EchoLink error-om 1 port is not availible use your push to talk button

Similar Questions

• Error for KB974674 "update is not applicable to your computer"

  Actual title: KB974674 installation problems

  I tried to install KB974674 on my new HP laptop under Windows 7 Home Premium to allow me to back up data from my old XP PC but got the message that the update is not applicable to your computer. Unlike others with this problem, the data are English to English. No reason for the message and how I can make my backup?

  Hello

  -What is the exact error that you receive when trying to install updates?
  -You are aware of any changes made on the computer before this problem?
   
  Method 1: I suggest trying to install the patch and also to try the steps mentioned in step 2 in the " WORKAROUND " section from the link mentioned below to check if the number perissts.
  Restore description of the backup of Windows NT to Windows 7 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/974674
   
  Method 2: Clean Boot Mode
  I suggest to keep the computer in clean boot mode and try to install the updates then check if the problem persists.
  A clean boot to check if startup item or services to third-party application is causing this issue.
  You can read the following article to configure the computer to boot:
  http://support.Microsoft.com/kb/929135
  Note: After the troubleshooting steps, see the link to start to set up the computer in normal clean startup mode.
   
  For reference:
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates
   
  Hope this information helps.

• Microsoft fix it solution center has begun Error Message: convenience store does not apply to your system

  The fix it solution has always worked before now. I can't even use the portable download when it finishes I get the error message. I am also the one who said it was not compatible with my current setup of the system. Please fix this for me.

  Hi Patricia,

  I suggest you to download the Windows Installer (. Windows6 0-KB942288-v2-x 86.msu) from the following Web site and check if it helps.

  Windows install 4.5 Redistributable
   

• Can not scan using my Photosmart 2610 Scan button on 10.6 Snow Leopard

  Hello

  Just to avoid any confusion, is not scanning the computer here (from previewing or HPScanPro). I refer to the scanning using the Scan button on my AiO printer.

  HPScanPro has stopped working for me when I installed 10.6.  What I've read, the solution is to scan to Preview.app.

  My problem is that when I press scan on the printer and select my computer in the list - and say then that I select "Tiff to Preview" in the list, it always launches HPScanPro which fails.

  This feature was important to me because I often have to scan lots of pages one after then the other.   Simply push the button on the scanner, then by changing the page and by pressing on the button again allows me my scan in batches and worry then save all files at once thereafter.  This is a great time saver.

  Is there a known workaround solution?

  Just to update my original post, it seems that HP has updated the software for the Photosmart 26xx (2610 here) for Mac OS 10.6.  The software is dated 2009-10-21, but I'm sure it wasn't there until not so long ago.  Anyway, analysis of the scan key on the printer works again and several features appear to have been improved.  There is also a widget dashboard for ink level.

  I am impressed that HP will continue to improve and upgrade their software for a printer that is no longer supported for some years now.  This printer has been a very good experience.

• Error 500 CTS Cisco ' remote site is not supported contact your technical support.

  Hi guys, I installed 2 Cisco 500 CTS with Cisco CM 7.1.3

  I've updated the CTS 500 version 1.6.7 and I could add to the Director and I have followed all the configuration mentioned in Configuration Cisco Telepresence with Call Manager.

  I also configured the Midlet services and everything seems to work very well.

  The problem is when I'm doing a call between the 2,500 CTS, I'm getting on the screen the below error:

  "Remote site is not supported contact your technical support.

  Knowing that the two CTS have the same version and two of them are registered correctly and no problem is show.

  Can someone help me how I can check where I get this error?

  Thank you

  Seems to be a problem of config CUCM

  Check box and the location make sure you allow enough for a video telepresence call P.C.

• Error message: Windows Media Player could not complete burning because the disc is not compatible with your player...

  I have one of the same type of disc engraved the other day without problem. Tried to burn a CD today the progress achieved 99%, then I got the error message. Windows Media Player could not complete burning because the disc is not compatible with your drive. Try to insert another type of recordable media or use a disc that supports a write speed that is compatible with your drive.

  Hi David,

  Thank you for giving us the opportunity to help you with this problem.

  According to the problem description, you were not able to burn a DVD with Windows Media Player.

  You get the error that the disc is not compatible with your drive.

  Let me ask you a question.

  (1) what is the type of DVD or CD you want to create?
  (2) don't you make changes to your computer before this problem?

  I would suggest a few troubleshooting methods. Run the Windows Media Performance troubleshooting tool and follow the steps in the link to burn a CD or a DVD.

  Method 1: Run Windows Media Player Performance convenience store.

  Please follow the steps below to do so.

  (a) key Windows + W keys on your desk.
  (b) write the Troubleshooting in the search box in the upper right.
  (c) select the Troubleshooting option after the search.
  (d) select the option of Performance of Windows Media Player .
  (e) click Next to perform the resolution of the problems of performance of Windows Media Player and follow the steps.

  Method 2: Follow the steps in the link here and burn the CD or DVD.

  Burn a CD or DVD in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows-8/burn-CD-or-DVD-Media-Player

  I hope that solves your problem. Please feel free to write back to us, if you are facing any problem related to Windows.

• "FX Remix" is not available on your system

  After you import a song 6 track IOS of Garageband, I get an error message "" FX Remix"is not available on your system" and the computer (MBP 13 ", mid-2012, i7 2.9 GHz, 16 GB RAM, SSD, OS X 10.10.5) gives me a message"disk is too slow or overloaded system"stop playback completely.

  It seems that the latest version of iOS is not compatible with the latest (I think) Mac version (10.1.0).

  Any ideas?

  D.

  I have it exactly the same problem as well.  I created an entire song on my iOS device, imported into the Mac and more than half of these sounds is missing.  Even after downloading all additional files on the mac by clicking on the menu and selecting "Restore Sound Library", I still get the error message "Remix FX is not available on your system" when you try to open that specific song.

• Error code: 80070424 when you try to use Microsoft Update

  I get an error code 80070424 when you try to use microsoft update, and I can't use the fix it Center, or what I can do... It's on windows xp

  I get an error code 80070424 when you try to use microsoft update, and I can't use the fix it Center, or what I can do... It's on windows xp

  If you believe that you have done this with the same applications or applications, follow the instructions in the order, exactly...

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  Cleaning the components of update on your Windows XP computer

  It is a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you'll use the aggressive version - if requested):
  How to reset the Windows Update components?

  Reset.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know usingGoogle (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 20 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/

  Those who can help you discover visually where all space is used. Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end. This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• ERROR INDICATING THAT THE KEY CANNOT BE USED... WHAT I DO NOW?

  I INSTALLED WINDOWS 7 HOME BASIC, PREVIOUSLY ACTIVATED 2 TIMES, UNFORTUNATELY, I HAVE TO FORMAT THE DRIVE C, BUT THEN WHEN I REINSTALLED THE SAME OPERATING SYSTEM ON THE SAME COMPUTER COULD NOT BE ACTIVATED, INDICATING ERROR THAT THE KEY COULD NOT BE USED... WHAT SHOULD I DO NOW?

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Cannot install Minewsweeper - this app does not work on your device

  Recently I updated the day of Windows 7 Professional x 64 for Windows 8 Pro x 64, so I tried to install the Minesweeper in Windows Marketplace 8, I received the error "Sorry, this app does not work on your device."

  While I install other pretty good games, including Mahjong MS and MS Solitaire, I wonder what the problem is with the windows due to the problem... Thank you.
  http://PostImage.org/image/wfh09knmd/<-screeenshot.>
  PC configuration: 4 GB of RAM, Intel Core 2 Duo E6420, 640GO HDD with 166 GB free on drive C.
  Thank you.

  Hi Alexander,.

  It seems that you have a hard time with the installation of Windows game. We need more information to help you in a better way.

  1. you are using a third-party antivirus?

  2. you did it of any hardware or software changes?

  3. is the question confined to the Minesweeper?

  Here are a few methods, we can try to solve the problem with the installation of apps...

  Method 1: Download and run the troubleshooter modern UI App and check.

  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

   

  Method 2: Please follow the troubleshooting steps in the link below.

  http://Windows.Microsoft.com/en-in/Windows-8/why-find-install-app-Windows-store

   

  Method 3: check if the region is correct. Follow the steps mentioned.

  a. type 'region' on the start screen. Click on 'settings', and then press ENTER.

  b. on the "Format" tab, select "English (United Kingdom).

  c. click 'Preferences of languages' > 'add language' and add 'your language'.

  d. Once added, select it and click "move up" to make it the first language. Close the window of the language.

  e. in the 'region' window, click on "other settings" and check if the values are the same.

  f. click the "location" tab and change the location of the home to "your country" and then click OK.

  Method 4: temporarily disable the antivirus and check if that helps.

  a. press Windows + X, click on Control Panel.

  b. click on programs and features.

  c. right-click on the Antivirus system.

  d. click disable.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this helps. Please get back to us if you have any other questions. We are here to help you.

• Printer does not work on the Windows XP computer, get the error message like "an error occurred during port configuration. This operation is not supported.

  Original title: 1. printer stopped communicating with the computer. 2 port - associated configuration error?

  I have a big problem. All of a sudden my printer - AIO Photo964 said he cannot communicate with my computer. The printer works fine. I tried switching cables USB, all the trouble shooting suggestions, etc. etc. Nothing works and it makes no sense. I can't print anything. I thought it would be that I installed a Seagate external hard drive backup, then I uninstalled the program - no help. ITunes installed recently, because she had changed the printer default, changed back - no help. The USB cable is not tight in the printer (or both cables, I tried), but AFAIK it's not new (?) And when I try to configure the port, I get the error message "an error occurred during port configuration. This operation is not supported"I have no idea what it means.  Can someone help me with this? I have to return a new printer? The USB port on the printer is repairable if this is the problem? How will I know? Who would do that?

  Thanks, I'd appreciate any help.

  It is always useful to have the complete error message without paraphrase.

  It also helps to identify the version of Windows you have, including service pack.

  And it helps to give the manufacturer of the printer in addition to the model.  In your case, I guess you have a Dell printer.  I know that some Dell printers are rebadged Lexmarks, but I don't know if it's a.

  Why you try to configure the USB port?  It cannot be configured - you've discovered.  It's normal.

  It's quite strange that an iTunes installation would have had something to do with the printers.  What printer was made by default after installing iTunes?

  You say you have tried another USB cable.  Have you tried using a different USB port on the computer? Have you checked in the Device Manager (start > run > devmgmt.msc > OK) to see if there is all the warning icons in the category "controllers of Bus USB?

  I suggest you uninstall the printer software and driver completely and reinstall by following the directions in Its first Article.

  Don't skip step 4.  After step 4 and step 5, follow these steps:

  Important: If you have a Lexmark printer, skip the following

  Open a command prompt window (start > run > cmd > OK)
  type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  dependent on the spooler of sc config = RPCSS
  net start spooler
  output

  Note that there is no space before the = and there is a space after it.

  The Windows XP driver for the Dell Photo AIO 964 printer is here--> http://www.dell.com/support/drivers/us/en/04/DriverDetails/DriverFileFormats/Product/dell-964?DriverId=R113115&FileId=2731111743&urlProductCode=False

• Cannot print. Error "the port is not connected.

  Original title: SAMSUNG printer problem

  Hello! I just bought a SAMSUNG ML-1860 Monochrome laser printer. I have a machine from Asus with Winsdows 7 Pro installed in it. I plugged in the printer and it automatically detected and installed the USB drivers throguh. I have isntalled the software from the CD and now when I tried to send a print command, I couldn't print. I get this alert error instead. "The port is not connected. "I check. USB 001. I tried everything I could do, re installation. Checking ports... .and everything. When I restart it suddenly prints this document I wanted before but when I try again, I have the same error. Please help me... :(

  Hello

  Method 1:
  Try to run the printer Troubleshooter and check that if it helps, here is the link:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2:
  Try to run the below fixit and check if this may help:
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Check if that helps.

• Get the error code 30 alongwith usb port is not recgonizing devices

  Original title: recgonizing devices no usb port

  What is the significance of a code30?

  Hello Wendy2850,

  Thank you for the question!

  It is disheartening to know that have problems you with devices not getting not recognized. As I understand it, you get the error 30 code when the USB (Universal Serial Bus) port does not recognize the device.

  1. what device is not get recognized?

  2. don't you try to insert the device into a different port on the computer?

  Click on the link as a refernce to know the code error 30 and possible solutions.

  http://support.Microsoft.com/kb/125174

  Perform the steps in the link and check.

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Note: this also applies to Windows 7.

  Meet us if you encounter any problems with USB devices not getting not recognized or any other issue of Windows. I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• Cannot print. Reference Dell 944 communication usb port is not available. error check your firewall settings to ensure the printer communication is not blocked.

  Original title: unable to print. Reference Dell 944 communication usb port is not available.

  Message says 'check your firewall settings to ensure the printer communication is not blocked. Printer has worked faithfully until the problems started with the XP Home operating system. To cut a long story short ram upgraded to 2 GB, all unnecessary programs identified and technician Microsoft contacted to solve problems.  I was informed of problems caused by 3rd software party conflicts. Kaspersky was apparently the culpit. Dell Inspiron 32 now much faster but the printer will not work little matter what I do. I tried to reload with drivers & utility CD, drivers uninstalled & reinstalled on the site of all nothing is? Can someone help?

  DavidNicholsonXN,

  How to download and install drivers in the correct order

  also try to read...

  The owners of all-in-one printer Dell 944 thread (W7)

  Let the printer after Kaspersky

  Rick

• HP 15-r002se: USB port does not

  I have a problem with my laptop [HP 15-r002se] all three 3 usb ports do not work, or even detect that something is plugged, I tried techniques to conquer the problem by the system of formatting and reinstalling windows 8 32-bit where I found myself without success, because I can't able to get compatible drivers of troubleshooting. Then I go to the usb ports even on windows 7 64 bit does not. and finally, format and install windows 10 64-bit, I downloaded the drivers from hp website, but unfortunately when I run the downloaded software sometimes nothing appears either to the pop-up a message on the error or continuation and sometimes it shows this kind of error after it finished extracting

  

  Finally with the help of pilots pack that I managed to install all required drivers but finally arrived with NO SUCCESS, yet neither the operation of the usb port. Here is the screenshot of my device manager.

  

  Please, I seriously need your help to solve this problem, because I am a student, I can afford to buy another laptop earlier

  Hi @Mustapha_Musa,

  I read your message and please try the following steps. A brilliant work has been done by trying these steps. Kudos to you on this point. It's a problem of clear material with the device. The USB ports are defective, the motherboard should be replaced. you will need to contact HP telephone support on this subject for the machine.

  HP technical support are available by clicking on the following link:
  
  http://h22207.www2.HP.com/us-en/?openCLC=true
  
  (1) once the page opens, please select the country in which you are located. Then enter your model of HP on the right number.
  
  (2) then choose "Contact the Support" tab at the top and scroll to the bottom of the page "HP Support - contact" to fill out the form with your details.
  
  (3) Once finished, click the "Show Options" at the bottom right.
  
  (4) Finally, scroll to the bottom of the page and select "Get a phone number." A file number and telephone number will now fill for you.

  The workaround, for now, is the following: If you have a USB port on the device that works, then you could buy a USB port extender and connect it to the port good work.

  Then you connect other devices to the USB port extender. This way multiple devices may still be connected to the computer.

  Just to say thank youPlease click the ' Thumbs Up 'button to appreciate my efforts. If it helps, Please mark this "accepted Solution".

  Thank you and have a great week ahead.