Fabric connecting LDAP authentication
Hi guys,.
I am running 2.0(2q) UCSM
I was wondering if there was a way of configuring LDAP authentication by logging in via SSH to the FIs?
I installed all group mappings and adds users to these groups without any problems, but I can't seem to figure out how to get LDAP for authentication when you use a session SSH on the FI.
Someone at - he put in place before?
Thank you
Doug,
Are you sure you are using the correct syntax when connecting via CLI?
If AD authentication works through the GUI, it should work in CLI.
Kind regards
Robert
Tags: Cisco DataCenter
Similar Questions
-
El Capitan LDAP authentication
I am trying to setup on El Capitan Macbook LDAP authentication. I've prepared OpenLDAP server on the Linux host with the necessary users. This LDAP was added in the directory as LDAPv3 with set of mappings of RFC2307 utility.
Computer can connect to LDAP, because green circle seen in there:
Users and groups > connection options > network server account > hostname of the LDAP server
The problem is that the user is unable to connect by using LDAP. No matter what I go to the login prompt (including complete DN), I can see say journal entry:
SecurityAgent: Unknown user 'adrian' connection attempt SPENT for the audit.
How can I review more about connection?
So that the own Apple Open Directory is based on OpenLDAP, it is not the same. Not only do you have conveniently add additional entries to OpenLDAP i.e. Apple own LDAP schema, but you also need to configure Kerberos on the Linux server as well as Open Directory uses a combination of LDAP and Kerberos for authentication.
In my view, it is possible to do all the extra steps to get a Linux server to fully act as the equivalent of an Open Directory server, but that you're barely at half way.
See - http://deepport.net/archives/setting-up-a-linux-server-for-os-x-clients/
and - http://www.torriefamily.org/~torriem/wiki/computer_stuff:opendir_and_ldap
These articles do not cover Kerberos, but perhaps of additional useful information for the previous link.
See - http://blog.michael.kuron-germany.de/2009/04/building-your-own-opendirectory-ser ver-on-linux /
-
LDAP authentication on vty router login
I'm trying to deploy authentication ldap (AD MS) for a connection vty router. I used the manual like this - http://www.cisco.com/en/US/docs/ios-xml/ios/sec_usr_ldap/configuration/15-2mt/sec_conf_ldap.html
But my scenario was unlucky
My config is...
_____
AAA new-model
!
!
AAA server ldap ad1 group
test server
!
AAA authentication login default group local ad1
AAA authorization exec default authenticated if
!
jump...
!
map1 LDAP attribute-map
user name of card type sAMAccountName
!
test LDAP server
IPv4 172.16.107.145
attribute map map1
Retransmission Timeout 20
bind authenticates root-dn CN = Administrator, CN = users, DC = fabrikam, dc = com password 7 02050D 480809
base-dn CN = users, DC = fabrikam, dc = com
_____
instead of "ldap attribute-map map1" I tried to use "search user-object-type-filter name. No effect
I used wireshark for sniffer of cisco to AD packages. No package at the port of AD (389 or 3268) have been captured.
I used the ldap debugging all the
This is the output
* Jun 9 19:38:45.414: LDAP: LDAP: AAA Queuing 117 of treatment application
* Jun 9 19:38:45.414: LDAP: received the queue event, new demand for AAA
* Jun 9 19:38:45.414: LDAP: LDAP authentication request
* Jun 9 19:38:45.414: LDAP: no attributes to check username mental health
* Jun 9 19:38:45.414: LDAP: name of user/password validation test failed!
* Jun 9 19:38:45.414: LDAP: LDAP not suport interactive logon
Note the last string. Is that what it means I can't use ldap for this?
What I've done wrong?
I am grateful for!
LDAP on IOS support is limited to the VPN authentication and unfortunately cannot be used for authentication of the Admin (exec).
CSCug65194 Document nonsupport LDAP for authentication of connection
AAA does not support using a LDAP method for interactive logon authentication. Customers can configure 'aaa authentication login default group ldap', but when an interactive session (Terminal) attempts to authenticate via the LDAP protocol, the
following message is syslogged:
"LDAP: LDAP does not support interactive logon [sic]."
This is due to the aaa/ldap/src/ldap_main.c of next record ldap_authen_req():
If (intf & intf-> ATS) {}
LDAP_EVENT ("LDAP don't suport interactive logon");
ldap_method_failover (proto_req);
Jatin kone
-Does the rate of useful messages- -
Asa and Cisco ldap authentication
Hi all
I have a problem with LDAP authentication.
I have a cisco Asa5510 and windows Server 2008 R2
I create the LDAP authentication.
AAA-server LDAPGROUP protocol ldap
AAA-server host 10.0.1.30 LDAPGROUP (inside)
Server-port 389
LDAP-base-dn dc = systems, dc = local
LDAP-naming-attribute sAMAccountName
LDAP-login-password *.
LDAP-connection-dn CN = users, OU = users, DC = network, DC = local
microsoft server typebut when I test, I have an error (user account work directly to the server)
AAA-authentication server LDAPGROUP host 10.0.1.30 userid password test *.
INFO: Attempt to <10.0.1.30>IP address authentication test (timeout: 12 seconds)
ERROR: Authentication rejected: not specifiedHelp, please
concerning
Frédéric
You have the account with username 'user' in ' 'reseaux.local' and "Utilisateurs.reseau.local '?"
If so, can you check if they are two other AD domain? The bug pointed out that ASA do not support authentication via LDAP refererals multi-domain.
You might consider to using an account administrator AD in "reseaus.local" for ASA to connect to AD.
10.0.1.30> -
Another failure of the LDAP authentication
I'm trying to setup LDAP authentication for my ASA, as well as the AD Agent. Currently my authentication fails with the following debug output...
[- 2147483610] Starting a session
[- 2147483610] New Session request, the 0xcc854d8c, reqType = authentication context
[- 2147483610] Fiber has started
[- 2147483610] Create LDAP context with uri = ldap://10.11.1.15:389
[- 2147483610] Connect to the LDAP server:
status = success
supportedLDAPVersion [-2147483610]: value = 3
supportedLDAPVersion [-2147483610]: value = 2
[- 2147483610] Liaison as a Sargent\
[- 2147483610] Authentication Simple for Sargent\ to 10.11.1.15
[- 2147483610] LDAP search:
Base DN = [DC = City, DC = charlottesville, DC = org]
Filter = [sAMAccount = sargentm]
Range = [subtree]
[- 2147483610] The analysis of returned search results State failure
[- 2147483610] Fiber output Tx = 308 bytes Rx = 677 bytes, status =-1
[- 2147483610] End of the session
ERROR: Authentication rejected: not specified
I can however run successful AD etc., queries using the following commands.
show the identity of the user ad-users city.charlottesville.org filter sargentm
Ideas?
Replace the below listed command within the parameters of the server:
sAMAccount name-attribute LDAP
With
LDAP-naming-attribute sAMAccountName
Note: the sAMAccountName is configured correctly.
Jatin kone
-Does the rate of useful messages-
-
Hello
I am able to get the LDAP authentication works for the VPN, but when I go to test a user that is not defined in the VPN group in the ad, they are still able to authenticate and access to the VPN. I'm at a loss for what is the real problem, because everything seems to be set correctly.
I joined newspapers in debugging ldap for a user that works properly and that a user that does not work properly. I think that they should be able to authenticate to a group JOB_ADMINS_VPN and if they are not in this group then they should be denied rights of VPN connection.
LDAP attribute-map JOB_ADMIN_MAP
name of the memberOf Group Policy map
map-value memberOf CN = JOB_ADMINS_VPN, OU = VPN, DC = test, dc = net JOB_ADMINS
AAA-server JOB_ADMINS protocol ldap
AAA-server JOB_ADMINS (Prod) 10.5.1.11
LDAP-base-dn DC = test, DC = net
OR LDAP-group-base dn = VPN, DC = test, DC = net
LDAP-scope subtree
LDAP-naming-attribute sAMAccountName
LDAP-login-password *.
LDAP-connection-dn CN = saVPNLDAP, CN = Users, DC = test, DC = net
microsoft server type
LDAP-attribute-map JOB_ADMIN_MAP
I don't know miss me something small, but I don't know what I'm missing. Any contributions to this number will be grately apperciated.
Thank you!
Please review the below listed config and see what hand you lack of other "sh run" of the SAA.
Configuration to limit access to a particular group of windows on AD
internal group noaccess strategy
attributes of the strategy group noaccess
VPN - connections 1
address pools no
LDAP LDAP of attribute-map-MAP
name of the memberOf IETF-Radius-class card
map-value memberOf
AAA-Server LDAP-AD ldap Protocol
AAA-Server LDAP-AD
Server-port 389
LDAP-base-dn
LDAP-scope subtree
LDAP-naming-attribute sAMAccountName
LDAP-connection-dn
LDAP-login-password
microsoft server type
LDAP-attribute-map LDAP-map
Group Policy internal
attributes of group policy
VPN - connections 3
Protocol-tunnel-VPN IPSec l2tp ipsec...
value of address pools
.....
.....
type of tunnel-group-remote access
global-tunnel-group attributes
Group-AD-LDAP authentication server
NoAccess by default-group-policy
!
!
attributes of the strategy group noaccess
VPN - concurrent connections 0
Jatin kone
-Does the rate of useful messages-
-
vCenter 5.5 and LDAP authentication
Hello
I'm new on using vCenter and had a quick question about LDAP authentication. I installed vCenter as a device on my ESXI server and it seems to work fine, but when I connect the web client to vCenter I have no single sign on options to enable LDAP authentication
So I did some research and a few posts mentioned that I had to enable SINGLE sign-on, so I have it configured as embedded will be fine then another message mentioned that I needed set up AD authentication on the vCenter server and ensure that the host to vcenter name was in the area...
So I want to only LDAP authentication, I don't want to join my VMs to the domain. So am I missing something?
Thank you
To be able to configure SSO, connect on the Web Client using the [email protected] account. With this account, you will be able to add your AD/LDAP as an identity Source and configure the permissions on the objects of the vCenter Server inventory...
André
-
For Cloud SGD LDAP authentication for users and administrators
Hello.
I recently completed the installation of my new cloud of SGD 12.1.0.3 on Linux 6.4 (on a virtual machine).
My question is if it is possible (and how) to enable authentication for new administrator SGD through LDAP accounts?
We have already our VM hosts configured to allow LDAP authentication to theirs, but how to configure WHO to enable LDAP authentication even as users of server? Because users are in LDAP, they do not have a local account on the servers, and we do not necessarily want users of WHO in order to connect the servers anyway.
One of the objectives to use LDAP is that we want to allow users to have only to change their domain/LDAP password and everything else is updated.
I see that when an account is created in the OMS, the user is created in the repository of OMS database. I really want to restrict not know them to log directly in the database, but do how this is possible. Can we still use pupbld for this? Probably not...
I read the book below the Oracle documentation, but it is for SGD 11.1 and I'm under 12.1.
But the same year, he was not very descriptive about how to set up.
It sounds almost as if you had to take the decision to use LDAP for the installation of beginning of WHO.
I hope not, and I do not remember that as an option that I have installed the SGD.
Yes, you can still integrate with LDAP. Please see the documentation here
http://docs.Oracle.com/CD/E24628_01/doc.121/e36415/sec_features.htm#CJAGHGAH
EM use WLS for authentication, so everything that is supported by this version of WLS will work. Documentation received instructions for OAM/OID/HAD and Active Directory are specified.
Users can be changed to type external if they are already created in the repository with the appropriate connection name. Otherwise, new users can be created.
Also be sure to examine the external roles option, which allows you to map a LDAP group to an external role in EM by using the same name and automatically assigning the privileges required by this group.
-
Successive connection LDAP fails after the first LDAP authorization: with wrong password
Hello
I am currently integration Oracle CC & B utility to LDAP (Sun Directory Server java - SunOne), but I made a post here because CC & B delegates the task of authentication to the server Weblogic (I user WLS version 10).
In Weblogic, I configured two authentication providers:
1. the principal is the LDAP authentication provider (defined as optional control indicator)
2. secondary education is the default authentication provider (defined as optional control indicator)
Currently, some users of CC & B are stored in LDAP, and some other (more users system) are stored in the default authentication provider.
To help you make the problem more clear, I did the test with followingscenario:
1. user LDUser2 (stored in LDAP) login with correct passwrod-> success
2. the sysuser user (stored in the default authentication provider) connect with incorrect password-> access denied (what is good and normal)
3. the LDUser2 (stored in LDAP) user login with password-> successful OK
4. the sysuser user (stored in the default authentication provider) connect with correct password-> successful OK
5. the user (stored in LDAP) LDUser2 connect with the incorrect password-> denied access, which is normal. However, from this point, the problem starts
6. the user (stored in LDAP) LDUser2 connect with the right password-> rejected access KO is the problem
7. connection (also stored in LDAP as LDUser2) LDUser1 with the right password of the user-> big problem of access denied KO
8. the LDUser7 user (stored in the default authentication provider) connect with the right password-> successful access
9 restart the server resets the situation, but once a user is stored in the LDAP connection with a wrong password (5 point number), attempts by users stored in LDAP fail.
It seems that after the first LDAP authentication with wrong password, all users stored in LDAP connection attempts will fail.
Help, please.
Thank you.
JeffryHello
The connection attempt is made on console weblogic with the same result?
If I'm not wrong, until WLS 10.3 it is a problem reported where once the user connects with password and username incorrect, all attempts after that results in the failure of the connection.
The patch is available with up to 10.3 WLS support
This might be the question however need to check.
-
LDAP authentications fail in APEX
Is - this 11g support LDAP XE Beta?
We have a number of internal applications works well in the installed 4.0.2.00.07 in Oracle 10 g XE APEX.
Once imported into a new box running beta 11g XE, LDAP authentications fail always, even if the same treatment of connection parameters are used. Someone told LDAP works in APEX to 11g XE?
ColinHi Colin,
Although I have not tested with 11g XE, 11g supports in general always LDAP. However, starting with 11 GR 1 material (and the current beta version is based on 11 GR 2) you must define ACLs for network access. If you have not done this, you will get no LDAP connection in the database. It is quite a good example of it in the Guide of Installation of APEX: http://download.oracle.com/docs/cd/E17556_01/doc/install.40/e15513/otn_install.htm#BABBHCID
I think it is a good example and can be adopted for other users of the database easily.
If this is not the solution in your case, please post the error message only when authentication fails.-Udo
-
Can anyone help me please with the fields required for LDAP authentication. My network administrator has sent me the following
LDAP://xxx.xxx.XX.x:389 / o = companyname? UID
Should the host be ldap://xxx.xxx.xx.x or just xxx.xxx.xx.x?
What looks like the DN? Wouldn't be just o = companyname, uid = % LDAP_USER %?
I tried a bunch of different scenarios against the LDAP test, but not luck. I checked THAT LDAP is working properly by means of other applications that use it.First, use Google for some free LDAP viewers. Those who will help a lot, and they usually work approximately 30 days before you have to pay to save them.
Then, specify the address of the LDAP server in the program, connect and try to find your information. My big problem has tried to get all understood, was that I also had to precede the domain name, something like user domain\username. Once I saw that in the LDAP viewers, and I used the same formula in my authentication routines, everything worked perfectly.
Among the free that I used was called LDAP administration tool.
Hope this helps, get LDAP working has been a huge headache until this.
Bill Ferguson
-
LDAP authentication TWICE - authentication by default custom and Oracle?
Hi all
I have create an application with 2 pages (including the login page). My login page customized (for example...) 101) uses the authentication scheme that is customized with LDAP authentication.
My question is...
When I put in my URL of the login page in IE. Apex always redirect me to another page of connection (it looks like the default Oracle login page). The URL is http://xxxx.com/pls/apex_dev/wwww_flow_custom_auth_std.login_page?...
After I entered the username and password, it transfers me to my custom login page. Again, I have to enter the same username and password... Can someone tell me how can I remove/disable the default Oracle login page? Because I don't want to authenticate LDAP in TWICE. I'm really grateful if anyone can guide me how to turn off in detail.
Thank you mnayThe Sessison. not valid Page in the authentication scheme must be set to 101 (from the selection list). Is it? There should be nothing in the invalid Session of URL attribute.
Scott
-
AnyConnect user using the user certificate authentication and LDAP authentication
Hello
I'm trying to implement the Anyconnect VPN for my office. Now, I want the user to authenticate the user certificate based (which is install user local system are we) CN value and LDAP authentication. A help how to achieve this requirement. We install Certificate ROOT and INTERMEDIATE Godaddy and even already installed ASA. Also, we have the user certificate installed on each system user to authenticate the user.
Any help please.
Hi subhasisdutta,
This link will certainly help you with the configuration:
http://www.Cisco.com/c/en/us/support/docs/security/AnyConnect-secure-mob...
Hope this info helps!
Note If you help!
-JP-
-
ASA5510 ldap authentication: out of memory error
Hi all
I have a problem in the ldap authentication.
When I try the test of authentication I get this error: "Authenticatione rejected: out of memory error.
What it means? Is that a response from the server?
RADIUS authentication to the same server works very well.
The ASA version is 8.0 (4) and asdm version 6.2 (1).
same problem, version 8.2
-
Help: creating a custom LDAP authentication
Hi all
For some reason I need a LDAP authentication against 2 host servers.
For this reason that I wrote a function with 2 parameters of user and password. This function is to search on a server to which the user can find and make a simple_bind on the server, return true to bind with success and false for failure.
In the next step, I created a new authentication scheme "Based on the pre-setting plan of the Gallery", entered a name and selected "Custom" as the type of regime.FUNCTION LDAP_AUTH_GLOBAL_DOMAIN ( pUser IN VARCHAR2 , pPassword IN VARCHAR2 ) RETURN BOOLEAN IS l_retval PLS_INTEGER; l_session DBMS_LDAP.session; l_ldap_port VARCHAR2(256) := '123'; l_ldap_host VARCHAR2(256); l_ldap_user VARCHAR2(256); l_ldap_passwd VARCHAR2(256); v_login VARCHAR2(256); v_login_result boolean := FALSE; v_domain VARCHAR2(100); BEGIN BEGIN v_domain := GET_DOMAIN_OF_USER( pUser => pUser ); v_login := v_domain || '\' || pUser; IF lower(v_domain) = 'mydomain' THEN l_ldap_host := 'host.mydomain.com'; ELSIF lower(v_domain) = 'mydomain2' THEN l_ldap_host := 'host.mydomain2.com''; END IF; DBMS_LDAP.USE_EXCEPTION := TRUE; -- l_session := DBMS_LDAP.init( hostname => l_ldap_host, portnum => l_ldap_port); l_retval := DBMS_LDAP.simple_bind_s( ld => l_session, dn => v_login, passwd => pPassword ); v_login_result := TRUE; l_retval := DBMS_LDAP.unbind_s( ld => l_session ); EXCEPTION WHEN OTHERS THEN v_login_result := FALSE; END; RETURN v_login_result; END LDAP_AUTH_GLOBAL_DOMAIN;
The next page, I even ask some values:
Function name Sentinel-> what I have to do or is there a default check when I leave it empty
Name of procedure no valid Session-> y at - it a default value, when it is empty
Name of the function of authentication-> I entered: "return my_auth (: username,: PASSWORD) ' or 'return my_auth' or 'my_auth '.
Name of the Logoout post-> procedure y at - it a default value, when it is empty
Activate the attributes Legacy authentication-> does this mean?
On my login page existing I changed nothing, so I still have my processes:
The Username Cookie value:
Login:begin owa_util.mime_header('text/html', FALSE); owa_cookie.send( name=>'LOGIN_USERNAME_COOKIE', value=>lower(:P101_USERNAME)); exception when others then null; end;
I'm a little uncertain about this logon process, should I change this?wwv_flow_custom_auth_std.login( P_UNAME => :P101_USERNAME, P_PASSWORD => :P101_PASSWORD, P_SESSION_ID => v('APP_SESSION'), P_FLOW_PAGE => :APP_ID||':1' );
I've never used custom authentication and cannot find a step-to-step tutorial, by saying what needs to be done.
Thanks for your help
ChrissyDon't know if this is the case, but I think that your authentication functio signature should be:
FUNCTION LDAP_AUTH_GLOBAL_DOMAIN (p_username IN VARCHAR2, p_password IN VARCHAR2) RETURN BOOLEAN
Maybe you are looking for
-
Password Protection for hard drive on the Libretto U100
I want to protect my data in the event that I should lose my U100. Initially, I asked a password to the Bios, which is quite easy using Toshiba Assist/user password. But even better would be to apply the same password on the hard drive as well. On th
-
Ignore an incoming call while the phone is locked.
Well, here's a strange... I noticed yesterday that there is no option to ignore a call if the screen is locked. You can just flick the icon upwards to meet. Or you can press the ringer switch, but it still vibrates until the call goes to voicemail. S
-
I need the driver for ethernet controller, controller of communication simple pci, bus controller sm, universal series for hp pavilion sleekbook 15 b002tu host controller. ethernet controller hardware ID; PCI\VEN_10EC & DEV_8136 & SUBSYS_18FE103C & R
-
How to change the color of the front panel Thank you prashhhhh
-
To present windows defender and the Bulldog are run on my antispyware that should I cancell