MCE IR remote stops working when connected via Remote Desktop Win7

Similar Questions

• D1370 "Scan type not the Remote Scan value... "Why this error when connected via USB

  Printer D1370 MF w / usb on win7 x 64 machine connection.

  I understand that when networked, I owe to the printer and manually press , then then before you scan using the software MF Toolbox on my PC and then must go to the printer once the scan is complete and cancel this setting manually before I can print or use other functions. What is total pain BTW...

  However, I also have a MF6530 and can scan directly from MF Toolbox without manually change the setting of the printer when connected via USB.

  So, I would like to connect one of my PC via USB for scanning to eliminate the requirement to manually configure the printer for the mode. But, when I do this I always get the error "type of analysis is not defined for [Remote scanner] on the device" even though I am connected via usb.

  1. I do something wrong when I try to scan via a usb connection that causes the error "remote scanner?

  2. that this has something to do with D1370 being a network printer. My MF6530 isn't a network printer.

  3 is there a manual for the software MF Toolbox? The manual on the installation disc is for 'Send email' and 'Store to Shared Folder. The manuals provided in the box do not address MF Toolbox. There must be a detailed operating manual provided by Canon for this program?

  4. What is the error Code 162,0,0?

  5. where is the complete list of the error codes for MF Toolbox.

  6 help!

  Hi monza.

  I know that this issue is frustrating and I'll be happy to help you.

  The new imageCLASS machines are designed so that you can select an option to scan the machine.  There is no way to set a default scan on this computer option.  You will need to select [Remote scanner] or [computer].  This is to ensure that your device correctly handles the scan project.  For this reason, the ability to program a specific mode is not available.

  Although an extra step to make, an advantage to choose the mode desired for a respective scanning can ensure that poor communication of scanner does not occur if it was programmed to a different mode.

  The 162,0,0, the error indicates the Toolbox does not detect the scanner mode "Remote Scanner.  Scanning is not supported with a connection on the USB hub, as the hubs can cause communication problems, trying to transmit data to the computer.  We recommend a direct connect between the printer and the computer.  Once you have connected the printer directly, perform the following steps and check if you receive the same error 162,0,0:

  1. Check that the MF Toolbox is closed on the computer and press the [SCAN] button on the printer.
  2. Select [Remote scanner], then press [OK].  The display reads, "remote scanner. Waiting in line... ».
  3. On the computer, open the MF Toolbox and select [PDF].
  4. Click the [START] button green on the window [PDF].  The machine begins to deal with the scan.

  Then I recommend to download and install the e-manual for the device to your computer.  It gives very detailed instructions on each of the functions of the machine.  The e-manual should be included in the manual on CD-ROM supplied with the machine.  If you are unable to access it from there, please click the link below to download the electronic Handbook:

  imageCLASS D1370 - Brochures & manuals

  I hope this information is useful for you.  However, if you need more assistance, please contact us at 1-800-OK-CANON (1-800-652-2666).

• Internet has stopped working when it is connected to the Cisco VPN

  Hello

  I configured IPSec (Ikev1) WHAT VPN remote access in ASA 5520, VPN connects correctly and I am able to access all internal resources but Internet does not work when connected to the VPN. I studied on it and found the problem with the default gateway, I'm ddefault duringVPN gateway connection. I'm surprised in ASA, there is no default gateway configured for the pool of IP VPN remote and remote clients then how can get a default gateway.

  I describe my problem below using image in shootout gave it.

  Thanks in advanve.

  

  Hi Mukesh,

  Until you specify command below according to your group policy, you will get the default gateway assigned by ASA to the user of your vpn. Please update your config strategy & group of tunnel

  Group XYZ policy attributes

  Split-tunnel-policy tunnelspecified
  Split-tunnel-network-list value split tunnel

  tunnel of splitting allowed access list standard 172.16.1.0 255.255.255.0

  For anyconnect with split tunnel use below URL help

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a0080975e83.shtml

  ASA/PIX: Allow the tunneling split for the VPN Clients on the example of Configuration of ASA

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a0080702999.shtml

  
  

  HTH

  Concerning
  Santhosh silou

• Portege Z830-10F - WLAN stops working when USB3.0 port is in use

  Hello

  On my Portege Z830-10F wireless stops working when I plug in a device on the USB 3 port. The wireless connection back upwards as soon as I remove the device.

  The problem occurs with any device I plug. I tested with disks external usb (usb 2 and usb 3), USB, a receiver wireless mouse and a printer/scanner.

  This problem only occurs when something is connected to the USB 3 port. The USB 2 ports on the rear do not have the problem.

  Port USB 3 itself works very well.

  Running windows 8 pro:
  * Wireless lan adapter: Qualcomm Atheros AR9200WB-1NG (version 10.0.0.75 driver)
  * USB port 3: Renesas USB 3.0 eXtensible Host Controller - 0096 (version 6.2.9200.16420 driver)

  I see that I ve got the latest drivers installed on the wireless LAN card and the usb host controller 3.

  The problem arises as well on windows 7 and windows 8 pro. I used the wizard to upgrade Toshiba upgrade of windows 7 to windows 8.

  This problem is present since I got this laptop. I ve already done a reinstall / recovery back to the original with windows configuration 7 but this doesn´t solve the problem.

  Does anyone else have this problem?

  Is there a way to fix this?

  Thank you!

  Hello

  To be honest, it's the first time I read on this issue.
  I have no idea how a device attached to the USB 3.0 port could affect the Wlan functionality.

  I assume its hardware fault and cela must be verified by a certified maker Toshiba.

• Tecra S5 - fingerprint logon stopped working when I chanaged password

  I have a laptop Toshiba Tecra S5 and I use logon of fingerprints from the beginning.

  It stopped working when I have chanaged my password.
  Fingerprints are associated with the old password.

  I looked everywhere to find where to change it without success.

  Can someone point me in a right direction?

  Thanx

  Hello

  I think you should remove the old prints and need to configure this new.
  As far as I know, you can use the new password to connect.
  Then access the setting of Trusuite software, remove old prints and reconfigure using new digital prints.

  Theoretically, this should work.

• SE error message "Windows Explorer has stopped working" when you click on network and sharing Center

  Original title: Windows Explorer has stopped working when I click on network and sharing and also...

  Hello technical savvy people!

  Windows Explorer stops working when I click on network and sharing, and also when I click on system.

  -Otherwise, I rarely get this little automatic.
  But when I do she translates these windows endangered; and then I can't find my connection to the local network, or my IP address,
  nor know how my system!

  Can you suggest healings?
  Thank you for your attention,
  marlem388

  Hello

  Were there any changes (hardware or software) to the computer before the show?

  Perform the steps from the link below and see if it helps.

  Error: Windows Explorer has stopped working

  Hope this information helps.

• Why loadvars stop working when I gave him the field?

  Maybe you can understand this one.
  
  When I specify the full url to load vars, including field it stops working when I put the SWF on the server. However if I load the SWF locally it loads the page from the remote server. I find that I must take the domain of the server of the argument to make it work on the server, as follows:
  
  
  var sendVars = new LoadVars();
  
  var result: LoadVars = new LoadVars();
  result.onLoad = function(success:Boolean)
  {
  _root.dataStr = Success +""+ result;
  }
  
  It works when I load the SWF file on my local computer, but not when I put it on my web server:
  sendVars.sendAndLoad (" http://myserver.com/myFile", is translated, "POST");
  
  works when I put it on the web server, but not when the SWF file is local (of course):
  sendVars.sendAndLoad ("myFile", result, "POST");
  
  
  No idea what I am doing wrong?

  Turn off must be a "crossdomain.xml" on your server file to allow access to the files of other sovereign wealth funds. For example:

  http://www.Flash-MX.com/crossdomain.XML

  Contains:

  
  
  
  

  It is clear to me why this is never mentioned in the docs of loadvars.

• my iphone 5 c screen stops working when I remove the case

  my iphone 5 c screen stops working when I remove the case

  Delete this case? Please explain what you ask a little more clear.

• MacBook pro stolen the question, 'Find my mac' still works to erase personal information if I put it before changing the icloud/itunes account password?  or is my phone app stop working when I change the password?

  MacBook pro stolen the question, 'Find my mac' app still works to erase personal information if I put it before changing the icloud/itunes account password?  or is my mac app stop working when I change the password?

  Unless you fully active 'find my Mac' BEFORE that your mac has been stolen, it can't do anything for you now. It is not active, and there is no way to make it active after the fact.

• Explorer Windows has stopped working when you click FLVfile

  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  Explorer Windows has stopped working when you click FLVfile / video clip downloaded by REALPLAYER

  Hello

  What version of the windows operating system is installed in the computer?

  I suggest you to see link and check. (That applies to windows vista and windows 7)?

  Error: Windows Explorer has stopped working

  http://support.Microsoft.com/kb/2694911

  Note: After checking in the clean boot, follow step: 7 article to reset your computer to normal startup.

  Note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process.

• My lbp6000 has stopped working when I upgraded to osx 9 mavericks. How can I get it back?

  My lbp6000 has stopped working when I upgraded to osx 9 mavericks.  How can I get it back?

  Hi gkharris!

  I know that this issue is frustrating.  I'll be happy to help you.

  When upgrading to new operating systems, we recommend that you uninstall and reinstall the drivers.  Please uninstall the printer by following the instructions in the article:

  Uninstalling the printer driver (CAPT V3.55)

  After uninstalling the driver, please download the latest driver on the Canon USA site.  Please click the link below:

  http://USA.Canon.com/Cusa/support/consumer

  Once you are on the site, enter your model number.  Your operating system will be detected automatically.  Click on the word 'Pilot', and then select The CAPT Printer Driver Ver.3.65 and save the file. Then, open it from the save location and install the driver package.

  Finally, save the printer in the print queue by following the instructions in the following article:

  Registration of the printer with USB (Mac OS X Lion) ( CAPT LBP Series Driver3.36)

  * Although it shows OS X Lion, the instructions are the same.

  I hope this information is useful for you.  If you need assistance, please contact us at 1-800-OK-CANON (1-800-652-2666).

• Windows Movie Maker 6.0 Vista immediately stops working when you try to open.

  Hello!

  I've been all around the internet trying to solve this problem, but nothing has worked so far.  When I try to start Windows Movie Maker 6.0 for Vista, (in general), it stops working at their opening saying the following:

  "Windows Movie Maker has stopped working".

  There has been a few times when it actually opens and I can work on my videos, however, it's very, very, rare and seems to happen randomly.

  I tried to open in safe mode, but it still fails to open.  I also tried to open .avi short and simple with WMM 6.0 files to see if it will be open, but that, generally, does not either.

  Once, I was able to open random and I have disabled all the filters on the Compatibility tab and temporarily activated only video filters that I needed.  That seemed to fix the problem for several days, and I could open Movie Maker 6.0 several times.  Sometimes it would freeze everything and save, or stop working when importing video files, but at least it would be open.  I was able to record some videos.  After a few days, my computer day and WMM 6.0 is more open more.  I don't know if yes or no update is the reason why Movie Maker 6.0 started crashing again, but it was the only thing that has changed on my computer while I could uncheck the Compatibility tab filters and open WMM 6.0. [Could uncheck all filters to be part of the problem?]

  I usually works with .mov files, and I read on how this type of file sometimes causes problems with Windows Movie Maker.  However, the problem normally occurs when I try to open the program (and if WMM opens, I can very well change .mov files).  I do not think that the file type is causing the crash, but I guess that's always a possibility...

  I also read that sometimes Windows Movie Maker 6.0 for vista doesn't work with all computers that have vista installed, and Windows Movie Maker 2.6 must be used to place.  Windows Movie Maker 2.6 is working fine on my computer, but it cannot change the .mov files, or record in HD.  I had horribly degrading the quality of the video with the conversions of files to use WMM 2.6.  Windows Movie Maker 6.0 is much better, on the rare occasions that it works.  Do you think I should use Windows Movie Maker 2.6 now?

  Here are two problem reports that appear more often when you try to open Windows Movie maker 6.0.  The window of support almost always said I need to update my computer again (even if there is no new update), or that it is a problem of security Data Execution Prevention.  Windows Movie Maker cannot be added to the list of exceptions to Data Execution Prevention, or I can check to see if the filters from the Compatibility tab are always disabled in the program, I don't know how to solve this problem...

  -----------------------------------------------------------------

  Signature of the problem
  Problem event name: BEX
  Application name: MOVIEMK.exe
  Application version: 6.0.6001.18341
  Application timestamp: 4ad5c77d
  Fault Module name: StackHash_6f96
  Fault Module Version: 0.0.0.0
  Fault Module Timestamp: 00000000
  Exception offset: 0378415b
  Exception code: c0000005
  Exception data: 00000008
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 1033
  Additional information 1: 6f96
  More information 2: 39ee662180b2f2ed5cfc67e5914ae855
  Information additional 3:6366
  Additional information 4: 8328a225406b340b1b7b5f591aa5688c

  Additional information about the problem
  Bucket ID: 1197617492

  -----------------------------------------------------------------

  Signature of the problem
  Problem event name: APPCRASH
  Application name: MOVIEMK.exe
  Application version: 6.0.6001.18341
  Application timestamp: 4ad5c77d
  Fault Module name: StackHash_1703
  Fault Module Version: 0.0.0.0
  Fault Module Timestamp: 00000000
  Exception code: c0000005
  Exception offset: 032e41a4
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 1033
  Information additional 1:1703
  More information 2: 2264db07e74365624c50317d7b856ae9
  Information additional 3:1344
  Additional information 4: 875fa2ef9d2bdca96466e8af55d1ae6e

  Additional information about the problem
  Bucket ID: 1909412930

  -----------------------------------------------------------------

  The "BEX" error happens much more frequently than the "APPCRASH" error  In addition, I have Windows Vista home premium installed and a 32-bit operating system.  I don't know how to read the problem reports, or if it's all the information you need.  I'm not very good with computers at all the... Any help and ideas would be greatly appreciated!

  Thank you!

  Very often, but not always, Code exception: c0000005 is a permissions access error, so have you tried right-clicking on the MM shortcut or .exe and selecting the option "Run As Administrator"?  Other times a reinstallation of the program crash can fix.  As you can not do with Movie Maker the next best option is to try the System File Checker.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212/#appliesTo

  Have you tested another user even if you need to create one to do this?

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking.  Try first by checking do not each box (that it will run in read-only mode) to see if it reports any problems file or hard drive.  If so, restart it by checking both boxes and restart to allow him to attempt to fix any problems found.

  See how many unsigned drivers, you have running on your computer.  This article will guide you on the instructions, but all you need to do is type sigverif in start run.

  How to identify unsigned with sigverif utility in Windows Vista drivers
  http://www.WinVistaClub.com/F34.html

  Vista Movie Maker DEP Fix
  http://www.YouTube.com/watch?v=tkpURM4FFt0

  In the fix above which is sometimes, but not always with success, it is suggested to leave it on the AVI decompressor.

  There are a few suggestions that Nero is a problem if you run that at all?

  Windows Movie Maker has stopped working
  http://blog.SteveX.NET/2006/11/Windows-Movie-Maker-has-stopped-working/

  If a piece of software can crash Movie Maker may be other software can do, then try Movie Maker in a clean environment, without other software running.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  http://www.Google.com/search?q=Movie+Maker+DEP+Vista&RLS=com.Microsoft:-AU & ie = UTF-8 & oe = UTF-8 & startIndex = & startPage = 1

• My windows Explorer stops working when I try to use the file menu on a file.

  My windows Explorer stops working when I try to use the file menu on a file. If a file is selected in a folder that windows Explorer will be display Windows Explorer has stopped working the message box. This occurs only if a file is already selected and you click on the file option in the menu bar. All the other menu items work well if a file is selected or not, and if no file is selected the menu file works fine. I already ran SFC/scannow from the command prompt, but it returns no violation.

  Hello

  Thanks for posting your question in the Microsoft community forum!

  I understand that you are having problems with Windows Explorer. I'll help you solve the problem. To be able to understand the question in a better way, I would like to ask you a few questions.

  (1) did you make any changes before the show?

  (2) how often does the problem occur?

  Method 1:

  Step 1: You can check if the same problem occurs in safe mode.

  Please follow the link on how to start the computer in SafeMode below.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: Perform a clean boot.

  Put your boot system helps determine if third-party applications or startup items are causing the problem.

  How to set up Windows 7 to start in a "clean boot" State

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  See also:

  Error: Windows Explorer has stopped working

  http://support.Microsoft.com/kb/2694911

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Note: Choose a date before that the problem occurred as your restore point while performing a system restore.

  WARNING: Perform a restore of the system can change your settings and delete your unsaved data. Do it at your own discretion.

  Please let me know the status of the issue. I will be happy to provide you with the additional options that you can use to get the problem resolved in Microsoft Windows.

• Driver.exe has stopped working when you try to play Driver.San Francisco.

  I get the message DRIVER. EXE. Haven't STOPPED WORKING, when I try to play the game, Driver.San Francisco on my computer. Windows 7

  Hello

  1. what game do you play?

  2. have you made any changes to the computer?

  3. this problem occurs only with the particular game?

  4. What is the exact error message you received?

  Method 1:

  I suggest you perform the clean boot and check.

  Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, make sure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I suggest you to see link and check.

  "Display driver stopped responding and has recovered" error in Windows 7 or Windows Vista

  http://support.Microsoft.com/kb/2665946

  See also:

  If the problem is related to Microsoft, I suggest you to see link and check.

  Game hangs or quits unexpectedly

  http://support.Microsoft.com/kb/303032

• Windows Explorer stops working when USB drive is ejected

  Hi all

  I'm having a problem with the windows Explorer. When you eject a USB device, windows Explorer stops working and must restart. It also stops working when trying to get the properties of the USB device. I watched "Event Viewer" and there is an error log that says this:

  The failing application name: Explorer.EXE, version: 6.1.7601.17567, time stamp: 0x4d672ee4
  Name of the failed module: SHLWAPI.dll, version: 6.1.7601.17514, time stamp: 0x4ce7c9ab
  Exception code: 0xc0000005
  Offset: 0x000000000000ae81
  ID of the process failed: 0xa3c
  Start time of application vulnerabilities: 0x01cd974c8a303440
  The failing application path: C:\Windows\Explorer.EXE
  Path of the failing module: C:\Windows\system32\SHLWAPI.dll
  Report ID: 0d06c054-0346-11e2-ad84-00248c7a3b78

  Now, I had this problem on my home computer and tried to replace the file SHLWAPI.dll with whom I had the internet, but it bugged my computer and had to re - install windows. Now, this computer works fine. I would get a solution to what keeps all my files and programs since to reinstall all my programs and backup my files on my computer to school will be a big hassle.

  Thank you
  Riley S

  Hello

  Were there any changes made to the computer before the show?

  Please follow the steps in the link.

  Error: Windows Explorer has stopped working

  http://support.Microsoft.com/kb/2694911

  Also visit the web site of the manufacturer of the computer support and search for Windows 7 drivers for your specific model number. If you have Windows 7 drivers then download to a folder on your hard drive and install them all, starting with the drivers card mother/chipset, SATA, USB, Audio, LAN, etc.