Effect of dust particle

Similar Questions

• dust particles SE iPhone under the lens of the camera back

  Hi all

  I have my iPhone IS for about 5 days now and 2 days ago, I've already noticed a few dust particles under the lens of the camera back.  Went to 2 and yesterdays Apple store or 3 units of demonstration of different colors were particles of dust under the lens too.  I want to just ask if anyone of you guys this?

  You would need to take it to an Apple store, to do clean out or replace. Don't try to clean it yourself.

• AE not made of the effects of the dust

  In my computer, I have some gold particles 'dust' and dust particles that just float around. As I rub through the movie that they're there, but when I go there is no dust at all in my scenes.

  No clue as to what could be the cause?

  Thank you!

  UH... try to apply the effect to a layer solid instead of an adjustment layer. (Copy and paste to avoid losing your settings). An adjustment layer is planned for when you want the top effects to change the lower layers (levels, curves, etc.). You don't want to use it to generate effects such as advanced Flash, lights, parasites, particles, etc.

  grogbro wrote:

  Hmm, I think the CC AE I would update on its own, but maybe I need to go through and update. I have the monthly subscription, so I thought it would be automatic

  2014 CC is not a CC update; It's a brand new version of the software. AE version 12.0.0 would update to 12.2.1.5 as yours did, but you have to separately install the AE version 13. You will have 12-13 installed. (Or, as are called CC CC AE and AE CC2014 software.)

• I've got dust under my camera lens cover!

  So, as I said, I have a few dust particles under my rear camera lens cover (the small round glass piece located at the back of the phone, covering my cam). I think that's it through the microphone next to the camera, but I do not know how to remove it. Really annoying, so far I did not any impact on my pictures, perhaps, they got a little more blurry...

  I still have the warranty for my phone (iPhone 5 s btw), but I have a tiny crack loosed on my screen, just next to the home button, so I don't know if they will clean it free of charge in an Apple Store, we all know Apple... Any suggestions guys?

  Hi aimware.exe,

  Thank you for using communities of Apple Support. Certainly, I understand your concern with the dust particles and hairline crack for your screen. Looks like your phone will need to be examined to determine the best option for that to be resolved.

  Use this link to find the service options in your area.

  iPhone Service answer Center

  Have an amazing day!

• Dust from under the display screen blackBerry Smartphones

  He started without notice, but is now a nusance. The dust particles are piling up under the screen at the top and in the center of the screen. It is no longer visible when the display shows a background darker and in full sun. Is it possible to clean it?

  Barrycuda,

  Had the same problem with my first storm.  Unfortunately, there is no way to get the dust off can compressed air, vacuum, etc.  And once it starts it doesn't stop as if by magic.  I suggest take it to your business and get a replacement/new device.  Some people have tried to burst the screen goes to find that they crack then their carrier does not replace because they broke up it. Save yourself the headache and just bring it back.  At your made in the Canada?  Mine was and I read on several other forums that there were problems of productions with Canadian manufactured devices.  You can tell by popping the battery.  It says it on a sticker under there.  My replacement was made in the Mexico... no problem with this one.

  See you soon,.

  G

• . Files OBJ in After Effects

  I loaded this .obj file in After Effects and animated particles around it. I made a short clip to see how it would look, and it was released as the 2nd picture. Zoom in.

  What I've done wrong? I do not understand why it came out so zoomed in. I have not yet finished with letters and animations were now, he won't look right after rendering.

  Advice would be very appreciated. Thank you.

  

  PS: This is what the logo REALLY looks like, but so far, I was unable to use this nice 3D model in any other program.

  

  3D is the best way to make 3D .obj files in After Effects.

  Item 3D - advanced materials - YouTube

  https://www.VideoCopilot.NET/products/element/

  http://www.VideoCopilot.NET/help/element/

  http://www.VideoCopilot.NET/help/element/tutorial/basic/element_3d_introduction/

  hahahahahahaha!

• Using Timewarp on the effects of motion tween...

  I use Timewarp to set the speed of a layer that contains interpolated motion effects (ie. the particles). For some reason any Timewarp is treat the 29.97 FPS and using its vector of mixture layer as regular sequences to interpolate the images (creation of unwanted distortions).

  Ultimately, I intend Timewarping single layer prior comped that contains many layers of different effects (including optical flares, Element, etc.).

  Is there a way to get just Timewarp recalculate and re-tween the query instead of doing it's usual vector mix thing?

  -Pete

  Is there a reason that you use Timewarp on the precomp instead of time-remapping?

• question on the layer effects and filters - Jews Becker

  Hello

  I have a question about the layer effects and filters

  first is there a way to layer effects in flash (as in photoshop 'coup' "outter glow" etc...)

  so it is a kind of plug-ins to special effects - perhaps with particles or pretty effects that I can buy

  Thank you very much!

  (as you may have guessed I'm very new at this and appreciate all the advice I can get!)

  -Jews Becker

  You won't find anything exactly like filters in Photoshop for use in Flash. There are filters in Flash. They are available at the bottom of the Properties window for an object MovieClip or button on the stage. Alternatively, you can apply and animate a filter in Actionscript. There is a good third-party developer, http://www.greensock.com, where you can find a few effects tools very useful. Most are free.

• Transparency effect

  OK, this should be a simple to make up for my last post. When I add an effect (bubbles, foam, particles, etc.) to my video clip, the clip is therefore more visible due to the effect of overlay. I tried to add the effect to an adjustment layer, change the blending mode etc so that I can see the underlying clip, but still resembles the night for me! Any help would be appreciated. Thank you.

  Yes, foam is unfortunately one of the effects that can be applied directly. Just create a new solid (Layer--> New--> solid) and apply the effect to it, then put your original footage below. You can always reference as a map of the environment or texture in the section of rendering the effect to get the correct thoughts and use parts of the image as the color of the bubble.

  Mylenium

• My t420s runs at a normal temperature?

  I just bought a used thinkpad t420s and I was wondering if it is overheating or running at the right temperature. The CPU is idling in the middle to low 50 (degrees Celsius) and will reach 95 degrees Celsius 95 premium running. When running a virus scan and watch a video YouTube the chip works in the high 80s. Is this normal? According to Intel, the max temp allowed is 100 degrees Celsius. I have all the power settings for maximum performance. Here is a link to my http://ark.intel.com/products/52231/Intel-Core-i7-2620M-Processor-4M-Cache-up-to-3_40-GHz chip

  I could mention that using TPFC.63 I always get the top fan then the bios will control them, so I think the TEPS is normal, because bios would probably spooler fans at full power if the system was about to stop from overheating.

  Hi Daniel250,

  Welcome to Lenovo Community!

  According to the application, we realized that the problem with the system is overheating on your ThinkPad T420s.

  The normal temperature of 72 degrees centigrade CPU and GPU at 68 degrees centigrade is in the safe temperature range.

  If you feel that your laptop is hotter than usual, clean the vents and fan through the use of a fan pump to remove dust particles stuck in vents and it also perhaps with thermal paste between your radiator and the processor core can have exhausted. You might want to make a good thermal paste and apply on the processor core to ensure the best heat transfer property

  I hope this helps.

  Best regards

  Agnes Kumar

• Motorcycle 2nd Gen face speaker tips.

  We know that front to second generation of Motorola devices stereo speakers are very good. There is something that you do not know it.small dust particles can accumulate in the ditch of speakers. Clean your speaker at least 2 times a week with smooth thin dry brushes. Keep away from water as it

  It is only the tip of the maintenance.

• How to check that my T410s has indeed replaced fan?

  Hello world

  I sent my T410s to a small store for replacement of the fan. They said they would replace the defective one with a "new" one.

  I got back from the shop, but I want to check to make sure that the fan is replaced by a new fan rather than the current one.

  Without disassembling the laptop, how can I check that the fan is a new / different precedent that comes with the laptop when I bought it?

  Thank you very much

  There is no easy way to check if the fan is replaced or not, since there is no unique serial number to identify the part that you can follow.

  But you can remove the keyboard and check to see if fan impeller has any dust on it or not. Old fan will have a few dust particles stuck to the surface, even when they are cleaned, new will have a waxy surface own palettes.

• question about cleaning the sensor of the A57

  Dear community of Sony,

  I have several questions about the cleaning of the sensor of the A57.

  Recently, I noticed several dark specs appearing on images when shooting at low opening (F20, F22), especially when there are high for them (like the sky in a landscape photo) contrast. To my knowledge, I've categorized as possible of dust on the sensor. I have read the section of the manual about cleaning the sensor and followed the procedure. However, the problem remained. I have previous experience with cleaning of the more resistant the probe of a Sony NEX dust particles, so I applied it to the A57. I used the specialized sensor cleaning tools combining two parts kit - wet and dry. Noted little dust on translucent mirror as well, so I cleaned up afterwards. Later, I considered this mirror could have some specialized coatings.

  So my first question is: should I have done some permanent damage the mirror or the sensors? Currently, the camera works OK, although some features of dust still remain. It seems that I had pushed some of them to the edges of the sensor.

  I'm not so happy with the tool that I used. I'm thinking about this one for a more thorough cleaning:

  http://www.digitaltoyshop.co.UK/Eyelead_sensor_cleaning_kit_SCK-1_Sony_Alpha_A57_t2836_6789

  It is marketed as a tool for A57. Should I use it?

  Thank you in advance?

  Best regards Angel Marinov

  PS: I'm really happy with my Sony A57 and the NEX. They made me a fan of Sony. So, I want to use this topic to also say thank you to the developers of Sony.

  Hello Angel!

  Read the following steps carefully and let us know if you have any other questions.

• Cleaner

  I am a new owner of a used 60 d which had approximately 5600 shutter events when I bought it. The seller says camera has never been used in wet or dusty conditions, and I won't either.

  In view of the foregoing, how many times it is generally recommended to have this type of appliance cleaned by a repair station professional?  Or not?

  You can buy a Rocket Blower or similar thing squeeze-bulb and do a good job of cleaning of dust on the sensor yourself. Just set the mirror lock up the mirror and the breath of the probe with the air.   It will not clean a really dirty or spotted water sensor, but it helps with the large dust particles.

  If you do not live near a place good service you can also learn how to clean your sensor.  I don't like to mess with wet cleaning methods, but I found one of the tools sticky thing-on-a-stick works perfectly, combined with a pen sensor and a sensor loupe.

• Open old files on A:

  I found an old floppy drive with some clip on what I would like to recover.  Under my computer, he offered to reformat the drive hard when I tried to open it.  Under properties, named the files in RAW format, it has no list.  They may have been created in 98.  Is there an any hope to recall these files?

  Hello

  1. what kind of floppy drive is it? What is the total capacity of the disk?
  2 are you able to use this floppy drive on another computer?
  3. have you checked if the floppy drive works well?
  4. What is the file system on the floppy drive?

  I ask you to copy the data to the computer and then check. Also, try to use it on another computer and see. As you are prompted to format the drive, it is possible that the data is corrupted or the disk is physically damaged with dust particles.

  I hope this information is useful!

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.