windows.Microsoft.com/en-CA/Windows/fix-corrupted-user-profile

  Thank you.

• Windows easy transfer will not work. I get the message: "migwiz.exe - point of entry not found. How can I fix it?

  Windows easy transfer will not work.  I get the message: "migwiz.exe - point of entry not found.  How can I fix it?

  Hi PTTimothy

  1. what operating system is installed on the computer?

  2. you are the administrator of the computer?

  I suggest you to check and to provide us with the information about the installed operating system.

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  Step 1:

  You can open the administrator and verify if you can open Windows Easy Transfer correctly.

  You can even check if you face the same question in the user account different or new user account.  You can create a new user account on your computer, and then check.

  Create a new user account-
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  Step 2:

  An analysis of the SFC and audit-
  a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click Allow
  b. type the following command and press ENTER:
  sfc/scannow
  A message appears indicating that "the system scan will start. Be patient because the scan can take some time.
  c. If all files require a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue.
  d. If everything is correct you should, after the scan, see the following message "resource protection Windows not found any breach of integrity".
  e. once the scan is finished, close the command prompt window, restart the computer and check.

  Check the link below for further guidance on scan SFC - mentioned
  http://support.Microsoft.com/kb/929833

  I hope this helps.

• Failed to connect to remote sql server 2005

  It has problem connecting to remote sql server 2005 on the LAN (windows xp/windows 7). I had put firewall settings as don't port no 1433 for TCP/IP and everything, but does not connect with the computer on the local network

  Hello
   
  Note that your computer is under domain, you must contact the technet forum, where we are the support technicians who are well equipped with knowledge on the issues of domain, do please visit the link provided below.
   
  http://social.technet.Microsoft.com/forums/en-us/category/SQLServer/

• Network connection does not work after reinstalling Windows XP.

  Original title: problems with reinstalling XP.

  I had re format and re install windows xp but now my network connection does not work.  I have no IP address, even if my router and the pc are on DHCP. Device Manager tells me that the controller Ethrnet on the motherboard has no drivers, but I can't find a driver.  Any thoughts appreciated.

  Hi John Fisher_888,.

  You can download & install the drivers for the adapter from this link & check if it helps

  http://support.Dell.com/support/downloads/devices.aspx?c=us&l=en&s=Gen&SystemID=DIM_PNT_P4_8400&OS=WW1&OSL=en

  Hope the helps of information.
  Please post back and we do know.