Edge 13 does not start

Hello

A few days ago, I closed the lid of my Lenovo edge 13, put it to sleep. When I have opened the lid, it just froze there (black screen, only red LED was on), so I shut it down by pressing the power button. Since then, it will not start regularly. If I press the button, the screen remains black (wont even go into the bios) and only the light. After about 5 to 15 times to turn market with the power button, it will start normally.

I tried to start with a single module of RAM (currently I have two) and without battery, but the problem remains.

I can do, or if the motherboard is broken? My warranty expired 2 months ago.

Thank you

Jones

Ok

disassembled my edge. Compound radiator is fairly degraded on the cpu and another chip. cleaned everything and replaced the compound with a compound similar to the search (putty' grey diamond ish composed of heat sink). Vaccumed on fan with my vacuum cleaner gently.

Edge of boots now every time.

))

Tags: ThinkPad Notebooks

Similar Questions

  • Adobe Edge inspect does not start

    I installed Adobe edge inspect on my Macbook Air running 10.8.2 and when I run the app, nothing appears in the dock.

    When you look at the activity monitor, sorting by use of the CPU, everytime I launch the app that the "Crash report" process moves upward, then the other, then he went.

    Any suggestions on getting the running application?

    I just tried to run the application (from Spotlight if it makes a difference) and it worked!

    But just for you guys, I dug up a log from when it was still breaking (not starting) for no apparent reason. It's in my selection below:

    https://DL.dropbox.com/u/8410101/EdgeInspect_2013-01-25-161959_localhost.crash

    Sorry for the delay.

  • Edge 15 does not start in Win10 after upgrade

    Updated 15 edge of Win8.1 to Win10 today. Everything was fine, then an installation file is stuck so I held the power button for a forced stop. When I turn on again, I get nothing, just a blank screen. (I couldn't even Lenovo logo) After an another power cycles, I saw a screen for "automatic repair", then he went and I'm still stuck on a white screen, noise from the hard drive, it is not read.

    I also tried to boot "Windows boot manager" and hard drive, both got white screen.

    Any help?

    P.s. I upgraded to Win10 once a factory reset to Win8.1, so I do a factory reset, but it seems impossible to get to the option more.

    Thanks for your help, I've actually made a diagnosis of HD and found too many errors, I'll replace the HD.

  • MacBookPro6, 2 batteries ran down to 2 mos now does not start

    15 "2011 MBP 6.2 running 10.11.3 remained out of order, disconnected for about 2 months. The battery after plugging and shows 5 lights. The MBP now does not start - no edge no screen no effects nothing.

    I have reset the SMC, took out the battery and successor, removed or put around the bars of memory without any effect.

    A bad battery will keep it to start when it is plugged? Is there anything else I should try?

    TIA,

    Bill

    What happens if you leave the battery or disconnected and try to start the machine?

    It happened sometimes with macbook air which complete draining the battery damaged map logical.

    A defective battery should not influence your machine when you hooked it up.

    I recommend you to wear to a bar of genius of apple for validation.

    See you soon!

  • Does not start after the upgrade to 1.5.

    Does not start after the upgrade to 1.5.  "EdgeAnimate.exe - not found entry Point? -Point procedure entry GetGestureInfo is not found in USER32.dll dynamic link library. »

    All ideas

    No problems in the past with edge since September 2012.

    =============

    Laptop HP Pavilion dv7-2185dx

    Dv7-2185dx product name

    #ABA product number NV023UA

    Microprocessor 2.00 Ghz Intel Centrino 2 Processor Intel Core 2 Quad Q9000 processor technology

    The microprocessor Cache L2 6 MB Cache memory

    6144 MB of memory

    Memory Max 8192MB

    Graphic ATI Mobility Radeon HD 4650 (M96)

    Video memory up to 2815 MB (1024 MB dedicated)

    500 GB (5400 RPM) hard drive

    Multimedia drive LightScribe SuperMulti 8 X DVD±R/RW with Support Double layer

    17.3 "diagonal HD + LED display high-definition HP BrightView Widescreen Display (1600 x 900)

    Fax/Modem high speed 56 k modem

    Network integrated 10/100/1000 Gigabit Ethernet LAN adapter

    Wireless Connectivity Intel WiFi Link 5100AGN

    The Altec Lansing SRS Premium Sound technology with subwoofer

    101 keyboard compatible with the keyboard keys full size numeric keypad with integrated

    Pointing device touch pad with On / Off button and dedicated vertical scroll up/down pad

    PC Card Slots 1 Slot ExpressCard/54 (also supports ExpressCard/34)

    External ports

    5-in-1 Integrated Digital Media Reader for cards Secure Digital, MultiMedia Card, Memory Stick, Memory Stick Pro, or xD Picture Card

    4 universal Serial Bus (USB) 2.0, 4th port shared with eSATA

    2 headphone

    1 microphone input

    HDMI

    1 VGA (15-pin)

    eSATA + USB 2.0

    1 RJ-11 (modem)

    1 RJ - 45 (LAN)

    expansion port for computer 1 cell 3

    1 IEEE 1394

    irewire (4 pin)

    1 consumer IR (remote receiver)

    Other devices HP Webcam with integrated digital microphone

    Dimensions 16.2 "(W) x 10.9" (D) x 1.37 "(min H) / 1.70" (maximum H)

    Weight lbs 7,74

    Housing for Kensington MicroSaver Security lock

    Turn on the password

    Accepts 3rd party locking safety devices

    Software

    Operating system:

    Genuine Windows Vista Home Premium 64-bit with Service Pack 1


    Hi, people.

    I was able to reproduce the problem here, so the good news is that you're not imagining things.  We are looking in the options right now for you guys, and I will contact you individually by private message to start again at the top.  This being said, please note that our techniques, Vista is an operating system that is not supported, and our team is not stable time on this platform.  We will do the best we can and we will keep you guys, update as to what status is.

    Thank you

    -Elaine

  • Siri does not start under macOS Sierra

    I've recently updated to macOS Sierra (public version) and everything seems fine, except for allowing to Siri. I tried to enable the system preferences as well as execution of the Siri application in the application. I even tried to 'facilitation' by selecting in the menu bar.

    In any case it does not start. Upon activation in system preferences, I get "There was an error in the preferences of Siri." and it takes back me to the main view of system preferences.

    Y at - he of the log files that I should be reviewed to determine the cause of this problem?

    Thank you

    Steve

    Same thing here on a MacBook Pro (13 inch, late 2011)

  • Black MacBook does not start

    I have a 10 year old black Macbook, which does not start when a battery is installed.  If it is connected without battery installed, it lights up, but if there is a battery in it, even if it is plugged in, it will get the startup sound and the screen of the Apple gray, then turn off.  I got a new battery and charge it where the charger turned green, but the results are the same.

    Any suggestions?

    It is difficult to say what is happening with this machine, since the time and wear are considerations. I don't know what version of the operating system that you use, but there is a sequence of things you should do - in order of severity.

    http://www.howtogeek.com/217158/what-to-do-when-your-Mac-won ' t-start-up.

  • iPhone hot 5s fees and does not start

    phone is connected to the load.  After a while I checked it and it was very hot.  I unplugged it and now it does not start.

    Have you ever tried to force reboot the phone by holding down the button sleep and home for 10 seconds, until the Apple logo comes back again? You won't lose data.

    More troubleshooting can be found in this article:

    If your iPhone, iPad, doesn't respond or won't turn on - Apple Support

  • iMac does not start after the last security update

    Hello

    After the last update my iMac (late 2009, El Capitan) does not start.

    The iMac starts he accepts my user and password entry, the loading bar stops at 80% and then nothing happens... after I turn off the iMac. Repeating this procedure change nothing.

    Does anyone have any advice for me?

    THX

    INTELLECTUAL PROPERTY

    a solution that helped me:

    Re: security update causes damaged Apps

  • iMac does not start after 10.11.6

    Since the 10.11.6 patch my IMac does not start with my hub plugged.

    Everyone

    I assume you mean a USB hub? What does do when it's plugged in? It starts successfully when the hub is not plugged? If so, I would say that something is wrong with the hub or there is a problem with the port it is plugged or something plugged into the hub.

    Try to plug it into a different USB port on your Mac.

  • MacBook Pro does not start

    I have tried several things but the laptop won't start do not. Power cable showing green light as if the laptop is fully charged. It's like the death does not start.

    Try resetting the SMC

    Reset the management system (SCM) controller on your Mac - Apple Support

    You said "It's like death does not start."

    Does this mean that he shows no signs of life? Indicator light power?

    Hear the carillon?

    Hear the fans?

  • The FireFox 42.0.1 application does not start.

    The FireFox 42.0.1 application does not start. I can uninstall and reload FireFox 37.0.2 and that worked, but now when I load 37.0.1 it installs really 42.0.1 that no longer works.
    I had to use IE 10 to contact Mozilla.
    Year annual should be ashamed of this...
    Can you tell me why Mozilla FireFox 42.0.1 installs but won't work?
    In addition, why FireFox 42.0.1 install when I try to install 37.0.2?

    It is possible that your firewall or other security software blocks or limit Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

    Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and allow your firewall to ask permission to get access full and unrestricted, again to install for Firefox and the plugin-container and the update process.

    See:

  • Firefox does not start, the Profile Manager is not available

    Firefox worked, then update it does not start. I tried all the fixes; However, the Profile Manager is not accessible or even present in the execution file. I unintalled and reinstalled several times, but I still can't get it to work. There is no Windows or Norton firewall block so I do not understand. What can I do? I want to use Firefox because it's the best browser; but now I'm forced to use Oscar. It's not terrible, but I prefer the features I've had with Firefox

    I had upgraded to the latest version; but the thought of demotion to the version which worked perfectly. In the end, I had to defrag, do a registry clean and optimization of performance of PC, but for the upgrade launched. So, I'm happy to say that I reply to this post with my Firefox browser. Thank you very much for your help. If all goes well, I won't have problems.
    DoubleD52

  • My MacBook does not start and fires after the Apple logo. I received this error via FirstAid detail in disk utility.

    Hi Apple/community,

    I need a help.

    What it means? Operation failed! My MacBook Pro does not start. It cuts after the loading screen. What will happen?

    Any help will be greatly appreciated. Thank you!

    Well, it seems that your MacBook Pro hard drive has failed and cannot be repaired by disk utility.

    Try to reboot into single user mode: How to start your Mac in single user mode or verbose--Apple Support

    If it works, try to repair the disk with this command:

    fsck -fy

    (http://osxdaily.com/2013/08/07/how-to-repair-a-mac-disk-with-fsck-from-single-us UH-mode /)

  • Firefox does not start - claims that it is already open

    Firefox does not start. He claims to be already running, but that doesn't seem to be the case.

    I tried to create a new user profile, but when I try to open Firefox now, the menu "choose user profile". I tried the new profile and they old, and both give the same error message. "Firefox is unable to use the"Default user"profile because it is in use. To continue, close the Runspace of Firefox or choose a different profile. »

    There is an entry for firefox.exe in the menu of "details" to my task manager and nowhere else. When I try to put an end to this task, I get the following error: "the operation could not be performed - access denied."

    Due to some troubleshooting research, I tried to delete the parent.lock my profile folder, but I get this error: "the action cannot be completed because the file is opened in Firefox."

    I tried to transfer my bookmarks and preferences from Firefox to Chrome, but I had a similar error suggesting that Firefox was already open and I have to close first.

    I also turned off my computer and uninstalled and reinstalled Firefox several times.

    I'd really rather not lose all my bookmarks Firefox, modules, and preferences. I also prefer to use Firefox for Chrome, so if anyone can help me I would really appreciate it. I don't know what else to try.

    My PC runs Windows 10, incidentally.

    Try to delete the parent.lock file in the Firefox profile folder.

    See:

    What security software do you have?

    Try to create a new shortcut on the desktop Firefox and maybe to reinstall Firefox via a clean reinstall (i.e. remove the Firefox program folder).

    If you cannot remove the Firefox program folder and then try to rename this file to "Mozilla Firefox.old".

    • (Windows 64 bit) "C:\Program Files (x 86) \Mozilla.
    • (32-bit Windows) "C:\Program Files\Mozilla Firefox\"

    Start the computer in Mode safe mode with network support Windows (on the startup screen, press F8) to see if that helps.

Maybe you are looking for