Eccentric spring hills and FPS

Similar Questions

• Qosmio F60 - overheating and FPS fall games

  Hello

  My Qosmio F60 gets very warm, while gaming and idling, for example, while the cores of game and GPU work around until 75-85Celsius, I don't know how they are idle, but my pumps STILL hot air fan, comparing to all portable computers friends, they don't pump hot heat games unless.

  Also while gaming, I get drops FPS while playing, even though I used to run a game on high 60 fps, without drops, now it's on low-head up to about 6 times.

  Help, please.
  Thank you, Harrison

  Hello

  Sorry but here a few questions to better understand:
  Are you using the original Toshiba preinstalled the operating system or your own version?
  Toshiba display driver you are using.

  While gaming laptop is placed on the desk?
  All vents are free?
  Do you use new games?

  Plan to use everything at stake?
  Do you use the maximum level on the graphics settings in the game?

  Have you tried playing with the power and graphics settings to see if the result will be a little better?

• Why is there a difference in length between 24 fps and fps 23 976 timelines with the same clip?

  I was working on a project of 23 976 fps and I tried to import a short animated sequence of 44 TIFFs in my scenario in my first CS5.

  I imported the sequence, interpreting the film at 23 976 fps (such as it was made in AE) to check before sending it to a finished House.

  First issue. Even if I set the framerate 23 976, first CS5, indicates me 23.98 on interpreting window film. I assumed it as a rounded number.

  When I drag the attachment to my 23 976 sequence, the clip shows 43 (!) length of frames on the info panel. It lacks an image. The sequence in the original video, it really lacks a framework.

  I decided to do a test. And placed the same clip, interpreted the same way on a sequence of 24 frames per second, and the clip shows as length of 44 executives on the info panel.

  How can we, same clip shows the different quantity of frames (I don't mean time, but just raw images), on different times? It makes no sense at all! If my sequence has 44 frames, it should show in the form of 44 independent frames of the scenario that I imported it. Am I entitled?

  Just for test, I ve imported from the same sequence on AE, and in it shows as 44 frames on a timeline 23 976. How can I trust to first frame interpret in this way?

  Just one thing. The scene used as basis for the animation of the AE, has 44 executives, and it was measured and cut in a 30s film on the same first which is having this weird behavior.

  Can someone explain to me what Just happened? It s driving me crazy!

  Thanks in advance

  Mauricio Mendes

  Before you import the sequence of images, go to Edit > Preferences > media... and together the basis of split time at 23.976.

• Mole Hill, and MXML

  Has anyone tried making a molehill flex project?

  I use Away3D4, and I can get the swf to run very well if it is an AS3 project.

  When I try to run it as a flex project, it does not display the 3D content. I get no errors from the compiler or runtime... so I think it's just the spark SpriteVisualElement is unable to render 3D molehill content.

  There must be a way around this!

  I'm sure that molehill draws 'behind' the application, like video scene.  He

  It is really not on the display list.  In mx:Application, backgroundAlpha = 0 is

  probably a reasonable thing.  In Spark, I believe you must customize the

  skin not to draw a background.

• Suite of spring and vSphere Client Web plugins

  Hi, I'm new to this environment.  I'm developing VMware vSphere Client Web plugins.  Installing vSphere Web Client plugins, it is stated that favorite tools include Suite of spring, which is a derivative of the eclipse.  It is an optional component to use the tool, FlashBuilder.  Eventually, the VMware documentation states that you can use Eclipse instead of the spring tool Suite, but different configuration is necessary.

  I write here (instead of VMware/AST) for the following reasons.  I am able to set up the environment without the tool, FlashBuilder.  I am able to develop plugins Web Client without the tool, FlashBuilder.  However, I believe that the FlashBuilder tool will facilitate the development.  When I try to get the FlashBuilder to load, I get no longer things to work; I can't develop plugins Web Client.  Finally, the FlashBuilder tool is the only piece of the puzzle that is a licensed product, and therefore, I won't be able to buy the product if I can't get the trial version to work.

  FlashBuilder has an installer of plugin for Eclipse.  I tried to install the plugin following spring tools, and I tried to install the plugin in a regular version of the eclipse.  In both cases, the problem I encounter is that I cannot locate VMware files and does not have the Virgin service which is present when I didn't have the plugin installed FlashBuilder.

  Someone has no experience or knowledge in FlashBuilder getting to work in this type of installation?  Clearly, it's doable, but using all the documents that I can find online, I can't FlashBuilder work in my environment.

  Thanks for any help or suggestion you may have.

  You should post questions Flash Builder Flash Builder Forum.

  http://forums.Adobe.com/community/flash_builder?view=discussions

• Why my iphone is springing forward

  My iphone guard spring forward, and we don't change our clocks until Sunday. It even has something to do with the period of change? I know there have been times change bugs in the past. Ive turned my phone market, and the time is OK, but then the front Springs again. This has even happened to someone else? How can I fix it?

  Thank you!

  There he put to set the time automatically, then your carrier has "taken the lead". The phone Gets the time from the default cell towers. That would be a problem with the cellular network was until the GMT offset.

• How to remove and replace the missing keys Sat A30

  Hey folk,
  I guess that sounds simple, but I have just no idea.
  Broke and need to replace a couple of keys on my keyboard UK A30. At present, all what I have in place are the rubber bubble popper & locators of metal set in the empty spaces.
  The keys in question are the shift (I have no u lying in spring form) and? + / keys of RHS of KB.

  I have complete German and American replacement KBs, but to remove the necessary keys on the part and repair the United Kingdom KB.

  I don't want to end up with 3 broken KBs

  So I need clear and detailed instructions on removal and then reset the necessary keys.

  Any help or direction to the site that contains this kind of info would be greatly appreciated. Or response message directly by email to

  [email protected]

  Thank you very much.
  sparkiefive

  Hello

  I think you should go to a Toshiba Service partner.

  You can find them here:
  https://EU.computers.Toshiba-Europe.com
  Downloads support & - find an approved service

• M30-832: Questions about memory and DVD player

  Hi all, new to laptops up to have a few questions! First of all, I have a Satellite M30-832.
  1. He has on the dvd player on the side of the Compact disk with re-writable below image and sign dvd R/RW under. That means it is a DVD burner as well? It does not sem to recognize blank DVDs and I was under the impression that it should be possible to write about them!

  2. can I upgrade the memory with memory DDR - RAM modules or does take a special type? And how to change them!

  Thank you very much

  Hi Richard,

  From what I can find your M30 832 is equipped with a DVD burner so you should be able to burn DVDs (the specification says you can only burn at X 1 speed for DVDs).

  You should be able to update your RAM to a maximum of 2 GB and I recommend you buy a quality mark to avoid any problems. Your user manual should have details on how to change the RAM modules, but generally it will be to remove a panel of access (usually on the bottom of the unit) and then releasing it two clips (one on each side of the RAM modules) plastic spring-loaded and gently raising the output modules.

  Please make sure that you either wear a wristband anti-statuc dirt or this earth you yourself before accessing RAM modules. They are very sensitive to electrostatic.

  You can find suppliers of RAM suitable if you GOOGLE 'M30 832 RAM.

  HTH)

• Phone lock and fingerprints

  Hi all

  Lollipop phone lock, either by the hardware button or software used to unlock using the fingerprint sensor.

  But Marshmallow only pitcher results hardware button to release through fingerprint sensor.

  If I use the screen with software lock (for example double tap the gesture of the Nova Launcher or any screen large app) footprint unlocking does not work. It asks password pin code / model.

  I checked this on two units G4 bike most of my friends. Lenovo recently released also Marshmallow update for Note K4, which also has the same issue. However even worked very well on Lollipop 5.1 on note K4.

  Is this something to do with the marshmallow or something else... Can someone shed some light?

  Thank you

  Hello

  The application above options is just a workaround and that too in paid version solution. So as possible. I also got a confirmation of the Launcher Nova developer phones without root cannot tap double locking and FPS unlock.

  So in Stock Marshmallow no choice but to use the above, paid app for the workaround or use hardware key locking. Double tap is out of the question.

  K4 note got another built-in feature of the wide Touch. This works with FPS without problems.

• Help with Lenovo Z580 low fps...

  I have Lenovo Z580 with

  4 GB DDR3 1333 MHz
  I5 - 3210M
  NVIDIA GT 630M 1 GB DDR3
  HARD DRIVE 500 GB
  Windows 7 Home Basic

  So I think that my gpu (GT 630 M 1 GB DDR3) is the limitation because any game starts with fps... for example BFBC2 initially runs with 55 + FPS... but suddenly, after a few minutes, as after 30 minutes it gets very hot (80-90 degrees celsius) and fps drop near 35 fps... then I unplug the adapter then reconect and then I get high fps(50-60) for a few seconds and then a low fps... up to what the heck is the problem... I think that its limitation... any ways remedy?

  Well the fix was easy... I just openedd the front back and used my mouth to blow air on the fans... while maintaining it with scissors... and then I blew air through the holes to the van... a lot of dust came out and now no problem!

• Core of labview 8.5.1 installed DVD (PDS) and I have the full development on my system?

  Hello everyone,

  I do not understand this self of that happening. I had labview 8.5 full development install on my computer, but I have seen that this version of labview did not support the creation of executable.

  So I uninstalled this version to install LabVIEW 8.5.1 a DVD named or SITE LICENSE version ACADEMIC (spring 2008) and not the documentation provided sti ^ pule it as well of the professional development system version.

  Once you have installed this version, the computer offer me an activation already number that does not exist on my computer pour activate LabVIEW.

  I then run LabVIEW and I realize that the version I have installed is none other that the full version of system development.

  Y ' there something I forgot when installing?

  Good to you

  Edward

  English, c/o Google translation:

  Hi all

  I don't understand what is happening. LabVIEW 8.5 full development, I have installed on my computer, but I have seen that this version of LabVIEW does not support the creation of the executable file.

  So I uninstalled this version to install the LabVIEW 8.5.1 on a DVD named OR LICENSE SITE ACADEMIC (spring 2008) and that the documentation provided sti ^ pule is indeed the version professional development system.

  Once you have installed this version, it offers me a number of activation on my existing computer to activate LabVIEW.

  I run LabVIEW and then I realize that the version I have installed is different from the development of the full system.

  Is there something I forgot when installing?

  Sincerely,

  Full development edition does not include the Application Builder. It is explained in the LabVIEW product information. You can buy the Application Builder separately, or use the professional edition.

  You said that you have the professional edition on the DVD you have, if you have installed that. But you said that the version you have installed is 'different' in full. What do you mean by 'different '? Have you checked the LabVIEW development environment and the Application Builder have been activated? You can check by looking in the License Manager, OR (which is installed with the software).

• Problem of FPS VN7 - 791 G-77WX cooling problem

  Hello

  I have a VN7 - 791-G and I have a problem with it. When I start to play a game, the cooling fans is really strong, it begins to spin at very high speed and FPS is really low while the fans are so strong. For example the 'normal' it the condition works CS 120-130 FPS, fans work but not annoyingly loud and it is time when the fans are really really very strong and in the game, I have 20-30 FPS. I checked the temperatures.

  It is fans are really strong one I have 20-30 FPS

  

  It was then that it actually works as it should

  

  If I change the video games, nothing happens even in GTA V when I have this problem I have 10 to 20 FPS on Ultra setting and low setting too. Cooling Boost tried and did not help. Each driver is the most recent. Each game uses the 860M.

  Just got back my phone service, they said it was a failure of the motherboard, so they replaced.

• Installation of Service Pack 3 and (almost) catastrophic failure.

  After properly installing Service Pack 3 and restarted my computer, ALL I get on my screen is my beautiful background of hills and blue sky.  NOTHING else.  The only way I could get my messages (and get on this site) was to make Ctrl-Alt-Delete and then make a few clicks and as if by magic, I'm here.  I don't have no tray - clock, no quick launch item, no START.  No icons at all.  That's happened?

  More information? What you describe is a symptom of a malware infection.

  We don't know anything about your situation. In your next post, please let us know:
  -the make, model and model number of your PC
  -the reason for which you have installed SP3 (for example, you just complete a clean install after format?)
  -the status of malware from your PC (if you have malware, let us know what it was)
  Reset. If you see the same thing, try this combination of keys:
  CTRL + E
  Who must bring up Windows Explorer and CAN help.

• Keyboard and Microsoft mouse problem

  I just bought the 4000 wireless desktop and mouse and keyboard do not have a power button... How my batteries will last like that...?

  Well, you're probably a good price, as the (Laser) 4000 wireless office came out in spring 2007
  and is no longer available from Microsoft.  BTW, the datasheet for your product from Microsoft suggests the
  battery life for the keyboard and mouse is six months.

  May I suggest the Wireless Laser Desktop 7000?  It is rechargeable (and $129.95 MSRP)!
  It's the mouse has an on/off switch.

  BTW, the Wireless Mobile Mouse 4000 Microsoft has a switch...

• Report l / h different fps issues

  Hi, I just wrote and directed my first independent short film. I had a great team and got some pictures of the beautiful and very visual. But I am learning the editing more or less from scratch. I seek answers here and elsewhere for my question but have found none.

  So, because we shot images in different fps (24 fps and fps Slow Motion with a scarlet RED 70) it seems that when I import they find themselves with the different proportions and different width and height. I'm not sure how do faced with this, when I want to layer a few images with different plans have different shots within a single sequence. So my question is: is there a solution for this, which means, what sequence settings should I use or if I can't solve this problem, what images can I prioritize - will be the sequence settings affect the image quality much?

  Note: the different width and height/aspect ratio... Would it because we shot greater fps/Slow Motion in 2 k in order to get enough and the other images in 4 k? I'm really new to this, so my question may sound strange, but I'm trying to understand how it works.

  Also, I have some big plans I want to connect to. I tried to use the effect of "scale" to do this, but that also seems to change the aspect ratio. Or rather, the shrink of mailboxes when I use the scale effect, how to solve this?

  Last question. Due to a schedule very pressed the photographer accidentally got the fps to 25 (when it was supposed to be 24) because it has not changed the basic parameters of time unfortunately. But the record framerate is 24. I tried to interpret the film at 24 fps, and it works, audio syncing properly then. But is it the best way to deal with this?

  I thank you for your time and look forward to the answers.

  All the best,

  HA!

  You will need to check the proportions cadence between your 2 k and 4 k material. I know there are several possible iterations of each, and to my knowledge, the most common 4 k is the same proportion of 16:9 as 1080 or 'HD' stuff and some of the 2 k is the height of the frame itself but a more long-width chassis, make a more narrow part. A stat I saw was for a camera where the 2 k was essentially 2.18:1 or something close to that, a little narrower... more "big screen" next.

  Pace should not have any effect on the size of the image or the proportion.

  When you have mixed material proportion, you need set your sequence to your image-size/proportion of output desired, then add clips to him probably using "Set to frame size"... the scale-to option in fact t scale media at this size, so if you decide to say, zoom in a bit... you Pixelize quite easily. 'The value' will continue to have all the original size/resolution to make changes without affecting the quality of the image.

  Neil