Edge 15 does not start in Win10 after upgrade

Similar Questions

• Dell Dimension does not start in Vista after upgrade

  A friend had a Dell Dimension E521 that won't start - has the missing file system\hal.dll.

  As there was nothing on this computer, he needed, I rebuilt it install a new copy of Windows XP, used the upgrade disc closed for upgrade to Vista and ensured everything in its original package has been installed. Let him install the Windows updates at night and in the morning, after a reboot it indicated that there is an update available. I've updated that and restarted and he said there are only four more updates that memory on the video card. I've updated those, but now it does not start at the top.

  I'm going through the boot process, but as soon as it is the screen black with the Microsoft Corporation and the (green?) bar he starts moving forward a very small amount, and then restarts. It comes up with the selection of Windows startup screen and I tried the secure boot and last good Configuration known without result.

  I tried the original XP disc to do a repair, but this doesn't seem to work with Vista?

  How can I recover a work computer or do I have to reinstall again?

  Thanks for any help, that all the world can offer.

  If you have installed Windows Vista good the first time that the hard drive should be fine however I would suggest running the Dell diagnostics just to be safe. To do this follow the instructions on page 405 of this document and perform extensive tests.

  http://philipyip.files.WordPress.com/2013/02/Windows-reinstallation-guide-02-02-2013.PDF

  What video card you have? Have you tried to remove the video card and running using the onboard video? Have you installed Service Pack 1 before the system drivers?

• Satellite 1800-400 does not start, or crashes after upgrading RAM

  I have the original configuration of RAM for the S1800-400 with 120 MB. I bought a 256 MB RAM with the following description: EXT256-3069/JR, MEM 256 MB RA Toshiba Satellite PRO 4600 series C650, PIII-7500/750/800 #PA3069U (I think the brand is Transcend).

  When I put this slot in the machine, keeping the original and start the computer, it does not start, either on the initial screen of freezing before downloading anything either or that goes to the screen where you can start it in safe mode, but then it does not start.

  I removed the new RAM and it works well again.

  What can be the problem:

  (1) is this new RAM is not compatible with the computer? Based on the selections of the internet service provider, it should be (it's a Portuguese company with their own memory configuration options).

  (2) the computer can work with the original 120Mo and the new 256 MB, or should it be both the same size/brand?

  (3) is there any other problem that I don't have?

  TKS

  Hi Ricardo

  I agree with feliks.
  The module is not compatible and not taken in charge can be responsible for your problem.
  The best way is to use the Toshiba recommended of the memory modules.

• My MacBook does not start and fires after the Apple logo. I received this error via FirstAid detail in disk utility.

  Hi Apple/community,

  I need a help.

  What it means? Operation failed! My MacBook Pro does not start. It cuts after the loading screen. What will happen?

  

  Any help will be greatly appreciated. Thank you!

  Well, it seems that your MacBook Pro hard drive has failed and cannot be repaired by disk utility.

  Try to reboot into single user mode: How to start your Mac in single user mode or verbose--Apple Support

  If it works, try to repair the disk with this command:

  fsck -fy

  (http://osxdaily.com/2013/08/07/how-to-repair-a-mac-disk-with-fsck-from-single-us UH-mode /)

• Edge 13 does not start

  Hello

  A few days ago, I closed the lid of my Lenovo edge 13, put it to sleep. When I have opened the lid, it just froze there (black screen, only red LED was on), so I shut it down by pressing the power button. Since then, it will not start regularly. If I press the button, the screen remains black (wont even go into the bios) and only the light. After about 5 to 15 times to turn market with the power button, it will start normally.

  I tried to start with a single module of RAM (currently I have two) and without battery, but the problem remains.

  I can do, or if the motherboard is broken? My warranty expired 2 months ago.

  Thank you

  Jones

  Ok

  disassembled my edge. Compound radiator is fairly degraded on the cpu and another chip. cleaned everything and replaced the compound with a compound similar to the search (putty' grey diamond ish composed of heat sink). Vaccumed on fan with my vacuum cleaner gently.

  Edge of boots now every time.

  ))

• XW4400 does not start. Occurred after the power to the system off for 2 weeks. Now, does not start. Help!

  As noted above in the subject... exploded with power for about 2 weeks supply.  On his return the

  system won't start.  It keeps going in a circle.

  Here's what happens;
  

  (1) it goes to the window HP

  2) immediately goes to a window stating "windows did not start properly. A recent hardware or software change might be the cause. "Then on and other causes.  Well, none of them took place.

  To the bottom of the window there's several options to try.  Safe mode, Safe Mode Networking, last known successful... and start normally.  All the options have been tried several times.  To 30 sec timer waiting for your choice.  NONE OF THE OPTIONS WORK.  Cannot start in any mode.  After all of the selections it shows;

  (3) a flash of the microsoft windows screen and then we go back to number 1.

  Info on the system;

  XW4400

  • Manufacturer part number: ET115AV-CTO
  • Manufacturer: HP
  • Product description: ET115AV-CTO HP xw4400 Workstation computer desk
  • Product type: desktop
  • Form factor: mountable Convertible minitower on rack
  • Operating system: Windows XP Professional 64-bit
  • Processor: Core 2 Duo processor E6700 (2.66 GHz)
  • Front side bus: 1066 MHz front Bus up to
  • Chipset: Intel¿975 X Express
  • Memory: DDR - 2 667 MHz ECC unbuffered
  • Installed memory: 2 GB
  • Maximum memory: up to 8 GB
  • Installed hard drive: 160 GB
  • Hard drives: up to 4 SATA hard drives 2 to maximum
  • Expansion bays: 3 external bays of 5.25 inch and 1 external 3.5 inch bay 2-Bay internal 3.5-inch
  • CD DVD: 16 X DVD + - RW DL
  • Speed variators: controller 4 channels SATA 3 GB s integrated with RAID 0, RAID 1, RAID 0 + 1 capacity
  • Graphics card: NVIDIA Quadro FX1400
  • Expansion slots: graphics PCI Express (x 16) 1 slot 1 PCI Express (x 16 mechanically x 4 electrically) slots 1 PCI Express (x 1) and 3 long legacy PCI
  • Audio: Integrated high definition Audio with Jack Retasking capability,
  • Networking - communication: integrated Broadcom 5755 Netxtreme Gigabit PCIe LAN
  • I/o ports and connectors: front: headphone, microphone, 2 USB 2.0 and 1 optional IEEE 1394 a rear: 5 USB 2.0 1 USB 2.0 (internal) 1 serial port standard 1 keyboard PS-2 port 2 in parallel and mouse audio Gigabit LAN RJ-45 1 built-in audio microphone
  • I have no recovery disks!

  Hello:

  I can't help with your problem, because in this case, my recommendation would be to reinstall the operating system.

  What I can do, is give you information to get a set of recovery discs for your xw4400 for only $10 USD.

  Here's how:

  1. Enter the part number and the serial number on the top of the computer on the Silver label. The model # is a Compaq HP xw4400, but the part number is on this tag silver under the serial No.

  2. call HP at 1-800-952-7689, option 1 (ranking in the list in the option made restore disks).

  3. provide the information asked by the representative who answers the phone. Some simply ask for the serial No., some want at the same time, or they'll want just the serial number and the type of computer (xw4400).

  4. do you have a Master Card or Visa ready for purchase. They do not take discover. You will be charged $10.00.

  You will receive the discs by first class mail, or you can pay an additional $10.00 for shipping FedEx.

  Paul

• Adobe Edge inspect does not start

  I installed Adobe edge inspect on my Macbook Air running 10.8.2 and when I run the app, nothing appears in the dock.

  When you look at the activity monitor, sorting by use of the CPU, everytime I launch the app that the "Crash report" process moves upward, then the other, then he went.

  Any suggestions on getting the running application?

  I just tried to run the application (from Spotlight if it makes a difference) and it worked!

  But just for you guys, I dug up a log from when it was still breaking (not starting) for no apparent reason. It's in my selection below:

  https://DL.dropbox.com/u/8410101/EdgeInspect_2013-01-25-161959_localhost.crash

  Sorry for the delay.

• Satellite L650-16w: BIOS 2.40 fan does not start standby mode after

  I have the toshiba Satellite L650-16w
  the version of the bios is 2.40

  I have a problem: when turning on the pc, the fan speed is still 90%, whatever the pc, and if the computer goes into sleep mode the fan stops and does not restart and I got the message: 'problem with the cooling system, turn to pc immediately '.

  I had this problem also when I got the 2.2 bios, when I upgraded to 2.40 for a few weeks, everything was normal and now the problem again.

  You set the default BIOS?
  Make sure in the BIOS, press F9 and then save the changes by pressing F10.

• OfficeJet 7410xi: computer does not have USB printer after upgrade to window 10

  The computer does not find the USB connected printer (Officejet 7410xi) after having modernized the window system 10.

  Hello

  Download and install the following software:

  http://ftp.HP.com/pub/softlib/software13/COL30951/MP-110165-3/AIO_CDB_Net_Full_Win_WW_140_408-5.exe

  During SOUTH clck the link (4th one) software selection step and uncheck the Bing toolbar due to incompatibility issues with MS Edge, then continue with the installation of you

  Please let me know the results,

  Shlomi

• My iPhone that does not load Plus 6 after upgrading iOS 9.2

  Hi guys.

  I have a problem as the title. My iPhone that more than 6 can not load after update iOS 9.2. It works perfectly before. Is that what someone has experienced similar problem? How can I solve this problem?

  Thank you

  Doskey

  What do you mean by does not load? You don't see a loading progress bar?

  See: If you can not load your iPhone, iPad or iPod touch - Apple Support

• Does not display Image webcam after upgrade to XP PROFESSIONAL

  
  

  I called and spoke with the technical support of Lenovo. After the restoration of the original image of the XP Home Edition system, the camera still does not work and Lenovo technology composed in my computer to confirm that it is a faulty webcam. I'll post an update on my tech support experience in a short time (in the main forum).

  John in Indiana

• My DVD ROM does not recognize DVD discs after upgrading Windows XP to Windows 7.

  A few days ago, I updated my laptop to Windows XP to Windows 7. Everything seemed to go well until I tried to burn a DVD disc. The program I use for this purpose is Nero 9.4.26.0. So, I've discovered I don't have problems with writing and playing the usual CD but my laptop does not recognize and does not read or write DVD. Laptop HP Compaq 6510 b and the DVD ROM is MATSHITA DVD - RAM UJ - 860H ATA DEVICE. Please share your ideas about the problem. I really enjoyed this :)

  Some CD / DVD readers may require an update to function well in Windows 7.

• Satellite Pro A100-080 does not start - stays dark after 3 beeps

  Hello
  After a week off, the Toshiba Satellite Pro A100-080 (PSAASE-00G004GR, 4 GB RAM) of my kids start not anymore.
  When turn on/off the system, he * will beep 3 times * (one long, two short beeps), the HDisk light flashes 'blue' and then nothing more. A/c and battery power LED are 'blue', which seem to be OK status.
  No other useful help, as the screen remains dark.

  We had upgraded to 4 GB MEM (Kingston) a year ago and I already tried the old used 1 GB (included with purchase) or the replacement of 2 x 1 GB since December 2007, but equal status with these modules. This is not
  a defect of memory.

  I hope that this is not the motherboard, probably only the NVIDIA GeForce Go 7600 graphics included adapter?
  Does anyone have an idea what could be the problem?

  Thx for a short help.

  Hello

  Generally this type of beep codes are hardware related or with other words, hardware is defective. So I think it's a hardware problem and an ASP must check your laptop computer to identify the cause of this.

  On the Toshiba site, you will find a list of aspic:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

• Satellite does not start without pw after updating secure phoenix BIOS

  Hello

  I am new to this forum and have the problem, which, after an update to the home page of Toshiba with Phoenix secureCore Tiano my satellite L555, wondered about a password at startup from the BIOS, I have not entered, and has never been asked. (X-)

  What can I do to get this machine started? I tried to get with the "F2"; and F12 when starting the machine, but he asks allways my about this password and after 3 'entered wrong' laptop computer closes down and I have to restart. (with the same results)

  Can someone give my an idea, how can I get my laptop to work normally? ?:|

  Thank you
  We

  Hello we

  Unfortunately it is not simply the method how to bypass BIOS password and you now need professional help.
  Please contact the nearest Toshiba service provider and explain the situation. They will help you with that.

  Sorry buddy

• What to do when it does not start or recover after updating Vista SP1, error 0xc01a001d.

  This is the place where it freezes.
  37370 (\Registry\Machine\compo nets\Derived data...)
  Or
  Loaded\Windows\system32\drivers\crcdisk.sys
  Thank you
  Wine

  Hi wine,

  If you can get a full version of disc Vista, you can read the following article and try to perform a repair starter or the system restore.

  What are the system recovery options in Windows Vista?

  If you still experience the problem, try a Checkdsk to repair problems related to bad sectors, lost clusters, reticulate files and directory errors.

  a. Insert the installation disc.

  b. restart your computer.

  c. click on the Start button, click the arrow next to the lock buttonand then click restart. If you are prompted, press any key to start Windows from the installation disc.

  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings.

  d. choose your language settings, and then click Next.

  e. in the System Recovery Options menu, click on command prompt.

  f. at a command prompt, type the following command and press on ENTER.

  chkdsk /f /r X: ( drive letter)

  g. press y when you are prompted to check the drive the next time the system restarts.

  h. restart the computer.

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.