Elements of the Prime Minister is delayed when the video playback

Similar Questions

• Why not load not Photoshop elements 11 and Prime Minister 11 elements?

  I just bought Photoshop elements 11 and Prime Minister 11 elements.  I have Windows 7pro, have the disc for Windows and the serial numbers for both programs.  When I put the disk, I can't go past the Welcome screen.  Why?

  
  

  Access your cd using your file browser > click with the right button on the Setup file > click 'run as administrator '.

• Re: Satellite L650-165 - blue screen during the video playback or games

  Hello

  In October, I bought my L650-165. However, since then, I was faced with the blue screen of death. This happens when either video playback, streaming video or play Football Manager 2011 (video game).

  I think that my problems are all the graphics card related. However, I am really at a loss. I've always used Tosh laptop computers but this problem starts to grate. I keep coming back to my trusty 5 years Equium!

  I'm not that great with Windows 7, so I would appreciate any pointers or possible solutions.

  Thank you

  Cess

  Hello

  I had the same problem with my a500 due to a graphics card driver. Try to update:

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

• AirPlay button appears in the video playback controls

  We proabbly want right? Or, maybe you would. Maybe make this configurable user?

  Thank you

  -Mark

  You are on iOS 6? Looks like something Apple has re-added to the video playback control. I doubt that we have control over it.

  Neil

• My DVD Photoshop elements 11 handset & Prime Minister 11 elements, only the photoshop one figure in all programs and I can't edit my videos.

  Hello.

  MY DVD is a software combine Adobe Photoshop elements 11 and Adobe Prime Minister 11 elements. I do not see adobe Prime Minister 11 items listed in my all programs. I started to edit some of my photos with Photoshop software and so far all is well. But today want to give a go for video editing, I found that the software does not allow me to do. I use my new laptop HP Envy that I bought recently with the idea of learning to edit my videos.

  Any help will be most appreciated,

  zoraidaq

  What computer operating system?

  Excuse the question, but I don't want to take anything for granted. Did you install Adobe Premiere elements 11? This is a separate installation.

  If you did...

  Assuming that Windows 7, 8 or 8.1 64 bit for now, when you go to configuration/program Panel is Adobe Premiere elements 11 listed?

  And...

  If you go to

  Local disk C

  Program Files

  Adobe

  Adobe Premiere Elements 11

  Do you find a file in the Adobe Premiere elements 11 folder named Adobe first Elements.exe? If so, please double-click that. Does

  First elements 11 open to the workspace without going through the home screen?

  What happens if you insert the installation of Adobe Photoshop elements Adobe first Elements11 11 disc into the burner tray, select Adobe Premiere Elements

  11 for the installation? If the installation proceeds or are meet you a process that wants to uninstall instead of install?

  Please review and consider. Then based on your answers, we can then decide what.

  Thank you.

  RTA

• Why the video playback quality is not as good as the source?

  Hello.  I'm not new to PrE but I'm new to the forum.

  I use the 2 pre for about 7 years.  I got a newer computer running Windows 7 and basically was forced to move to 12 meadow because PrE 2 does not work very well on the newer machine. Once I installed pre 12, I couldn't wait to jump in my first draft on this machine.

  I expect that with a more recent machine and the latest version of the software, I would get outstanding results - hopefully much better than what I always got with 2 pre on the old machine.  With pre 2, it was not uncommon that the imported video seemed frozen during playback or for some other reason seemed not as good as the video source.

  Unfortunately, the new results were no better than the old.  So, I went to the machine (even newer) my wife running Windows 8 and got the same results.  Then I thought that maybe the DVD release would be better than what I saw in the pre Editor.  No dice.

  The video quality of the source is not the largest (see below), but I was expecting that the pre 12 would no more hurt.

  What has gone wrong?

  Here's what I'm working with the current project:

  Machine 1:

  HP EliteBook 8560w

  Processor 2.8 GHz Intel Core i7 - 2640M

  Windows 7 Enterprise SP1

  2 GB OF RAM

  360 GB of available disk space

  Machine 2:

  Dell Inspiron 3521

  Intel Pentium 1.8 GHz CPU 2117U

  Touch screen of Windows 8

  4 GB OF RAM

  + 400 GB HD space

  Video source:

  iPhone 4 video (MOV format)

  Thanks for ANY help you can give me.

  BTW, I noticed that Steve Grisetti is one of the frequent speakers on this forum.  In case you're reading this, Steve, I want to thank you and Chuck E. for your pre books.  I bought one several years ago and found it very useful.  And surprisingly, I found that with pre 12, I could always use the book that I bought before because the majority was still with the new software.  Still a great buy!

  kcarter

  Please excuse if I talk about things that you may already be aware of, but I didn't take anything for granted.

  The RAM installed on the computer 1 is too low for the work of the HD, and I wonder about the CPU on Machine 2, even if it has installed more RAM on the Machine 1. For now, I'll ignore the usual exercises and get the project settings and media source.

  1. from what I can put together, your support of the source of the iPhone 4 is 720 p at 30 frames per second. This usually means a variable rate which can be problematic for Premiere Elements. The variable can lead to audio out of sync, but not necessarily. If all else fails, then it is on the brake hand or similar to change the variable in a constant rate.

  2. one of the features of the version 11 and 12 is the program of support for the definition of the project parameter based on the properties of the video first drag in the timeline. A few times he made it OK, sometimes not. When not, and then you set the preset manually project yourself based on what you know to be the properties of your source media. Please see the following which includes how to define the project preset manually.

  http://www.atr935.blogspot.com/2013/04/pe11-accuracy-of-automatic-project.html

  From what I read on the iPhone 4 video properties, I suggest the project preset (assuming an NTSC set up)

  NTSC

  AVCHD

  AVCHD LITE 720p30

  One of the important things to remember is that 11 items first and 12 have as their default project preset

  NTSC

  AVCHD

  Full HD1080i30

  not the NTSC DV Standard and versions prior to version 11.

  When the 11 and 12 do not receive the automatic correct preset project, they don't give you the closest fit, rather than they give you their

  by default NTSC AVCHD Full HD1080i30 that will not suit for 720 p video.

  Classically, it is written if you have the right predefined project, you should have no colored line on content when you import video

  manually defined timeline. But, just the variable rate may trigger the unreturned indicator (orange instead of red in versions 11 and 12).

  So make the timeline would be indicated for the best possible overview in these circumstances.

  You have the latest version of QuickTime installed on one of your computers?

  Later.

  RTA

• Help: color on the video playback is seriously affected.

  Hello, I am new to both the elements and these forums. I will do my best to provide adequate information about my computer so all you tech wizards can help me.

  First of all, the problem: when I play my video after removing my files support, color is strongly tinged with a color teal-ish. When I stop it, it seems normal, but the color turns off again when I play. Here's what it looks like when he suspended: http://i28.tinypic.com/15ekbau.png . And here's what it looks like when I play: http://i32.tinypic.com/mb7sxg.png . Now, if it is a simple matter to solve (which I hope it is), I hope someone could provide assistance without having to do a lot of reading and did me a lot of research and typing.

  I understand the more information I can give, the more easy it I have someone to help him. Well, I'll try to give what I have.

  My computer is a Dell Inspiron 1525, procesor Intel (r) Core (TM) 2 Duo CPU T8100 2.1 GHz with 3 GB of RAM. I run Windows 7, and I'm not very knowledgeble about computers, even though I know and understand most of the bases.

  Here's what I'm trying to do: I'm a gamer and I'm trying to potting it recorded videos of the gameplay of my Xbox 360 on video sharing sites. I EU, of course, my Xbox 360 and to record the gameplay I use a Hauppauge HD PVR recorder. I save the videos to my computer, and then I pull into my editor Adobe Elements, where I currently have this problem. I think THAT the format of my recordings PVR in is what we call M2TS. At least this is what the video says in its details. I pulled upward on the element to the 1080i AVCHD format editor. Don't know if that's the problem.
  
  Let me know if I need to provide more information. Thank you very much for the shot, I understand that many of you put a lot of effort in helping people solve their problems, thank you very much to do! Here, any help would be appreciated.

  Question side: is there a way to edit the video to be read at a faster speed? Like to take 60 seconds of video in real time and convert every 15 seconds (fast movement, instead of slow motion)?

  To make the video play more fast using the time stretch tool (right click on the item in the Assembly). To compress the 60 seconds at 15 use a value of 400%.

  See you soon,.
  --
  Neale
  Insanity is hereditary, get you your children

• can hear the video playback, but do not see it! Help!

  My hp camera, I have several videos.  When I transfer to the computer and play them I can hear audio, but not see the video... just a black screen.  After some googling, I figured out to re - format my sd card to be compatible with vista, so now I take videos play, but I need to know how to read downloaded videos on the computer until the card has been reformatted.  Thanks in advance for any help, as I am now just frustrated by this whole process.

  My hp camera, I have several videos.  When I transfer to the computer and play them I can hear audio, but not see the video... just a black screen.  After some googling, I figured out to re - format my sd card to be compatible with vista, so now I take videos play, but I need to know how to read downloaded videos on the computer until the card has been reformatted.  Thanks in advance for any help, as I am now just frustrated by this whole process.

  N ° do not jump again.
  Discover your videos file extension. The video format must be supported by Windows Media Player or Movie maker to be able o see the video.

  Get a FREE video converter and converter of your videos in wmv format. WMV format is the most reliable format for Vista.

  t-4-2

• Green flash player from Adobe during the video playback screen

  Hello

  
  I get this green screen when I play videos on my IE9 browser on a desktop computer Win 7 (64-bit). This Green screen during playback of a video that uses the Adobe flash player (version 11.5.502.146), but it happens only after the first part of the video (entire video is already loaded) is played and the rest of the green screen video and plays accelerated, as if she was fast forwarded. The audio of the video is also affected as he plays static of different frequencies.
  The videos that I watched come from http://xin.msn.com/ and http://www.youtube.com/. I also tried to solve this problem with disabling hardware acceleration in flash player menu and uninstall and reinstall and then restart the computer, which are both different attempts that did not solve the problem.

  Help solving this problem on site will be greatly appreciated.

  Thank you very much

  Please try the solution described in the post below and let us know how it works for you.

  http://forums.Adobe.com/message/4865912#4865912

  Thank you

  Chris

• Drag the video playback issues

  Sometimes the slide video will stutter and display the word "loading" on the screen. He usually picks up self after about 3-4 stutters. It's quite boring for us, developers and for the customer. Any suggestions? Thanks in advance.

  It is more a question of bandwidth a matter of Captivate.

  What flow rate reading made you video?  If you created the video in order to demand a continuous strip of 300 kilobits per second, but the bandwidth available to the location of the video file is only 250 Kbps, then you're going to get buffering.

  Bandwidth is a constant problem for video content.  You should err on the side of caution when you design your content and allow pipes less than optimal.

• Problem with the video playback PC on Toshiba 43PH46P projection TV

  Hello

  first sorry for my English, but I hope you understand most ;)

  Currently, I'm trying to connect my Projection TV with my PC.
  Model: Toshiba Projection color TV 43Ph46P

  Because the doesn´t TV have a VGA-Plugin, I made a connection to my Pc with an adapter:

  http://www.Amazon.de/KanaaN-composite-video-Konverter-SCART-adapter/DP/B003U0PHC8/ref=sr_1_1?ie=UTF8&QID=1372072707&SR=8-1&keywords=adapter+SCART-VGA

  The Catalyst Control Center detects the TV after using the function "display to detect.
  After that I added the TV via 'extend' everything seems to be ok (on the PC side)

  But (there is always a but) I can not find the PC on the TV. I tried all channels (Ext 1-4 + other) but still had the blue screen.

  So, I could use help ;)

  Thank you
  Carter

  I don t think you have many options on the TV.
  What you have to do is to choose the right channel to the TV input.
  Everything else needs to be done on your PC.

  You the video signal correctly?
  I have no idea how it works on your computer, but on Toshiba laptops, you must activate the video using the function key (e.g. Fn + F5)

  Probably you don't have on your computer

• The video playback from a USB Pendrive on Ipad

  I would like to play videos that are on my USB on an Ipad. Is - it possible, and if so, how can I do.

  It is not possible.

  You can fool, but you can't play from USB, the file must be on your iPad.

  What you do is take your video files, giving them a name of 8 characters (basically you trick the ipad into thinking that you import videos you shot with your camera, you need to duplicate a naming convention... camera a folder named DCIM, then the files whose name of 8 characters.)

  You will then import the files on your ipad. Open them in the photos app, which might make it appear the video application and allow you to watch.

  And I do not recommend a USB port but using a SD card since most hard drives USB trigger a failure ' device requires too much power.

  On the other hand, you could look in various wireless flash or hard drives, the Kingston WiDrive is just an example. They work by creating a wifi hotspot localized you connect your iPad to and then use the app to send the content.

• Where is the video playback controls?

  I use presenter 11.  I can import a video, but is there no option to add commands of the video itself?

  Yes, I want to...  I don't want the video to start playing until the user click a button "play" after further events took place.  Now it starts at present slide shows.

  The difficulty that I have found is simply to use the PowerPoint video widget.

• Installation of Dreamweaver CS6 on Lion seems to have broken the video playback

  Last night I was able to play videos on the Adobe site (for example, CS6 & Creative characteristic cloud Tower for the Web) on Safari and Chrome. After downloading and installing Dreamweaver CS6, I can't play these videos. Loading of the page, but the display still blacked out. I checked that I was still able to play the videos on another computer on the same local network. Also, I have confirmed that I can still play videos on YouTube. It just seems to be the Adobe website that broke.

  My computer is a Mac Pro running OS X Lion. I installed CS6 using an administrator account and restarted after the complete installation.

  Anyone run into a similar problem?

  Please try to install it. Maybe it's just a coincidence that just before the download of Dreamweaver, I could see the videos and after installation, I could not. These things happen, unfortunately.

  I found some similar problems in any other Forums Adobe. I went into the settings of the Flash, active the option to third parties save Flash components and added tv.adobe.com and images.tv.adobe.com as trusted sites. Now I'm able to view the videos again.

• When I try to run Photoshop elements 11 and Prime Minister 11 items I get error 213:11.

  How can I fix?

  See if the following help document is of no help:

  http://helpx.Adobe.com/Creative-Suite/KB/error-store-does-not-allow.html