Effect of pixel-walk Satellite Pro A200 - 20 M

Similar Questions

• Cannot ping localhost - error code 2 on Satellite Pro A200

  Dear COMPUTER gurus,

  I have a portable Satellite Pro A200.
  When I ping the local host, it says could not contact the pilot of intellectual property, error code 2.
  I tried to fix the winsock using articles from microsoft without success.

  Now I want to reapair the operating system using the recovery DVD.

  The recovery DVD has a repair option?
  If this isn't the case, anyone how to solve this problem?

  Help please!
  This is the result, I was using the pc diagnostic tool.

  Date 2008-08-30 01:47:12

  [Information on PC]
  Model name Satellite Pro A200
  Part number PSAF4U - 004 00D
  Serial number Y7312740Q
  Version of the OS Microsoft Windows XP Professional 5.1.2600 Service Pack 2
  BIOS Version 1.70
  Processor Intel (r) Core (TM) 2 Duo processor T7250 @ 2.00 GHz
  RAM 1024MB of physical memory
  Disk capacity hard 120,031,511,040 [bytes] 111.788 [GB]
  Capacity of the hard drive space free 92,245,069,824 [bytes] 85.910 [GB]
  Version Mobile Intel (r) 965 Express Chipset Family video = 6.14.10.4833
  Screen resolution 1280 x 768 Pixels
  Color quality, true color (32 bit)
  Audio version of Realtek High Definition Audio = 5.10.0.5440
  Network Marvell Yukon 88E8039 PCI-E Fast Ethernet Controller = 10.14.6.3 version = MAC address
  Intel (r) PRO/Wireless 3945ABG Network Connection version = 11.1.0.100 references MAC address =
  TOSHIBA Software Modem Modem version = 2.1.77.0
  Version of the IDE Device 1 TSSTcorp CDDVDW TS-L632H FW = TO01
  Interface IDE 2 no
  Interface IDE 3 no
  Interface IDE 4 no
  IDE Device 5 Hitachi HTS542512K9SA00
  Interface IDE 6 no
  Internet Explorer 7.0.5730.11

  Hello

  > I tried to fix the Winsock by using the Microsoft s articles with no luck
  I guess you're meaning to this MS article knowledge base:
  [How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP, and in Windows Vista: http://support.microsoft.com/kb/811259]

  Well, I searched a bit around and discovered that the solution described in article 811259 doesn t help in all cases

  So searched the Web of the 3rd party site and someone has suggested to try these tips.
  It s also from Microsoft:
  * [How to reset the Protocol Internet (TCP/IP) in Windows XP | http://support.microsoft.com/kb/299357] *.

  So check it out maybe it helps

  If not, then you may be forced to reinstall your operating system, because the repair option is not included in the Toshiba Recovery CD ;(

  Concerning

• No AHCI in the BIOS in Satellite Pro A200

  I just installed an ssd and would like to change the bios to ahci utility but it is not an area that I am able to do this. the computer is a Toshiba Satellite Pro A200 (psfa1a-003002).

  I have to update the BIOS? Where can I get the update and how can I update?

  As I know the BIOS update does not offer some additional options. Please check the settings of the BIOS again. In the BIOS options there SATA advanced option and there you can change between compatibility and AHCI mode.

  I have it on my P200. It is almost identical machine but 17 and your model 15.

• Where to find info on the Satellite Pro A200 PSAF0A

  I have an A200 Satellite (Pro), number PSAF0A - 03M 019 and so far have NOT had the chance to get the info on the site of Toshiba on this machine, it seems lost as Toshiba is concerned.

  When you use the menu support it rejects serial number or part of the bottom of the machine and there is NO option for the part number in the drop-down list.

  I don't have drivers that I've sorted myself but, I would like to know what BIOS version it is supposed to take, he had originally version 1.20 but my client upgraded to 5.20 and there is no setting in the BIOS to enable the AHCI.

  All I want to do is find some info on this machine, but I didn't do anything but run into dead ends with so-called support Toshiba. Any help I can get would be appreciated.

  Thank you

  Hello

  > I don't need drivers, I sorted it myself, but I would like to know what BIOS version it is supposed to take.

  The newest BIOS is on the page of the Toshiba driver so take a look here
  But no one version of BIOS for Satellite Pro A200 or other A200 series contain the AHCI / compatible mode.
  The controller is still on AHCI. This can be on that other series laptop.

• Operating system to load BIOS for Satellite Pro A200

  Hello

  I have a PSAE4E - 03300WEN Satellite Pro A200 with V5.30 BIOS and Windows 7 SP1 32 bit.
  I improved the T2330 CPU to T8100 and thought to update the BIOS for increased functionality.
  But in the Toshiba download page, I get the following 3 options:

  2.60 - WIN32 this Bios is only compatible for portable computers with Windows Vista! (32-bit only!)
  2.60 - WIN64 this Bios is only compatible for portable computers with Windows Vista! (64-bit only!)
  5, 60 - WIN this Bios is NOT compatible for notebook computers equipped with Windows Vista!

  And the question is...
  What about Windows 7? I should stick to V5.30 or go to a newer version? :-/

  See you soon!

  > I improved the T2330 CPU to T8100 and thought to update the BIOS for increased functionality.

  First of all laptop manufacturers (any manufacturer it is) don t support CPU updates.
  Of course, you can replace the CPU but it's your own risk.

  But what I mean is that updates of BIOS don't provide additional functionality or improves which would increase the functionality after upgrade CPU and this means that the BIOS update is not necessary to obtain better performance even after upgrade CPU.

  However, certain phrases on your BIOS question:
  5.60 BIOS seems to be released for portable computers running Win XP:

  Other versions of BIOS (v2.60 32-bit and 64-bit) are released for Vista systems I guess that this version should be compatible with Win 7 since its more similar to Vista to Win XP

  However, you changed the processor and consequently the hardware configuration is different now, I can't say for sure if the BIOS update would be the best option in this case

• Matte screen disappeared on Satellite Pro A200

  I have a Satellite Pro A200 which works fine on an external monitor, but is very dull on the laptop monitor.
  Anyone knows if it's backlit and if the lights are replaceable, or do I need a new screen?

  FN + F5/F6 does nothing. Correct brightness with the software works on the external monitor, but not on the laptop.

  Thank you

  RickC

  > Is - anyone knows if it's backlit and if the lights are replaceable, or do I need a new screen?

  It could be a FL. inverter problem In the worst cases the problem internal display, but at this point, I suppose that it s inverter malfunction only an FL.

  Recommend trying to replace the FL inverter first, since this part is much less expensive than a screen.

• Satellite Pro A200 - drivers need Win7 & feature keys FN

  Hello

  I have little problem with my Satellite Pro A200-29N. I installed him win7 and now I can not find drivers (only completed ValueAddedPackage).
  Seconds are the keys FN they does not work:(befor j'ai WinVista)

  Old laptop as your SP A200 models works perfectly with Windows 7 32 bit OS.
  I checked the download page of Toshiba and Toshiba complete offer of assistance for Win7 32 bit, but not for the 64bot version.

  I assume you are using the 64-bit version, right?

• Satellite Pro A200 failing to connect with iphone via wifi hotspot

  My apologies if I get some of the jargon wrong, but I'm pretty useless when you want IT emits.

  I have a Satellite Pro A200 and had problems connecting to various wifi connections.
  The computer could see the wifi connection and connect to it, but I wasn't able to connect to the internet.

  The question of the Office was arranged by our IT support guy (security settings on the new router we too complex for my PC or something like that), but he has not been able to solve the problem of not being able to connect to my iphone to use the 'hotspot' via the wifi function.

  Someone there knows a way to solve this, or is it a simple fact of the laptop is too old and really need to update?

  Thanks for any help that anyone is able to give.

  > Someone know a way to fix this or is it a simple fact of the laptop is too old and really need to update?

  This isn't a question of the age of the laptop
  As far as I know not that support all mobile operators
  You should first ask your mobile operator if you can use the tethering service.

  If this would be supported in my mobile operator, then connect the iphone to the laptop first
  So that you have two options: you can use the BT connection (in this case check if computer laptop also supports BT) or via a USB cable that came with the iPhone.

  (PS: as far I know to attach is supported by iOS3.0 and higher)

  After that the iphone was connected to the laptop, you must activate the tethering on iphone.
  Under settings of-> network, you should see the option internet tethering it must be enabled.
  Now you should be able to see that in the Network & Center sharing control panel.

• Satellite Pro A200 - hard drive has lost half it's memory

  I have a toshiba Satellite Pro A200 on Vista. Vista came preloaded and I not all disks for it. I got it from the new (Sept 2007). The hard disk is divided into units. Recently my C drive has filled competely and I now no space left (went 55gigs) I store some data in this drive. All my multimedia elements (music, photos, and other files) is in my E drive. I have to run C Cleaner whenever I start in order to have enough space for the operation of the computer. I also remove all but the last restore point in order to function.

  I am at my wits end and think I must have a virus or something. Is there a way to restore the computer to the 'new '? I have all my files backed up on an external hard drive, so I don't mind from scratch. Not keeping in mind I have no install discs as Vista came preloaded.

  Can anyone help? Please, I beg you!

  Hello

  If you don't have a recovery disk, you can order from Toshiba for the money. Otherwise, you can get copy of Windows and installed with the drivers of Toshiba (http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp)
  Then, you mentioned that hard drive has lost half it's memory, tell you if it was ok before but not available? Please check disk management, utility of the Panel. What is shown here?

• Satellite Pro A200 - shows only 3 GB instead of 4 GB of RAM

  Hello

  2 years ago I had a Satellite Pro A200 as a professional laptop and it works with XP SP2, later with SP3. With 2 GB, it shows 2 GB memory in Windows - and I know it's a Radeon 7500 with 256 MB memory graphics individual, and there is no shared memory.

  I upgraded to 4 GB, but Windows shows exactly 3 GB. BIOS shows 4 GB and ATI system monitor shows 4 GB. I know that 4 GB is not possible under XP 32-bit, only on Windows 2003 R2 32 bit or Vista - but on desktop systems, I've seen values between 3.3 and 3.7 GB.

  So, where's the memory? It looks like a bug - the chips of memory have two 2 GB I checked this. Because it's a company laptop I can not just switch to 64-bit XP :-(

  There's no option in the BIOS - first I thought that it is the graphics card, but mine has independent graphics with own memory so that the computer comes up with MB 2048 or 4096 after the upgrade.

  Shared memory would show about 1900 MB of RAM for the operating system as my private EEEpc.

  Hi shadowmaster_1,

  > I know that 4 GB is not possible under XP 32 bit
  Then why do you ask this question here if you already know? Moreover, it s not a limitation in XP, it s a material limitation on all 32-bit systems

  > only on Windows 2003 R2 32 bit or Vista
  And who says that Windows 2003 or Vista can use 4 GB? Okay, there's an update for Vista where 4 GB correct displayed in system properties, but that doesn't make no difference. Vista 32 bit peut t use all of 4GB, it s only cosmetic improvements! ;)

  > So where is memory?
  Memory is installed on your computer, but can t be used complelty with a 32 bit OS.

  At the end of the story: If you want to use 4 GB, you need to install a 64 bit OS. On all the 32 bit OS, you can use only upward to ~3.2GB RAM!

• How to restore settings orginal Satellite Pro A200?

  Hiya people

  I'm new to this thing, but if anyone can help me with my problem, I would be very grateful.
  I have a satellite pro A200 which is about 2.5 years and is now running really slow and I was just wondering if it can be restored to its original default? But isn't any recovery disk that I saw on the web that if you hold the zero button while turning on the computer you get the recovery of HARD drive, but for some reason page any, that this does not happen, I also tried several thing but no seams to work.

  If anyone out there can help me I would be very grateful

  Thank you

  What you have found on the web is not relevant for all models of Toshiba laptops.
  I can't say with certainty, but most A200 notebook recovery DVDs has been in the area.

  Anyway, first tell us the exact laptop model name and model number.

• Satellite Pro A200: How to create Dual boot; Vista & XP using the recovery CD

  I just bought a laptop Satellite Pro A200, which was supplied with the product for Vista and XP Recovery discs.
  The license specifically Vista also XP licenses.
  Can I set up a dual boot so that I can boot to Vista or XP? If so, how?

  I would also like a third boot, Red Hat Linux 9.
  Any comments?

  Hmmm. Usually it s possible to use two or more operating systems on the computer, but as far as I know the Toshiba Vista recovery CD formats whole disk when installing Vista and this will lead to the loss of the OS installed.
  I m not 100% sure on the recovery of the newest XP CD called RECON doesn t CD include an expert mode which allows to choose between the different partitions.

  So I guess that each use the recovery CD will format the HARD drive and erase the installed data. But of course, you can try to install the two BONES and to check if the restore XP CD allows to choose the second part of the installation of the OS.

  If it does not, it seems that you will need to an original XP from Microsoft CD or the original CD of Vista to use the two BONES.

  Best regards

• Seeing white on Satellite Pro A200

  The screen of my computer (Satellite Pro A200 - PSAE7) became white and will not normalize. This happens as soon as the boot. However, other processes are underway normally. Currently, I have to rely on an external monitor or LCD projector to allow me to continue my work.

  What could be wrong and what can do?

  Hey,.

  > Currently I have to rely on an external monitor or LCD projector to allow me to continue my work.
  This means that an external monitor works properly, no?

  Well, there are two possible reasons: either the internal LCD screen is defective or LCD cable but the graphics card and the software are ok if everything works on an external monitor.

  You see a picture if you move the internal screen a little? So, you can check if there is a bad connection. If you are familiar with the disassembly of the laptop, you can open Notepad and check the connection also.

  An alternative you can also ask a maintainer approved assistance. Disassembly of the laptop is not a problem for guys so just get in contact with them. ;)

• Satellite Pro A200 - Power LED lights in pink

  Hello world

  Lit up power has LED (2nd right) on my satellite pro A200 (PSAE4E-00T004EN) pink solid when it should be blue. It doesn't seem to be any other problems though, just the pink led.

  What it means and why it was on solid rose?

  I looked in the forum and all other Toshiba and technical sites that I can find, there is no mention of what I see in the manual either, and unfortunately I have not yet found an answer.
  I turned off, unplugged and rebooted, but no change.

  Thanks much for any help.
  RD

  As far as I know, satellite Pro A200 is older model laptop so I want to know is this Rose LED from the first day or what?

  As far as I know when the laptop is on which led should be blue, but when the laptop is in stand-by mode it flashes yellow or pink maybe on your laptop.

• Satellite Pro A200 does not recognize the hard drive, XP Pro

  When I try and load XP Pro SP3 (32 bit) it will not install because it doesn't have SATA drivers. I downloaded the drivers and have an external floppy drive to install drivers by pressing F6. My question is the machine is listed as 64-bit and XP Pro is 32-bit. Choose the drivers ICH8M 32 or 64 bits. IE is the 32 or 64 bit on ICH8M see hardware or operating system. Computer's Satellite Pro A200 PSAE4E-01700WEN.

  Any help appreciated

  Dave

  Hello

  If you are using the 64 bit OS, then also use 64-bit drivers.
  I found very nice HowTo from Toshiba.

  Check it! It s certainly interesting and should be useful.

  * + How to integrate a SATA AHCI driver into a Windows XP Setup CD + *.
  http://APS2.toshiba-tro.de/KB0/TSB85017Z0000R01.htm