Edit the entries in the Device Manager

Similar Questions

• Portege M700 - 3G does not work and has no entry in the Device Manager

  Hello

  I've already found [this | http://aps2.toshiba-tro.de/kb0/TSB0302TL0000R01.htm] for 3G installation, but it does not help me. In my device manager is no entry called 'Data Interface', and that's why the guide will not work. Under "modem" is only the "TOSHIBA Software Modem. The LED next to the orange wlan LED is off. When I use FN + F8, the I get only entries for Wlan and Bluetooth. In the Bios (or what ever Toshiba call a bios, 3 pages with very few options, very bad in my opinion) I couldn't find any option to turn on the 3g modem (I suspected that it be turned off in the Bios).

  Is there an option where my 3G modem could be turned off, so that the device manager would be ' d recognize it? WIFI and BT operate correctly.

  A new SIM card is correctly inserted in the SIM slot behind the battery. I can't find my problem described in the web or this support forum.

  Any help is appreciated!

  Hello use

  Your laptop is preinstalled with original Toshiba recovery image, I mean you have to factory settings?

• Drive DVD-ROM 37 error message Code in the Device Manager on Satellite M30

  Hello

  I'm new to this forum and I wonder if anyone can help? I have a Satellite installed 30-106 M which has the above CD. At present, it does not work when I go to Device Manager, the error massage that I have is that follow 'Windows cannot initialize the device of this hardware driver. (Code 37) ».

  Can someone offer me some advice please.
  Thank you
  Trevor

  Hello

  I studied in the Microsoft Knowledge base, and it seems that this error is displayed because the driver returned error in her routine to the driver entry.
  I think that you need to uninstall the driver, and then click find the hardware changes to reinstall or upgrade the driver.

  You can do it in Device Manager. Otherwise, you can remove the drive in the Device Manager list and after restart of the new mobile operating system should recognize the drive again.
  After this procedure, you should test the device if it will work.

• 3 monitors listed in the Device Manager on Tecra A6 PTA60E

  I have a PTA60E A6 under Xp Pro SP3 with all updates.

  I notice that in Device Manager in the monitors, I have three monitors monitors under graphics cards and Play Plug listed abd, I have the Intel 945 chipset appears twice.

  How to get back to showing just one of each?

  Shaun

  Hello

  I have 2 different laptop with Win XP and Vista pre-installed.
  In both cases, the three monitors are available and listed in the Device Manager.
  I guess there is nothing wrong with the system and the entries are correct.

  You don't have to be worried about that ;)

• Can BB smartphone be transferred to the PdiPort in the Device Manager?

  Original title: Hello users experience

  I have a lot of questions : outlook work when using wireless adapter for the connection, the connection is very good to excellent Can can someone explain?

  
  
  My XP home Edition 32 bit can be configured to use 64-bit to run faster multiness?  If yes how to do in this regard?
  
  
  Can the Smartphone BB leave Bus USB controllers to the class for PdiPort devices in the Device Manager box? According to RIM, they saw that the smartphone usb device in the class for PdiPort devices, it is not supposed to be here in Universal Serial Bus controller. Could someone someone out there explain this!
  
  
  Because every time I have download smartphone that he goes to the Universal Serial Bus Controller port, now I need to cam and headphone front ports, and smartphone is no longer necessary in ports before, I want to change that uses the front and back ports.  I think basically that it of used in a port on the front.
  
  
  HEY HEY HEY thanks for your replies.

  Hello

  Issue of Outlook:
  What are they to work wireless with envy?
  We need more information to help you with the number.

  XP Home edition question:
  If you want to convert 32-bit WIndows XP 64-bit then, you must reinstall the operating system with windows XP 64-bit disk.
  Reference: http://windows.microsoft.com/en-IN/windows/help/install-reinstall-uninstall

  Issue of BB smartphone device:
  Have you tried to connect the phone to the return postage and check what happnes?
  Reference: http://support.microsoft.com/kb/310575

• HP m8120n no Ethernet in the Device Manager and not detected

  Hey all:

  I have a desktop HP Pavilion Media Center m8120n (product sheet here) and I recently did an installion of installation clean factory, Windows 7 Pro 64 bit with a DVD retail of Windows. I managed to get the drivers for almost everything, but there are some persistent problems.

  The most serious of them is Ethernet. I can't find drivers ethernet for this machine, even after the update of Windows running several times, no hardware drivers have been found. The ethernet controller/port is not still appear in Device Manager at all!

  I tried to use the driver for this calculation pager on the HP support site, but there is no mention of all the Ethernet/LAN drivers at all.

  I read that sometimes it is important to update the chipset first driver in order to get the job of ethernet. Since HP provides no chipset driver, I decided to try updating the chipset 8120n with theutility to update Intel drivers Intel's Support page.  I have updated to version 9.4.0.1017, once the Web page has scanned my system. However, even after the update the chipset and Windows restarts, I have still no Ethernet at all.

  Depending on the product specifications page, under the section network, the computer uses a controller Ethernet Intel 82566DC. However, after trying to install the driver for the Intel 82566DC since the Intel, the installer website told me that no network controller Intel were present on the system.

  What is really worrying, is that not only does the Device Manager does not even see an Ethernet controller, but the Intel drivers update utility didn't recognize it under the section "Wired" after that the latter had analyzed my computer. Ethernet controller also does not appear under system information.

  I'm starting to wonder if it is a hardware issue and not a driver problem at all! The Ethernet port may be damaged or does not work for Windows do not install the drivers, or even recognize it.

  Does anyone have advice or steps I could take to rule the hardware problem and find a driver that works for my installation of Windows 7 on this computer?

  "Violence is the last refuge of the incompetent." -Issac Asimov, from its roman Foundation.

  Good new! It worked! It was really the BIOS that was causing the problem.

  On the Advanced Settings tab, there is an entry called Onboard LAN off, just like the desktop I have to work!

  After booting, Windows installed the drivers for it right away, and now I get to enjoy this sweet Gigabit speed on my network!

  I'm so happy that it was not a hardware problem, and that it was a simple change to the configuration of the BIOS.

  Thanks for all your help!

  I'm as resolved marker.

• Is there anyway that I can update all my devices. I do not use the Device Manager by clicking one at a time.

  Is there anyway that I can update all my devices. I do not use the Device Manager by clicking one at a time.

  I have windows vista 32 bit.
  -------------------------------------------------------------------------------------------------
  Re-edit:-I do not use the Device Manager to find all my drivers and by clicking on each of them... one at a time update.
  Y at - it another way to find and update the drivers at the same time and for free.

  Your question is too terse and contains too little information for anyone to
  help you.  Read this article and try again:

  http://support.Microsoft.com/kb/555375

• DVD/CD drive is not visible in the Device Manager, but it works.

  Original title: My dvd/cd drive is not visible in the Device Manager but

  This works because I have jst begin with him. I can hear the disc running, but nothing ever comes and when I go to computer its not visible there either.

  Hello

  See the methods listed in the article mentioned below.

  My drive does not appear in Windows Explorer

  http://support.Microsoft.com/kb/330140

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 how to back up and restore the registry in Windows.

  See this link to view the hidden devices:

  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff553955 (v = vs. 85) .aspx

  I hope this helps!

• DVD RW drive disappears from the computer and the Device Manager on Windows 7 ultimate 32 bit

  After upgrading Vista to Windows 7, my DVD RW drive will disappear from official view and computing device and a scan for changes on the material or use of the player will not solve. Resolves a reboot of the PC (HP - Sony DVD RW desktop computer).
  It appears in the BIOS and when the first install Windows 7 found and the device manager reported everything is ok. It seems that after a power management feature has occurred and the PC wake up the disc is missing and the only way to return it is a restart.
  Help, please

  Thanks for the info, I had seen it work elsewhere on the net for similar problems with Vista, but not of joy as the either the upper or lower part reg entries appear under this subkey. They do it for the disk subkey but no CDROM

  Hibernation is disabled and I use power management to High Performance with only a screen sleep as a default 20 mintes and the hard drive after an hour of sleep. I upped since the two of them to see if that helps.

• DVD drive icon has disappeared from the Device Manager and my computer

  DVD drive icon disappeared from the Device Manager and my computer. I m using window 7. How can I get it back.

  Ashwani Hello,

  Thanks for posting on Microsoft Community.

  There are various reasons why a CD or DVD drive may not be detected. I would like to ask all of the steps in the Microsoft Article describes a troubleshooting and check if they help to resolve the issue.

  Your CD-ROM or DVD drive is not recognized by Windows or other programs

  Note:

  Before editing a registry key or subkey, we recommend that you export, or make a backup copy of the key or the subkey. You can save the backup copy to a location that you specify, for example, a folder on your hard drive or a removable storage device. If you make changes that you want to cancel, you can import the backup copy. For more information about backing up the registry, please see the link below.

  How to back up and restore the registry in Windows

  Hope that advice is useful. Let us know the State of the question, so that we can guide you further.

• Windows 10 - PC recognize iPad, but iTunes does not. Nothing appears in the Device Manager.

  I followed each step that I could find on the Apple Web site. The PC recognizes the iPad iPad wonder to trust the PC and I do it, but iTunes does not show the iPad and the Device Manager doesn't show anything Apple. I even uninstalled, to alreay redownloaded and reinstalled iTunes.

  Have you tried to remove and reinstall iTunes by following the steps here? All the steps are essential to eliminate corrupt drivers:

  Remove and reinstall iTunes and software for Windows 7 and later versions - Apple Support components

• Envy 15 t-j100 Select Edition: the device is not connected to the computer. Please insert the authentication device.

  Hello

  So I'm working on a LT desire that has been upgraded from Windows 8.1 to 10 recently and it is this message on the login screen "the device is not connected to the computer. Insert the authentication device. We can't identify what it means or what needs to be done to clear the screen. The user States that the fingerprints of impression of BIO sensor doesn't seem to work either. I looked in the Device Manager, and I see a Synaptics PS sensors (WBF) listed here and is properly installed. I even updated the driver of sensor ep on the support site of the desire, and we still see on the login screen.

  Y at - it no information or help to clear this message?

  We also note that the number on the keypad lock seems to be disabled during startup of windows 10 upwards. Before on windows 8.1 has been activated. Is there any setting to 10 to keep the active number lock.

  The user says if 10 can be made to work well, then we can go back to 7 or 8.

  Please notify.

  Thank you for your time.

  Seems to have been resolved in re - install the software HP Simple pass then go and reconfigure the settings. Message no longer appears on 10. User LT installed with 7 however. Best decision.

• Qosmio F16 - 14Q - internet USB device showing! in the Device Manager

  Hello

  "my USB device that connect to the internet does not and I wanted on this subject in the Device Manager, it appears under the drive of cd-rom and other two devices below the CD with"! "sign and then I removed the cd-rom drivers.

  Can some give me a link to download the cd-rom driver and help make my USB device work?
  On the drivers, I didn't know my kind of Qosmio in the driver list, he writes back the Qosmio F16 - 14Q.

  Please help me

  I put t know what USB device do you use but if it doesn't work, you must have the driver for this device of some. Part material Toshiba doesn t support third so try please talk with your internet provider and ask for help.

  Another thing: I put t know where you bought your Qosmio but I assume it has been offered to Pakistan. The right support page should be http://asia.toshiba.com/pakistan

  As far as I know, optical drive uses the standard Microsoft driver so that you won't find a driver for the CD-rom drive.

• Re: Satellite L40-139 - 10 error code in the Device Manager on the wireless network card

  I have a toshiba satellite L40-139 and I just instaled windows 7 64 bit on it. Since that time my atheros wireless device will not work. I tried updating the driver and windows but nothing.
  In the device manager says code 10 DEVICE can NOT START.

  Help, please!

  Thank you!

  Hello

  If you read here:

  http://support.Microsoft.com/kb/943104

  The Code 10 error code is generated when the Device Manager has not enough information or error that spread upwards by device drivers is not recognized by Device Manager.
  Then, go to the page of the driver and update the driver. If you do not have to win 7, try the vista driver.

  Welcome them

• Satelltie M40X: NIC disappears from the Device Manager

  I have a Satellite M40X with Windows XP SP2 and my card (Realtek gigabit) network is no longer seen by Windows (or Linux: test performed with a Ubuntu live CD).

  The lan card is not seen by Toshiba HW Setup. I disappeared 2 days ago, was back yesterday that a d is not present today...
  LAN card is enabled in the BIOS.

  Can someone help me solve this problem?

  The PC is 13 months (out of warranty Toshiba...)

  Some registry keys are damaged and so the LAN card is not visible in the Device Manager (very possible) or the LAN card is damage (more)

  I think you should try to reinstall the operating system. If after installing new network card is not visible in device (such as unknown device or network card) Manager then it s a bad material work and in my opinion, that the replacement or repair will help.