EBS Dataguard

Similar Questions

• Oracle EBS Dataguard

  Hello
  
  Published by: user7239280 on April 25, 2011 11:46

  With the difference above can we move forward in the implementation of dataguard?

  Even if your configuration is supported, it is always recommended that you have the same hardware configuration for the primary and the basic data Eve - please log an SR to confirm this with the support of the Oracle.

  Thank you
  Hussein

• EBS 11i Dataguard Setup

  Hi all

  EBS 11i

  9i

  RHEL5

  There is a special process for the physical database of EBS to standby dataguard configuration?

  I was able to configure the physical standby for its database, but if you try to shift from the primary to the standby mode, the standby cannot log command.

  Help, please...

  Thank you very much

  JC

  Hi all

  I solved my problem now. I'm just being dumb of me

  In the init.ora, I see that there comment #.

  #log_archive_start = true

  Since it's the eve before db, it did not matter if its commented out.

  But when I switch to it, now, the question to which it can not automatically archive the online redo, it is why ALTER SYSTEM SWITCH LOGFILE wait forever

  Thank you ALL.

• With dataguard EBS can be cloned?

  Hi all

  EBS 11i

  OEL 5

  I'm dataguard configuration to our ebs.

  I noticed init.ora added new parameters like:

  db_name = PROD

  instance_name = PROD

  fal_client = PROD

  fal_server = STANDBY

  Log_archive_dest_1 = 'LOCATION=/p01/app/oracle/product/9.0.1/dbs/arch. '

  LOG_ARCHIVE_DEST_2 = "SERVICE = STANDBY LGWR ASYNC NOAFFIRM'"

  log_archive_format = %t_%s.dbf

  log_archive_start = true

  Remote_login_passwordfile = EXCLUSIVE lock

  service_name = PROD

  What happens if I cloned our PROD to the TEST instance? The new shell settings?

  Thank you very much

  JC

  Yes because you cannot configure the data with the same target environment guard env set up with your production environment (source).

  Thank you

  Hussein

• EBS R12 dataguard physical standby

  Hi all

  BSE R12.2.4

  RHEL 6

  Most of the physical standby of companies used to be opened read only for reports.

  It comes to unload part of the load of PROD for better performance.

  Most of the reporting tools are 3rd party like Jasper, Crystal, Java, .net, Apex, Toad, Sqldev, etc.

  My question is can a simultaneous Manager EBS reports can execute on a database read-only?

  Thank you very much

  JC

  Also

  Using Active Data Guard and discoverer of generation of Oracle E-Business Suite release 12.1 reports and a database in Oracle 11 g or 12 c pending physical (Doc ID 1070491.1)

  Using Active Data Guard of generation of Oracle E-Business Suite 12.2 version reports and databases Oracle 11 g (Doc ID 1944539.1)

• DataGuard EBS of CARS with NO CARS

  Hi all

  We are planing to set up Data Guard of EBS 12.1.3 the cars to CARS NOT associated with the Application,

  Environment:

  EBS: 12.1.3

  Cluster: 11.2.0.3

  DB: 11.2.0.3

  Configured, CFP

  Shared applications

  Please help me,

  Kind regards

  A.Khan

  Select dest_id, STATUS, database_mode, recovery_mode, archived_seq #, error, gap_status from v$ archive_dest_status;

  DEST_ID STATUS DATABASE_MODE RECOVERY_MODE ARCHIVED_SEQ # ERROR GAP_STATUS

  ---------- --------- --------------- ----------------------- ------------- ----------------------------------------------------------------- ------------------------

  1 VALID OPEN IDLE 806

  2 OFF IDLE UNKNOWN 0 ORA-12154: TNS: could not resolve the connect identifier specified

• Using Dataguard Oracle 10 g with Oracle EBS

  Hello
  
  I work on Linux with Oracle Database 10g and Oracle EBS R12 and try to configure Oracle Data Guard with Oracle EBS. I read My Oracle support Document (Business Continuity for Oracle E-Business release 12 using Oracle 11 g Physical Standby Database [1070033.1 ID]).
  
  Please let me know of any other useful document. It will also help if anyone could share experiences in real time.
  
  Thank you.

  Hello

  See this one

  Continuity of Oracle Applications Release 12 on exit 10 gr 2 - Single Instance database and RAC [ID 452056.1]

  Concerning
  SANAE

• Dataguard active with EBS 11i

  We exposed customer for Active data guard with EBS 11i, is this certificate with EBS 11i...?
  
  
  Please let me know some more information.

  Active data guard with EBS 11i, is certified with EBS 11i...?

  Yes, its certified with 11i applications.

  Check out the blog of chan steven for more information regarding:

  http://blogs.Oracle.com/stevenChan/2008/10/comparing_oracle_data_guard_vs_active_data_guard_f.html
  http://blogs.Oracle.com/stevenChan/2010/03/oracle_data_guard_11g_ebs.html

  Business Continuity for Oracle E-Business version 11i with Oracle 11g physical Standby Database - Single Instance and Oracle RAC [ID 1068913.1]

  Published by: Amigo on December 28, 2010 07:31

• Active data guard for EBS

  Hi all

  EBS r12.2.4

  rhel6.5

  Active Dataguard applies in ebs?

  It is available in 11.1 or 11.2 only and up to?

  Thank you very much.

  JC

  Hello JC,.

  See the following blog: https://blogs.oracle.com/stevenChan/entry/oracle_active_data_guard_111

  See also ""E-Business Suite Oracle Active Data Guard Certifications ". "

  Coco - M

• Ifiles DataGuard

  Hi all

  EBS 11i

  9i

  RHEL5

  I'm configuration dataguard for ebs 11i with Doc 216212.1

  
  

  In Section 3: physical Standby Ridge - point 2: configuration Oracle Net communications to and from the standby.

  
  

  The task is to create a <CONTEXT_NAME>_ifile.ora .   and listener_ifile.ora.

  
  

  These files are required?  I check from its parent listener.ora and tnsnames.ora files and I see that thay are just redundant?

  Their content also exist in the parent file?

  Please enlighten if I need these files.

  Thank you very much

  JC

  
  

  Hello

  Because they are many DBA worldwide and with different standard environment maintained (custom) for them, so in order to solve the complexity (or instead of change/complicate things), they give flexibility as inputs plug-in and plug-out to file (with ifile as subset). So that they can add or just throw will be a comment in tnsnames.ora based switch above and switch back.

  -Pavan Kumar N

• EBS high availability VS. Continuity

  Hi all

  I'm confused about high availability and business continuity.

  They are the same or similar?

  Assuming I have cluster tier1 Apps and Apps-teir2 installation on the same instance.

  If Apps-teir1 fails, users assigned to that transferred to Apps - level 2 will be and vice versa?

  If they do fail-overed in another layer Apps, what do you call this kind of configuration?

  Is - this high availability and business continuity? or other type of installation available in EBS?

  How about the Site configuration after disaster with dataguard standby server.

  If the PROD fails, it will automatically transfer to the Site of recovery with dataguard. Can it be called high-availability as well?

  Kindly enlighten please...

  Thank you very much

  JC

  For your type of installation, it will work, but you have to take care now

  1.) as DB side is supported by the installer of dataguard, phase applications file system, you will need to find ways to transfer files on Server2. Maybe you can use Rsync.

  2.) failure to PROD you convert DB mode ensures prod.

  3.) next to the application, you will need to run the combination adcfgclone/autoconfig (what URL you want to have Dr. Côté, CM Setup etc.)

  Please be aware that in the case of installation Ebiz DR there will always a downtime (you can reduce to a minimum the same but can't avoid it)

  concerning

  Pravin

• EBS Apps control Questions?

  Hi all

  I take a few dump exam for master guru of ebs apps?

  Can you check if my answer is good or better or the best?

  Questions.

  1. how it swings (increased capacity) and scalable how can it go?

  All the possible ways.you can add several servers/machines or more of memory, CPU, disks, etc., by server.machine

  2 database, supported programming platforms and access tools.

  All (java, .net, etc.)

  3 operating systems supported.

  All (for example, unix, windows, etc.)

  4 cycle upgrade software (frequency, methods in application and database)

  All (for example you can do it every year, or every month or every 5 years, etc.)

  5. the User Interface (via web, via client software)

  All is supported (web & cleint, etc.).

  6. Security and Audit features (handling and ease of management)

  A lot of safety features and provided, internal and external audit (audit of Db, Db Vault, network, etc.)

  7. backup and recovery

  Backup and restore features are in place and tested (RMAN, Dataguard, etc.)
  

  8. user query and reporting tools

  There are a lot of built-in avaiable time tools and 3rd parties (ConcurrentManagers, BI, Hyperion, Excel4apps, etc.)

  Please check if my answers will be passing in your standards of knowledge.

  Can also help you improve the answer or what is the best response?

  Thank you very much

  JC

  I hope that "User Interfaces" refers to where the user can input/display the application.

  If this is the case of User Interfaces are OFA, form of Oracle and Web ADI form.

  In R12.2.4 there are other changes in the page as a complement to the pane in the homepage above.

  Reference: https://blogs.oracle.com/stevenChan/entry/usability_improvements_in_release_12

• Provide this number DataGuard documents.

  Hello

  We use the EBS 11i with database 10g R2 on 32-bit Linux.

  Please give me the number of the document to create physical dataguard for above envoirnment.

  Please also provide the document possibly on creating physics dataguard 10g R2 with 11g R2.

  Concerning

  Hello

  N ° you can't.

  Please see:

  https://forums.Oracle.com/thread/1007348

  Hope this helps

  Best regards

• R12 with dataguard

  Salvation;
  
  I need advice on an issue.
  
  I have 2 instance working on VMware and am available for r12.0.4 on RHEL4 dataguard in following:
  Continuity of Oracle Applications Release 12 on exit 10 gr 2 - Single Instance database and RAC [ID 452056.1]
  
  The two server has the same SID,
  different db_unique_name,
  Users and the EBS installation path are same
  valid information IP and hostname in/etc/hosts
  tnsping knit both primary and standby
  
  The problem is archiving log doesn't send primary eve. DB primary while I run
  SQL > alter system archive log current;
  
  I have this in the error log:
  
  Beginning log switch checkpoint up to RBA [0x12.2.10], RCS: 9659887190524
  Thread 1 Advanced to record the sequence 18
  Currently Journal # 3 seq # 18 mem # 0: /u01/VIS/db/apps_st/data/log3.dbf
  Fri Jun 4 23:59:11 2010
  Additional checkpoint up to RBA to RBA [0x12.8.0] [0x11.1520.0], current journal line
  Fri Jun 4 23:59:43 2010
  Logging of errors 12545 has received on the standby+.
  Remove the new logging of errors LOG_ARCHIVE_DEST_2. +
  
  
  SQL > select status, dest_id, error from v$ archive_dest_status returns:
  
  DEST_ID ERROR STATUS
  --------- ---------- -----------------------------------------------------------------
  VALID 1
  2 of ERROR ORA-12545: Connect failed because target host or object does not exist
  INACTIVE 3
  4 INACTIVE
  5 INACTIVE
  6 INACTIVE
  7 INACTIVE
  8 INACTIVE
  9 INACTIVE
  
  DEST_ID ERROR STATUS
  --------- ---------- -----------------------------------------------------------------
  10 INACTIVE
  
  10 selected lines.
  
  
  I checked LOG_ARCHIVE_DEST_2 and good sound.
  I can use TNSPING wihtout problem (using "" < nom_du_contexte >ifile.ora ' under the $TNSdirectory ADMIN ")
  
  Server mutually can ping with the IP address or host name.
  
  Any who face a similar question before?
  
  Respect of
  HELIOS

  Helios,

  What is the value of the parameter 'log_archive_dest_state_2 '?

  Thank you
  Hussein

• Physical backup of oracle dataguard.

  Hello
  
  What is the way to dough to make the backup of the node of Oracle 10 g (10.2.0.3) Physics of the standby database.
  We have EBS r12 (12.0.6) and database (10.2.0.3). And already, we take the backup of the application (r12) and primary database nodes
  with the help of way cold backup.
  
  So, can I take the cold physical database backup ensures, by just judgment of recovery paused node, then stop the start node and then resumes cold?
  
  
  Thanks.

  Hello

  What is the way to dough to make the backup of the node of Oracle 10 g (10.2.0.3) Physics of the standby database.
  We have EBS r12 (12.0.6) and database (10.2.0.3). And already, we take the backup of the application (r12) and primary database nodes
  with the help of way cold backup.

  It is recommended to use RMAN for your production database backup (see books below).

  So, can I take the cold physical database backup ensures, by just judgment of recovery paused node, then stop the start node and then resumes cold?

  Yes, or use RMAN as suggested above.

  Note: 848716.1 - use RMAN efficiently in an environment of Dataguard
  Note: 602299.1 - benefits and the use of RMAN with data pending

  Backup & recovery manuals
  http://www.Oracle.com/technology/documentation/database10gr2.html

  Kind regards
  Hussein