LR5 printing question

Similar Questions

• Windows 7 64 - bit Macro printing question

  I have problems printing using a macro in an application called iNews (made by AVID) on Windows 7 64 - bit installed on new Dell OptiPlex 9020 s.

  I've simplified the macro to just {Ctrl + P} {enter} and mouse freezes, keyboard does not (only Ctrl + Alt + Delete), without ANY error messages in the event log.  If I press Ctrl + Alt + Del then Esc, I can get out of the macro and the print job actually ends.  I noticed that the print job is in the queue in the queue, but won't be released only when I press Ctrl + Alt + Delete.

  When I completed the steps manually, the computer is not locked and printing works very well. It's only when I use a macro to print.

  Here are the troubleshooting steps I took:

  AVID contacted and they attempted to help, but it's an OS problem.

  The macro works great on Windows 7 32 bit.

  RAN windows updates

  Updated drivers from Dell

  For PCL6 and PS drivers printing and I tried the drivers updated (but the problem occurs on more than one printer, even Microsoft XPS Document Writer).

  Performed a clean boot (same question at a session of boot)

  Similar macro created in Excel works fine.

  Started the spooler, deleted files in c:\windows\system32\spooler\printers and stopped the spooler

  Any suggestions will be greatly appreciated.

  Thank you

  Karen

  Hello Karen,

  Please keep us updated on the status of the issue.

  As you mentioned are printers on a print server, the question will be better suited to the audience of professionals on the TechNet forums.

  I would recommend posting your query in the TechNet Forums.
   
  TechNet Forum
  http://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  Thank you

• How to get better in the world of print (question General graphics.)

  I didn't really know where to post this I decided that the general section would be nice.

  Here's the thing: I know how to use Photshop, Illustrator, Flash and Indesign (and other adobe programs) BUT what I do not know or never know really about are printed.

  I still see a job every now and then you requiring to be printed loan or possessing printing experience.

  As far as I know about printing is bleeding (usually for business cards) and CMYK is for printing.

  So my question is: what can I do to be professional in printing? Most everything I do is for the web.

  Find out what...

  http://www.adobepress.com/Bookstore/product.asp?ISBN=0321304667

  I have the 1st edition and it is a good starting point.  You will get the overviews on the matrices of the resolution, different methods of printing, keywords and their meanings, etc..  I wouldn't type publications 'real world '.  Instead, focus on authors and people who are proven professionals.  There is so much to learn that he can easily become overwhelming.  The learning never stops.  Take your time and do things.

• El Capitan 10.11.6 printer questions

  Upgrade to 10.11.6. Now, none of the two Macbook Pro (mid-2012) will resume the printer (Brother MFC-J5910DW) wireless. Printer contacted Brother - works fine and connected to the WLAN and print with USB. ISP contact - no problem there. Printer compatible with wireless and El Cap re-installed printer use and checked that all the s/w and the drivers are up to date. Looks like a problem El Cap.

  Try to unplug the printer, wait a few minutes and then restart it.

  If you haven't already done so, try to reset the printing system.

  Reset the printing system - OS X El Capitan

• Printer question

  I am trying to print iron on and cannot find the mirror image of the printer. I have Officejet Pro 8600

  @dinmaxx

  If your printing software does not have the option 'mirror' of the image, you can return the image using paint > save the file under a new name > print the image.

  Rotate or Flip Image files and print - Mirror Image

  Where is the paint in the 10, how to open windows?

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• Thin Client HP T510 printer questions

  So we have thin clients. We have a local default printer installed for the administrator who "invades" on the "Default user" profile (which is great, that's what must happen) when we try to install a network printer:

  1. We disable the write filter
  2. We disable the security for the user
  3. We install the printer network under the user's profile
  4. We invited domain administrator credentials.
  5. We enter the identification information and properly install/test the printer
  6. We restart and allow the connection of the user (automatic)
  7. The printer is there, but it says "access denied, unable to connect."

  Key information:

  1. These thin clients MUST have locally installed printers
  2. These thin clients are not on the field, they are the default WORKGROUP

  This seems like it should be easy to make it work, but I can't seem to find a solution and I have worked on it for over a week now. Thanks in advance.

  Solution:

  Put printer driver software on USB stick and install locally via the setup.exe.  Do not use the software in windows, for some reson he has a problem with striking pilots from the network.  Running the driver software installation file locally worked like a champ.

• Adding a printer - question is I keep are asked and ID and password

  I have Windows 7 and I'm trying to add a printer.  The printer looks like it is added, but I can't access it because he keeps asking and ID and password and then a different password.  How can I disable this request because I don't have a password on my laptop.  Thank you!

  What make and model printer?

  It's connected usb or wi - fi?

  When exact is any required password and what is the exact message?

• HP Officejet 6500 E709n wireless - Scan to computer printer - question

  Hi all

  I'm trying to run a scan from my printer to my iMac 10.8.3 running.   When I go to select the computer, it says no scan options.   Now, I can run a scan of my computer without problem, but I would like to be able to do it directly from the printer.  Any thoughts?

  Thank you

  Rich

  EDIT: HP utility/drivers are installed.   Have downloaded automatically when I initially set up printer.   Don't know how to check the version.  I guess it's the latter.

  Hi rich,

  The software provided for Mac OS X 10.8 Lion mountain for your printer cannot scan of the façade, but only from Mac using picture Capture, preview or printing & scanning.

  You can find the software information and capabilities listed below:

  http://support.HP.com/us-en/document/c04510394

  So you can find the steps to scan using the provided solution:

  http://support.HP.com/us-en/document/c03550518

  Shlomi

• Print questions after the custom section changes using a printed code

  Hello

  We have problems with the order of the custom section. Please find below bottom

  1. we have a custom code to print sections customized specification associated with the material specifications

  2 this custom code developed 2.5 years ago and absolutely perfect job

  3. this custom code actually built XML sections customized the associated specification which is transformed into PDF using XSLT by extending the print features.

  Recently, we changed the order custom sections appear in hardware specifications. Once the order gets modified with the help of Admin-> Data-> custom section order Custom. New order got reflected in all the technical features without any problem

  But the custom sections do not print in the same order

  When we studied, we found the following

  1. printing order is fine when using the default print template provided by oracle

  2. printing order is not very well when we use our custom print template that uses our custom code developed 2.5 years back

  When we have investigated further, we discovered that any new record is created once the order has changed to print very well in the same order using our custom code

  But the old specifications that were created before the implementation of the custom section control do not print in the same order

  Debug us the solution, with the old card and discovered that code is return data in the old order and not in the order indicated in the specification

  We tried all the properties we could and noting works as expected for the old specifications and new specifications get the order appropriate under the new defined order

  None of the sub properties get the data in the correct order in the old specifications

  ICollection customSections = ingSpec.ExtendedAttributeSections.OrderedModifiableValues;

  ICollection customSections = ingSpec.ExtendedAttributeSections.OrderedValues;

  ICollection customSections = ingSpec.ExtendedAttributeSections.ModifiableValues;

  Can you please let us know if this is a bug in the product? or is it possible that we can do our custom code works for the old specifications?

  Can you also let us know which table stores information about order of custom hardware specifications section?

  Thank you

  Mani

  Sounds like the same issue post to https://community.oracle.com/thread/3804143.

  Thank you

  Pourbaix

• HP 6515 eprint printer question

  Product: HP 6515.

  This printer should print trays; Article and photo 4 x 6.

  If the printer has intelligence that he can understand the difference between an attachment of type of document such as .doc and image such as .jpg attachments, so that it can send it to the correct tray.

  I'll put this to my mother, who is 95, lives in another State and the disputed technology, so that the family can take pictures and send them to him.

  I want just an attachment to print on the correct tray based on the format.

  Thank you

  Hi rpm4fsu,

  I have good news for you! On the 6515 (and other Photosmart printers with a separate photo tray), photo of the attachments sent to ePrinting should automatically move the photo tray. Document files (.doc, .pdf, etc.) should print to the main paper tray.  I hope that helps!

• Panorama of printing question lightroom cc epson r2880

  I tried to print a large panorama (13' x 48 ") on roll of paper on an Epson r2880 lightroom cc. It seems that all the settings are correct (I think) and I can't seem to print correctly never! summer wasting a lot of paper! at the start of the image to print, it spits out about 24 "white paper then to print from the center of the image? for some strange reason, it will not print the first 24 "of the image! I really have no idea...

  Lightroom CC, Macbook Pro 8.2, Epson r2880 all with current drivers running

  stevenm27077224 wrote:

  I tried to print a large panorama (13' x 48 ") on roll of paper on an Epson r2880 lightroom cc.

  I think you mean 13 "x 48" (13' = 156 "length exceeds the maximum length of paper for the Epson R2880).

  Do scroll to the solution offered by btolley below and see if that helps. It is for LR3, but should always be applicable.

  R2880, paper roll, Lightroom? : printers and printing Forum: Digital Photography Review

• LR5 printing smaller images that that wanted to

  In the print Module, leaders tell me that my image is exactly 10 x 15 on support 13 x 19. Perfect.

  He printed 14 5/8 x 13 3/4. Is not perfect. It screws to the top of my mattress measurements.

  I use a Canon Pro9000 Mark II attached to an iMac OS X v10.9.4 running.

  13 x 19 is a custom size because LR or my printer does not have already as a standard size by default for some reason any. I recorded it using "0" for each dimension of the border.

  Can someone clarify this mystery? Thanks for taking a peek.

  Terry

  Make sure that you have not set up to do borderless printing paper. This will change subtly the size of your printed image. In addition, make sure you have no border of stroke, the photo border or the inner race for the image and that you set the size of the cell to exactly 10 x 15 instead of reading the leaders who are not very accurate. You can activate the option of Dimensions see the section guides. Also, paper 13 x 19 is often called A3 + in drivers Canon and it's often not exactly 13 x 19 ", but a metric size which is close to him.

• Black cartridge does not print.

  Model HP6510.  Black cartridge will not print computer or copy.    A new cartridge has been installed, but it prints just blank or a very light blue.  Yes, it is installed correctly.  The other three colors work very well.  Any help?

  Hello westielover,

  Welcome to the Forums of HP Support! I see that you recently replaced the black cartridge and you get blank pages or a very pale blue text. To better help you can you please let me know the Exact modelof HP printer that you are using?

  Please start here: printer does not print black ink or color of ink or prints blank Pages

  Let me know the results if you always work in printing questions reply back.

  Thank you

• HP 5530: HP 5530 won't delete print queue after printing

  5530 HP printer prints a work, but will leave the job in the printer queue.  It will not print another job, until it is removed from the queue manually.  How can I get the job to remove from the queue automatically once it is printed?

  Hello @G556,

  Welcome to the Forums of HP Support!
  
  I understand that you are experiencing print queue problems when you print to your HP ENVY 5530 e-all-in-one printer from your Windows 7 computer. I would like to help you to solve this problem today.

  Now, this question can go down to a conflict between your printer and computer driver or a problem on your computer Windows print spooler. The print spooler is the printing system built into Windows operating systems. It controls the printing for sending to printers. If there is a problem with the print spooler, you may notice different conflicts of impression.

  To begin, please can I you click here to run the Microsoft Fix it Tool. Once the site opens, under (2) select "Print, fax, scan, share and save. Then, under (3) select 'diagnose and automatically fix problems printing and printer'.  Select run now. Once you have downloaded the tool, please follow the instructions on the screen to run the FixIt tool. If there is no print or print spooler system issues this Microsoft Tool should fix it for you.

  If the problem persists, please can I you click here to download HP Print and scan of the doctor tool. This tool will be "difficult to print" questions for you. Any connection or software driver conflict must be detectable as printing HP and the doctor analysis tool will attempt to resolve these conflicts for you.

  Please reply to this message with the result of your troubleshooting. I look forward to hear from you!

• Cannot print from Internet Explorer 11 using HP LaserJet 200 color on Windows 7

  Who would be able to help me?

  When I want to print using Internet Explorer 11 on a Windows 7 PC, I can select Preview before printing, but when I actually want to print, it gives the error:

  "There was an internal error and Internet Explorer is unable to print this document."

  This error only occurs when the 200 HP LaserJet color is selected.

  I am able to print on our other HP printers, like the HP Color LaserJet CM4540 multifunction printers.

  I am also able to print on a printer using Chrome.

  If the problem seems to be related to Internet Explorer 11 in combination with 200 HP LaserJet color.

  I tried the 'standard' measures to resolve the issue, such as:

  1. disable Internet Explorer Protected Mode

  2. the value Internet Explorer default browser

  3 re-create the missing bass folder and define the level of integrity

  4. start Internet Explorer as an administrator

  This does not resolve the issue.

  Please notify. Thanks in advance.

  It is a problem with IE 11 on Windows 7 systems with no fix yet against MS.

  The following thread has had a problem like yours:

  http://h30434.www3.HP.com/T5/other-printing-questions/printing-stopped-working-in-IE11/TD-p/3549605