How to restore settings orginal Satellite Pro A200?

Similar Questions

• How to identify wireless LAN Satellite Pro A200?

  I have a Toshiba Satellite Pro A200 1MA-00J00DRU.

  How can I know what wireless LAN adapter, I?

  Hello

  You can install a software of digitization of material like Everest home edition.
  Or you can check the device id.

  In-WLan card properties-> details > Device Manager, you can find something like this: PCI VEN_8086 & DEV_4229
  PCI VEN_8086-> manufacture ID
  DEV_4229-> device ID

  Here you can search the s ID ;)
  http://www.PCIDatabase.com/

• How to upgrade drivers for Satellite Pro A200?

  I installed Windows 7 on my Toshiba Satellite A200 (psfa1a-003002). And want to update all the drivers for it as well, but I can t seem to find new drivers for it online. Is there a place I can go to find them, or was it a disc that came with the computer that had the Toshiba Utilities who handled the updates that I can download.

  I am not the first owner of the computer so no disk came with it.

  I can see is the Australian model laptop so if you need drivers you can download on http://www.mytoshiba.com.au/support/download
  I hope that this old A200 is supported for Win7 there is no old or new drivers. It is supported and you can find the drivers, tools and utilities, or you will not find them.

  In any case, this old piece of equipment works fine with the drivers included in Win7 and after that Win7 updates installation (optional updates).

• Need help to restore the Satellite Pro A200-1JO to factory settings

  HI, my mother sells his laptop and asked me to wipe it clean for her so im trying to restore to factory settings with a new installation of the operating system etc. Do not have a recovery with disk and I tried to go through the advanced boot menu now F8 during start-up. Nothing works here are the details of any help would be appreciated.

  Satellite Pro A200-1JO
  Part number: PSAE1E-01H008EN
  Main features
  -Intel® Celeron® M processor 520 (1.60 GHz/533 MHz front side Bus / 1 MB of level 2 cache)
  -Windows XP® Professional
  -9 cell battery with more than 5 hours of battery life
  -Drive DVD Super Multi (Double Layer)
  -Screen 15.4 "screen TruBrite® WXGA TFT 1 280 x 800

  > Have a recovery with disk and I tried to go through the advanced boot menu now F8 during start-up. Nothing works here are the details of any help would be appreciated.

  You can use the recovery disc or HARD drive recovery.
  If recover HARD drive does not work and if you n t has the disc then you could order it here:
  http://backupmedia.Toshiba.EU/landing.aspx

• Restore the partition from the Satellite Pro A200 recovery

  Hello

  I accidentally deleted the 5 GB recovery partition on my Satellite Pro A200. I have since recovered (and the data inside) and tried to create my discs of recovery using the "Recovery Disc Creator', but it is to say that it cannot find the recovery partition :(

  I tried fishing by the ini files for recovery disc creator find where he seeks the score, but could not find anything...

  One thing I noticed is that now it is recovered, it appears as a NTFS fs (I think that before it was an unknown FS type?) and volume label "HDDRECOVERY".

  Any ideas on how I can either:

  (a) wrong recovery tool by using the recovery partition
  (b) to make the score look exactly as it did before I deleted it, so I can use the tool as it is.

  Would really appreciate any help - want to make these recovery disc for my vista ultimate before I go around whacking backtrack top :) and dicking

  your

  Frank

  Hello

  > accidentally deleted the recovery partition of 5 GB on my Satellite Pro A200. Since I got (and the data inside)
  I wonder how you restored the deleted partition. Perhaps the recovery settings partition are not the same that before and, therefore, the "Recovery Disc Creator' doesn t work properly.

  Unfortunately, I think you will not be able to fool the recovery tool, if the recovery partition cannot be found.
  You can rename only the partition NTFS FS. This can be done in the disk management console.
  But I don t think this will solve this problem.

  It seems that you have to reinstall the whole OS using the CD of restoration of Toshiba or the original CD of Microsoft Vista

  Good bye

• Satellite Pro A200: How to create Dual boot; Vista & XP using the recovery CD

  I just bought a laptop Satellite Pro A200, which was supplied with the product for Vista and XP Recovery discs.
  The license specifically Vista also XP licenses.
  Can I set up a dual boot so that I can boot to Vista or XP? If so, how?

  I would also like a third boot, Red Hat Linux 9.
  Any comments?

  Hmmm. Usually it s possible to use two or more operating systems on the computer, but as far as I know the Toshiba Vista recovery CD formats whole disk when installing Vista and this will lead to the loss of the OS installed.
  I m not 100% sure on the recovery of the newest XP CD called RECON doesn t CD include an expert mode which allows to choose between the different partitions.

  So I guess that each use the recovery CD will format the HARD drive and erase the installed data. But of course, you can try to install the two BONES and to check if the restore XP CD allows to choose the second part of the installation of the OS.

  If it does not, it seems that you will need to an original XP from Microsoft CD or the original CD of Vista to use the two BONES.

  Best regards

• Satellite Pro A200-PSAE4E - what BIOS I need for the update and how?

  Please on A) the correct updated version needs to B) process

  (A) the machine came with Vista installed, but it has been ranked towards the bottom to XP works on Win2003/XP network.

  The current bios to V5.20 do update to 2.60 - win 32 (vista) or win 5.60

  (B) Toshiba FAQ - FAQ ref: TRO0000000b07 shows how to upgrade the bios unfortunately it does not list the satellite Pro A200 - then what is the procedure - thanks in advance.

  Hello!

  If you want to update the BIOS, you need version 5.60. Are the other version for Vista and 5,60 only one is for XP and if it s the right one for you.

  The BIOS update procedure is quite easy. The update is based on Windows, which means that you can update it on Windows. So to extract all files from zip archive and run the exe file. Then updated your BIOS.
  But before update you, close all programs running even your AntiVirus and firewall and connect the AC adapter.

  Good luck!

  Good bye

• Satellite Pro A200 - 1 MI: how to re-enable the touchpad

  Hello

  I recently bought a new Satellite Pro A200 - 1 MI (psae7e). Thing is that while I was using it at the start there was this allocation at the beginning which allowed us to use the shortcut keyboard (fn + keys) on the screen.
  It was at the top of the screen.

  So I clicked on the tab to disable my touchpad but now I can't seem to activate the touchpad and accidentally closed this keyboard shortcut help too.

  So all tried to re-enable the touchpad; reinstalled driver, tried to install the touchpad power and everything...

  Please help me.
  If there are questions to ask...
  I really hope that someone could find an answer for me.

  Thanks in advance,
  Sabil

  Hello Sabil

  You can restart Flash cards: start > all programs > Toshiba > utilities > settings for Flash cards. Open these settings and clear the check box in front of the option to disable.
  I hope that you will be able to use Flash cards again.

• Satellite Pro A200: How restart after hibernation

  I must be a fool.
  I put in power button new Satellite Pro A200 to activate the Hibernate.

  Then set the BIOS password. Despite the password entered correctly, it won't start windows.
  And can't stop laptop holding down the power button to force the reboot.

  Then
  (1) how to restart short waiting until the batterys flat roll... And
  (2) when and if I get a reboot, which key (s) should I hold down to get into the BIOS.

  Thank you much for the help.

  > Despite the entered password correctly, it won't start windows.
  > Nor can I stop laptop holding down the power button to force the reboot

  You have a Phoenix BIOS? If yes then you have to press the F2 key immediately after the laptop starts to access the BIOS. But you will not be able to access the BIOS, if the password is not right and cannot be verified.

  The unknown BIOS password can be removed only by an ASP in your country. There is a special procedure that is known only to authorized Toshiba service technicians.
  Therefore, follow the recommendation and contact guys!

  PS: The laptop must stop when you press the power button for about 4-5 sec.
  If not, unplug the AC and the battery to turn off the computer!

• Satellite Pro A200 how to get a Vista 64 bit of Toshiba Recovery disk

  I have a portable satellite Pro A200 computer and I would like to install Vista 64-bit.
  As I read it, you can use the 32-bit key to install the 62-bit version. Is there a way to get the "product recovery disc" in a 64-bit version.

  Or download it from somewhere

  Hello

  What OS came preinstalled on your laptop?
  If it's a 32 bit Vista OS, then you can only get a 32-bit Vista Toshiba recovery CD.

  If you want to install another OS, no matter if it of XP or Vista 64-bit, you must purchase the operating system of Microsoft.

  PS: as far as I know the key to series used for Vista 32 bit OS is only an OEM key and it does not work with other operating systems!

• Satellite Pro A200 - how to activate the new device LAN card?

  Hello.

  I have a Satellite Pro A200 and I replaced the card with an Intel 5100 (512AN_MMW) wireless and it detects OK and installs the drivers etc, but it does not work because he says that the switch is turned off on the front of the laptop. The switch is on I also tried pressing fn + f8, but it still does not work.

  The laptop is running Windows 7 64 bit

  Kind regards.

  Hi evo8.

  What card WLAN have you had before and do the work of a former?
  I think that it of difficult to say why it doesn t work but maybe this card is not compatible.

  By the way: do other FN keys FN + F8 work or simply not?

• No AHCI in the BIOS in Satellite Pro A200

  I just installed an ssd and would like to change the bios to ahci utility but it is not an area that I am able to do this. the computer is a Toshiba Satellite Pro A200 (psfa1a-003002).

  I have to update the BIOS? Where can I get the update and how can I update?

  As I know the BIOS update does not offer some additional options. Please check the settings of the BIOS again. In the BIOS options there SATA advanced option and there you can change between compatibility and AHCI mode.

  I have it on my P200. It is almost identical machine but 17 and your model 15.

• Satellite Pro A200 - Webcam stop working after 10 to 15 minutes

  Hello

  I need help to solve this problem. I use the Satellite Pro A200 with Windows Vista. When I use my computer online my web cam stop working after and never restart again until my computer restarts.

  Please send me some suggentions how to solve this problem.

  Thank you [email protected]

  Hello

  How did you notice this problem? You get an error message or something else?

  It's really hard to say why this happens, but first I would try to update the driver for the webcam. You can get the latest version on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Install the latest version and try again.

  By the way: you run factory settings or you have installed your own version of Windows?

  Welcome them

• Re: Satellite Pro A200: can I get the drivers of preinstallation discs?

  I have Toshiba Satellite Pro A200 (PSAE1E) with XP Pro.

  I made a mistake and tried to update the Realtek audio drivers, knit drivers, but does not show the Realtek HD Audio Control Panel to the top, not in the system tray, or in the Control Panel folder.
  I contacted Realtek, they gave me a program that analyzed my HW and then they said that my phone is not supported, I must ask the crazy drivers my manufacturer, laptops, Toshiba.

  I tried the drivers that were running [Toshiba - download drivers | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp] page, but those who did not work either.

  So, there is one thing I can do, if it is possible, how can I get drivers of Toshiba recovery disks, without having to reinstall everything again?

  Something like this is not possible. Recovery image is somehow the package, you can not only pilots.
  Have you tried to roll back the OS (System Restore) before you did this updates?

• Satellite Pro A200-16N: can I use the recovery CD after upgrade to Vista

  HII!

  IM thinking of upgrading to windows vista on my Satellite Pro A200-16N and I ran the pre-upgrade of windows vista from microsoft website and it says that my system will be in charge of windows vista so im ok about it.

  The problem is that if my laptop was to break or something like that at some point, will my recovery CD provided by toshiba to work always on the laptop with windows vista?
  They will return the laptop for windows xp or from my laptop has another operating system they will not work?

  Also...
  What's the deal with BIOS? : S
  I don't understand!
  If I were to upgrade to windows vista should I upgrade my BIOS before or after the upgrade to vista?
  As I download the new drivers before upgrading Yes?

  Thank you!

  The restore CD will of course work.
  The recovery CD will always set the laptop back to the factory settings. This means that the whole HARD drive will be formatted and the image of Toshiba will be installed.

  > What's the deal with BIOS? I put t understand!
  > If I were to upgrade to windows vista should I upgrade my BIOS before or after the upgrade to vista?
  To my knowledge, that this laptop was already shipped with Vista, so you need not update the BIOS if you want to reinstall Vista.

  Some series Satellite A200 needs a BIOS update if you want to use the XP.
  In such cases, it s advisable to upgrade the BIOS to version XP first, then install OS X.

  Best regards